Monitoring Stability and Sizes of Au/Pd Core/Shell Nanoparticles by SEC

This paper describes how size exclusion chromatography (SEC) can be used to rapidly characterize Au/Pd core/shell nanoparticles (NPs). We monitored the sizes of Au/Pd core/shell NPs by effecting SEC separation using a mobile phase of 10 mM sodium dodecyl sulfate (SDS); the plot of retention time with respect to the standard size of the Au NPs was linear (R ² = 0.991) for diameters falling in the range from 12.1 to 59.9 nm; for five consecutive runs, the relative standard deviations of these retention times were less than 0.4%. Under the optimized separation conditions, we found that the addition of the surfactant SDS stabilized the Au/Pd core/shell NP samples. In addition, SEC analysis revealed that the sizes of the Au/Pd core/shell NPs could be controlled via modification of the rate of addition of the reducing agent and the use of adequate volumes of the seed and shell precursor metal ion solutions. When using these conditions to analyze the Au/Pd core/shell NPs produced through seed-assisted synthesis, a good correlation existed between the sizes determined through SEC and transmission electron microscopy. Our results suggest that SEC is a useful technique for monitoring the sizes of NPs and nanomaterials in general.     

Influence of hydrophobic alkylated gold nanoparticles on the phase behavior of monolayers of DPPC and clinical lung surfactant

The effect of hydrophobic alkylated gold nanoparticles (Au NPs) on the phase behavior and structure of Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) and Survanta, a naturally derived commercial pulmonary surfactant that contains DPPC as the main lipid component and hydrophobic surfactant proteins SP-B and SP-C, has been investigated in connection with the potential implication of inorganic NPs in pulmonary surfactant dysfunction. Hexadecanethiolate-capped Au NPs (C(16)SAu NPs) with an average core diameter of 2 nm have been incorporated into DPPC monolayers in concentrations ranging from 0.1 to 0.5 mol %. Concentrations of up to 0.2 mol % in DPPC and 16 wt % in Survanta do not affect the monolayer phase behavior at 20 °C, as evidenced by surface pressure-area (π-A) and ellipsometric isotherms. The monolayer structure at the air/water interface was imaged as a function of the surface pressure by Brewster angle microscopy (BAM). In the liquid-expanded/liquid-condensed phase coexistence region of DPPC, the presence of 0.2 mol % C(16)SAu NPs causes the formation of many small, circular, condensed lipid domains, in contrast to the characteristic larger multilobes formed by pure lipid. Condensed domains of similar size and shape to those of DPPC with 0.2 mol % C(16)SAu NPs are formed by compressing Survanta, and these are not affected by the C(16)SAu NPs. Atomic force microscopy images of Langmuir-Schaefer-deposited films support the BAM observations and reveal, moreover, that at high surface pressures (i.e., 35 and 45 mN m(-1)) the C(16)SAu NPs form honeycomb-like aggregates around the polygonal condensed DPPC domains. In the Survanta monolayers, the C(16)SAu NPs were found to accumulate together with the proteins in the liquid-expanded phase around the circular condensed lipid domains. In conclusion, the presence of hydrophobic C(16)SAu NPs in amounts that do not influence the π-A isotherm alters the nucleation, growth, and morphology of the condensed domains in monolayers of DPPC but not of those of Survanta. Systematic investigations of the effect of the interaction of chemically defined NPs with the lipid and protein components of lung surfactant on the physicochemical properties of surfactant films are pertinent to understanding how inhaled NPs impact pulmonary function.     

Films and composites of gold nanoparticles stabilized by abietic acid

We studied the usefulness of dispersions of gold nanoparticles (Au-NPs) stabilized by abietic acid for manufacturing films on glass and silicon substrates and composites with nanosized and powder materials exemplified by SiO₂ and TiO₂ NPs, expanded graphite (EG), carbon nanotubes (CNTs), a porous carbon material (PCM), PCM containing 6% nitrogen, and CeO₂ powder.     

Retention of enzymatic activity of alpha-amylase in the reductive synthesis of gold nanoparticles

In this paper, we report the generation of Au nanoparticles (NPs), using a pure enzyme for the reduction of AuCl4(-), with the retention of enzymatic activity in the complex. As a model system, alpha-amylase was used to readily synthesize and stabilize Au NPs in aqueous solution. Although several other enzymes were also pursued for the synthesis, it was interesting to observe that only alpha-amylase and EcoRI could produce Au NPs. Following NP synthesis, the activity of the enzyme was retained in the Au NP-alpha-amylase complex. The presence of Au NPs and alpha-amylase in the complex was established by UV-visible and FT-IR spectroscopy, X-ray diffraction (XRD) and transmission electron microscopic (TEM) measurements. Our observations suggest that the presence of free and exposed S-H groups is essential in the reduction of AuCl4(-) to Au NPs. Structural analysis of the enzymes showed that both alpha-amylase and EcoRI enzymes have free and exposed S-H groups in their native form and thus are suitable for the generation of NPs, whereas the other ones used here do not have such groups. Fortuitously, the enzymatic functional group of alpha-amylase is positioned opposite to that of the free and exposed S-H group, which makes it ideal for the production of Au NPs; binding of the enzyme to Au NPs via Au-S bond and also retention of the biological activity of the enzyme.     

Synthesis of gold nanoparticles stabilized with di-(2-ethylhexyl)dithiophosphoric acid and tris(2-aminoethyl)amine

Methods for preparing gold nanoparticles (NPs) surface-stabilized with di-(2-ethylhexyl)dithiophosphoric acid (DTPA) and tris(2-aminoethyl)amine (TAEA), which endow the nanoparticles with hydrophobic and hydrophilic properties, are described. In the case of DTPA, Au-NPs are first synthesized with surfactant shells by means of reducing [AuCl₄]^? with hydrazine in inverted micelles of oxyethylated Triton N-42 in a low-polarity medium of decane; then, the micelles are destroyed by polar chloroform in the presence of DTPA, which has a great affinity to gold due to its sulfur donor atoms and substitutes for the surfactant on the surface of the nanoparticles. In preparing hydrophilic nanoparticles, [AuCl₄]^? is reduced with solid NaBH₄ directly in a nonaqueous solution of TAEA based on an ethanol and 2-propanol (3: 10) mixture. The nanoparticles are characterized by elemental analysis (for Au, C, H, N, and Na), X-ray powder diffraction, electronic absorption spectra, IR spectra, photon-correlation spectra, and transmission electron microscopy (TEM).     

Photorecovery of nanoparticles from an organic solvent

Commercial silica nanoparticles were dispersed in toluene, stabilized by a mixture of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and a photolyzable anionic surfactant sodium hexylphenylazosulfonate (C6PAS). Selective photolysis of the interfacial C6PAS component induces colloid instability, resulting in flocculation and eventual phase separation of the silica nanoparticles. UV-vis spectroscopy was used to follow the photochemical breakdown of C6PAS; diffusion coefficient measurements by dynamic light scattering were employed to monitor the photoinduced flocculation; and silica contents in the toluene, before and after UV light irradiation, were determined gravimetrically. The results show that light can be used to trigger separation and recovery of nanoparticles stabilized by photolabile interfacial layers.     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性,使其在高矿化度盐水中可以稳定存在的前提下,研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果.研究结果表明,无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用,且矿化度越高,屏蔽效果越明显,从而混合溶液更易于在高盐水中稳定;纳米颗粒表面的活性剂吸附层受二者浓度的影响,进而影响了颗粒的亲/疏水性;当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时,混合溶液与CO₂的界面张力高于单独活性剂溶液,而当活性剂浓度高于CMC时,对CO₂-溶液界面张力几乎无影响,最低界面张力可降至6 mN/m左右;改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上,但受二者浓度比例的影响;纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度,最大增幅由20 mPa·s增至55 mPa·s左右,泡沫黏度增加接近3倍,增强了CO₂泡沫驱的封堵作用.     

On-line enhancement and separation of nanoparticles using capillary electrophoresis

We describe a rapid, simple, and highly efficient capillary electrophoresis (CE)-based method for the analysis of nanoparticles (NPs). In this study, we used the reversed electrode polarity stacking mode (REPSM) of CE to assess the feasibility of enhancing the detection of Au NPs and Au/Ag NPs, optimizing parameters such as the length of time for which the REPSM was applied, the concentrations of the buffer and the sodium dodecylsulfate (SDS) surfactant, and the pH. Under the optimized on-line enhancement conditions [buffer: SDS (40 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 10.0; applied voltage: 20 kV; REPSM applied for 24s], the detection limits of the Au NPs and Au/Ag NPs increased by ca. 30- and 140-fold, respectively. In addition, when the NPs were subjected to on-line enhancement and separation by CE using diode array detection (DAD), this approach allowed chemical characterization of the NP species. Our results suggest that such CE analyses will be useful for accelerating the rates of fabrication and characterization of future nanomaterials.     

Recycling nanoparticles stabilized in water-in-CO2 microemulsions for catalytic hydrogenations

Catalytic hydrogenations of olefins took place effectively in supercritical CO2 with Pd0 nanoparticles dispersed in the fluid phase using a water-in-CO2 microemulsion consisting of water, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) as a surfactant, and 1-octanol as a cosolvent. The hydrogenated products dissolved in supercritical CO2 can be separated from the octanol solution containing AOT microemulsions with Pd0 nanoparticles by phase separation (upper phase, supercritical CO2 with hydrogenated products; lower phase, 1-octanol containing AOT microemulsions with Pd0 nanoparticles) accompanied by reduction of CO2 pressure. After collecting the hydrogenated products by flowing the upper CO2 phase to a collection vessel, the Pd0 nanoparticles remaining in the lower phase can be redispersed into supercritical CO2 by pressurizing the system to a pressure where a homogeneous phase is attained. The redispersed nanoparticles can be reused as catalysts for the next runs of the hydrogenations. Triphenylethylene was hydrogenated to 1,1,2-triphenylethane at conversions of 100% (1st-3rd runs), >99% (4th run), and >96% (5th run) using the recycled Pd0 nanoparticles. The feasibility of using other organic solvents as cosolvents is also studied in the present paper.     

Lipase-catalyzed enantioselective esterifications using different microemulsion-based gels

Chiral esters with high optical purity have been synthesized at 298.2 K from racemic 2-octanol and alkanoic acids using the commerical lipases fromChromobacterium viscosum (CV) orCandida sp. (SP 525) immobilized in microemulsion-based gelatin gels. The microemulsions consisted of water and alkanes stabilized by the anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT) and the naturally occurring zwitterionic surfactant soybean lecithin, respectively. The enzymes were solubilized both in water-in-oil (W/O) microemulsions and in microemulsions with a bicontinuous structure. Different microstructures of the gels were chosen since the enzyme may undergo conformational changes in different environments resulting in different catalytic efficiencies toward competing substrates. Therefore, it is of great fundamental interest to know the phase behaviour and the microstructures of the used microemulsion systems. Phase diagrams were determined at 298.2 K for the systems water-hexane-AOT and ethanol/water (11)-hexadecane-soybean lecithin. The former system exhibited a large one-phase W/O microemulsion region, while in the latter a small one-phase region with bicontinuous structure was present. The kinetic enantiomeric ratios (E-values), as determined from enantiomeric excess (e.e.) values at a conversion below 0.5, were higher both in the W/O microemulsion as well as in the bicontinuous microemulsion using the SP 525 lipase, than using the CV lipase. On the other hand, the conversions were higher using gels based on W/O microemulsions (AOT stabilized) than using gels based on microemulsions with a bicontinuous structure (lecithin stabilized).     

Green Synthesis of Gold,Iron and Selenium Nanoparticles Using Phytoconstituents: Preliminary Evaluation of Antioxidant and Biocompatibility Potential

This study aimed at fabricating gold (Au), iron (Fe) and selenium (Se) nanoparticles (NPs) using various natural plant extracts from the Fertile Crescent area and evaluating their potential application as antioxidant and biocompatible agents to be used in the pharmaceutical field, especially in drug delivery. The Au-NPs were synthesized using Ephedra alata and Pistacia lentiscus extracts, whereas the Fe-NPs and Se-NPs were synthesized using peel, fruit and seed extracts of Punica granatum. The phytofabricated NPs were characterized by the UV-visible spectroscopy, scanning electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction (XRD) and energy-dispersive X-ray (EDS) spectroscopy. Scanning electron microscope technique showed that the synthesized NPs surface was spherical, and the particle size analysis confirmed a particle size of 50 nm. The crystalline nature of the NPs was confirmed by the XRD analysis. All synthesized NPs were found to be biocompatible in the fibroblast and human erythroleukemic cell lines. Se-NPs showed a dose-dependent antitumor activity as evidenced from the experimental results with breast cancer (MCF-7) cells. A dose-dependent, free-radical scavenging effect of the Au-NPs and Se-NPs was observed in the DPPH (2,2-Diphenyl-1-picrylhydrazyl) assay, with the highest effect recorded for Au-NPs.     

SEC Characterization of Au Nanoparticles Prepared through Seed-Assisted Synthesis

In this paper we report the use of size-exclusion chromatography (SEC) for rapid determination of the sizes and size distributions of Au nanoparticles (NPs) prepared by seed-assisted synthesis. Analytical separation of Au NPs was performed in a polymer-based column of pore size 400 nm. We characterized the sizes and size distributions of the Au NPs by using 10 mM sodium dodecyl sulfate (SDS) as mobile phase and obtained a linear relationship (R ² = 0.986) between retention time and size of Au NPs within the range 9.8–79.1 nm; the relative standard deviations of these retention times were less than 0.3%. These separation conditions were used to characterize the sizes and size distributions of Au NPs prepared by seed-assisted synthesis. In addition to observing the elution times of the Au NPs we also simultaneously characterized their size-dependent optical properties by spectral measurement of the eluting peaks by use of an on-line diode-array detector (DAD), i.e., monitoring of the stability of the Au NP products. By using this approach we found the presence of SDS was beneficial in stabilizing the synthesized Au NPs. We also found that the volume of Au metal ions used affected the sizes of the final products. SEC seems an efficient tool for characterizing the sizes of NPs fabricated by seed-assisted synthesis.     

Facile one-pot synthesis of gold nanoparticles and their sensing protocol

This communication reports facile one pot synthesis of amoxicillin and sodium salt of amoxicillin stabilized gold nanoparticles (Au-NPs). Primarily the cyclic thioether linkage i.e. the thiozolidine ring of amoxicillin is utilized for sequestering Au(III). Fluorescence quenching of these clusters makes it an efficient protocol for sensing Cu(2+) at nano scale levels.     

Rapid one-pot fabrication of magnetic calcium phosphate nanoparticles immobilizing DNA and iron oxide nanocrystals using injection solutions for magnetofection and magnetic targeting

This is the first report on rapid (5–30 min) one-pot fabrication of magnetic calcium phosphate (CaP) nanoparticles (NPs) co-immobilizing DNA and iron oxide (IO) nanocrystals with high immobilization efficiencies (DNA (～90%) and IO (～70%)). NPs were fabricated via coprecipitation under clean bench in supersaturated CaP solutions using DNA, IO-based MRI contrast agent, and infusion quality source solutions (even the water used was of injectable quality) that ensured high safety level of the fabrication process and product. Prepared DNA-IO-CaP NPs exhibited strong magnetic property allowing their noncontact manipulation by external magnet. These NPs were smaller than 500 nm, had relatively large negative zeta potential showing stable dispersion without any additional surfactant, and exhibited no significant cytotoxicity under the tested transfection conditions. The IO content of these NPs was significantly varied and by adjusting the initial IO concentration, DNA-IO-CaP NPs with gene delivery capability to CHO-K1 cells as high as that of the IO-free DNA-CaP NPs without external magnetic field were prepared. Fabricated DNA-IO-CaP NPs showed significantly improved gene delivery capability under external magnetic field compared to the IO-free DNA-CaP NPs. Thus, the present coprecipitation process can be considered as a novel technique to fabricate multifunctional CaP-based NPs to achieve magnetofection and targeted delivery.     

Micropatterns constructed from Au nanoparticles

Covalently linked Au-NPs micropatterns have been successfully fabricated from the self-assembly film composed of 4-mercaptophenol-capped Au nanoparticles (Au-NPs) and -N2+ containing polymers of nitro-diazoresin (NDR) by selective exposure to UV light and development in sodium dodecyl sulfate (SDS) aqueous solution. The resultant well-defined micropatterns were characterized with AFM and XPS.     

On the stabilization of gold nanoparticles over silica-based magnetic supports modified with organosilanes

The immobilization of gold nanoparticles (Au NPs) on silica is made possible by the functionalization of the silica surfaces with organosilanes. Au NPs could only be stabilized and firmly attached to silica-support surfaces that were previously modified with amino groups. Au NPs could not be stabilized on bare silica surfaces and most of the NPs were then found in the solution. The metal-support interactions before and after the Au NP formation, observed by X-ray absorption fine structure spectroscopy (XAFS), indicate a stronger interaction of gold(III) ions with amino-modified silica surfaces than with the silanol groups in bare silica. An amino-modified, silica-based, magnetic support was used to prepare an active Au NP catalyst for the chemoselective oxidation of alcohols, a reaction of great interest for the fine chemical industry.     

Using ionic liquids to formulate microemulsions: Current state of affairs

Microemulsions are stable mixtures of a polar solvent, surfactant and an unpolar solvent. Ionic liquids (ILs, i.e. salts with melting points below 100 °C) are a huge class of potentially promising solvents. We discuss here published structural or thermodynamic investigations concerning microemulsions in which one or more of the three classical components are ILs.In microemulsions IL can replace respectively the “oil”, the “surfactant” and the “water” phase. Experimental proofs of the existence and stability of microemulsions are given as well as hints at their microstructure. While the four regimes initially defined by Winsor are all accessible, most of the examples of microemulsions containing ionic liquids belong to the class of “rigid” microemulsions. Since additional solutes have characteristic distribution coefficients for each pseudo phase, IL based microemulsions may provide a useful tool for solubilization (reaction medium) and separation, thus allowing the recovery of a large variety of reaction products, but also waste. Further to a discussion of phase diagrams and thermodynamics, we will show some application examples and propose challenges for future studies, in this vast but only emerging domain.     

Monitoring the Synthesis of Au Nanoparticles Using SEC

In this paper, it is demonstrated that size-exclusion chromatography (SEC) with SDS (10 mM) as the mobile phase can be used to rapidly determine the sizes of Au nanoparticles (NPs). It was found that standard particles at sizes ranging from 12.1 to 79.1 nm eluted in a linear manner with respect to the elution time. The reproducibility of the separation over the entire range of the calibration curve was high; the relative standard deviations of the elution times were less than 0.3%. Next, the separation conditions to characterize the sizes of Au NPs prepared through seed-assisted synthesis were employed. Using this approach, it was found that the rate of addition of the reducing agent influenced the sizes of the final products; for example, rapid addition of the reducing agent resulted in polydisperse Au NP products. SEC analysis revealed that the presence of NaOH in the synthesis medium decreased the sizes of the Au NPs dramatically. When using SEC to analyze Au NPs produced through seed-assisted synthesis, a good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy (TEM). Based on these findings, SEC appears to be an efficient and accurate tool for characterizing the sizes of NPs fabricated through seed-assisted synthesis.     

Microemulstion synthesis of powders of water-soluble energy-saturated salts

The feasibility of preparing energy-saturated salts (NH₄NO₃, KNO₃, and NaBH₄) in powders with various particle sizes in microemulsion systems based on oxyethylated surfactant Tergitol NP-4 has been demonstrated. Powders were isolated by destroying microemulsions with acetone. The regions of micellar synthesis have been determined depending on the solubilization capacities and concentrations of the reagents and salts at a fixed Tergitol NP-4 concentration (0.25 mol/L). The morphologies and particle sizes of the thus-prepared salt powders were characterized by scanning electron microscopy (SEM), X-ray powder diffraction, differential scanning calorimetry (DSC), differential thermal analysis (DTA), and thermogravimetry; the hydrodynamic radii of microemulsions were characterized by photon-correlation spectroscopy.     

Spectrophotometric and physicochemical investigations of Congo,alizarin red dyes and BSA interactions with Au,Ag and Au/Ag mix nanoparticles,and their antimicrobial activities

Individual and mix metal nanoparticles of Ag and Au have been prepared by the reducing method where citrate was used as reducing/stabilizing agent. The prepared NPs were characterized with UV/Visible and transmission electron microscopic (TEM) tools. The characteristic peak in UV/Visible at 525, 444 and 531 nm for Au, Ag and Ag/Au mix NPs respectively, gave primary confirmation of prepared NPs. TEM analysis showed the size of nanoparticles as 44.04, 19.78 and 30.93 nm for Ag, Au and Ag/Au mix NPs respectively. Congo and alizarin red dye interactions studies have been performed with prepared NPs to see the removal of the pollutants from water. Congo dye has shown weaker interaction as compared to alizarin due to structural symmetry. Amongst all, the AgNPs have shown maximum 67% and 75% interactions with Congo red and alizarin respectively due to high negative charges on the surface. The Au, Ag and Au/Ag mix NPs have shown stronger interaction with bovine serum albumin (BSA) protein up to 51, 59, 55% respectively, estimated through UV/Vis and physicochemical analysis. The biological evaluations of the prepared NPs have shown their antibacterial activity against Gram + ve and –ve species showing up to 9 cm zone of inhibition. The BSA interaction and antibacterial activity of NPs reveal the importance of NPs in medicinal field.