Study of adsorption of methylene blue and new methylene blue in liquid-solid interface by slab optical waveguide spectroscopy

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid–solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. Effect of pH on adsorption on MB and NMB was investigated. Binding rate constant analysis showed that both MB and NMB on bare SOWG demonstrates larger association constants than those on ODS-SOWG. Interactions of MB and NMB on bare SOWG and ODS-SOWG were analyzed by molecular mechanics calculation method. The binding energy change was in the following order: E_NMB–bare > E_MB–bare > E_NMB–ODS > E_MB–ODS.     

Simultaneous determination of methylene blue and new methylene blue by slab optical waveguide spectroscopy and artificial neural networks

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid-solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. The simultaneous determinations of both MB and NMB were explored by flow injection SOWG spectrophotometric analysis and artificial neural networks (ANNs) for the first time. Concentrations of MB and NMB were estimated simultaneously with the ANNs. Results obtained with SOWG were compared with those got by conventional UV-visible spectrophotometry.     

The role of diphenyl iodonium salt (DPI) in three‐component photoinitiator systems containing methylene blue (MB) and an electron donor

Three‐component initiators generally include a light‐absorbing photosensitizer, an electron donor that is often an amine, and the third component, which is usually an iodonium salt. To characterize the role of diphenyl iodonium chloride (DPI) in three‐component photoinitiator systems containing methylene blue (MB) as the photosensitizer, a systematic series of electron donors was used. The Rhem–Weller equation was used to verify the thermodynamic feasibility for photo‐induced electron transfer from the electron donors to the MB. Comparison of the photopolymerization rates of each two‐component initiator system (containing the photosensitizer and amine) to those of the corresponding three‐component system (with the addition of (DPI) allowed fundamental information regarding the role of the DPI to be obtained. It was concluded that the DPI enhances the photopolymerization kinetics in two ways: (1) it consumes an inactive MB neutral radical and produces an active phenyl radical, thereby regenerating the original methylene blue, and (2) it reduces the recombination reaction of the MB neutral radical and amine radical/cation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5863–5871, 2004     

亚甲蓝在分子有序组合体中的聚集行为

研究了生物染色剂亚甲蓝(MB)在分子有序组合体(胶束、O/W微乳液和层状液晶)介质中的聚集行为。根据MB特征峰处的吸收光谱值,计算了MB的二聚平衡常数和相应单体、二聚体的摩尔消光系数。并用稳态荧光法和无外加探针的循环伏安法进一步论证了计算结果。研究发现,当MB总浓度一定时,在胶束体系中MB单体量较少,在层状液晶体系中单体量较多,在O/W微乳液体系中则介于胶束和层状液晶之间。表明层状液晶体系是获取更多MB单体的理想介质。     

Nucleation and Growth Mechanism of Electropolymerization of Methylene Blue: The Effect of Preparation Potential on Poly(methylene blue) Structure

Nucleation and growth mechanism of electropolymerization of methylene blue (MB) in a basic medium and the effect of preparation potential on poly(MB) film structure were investigated by using cyclic voltammetry, potentiostatic current‐time transient, scanning tunneling microscopy (STM), atomic force microscopy (AFM), and UV‐vis. absorption spectroscopy techniques. Electropolymerization of MB has been achieved by potentiodynamic (cyclic voltammetry) and potentiostatic (constant potential) techniques. The potentiostatic current‐time transients fitted with a theoretical model and morphological studies indicate that nucleation and growth mechanism of poly(MB) starts with a progressive layer‐by‐layer nucleation and growth besides random adsorption. Nucleation and growth of poly(MB) follows a process between progressive layer‐by‐layer and 3‐D instantaneous mechanism resulting in highly‐oriented poly(MB) nanofibers with increasing poly(MB) film thickness. Cyclic voltammetry and morphological studies exhibit that poly(MB) film structure changes depending on the preparation potential. Poly(MB) films prepared at the potential values of 900 and 950 mV show a well‐ordered, smooth surface but at the potential values higher than 1000 mV, rough polymer surface arises as overoxidation takes place. UV‐vis. absorption spectra of poly(MB) film and MB monomer show three peaks. The peak at 410 nm for poly(MB) shows 100 nm blue shift when compared to the MB monomer and is attributed to poly(MB) formation on the electrode.     

Intercalation of methylene blue into barium phosphate—synthesis and electrochemical investigation

Methylene blue (MB) was strongly retained inside the cavity of host layered barium phosphate, without leaching, and the intercalated compound was characterized through X-ray power diffraction (XRD), IR spectra and electrochemical measurements. The intercalated dye compound was incorporated into a carbon paste electrode and, by means of cyclic voltammetry and amperometry, its electrochemical properties were investigated. In various electrolyte solutions, changing the pH between 3 and 9, the midpoint potential remained practically constant at −0.15 V. This is not the usual behavior for MB, since it is known that in the solution phase the midpoint potential changes considerably with pH. These data suggest that methylene blue behaves as a guest molecule in the lamellar structure of the barium phosphate. The electrode formed by this host/guest composition was used to investigate NADH electrochemical oxidation.     

Determination of methylene blue by resonance light scattering method using silica nanoparticles as probe

A simple and novel method was developed to determine methylene blue(MB) by resonance light scattering(RLS) using silica nanoparticles(SiO_2NPs) as the probe.It was found that MB could enhance the RLS intensity of SiO_2NPs.Moreover,the increase in RLS intensity was linear with the concentration of MB over the range of 0.01-3.0 μg mL~(-1).The limit of detection(LOD) was as low as 4.36 ng mL~(-1)(3σ) and the relative standard deviation(RSD) was 2.4%(n=6).Under the optimum experimental conditions,this proposed method was successfully applied for the determination of MB in aquaculture samples with recoveries between 96.3% and 107%.Possible mechanisms for the RLS enhancement of SiO_2NPs in the presence of MB were also discussed.     

Removal of methylene blue by tea wastages from the synthesis waste waters

The tea wastages could remove methylene blue（MB） as a cationic dye from waste water corresponding to second-order kinetic model.Thermodynamic studies showed that adsorption equilibrium constant（K_L） and maximum adsorption capacities(Q_max) were increased with increasing temperature.The removal efficiency of MB for Co 0.01 mmol/L at optimum conditions was about 85%. The maximum uptake capacity(Q_max) of methylene blue in a batch reactor was 0.328,0.542 and 0.659 mmol/g at 15,25 and 40℃, respectively.The enthalpy change（ΔH） and entropy change（ΔS） were 11.356 kJ/mol and 20.563 J/（mol K）,respectively.     

Unprecedented stable aqueous semiquinone methide radical formation interferes with adsorptive cathodic stripping voltammetry of cobalt methyl thymol blue

A putatively highly sensitive and selective method for the determination of cobalt in aqueous samples by catalytic adsorptive cathodic stripping voltammetry using methyl thymol blue (MTB) as the ligand has been documented [A. Safavi, E. Shams, Talanta 51 (2000) 1117] and its underlying mechanism has been briefly explored [A. Safavi, E. Shams, Electroanalysis 14 (2002) 708]. In an attempt to adapt the method for application in metalloprotein analysis we obtained erratic results, which were traced down to the redox non-innocence of the free ligand in the potential range prescribed for the metal analysis. On the hanging mercury drop electrode free methyl thymol blue is reversibly one-electron reduced to the semiquinone form with E_m,7.0 = −482 mV versus NHE at 22 °C, and the radical is subsequently quasi-reversibly one-electron reduced to the quinol form with E_m,7 ≈ −0.9 V. This observation invalidates the use of MTB in electrochemical analysis of metal ions. This is also the first observation ever of a stable quinone methide radical in aqueous solution.     

Increased cytotoxicity and phototoxicity in the methylene blue series via chromophore methylation

The cytotoxic and photodynamic activities of the commercially-available biological stains methylene blue (MB), 1,9-dimethyl MB (Taylor's Blue) and a newly synthesised compound, 1-methyl MB, were measured against the murine mammary tumour cell line, EMT-6 Both 1-methyl MB and 1,9-dimethyl MB exhibited increased dark toxicity with concomitant higher phototoxicity compared to MB at a light dose of 7.2 J cm⁻². While increasing the light dose as a function of the fluence rate increased the photocytotoxicity of MB, this had little effect on the methylated derivatives. In vitro chemical testing proved that successive methylation rendered the phenothiazinium chromophore both more resistant to reduction to its inactive leuco form, and also led to increased levels of singlet-oxygen production, thus providing a possible explanation for the increased toxicities of the methylated derivatives. Comparisons are made with the benzo[a]phenothiazinium photosensitizer, EtNBS.     

Dynamic analysis of aggregation of methylene blue with polarized optical waveguide spectroscopy

Polarized optical waveguide (POW) spectroscopy permits analysis of the changing molecular state of methylene blue (MB), including aggregate order and orientation at the waveguide surface. Monomer or dimer, dissolved randomly in MB aqueous solution, tends to aggregate at the waveguide surface during air drying. Furthermore, POW spectroscopy dynamically revealed that MB molecules became oriented vertically to the waveguide surface with increasing aggregation order.     

Comparative adsorption of methylene blue by magnetic baker’s yeast and EDTAD-modified magnetic baker’s yeast: Equilibrium and kinetic study

Magnetic baker’s yeast (MB) was prepared using glutaraldehyde cross-linking method and chemical modification with ethylenediaminetetraacetic dianhydride (EDTAD). The fabricated EDTAD-modified magnetic baker’s yeast (EMB) was then employed to remove methylene blue. Comparative adsorption of methylene blue by EMB and MB was systematically investigated with respect to pH, contact time, initial concentration and reaction temperature. The mechanism of methylene blue adsorption by EMB and MB was investigated by SEM, FTIR and Special surface area using methylene blue method. The results revealed that Fe₃O₄ nanoparticles were steadily cross-linked/incorporated with baker’s yeast biomass and the EDTA was modified on the surface of the magnetic baker’s yeast. The equilibrium adsorption data were fitted better by Langmuir isotherm, and the specific surface areas were 42.953–226.07 m²/g for MB and 94.972–499.85 m²/g for EMB, respectively. Kinetic studies suggested that the pseudo-second-order model was suitable to describe the adsorption process. Thermodynamic studies indicated that the adsorption was feasible, spontaneous and endothermic. The recovery efficiencies were above 80% by using 0.1 M HCl.     

Enthalpies of adsorption of methylene blue and crystal violet to montmorillonite

Calorimetric measurements of the enthalpy of adsorption on montmorillonite indicate different patterns for methylene blue (MB) and crystal violet (CV). The enthalpy of adsorption of MB is endothermic up to 73% of the cation exchange capacity (CEC) (i.e., about 0.6 mmol g^-1 clay), whereas at higher adsorption ratios the adsorption reaction becomes exothermic. The enthalpy of adsorption of CV is exothermic for all amounts adsorbed. These results were confirmed with adsorption experiments that prove that adsorption of MB increase with temperature, whereas CV adsorption decreases. This behavior indicates changes in the equilibrium coefficient according to Van't Hoff's equation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical determination of heparin using methylene blue probe and study on competition of Ba with methylene blue for binding heparin

Cyclic voltammetric investigation of the interaction of methylene blue (MB) with heparin (hep) at a gold electrode is presented. The combination of MB with heparin formed a nonelectroactive complex MB-hep, which resulted in the peak current decrease of MB. The anodic peak current difference of MB was found to be proportional to the concentration of heparin in the range of 0.666-64.5 μg mL⁻¹ with a detection limit of 270 ng mL⁻¹ and a satisfactory result was obtained for the determination of heparin in injection samples. The equilibrium constant for MB-hep complex was calculated to be 7.32 × 10⁵. The dynamic process of competition of Ba²⁺ with methylene blue for binding heparin was monitored using quartz crystal microbalance (QCM) technique. The reaction rate constant between Ba²⁺ and MB-hep was estimated to be 0.0022 s⁻¹.     

Synthesis of NiO coated chitosan-cenosphere buoyant composite for enhanced adsorptive removal of methylene blue

The objective of the present study is to utilize fly ash cenosphere to remove methylene blue (MB) from the water streams. Nickel oxide is a typical semiconductor used as proficient adsorbent material for degradation of dye with environment friendly applications due to its excellent chemical stability and high catalytic activity. The chitosan cenosphere buoyant composite coated with NiO was synthesized with hydrothermal grafting reaction using silane coupling agent and epichlorohydrin as a cross-linking reagent. The batch adsorption experiments were carried out with a cationic dye, methylene blue as a representative organic pollutant to investigate the adsorptive capabilities of the composite as adsorbent. The influence of pH (2-12), initial concentration of dye (50–200 mg/L), temperature (37–47 °C) and contact time (0–24 h) were taken as parameters in the study. On the relative elimination of MB, the effect of time and temperature were investigated. The adsorption kinetics for MB was correlated and found to observe the pseudo-second order kinetic model, whereas the equilibrium adsorption isotherm follows the Langmuir model (R² > 0.99). The results indicate that the floating fly ash cenosphere coated with NiO proved to be more responsive for enhanced degradation of methylene blue.     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Removal of methylene blue by seed-watermelon pulp-based low-cost adsorbent: Study of adsorption isotherms and kinetic models

Based on the abundance of seed-watermelon pulp (SWP) in Xinjiang, China, SWP was employed to prepare low-cost adsorbent toward the removal of methylene blue (MB). The effects of contact time at different initial concentration were studied. The widely used adsorption isotherm models including Langmuir, Freundlich, and Temkin isotherms were employed to depict the adsorption process. The Langmuir isotherm was best fitted to the experimental data. Batch kinetic studies showed that an equilibrium time of 300 minutes was needed for the adsorption. The adsorption properties can be well described by pseudo-second-order kinetic model and the MB uptake was not controlled by intraparticle diffusion mechanism.     

Free‐standing Graphene/Poly(methylene blue)/AgNPs Composite Paper for Electrochemical Sensing of NADH

Highly flexible graphene/poly(methylene blue)/AgNPs composite paper was successfully prepared for amperometric biosensing of NADH. For this purpose, a dispersion including graphene oxide (GO), methylene blue (MB) and silver nanoparticles (AgNPs) was prepared and GO/MB/AgNPs paper was acquired by vacuum‐filtration of this dispersion through a suitable membrane. After peeling it off from membrane, it was transformed to rGO/MB/AgNPs paper by performing reduction with hydriodic acid. In a three‐electrode cell, which is containing 0.1 M phosphate buffer solution (pH: 9.0), rGO/MB/AgNPs paper was used as working electrode and rGO/poly(MB)/AgNPs composite paper was generated by surface‐confined electropolymerization of MB using successive cyclic voltammetry approach in a suitable potential window. Characterization of this composite paper was carried out by using scanning electron microscopy, scanning tunneling microscopy, X‐ray photoelectron spectroscopy, powder X‐ray diffraction spectroscopy, Raman spectroscopy, four‐point probe conductivity measurement and cyclic voltammetry techniques. Flexible rGO/poly(MB)/AgNPs composite paper has demonstrated high sensitivity, wide linear range and low detection limit for amperometric quantification of NADH.     

Decontamination of methylene blue from aqueous media using alginate-bonded polyacrylamide/carbon black nanocomposite hydrogel

This work synthesized the novel alginate (Alg) based nanocomposite hydrogel using the free radical polymerization method to remove methylene blue (MB) from the aqueous solution. The successful grafting of acrylamide (AAm) monomer onto the alginate backbone was confirmed by the FTIR test. Different carbon black (CB) nanoparticle levels (0–12.5 wt.%) were embedded in a hydrogel matrix to enhance the removal efficiency, and its optimum value was obtained at 7.5 wt.%. FTIR, TGA, BET, and SEM analyses were performed to characterize synthesized adsorbents. TGA results showed that Alg-g-poly(AAm)/CB nanocomposite hydrogel has a higher thermal stability than Alg-g-poly(AAm) hydrogel. SEM analysis showed that incorporating CB into Alg-g-poly(AAm) considerably enhances roughness and surface area. Also, a higher surface area of Alg-g-poly(AAm)/CB (2.5 m²/g) was confirmed by BET analysis. The removal efficiency of nanocomposite hydrogel at optimum conditions of pH 6, initial concentration 10 mg/L, temperature 25 °C, and contact time 60 min was calculated at 94.63%. The kinetic and isotherm data were best fitted to pseudo-second-order and Langmuir models. The monolayer adsorption capacity for Alg-g-poly(AAm) and Alg-g-poly(AAm)/CB were calculated at 22.77 and 24.56 mg/g, respectively, showing CB's effectiveness in improving MB adsorption. The thermodynamic study showed that the removal process of MB by both adsorbents is spontaneous and exothermic, and entropy decreases. The synthesized adsorbents showed a good performance in textile wastewater treatment. Finally, it can be concluded that the synthesized adsorbents can be successfully applied for wastewater treatment application.     

DNA detection based on Mn-doped ZnS quantum dots/methylene blue nanohybrids

Nanohybrids were formed from 3-mercaptopropionic acid(MPA)-coated Mn-doped ZnS quantum dots(QDs) and methylene blue(MB) via electrostatic interaction, and then used in the detection of trace DNA.The principle of detection is as follows: MB binds with Mn-doped ZnS QDs via electrostatic interaction,and then quenches the room temperature phosphorescence(RTP) of the QDs through photoinduced electron-transfer(PIET). After the addition of DNA, MB binds with DNA through intercalation and electrostatic interaction, and desorbs from the surfaces of Mn-doped ZnS QDs, which recovers the RTP of the QDs. On this basis, a DNA detection method based on the properties of RTP was set up. This method shows a detection range of 0.2–20 mg/L, and a detection limit of 0.113 mg/L. Since this method is based on the RTP of QDs, it is not interfered by the background fluorescence or scattering light in vivo, and thus,avoids complex sample pretreatment. Thus, this method is very feasible for detection of trace DNA in biofluids.