Salicylhydroxamic acid as an analytical reagent

Summary Salicylhydroxamic acid has been used as a colorimetric reagent for the estimation of uranium, vanadium, molybdenum and iron. It permits the direct estimation of vanadium in presence of molybdenum and uranium, though iron interferes, while the estimation of uranium or molybdenum is not possible in presence of each other or of vanadium. The vanadium complex can be removed from solution by extraction with ethyl acetate and estimated colorimetrically between p_H 0.8 to 3.5. This permits its determination in steels after removal of iron. Sensitivity: U 0.1 g, V 0.017 g, Mo 0.015 g, Fe 0.0125 g.     

Untersuchungen zur mikroanalytischen Bestimmung der langkettigen Fetts?uren im Blut

Zusammenfassung Für die im Plasma an Albumin gebundenen sog. freien Fettsäuren (FFS) wird ein neues gas-chromatographisches Analysenverfahren vorgestellt. Das Probenvolumen beträgt 50 l Serum oder Plasma. Die Extraktion erfolgt in 1,1 ml CHCl₃/CH₃OH (21, v/v) mit n-Heptadecansäure als innerem Standard (0,05 Val C₁₇₀/ml). Nach Eindampfen am Rotationsverdampfer werden die FFS im verschlossenen Reaktionskölbchen mit 20 l CH₃J/Essigsäureäthylester (11, v/v) über festem K₂CO₃ bei 90°C 1 h verestert. Die Varianz des Verfahrens errechnet sich bei 15 Parallelbestimmungen zu 4,85%.Vortrag anläßlich der Tagung Spurenanalyse, 2. bis 5. April 1973 in Erlangen.     

On theC p toC v conversion of solid linear macromolecules II

A modification is proposed for the Nernst-Lindemann equation that is used to convert calculated heat capacities at constant pressure (C _p ) to heat capacities at constant volume (C _v ) for solid, linear macromolecules. the constant A₀ per mole of repeating unit in this equation is derived by taking into account the variable number of vibrators excited at different temperatures. With the new equation it is possible to calculateC _p for solid polymers over a wider temperature range. The constant is calculated for solid polymers from experimental thermal expansivity, isothermal compressibility and heat capacity data obtained from the literature. An average value of (3.9±2.4)×10^–3(K mol)/J was obtained for A₀ (new) from data on 22 solid polymers. This average value may be used as a universal constant in case no experimental data on compressibility and expansivity are available for computation ofA ₀. The remaining variation of A₀ (new) with temperature is discussed and example calculations are shown for polyethylene. Effects of premelting and possibly large-amplitude motion are discovered for polyethylene in the temperature range 290 to 410 K.

---

Zusammenfassung Es wurde eine Abänderung der Nernst-Lindemann Gleichung vorgeschlagen, mit deren Hilfe für feste, lineare Makromoleküle errechnete Wärmekapazitäten bei konstantem Druck (C _p ) in Wärmekapazitäten bei konstantem Volumen (C _p ) umgerechnet werden können. Zur Ableitung der molaren Konstanten A₀ in dem sich wiederholenden Teil der Gleichung wurde die variable Anzahl der erregten Schwinger bei verschiedenen Temperaturen berücksichtigt. Mit der neuen Gleichung wird es möglich, dieC _p fester Polymere für einen breiten Temperaturbereich zu errechnen. Die Konstante wurde für die festen Polymere auf Grund des ermittelten thermischen Ausdehnungsvermögens und der isothermen Kompressibilität sowie der der Literatur entnommenen Wärmekapazitätsangaben berechnet. Aus Angaben von 22 festen Polymeren wurde für A₀(neu) ein Durchschnittswert von (3,9±2,4)×10^–3 (K mol)/J erhalten. Verfügt man zur Berechnung von A₀ über keine experimentellen Werte für Kompressibilität und Ausdehnungsvermögen, so kann dieser durchscnittswert als universale Konstante angewendet werden. Die verbleibende Temperaturabhängigkeit von A₀(neu) wird besprochen und Beispielrechnungen für Polyäthylen gegeben. Für Polyäthylen wurden im Temperaturbereich 290 bis 410 K Effekte durch Vorschmelzen und Bewegungen mit großer Amplitude festgestellt.

---

-, (C _p ) (C _v ) , . A ₀ , . C _p . A ₀ , , . 22 , A ₀ () (3,9±2,4)· 10^–3 ·/. A ₀ . A ₀ , . 290–410 .

     

CO/H2 and CO2/H2 reactions with amorphous carbon-metal catalysts

By metal impregnation of selected naturally occurring organic materials followed by controlled carbonization, metal semicoke catalysts can be readily prepared. These catalysts have been tested in the synthesis of hydrocarbons and alcohols from CO/H₂ and CO₂/H₂ mixtures. Fe and Co preparations have been used. Relatively high temperatures are required when using these catalysts, which are quite active for synthesis using CO₂ and H₂. The pressure (5150 kPa) is very favorable both for the synthesis of liquid hydrocarbons (C₅–C₃₀) and alcohols (C₁–C₅).

---

. CO/H₂ CO₂/H₂. Fe Co. , CO₂ H₂. 5150 ) (C₅–C₃₀) (C₁–C₅).

     

Chemical oscillations in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols

Chemical oscillatory behavior in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols is reported. The reaction is strongly inhibited by stirring. Effect of one-electron redox couples (EZ catalysts) on the system is described.

---

. . - ( EZ) .

     

Flow-injection spectrophotometric determination of molybdenum and vanadium with carminic acid in the presence of cetyltrimethylammonium bromide

The color-forming reactions of molybdenum(VI) and vanadium(IV) with carminic acid (CA) in the presence of cetyltrimethylammonium bromide (CTAB) were used in the flow-injection determination of these metals. The micellar medium enhances the spectrophotometric features of the Mo(VI)-CA and V(IV)-CA binary complexes, and the higher solubility of these complexes when the CTAB concentration is above critical micelle concentration permits the easy application of flow-injection systems. Under the optimum conditions, linear calibration graphs were obtained from 0.76 to 28.8 g/ml for molybdenum and from 0.30 to 9.1 g/ml for vanadium. The detection limits were 0.33 and 0.16 g/ml for molybdenum and vanadium, respectively. The selectivity of the method was investigated and the procedure was successfully applied to the determination of molybdenum in steels and pharmaceuticals and of vanadium in petroleum products.     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.     

Hydrogenation of carbon monoxide catalysts prepared by pyrolysis of Co2(CO)8 on various oxide supports

Catalysts prepared by pyrolysis of Co₂(CO)₈ on oxide supports have been studied in the hydrogenation of CO. It is shown that MgO and -Al₂O₃-based catalysts are less active than those supported on SiO₂, TiO₂ and ZrO₂. The application of -Al₂O₃ as a support increases the relative yield of light hydrocarbons.

---

, Co₂(CO)₈ , CO. , MgO -Al₂O₃ SiO₂, TiO₂ ZrO₂. -Al₂O₃ .

     

Determination of traces of sodium alkylbenzenesulphonate by high-performance liquid chromatography. Application to water

Summary For the trace determination of sodium alkylbenzenesulphonate (ABS) by HPLC the following conditions were employed: Shimadzu ZORBAX SIL Column (5 m, 4.6 mm i.d. x 150 mm) as stationary phase, 0.2% ammoniaethanol (v/v) as mobile phase, UV detector at 225 nm, injection volume 12 l. The chromatograms of ABS were simple and sharp (detection limit of ABS 0.02 g in 12 l of ethanol). The calibration curves of ABS were linear in a concentration range of 0.03 0.3 g in 12 l of ethanol. In the case of linear sodium dodecylbenzenesulphonate positive errors of 1 4% were caused by non-ionic surfactants or laurylsulphate (6 times excess), 10 50% positive errors were caused by 2 6 times excess of household detergents.Standard water samples containing ABS were treated with a weak base anion-exchange resin, the adsorbed ABS were eluted, and then determined either by HPLC or by the methylene blue spectrophotometric method. Recoveries of ABS in water were about 92 107% by HPLC.

---

Bestimmung von Spuren Natriumalkylbenzolsulfonat mit Hilfe der HPLC. Anwendung auf Wasser

Zusammenfassung Für die Spurenbestimmung von Natriumalkylbenzolsulfonat (ABS) durch HPLC werden die folgenden Bedingungen empfohlen:Shimadzu ZORBAX SIL (5 m, 4,6 mm x 150 mm) als stationäre Phase, 0,2% Ammoniak/Ethanol als mobile Phase, UV-Detektor bei 225 nm, Injektionsvolumen 12 l. Die erhaltenen Chromatogramme sind einfach und scharf (Nachweisgrenze 0,02 g in 12 ml Ethanol). Die Eichkurven sind im Konzentrationsbereich von 0,03–0,3 g in 12 l Ethanol linear. Im Falle des linearen Natriumdodecylbenzolsulfonats werden bei Anwesenheit von nicht-ionischen oberflächenaktiven Substanzen oder von Laurylsulfat in 6fachem Überschuß positiver Fehler von 1–4% erhalten; bei 2–6fachem Überschuß von Haushaltswaschmitteln ergeben sich positive Fehler von 10–50%.Standard-Wasserproben werden zunächst einer Behandlung mit einem Anionenaustauscher unterzogen, die adsorbierten ABS eluiert und durch HPLC oder nach der Methylenblaumethode analysiert. Wiederfindungsraten liegen bei 92–107%.

     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Rapid determination of halogens in milk by instrumental neutron activation analysis

The absolute concentrations of iodine, bromine and chlorine in milk, have been determined by epithermal neutron activation followed by high resolution gamma-ray spectrometry. Two kinds of milk commonly consumed in Israel have been investigated. The concentration of iodine, bromine and chlorine were found to be 0.18–0.30 g/ml, 2.02–2.85 g/ml and 0.65 mg/ml, respectively. The method is fast, selective, accurate and highly sensitive.     

Kinetics of heterogeneous catalytic hydroformylation of propylene on rhodium-cobalt catalysts. Reaction mechanism

Steady-state kinetics of combined heterogeneous catalytic hydrogenation and hydroformylation of propylene on Rh–Co-containing catalysts has been studied at atmospheric pressure and T=140–170 °C. A reaction mechanism is suggested. The kinetic model adequately describes all observations.

---

- Rh–Co- 140–170 °C. . , .

     

Electrothermal AAS studies of Sm, Eu, Dy, and Er separated from uranium

Summary Studies were conducted on the assay of Sm, Eu, Dy and Er separated from uranium using aqueous standards by electrothermal AAS with Massmann type graphite furnace. The working curves were found to be linear in the ranges Sm (1–10 g/ml), Eu (0.05–0.6 g/ml), Dy (0.1–0.8 g/ml) and Er (0.1–1.0 g/ml). The values obtained for synthetic samples agreed favourably with those obtained by emission spectrographic method. Experiments using pyrolytic carbon coated tubes with and without pretreatment by La, Ta and Y have shown an enhancement with treatment upto a maximum of 15% and improve the memory effect marginally. The effect of Ta treatment was found to be singularly useful in improving the general behaviour of Sm. The interference effects of lanthanides, other than the analyte, were found to be negligible. However, the presence of uranium was found to affect the absorbance. The absorbance of Eu was found to be nearly independent of uranium after an initial increase. On the other hand, the absorbance of other elements studied was found to drastically decrease after an initial enhancement. Detailed investigations of temperature dependence of absorbance were carried out using Eu, Dy and Er. The differences in the behaviour of these elements is attributed to probable differences in the modes of their atomization.

---

Untersuchung von aus Uran abgetrenntem Samarium, Europium, Dysprosium und Erbium durch elektrothermische Atomabsorptions-Spektralphotometrie

Zusammenfassung Die Untersuchungen wurden mit Hilfe des Graphitrohrofens nach Maßmann durchgeführt. In folgenden Bereichen ergaben sich lineare Eichkurven: Sm 1–10 g/ml, Eu 0,05–0,6 g/ml, Dy 0,1–0,8 g/ml, Er 0,1-1,0 g/ml. Die aus synthetischen Proben erhaltenen Ergebnisse stimmten gut mit den durch Emissionsspektrographie erhaltenen überein. Versuche wurden mit Röhren mit pyrolytischen Kohlenstoffüberzug mit und ohne Vorbehandlung durch La, Ta und Y durchgeführt und ergaben eine bis 15%ige Steigerung durch die Behandlung sowie eine mäßige Besserung des Memoryeffektes. Eine Behandlung mit Ta war besonders für Sm vorteilhaft. Störungen durch andere Lanthanide waren vernachlässigbar. Uran beeinflußte jedoch die Absorption. Im Falle von Eu zeigte sich nach anfänglicher Zunahme fast eine Unabhängigkeit, während bei den anderen untersuchten Elementen nach anfänglicher Zunahme eine beträchtliche Abnahme auftrat. Mit Eu, Dy und Er wurde ebenfalls die Temperaturabhängigkeit der Absorption untersucht. Festgestellte Unterschiede im Verhalten werden auf unterschiedliche Atomisierung zurückgeführt.

     

Instrumental neutron activation analysis of carbon containing micro-spheres from Jungfrau-Joch glacier ice

From about 700 kg old, high altitude glacier ice (age 400 y) more than 170 glassy spherical objects with a mean diameter of 100 m were isolated. Neutron activation analysis of individual transparent objects (each 10^–6 g) showed the presence of K, Sc, Cr, Fe, La, Eu, Au, etc., in varying concentrations. A detection limit of 10^–14 g/g was achieved by means of an anticompton circuit. A systematic study by mass spectrometry of positive and negative ions using a LASER microprobe disclosed that the main constituents of some of these smooth glacier spheres consisted of elemental carbon. The chemical composition of some spherules admits the possibility of extraterrestrial origin, e.g. ablation material from meteorites with high carbon contents, which entered the earth's atmosphere.     

Chemical behaviour of helium muonide just after muon catalyzed fusion

Chemical behaviour of a helium muonide atom /He^o/ can be understood on the analogy of its hydrogen homologues, muonium /Mu/, deuterium /D^o/ and tritium /T^o/. In muon catalyzed fusion /CF/, a small fraction of negative muon in the fusion cycle sticks to helium to give proton-like He⁺ which easily picks up one electron forming He^o. The energy of He⁺ at birth is about 3.5 MeV being in a similar situation to the case of a hot tritium atom produced by /n, p/ or /n, / reaction. The reaction cross section and rate of He^o reactions are estimated.     

Qualitativer Nachweis von Magnesium mittels einiger einfacher Monoazofarbstoffe

Zusammenfassung Es wurden weitere Azofarbstoffe in bezug auf ihre Eignung zum Magnesiumnachweis untersucht. Man erreichte eine Identifizierungsgrenze von 0,1 g Mg und eine Grenze der Verdünnung von 1 1500000. Wahrscheinlich ist eine bestimmte Molekülstruktur für den Farbumschlag verantwortlich.     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Atomic-absorption spectrophotometric determination of ultramicro amounts of selenium(IV) and total selenium in sulphuric acid

Summary Ultramicro amounts of selenium in sulphuric acid are determined by a new atomic absorption spectrophotometric method. Selenium(IV) is directly determined ater extraction into toluene with an aromatic o-diamine and addition of nickel(II) prior to atomization; the determination of total selenium (0, IV and VI) needs a treatment of the sample with selected oxidizing and reducing agents.In the studied samples, total selenium (0.003–0.022 g of Se in 1 ml sulphuric acid) is present only in the tetravalent state. The detection limit of the method is 0.003 g of selenium.

---

Atomabsorptions-spektralphotometrische Bestimmung von Ultramikromengen Selen(IV) und Gesamtselen in Schwefelsäure

Zusammenfassung Selen(IV) kann direkt bestimmt werden nach Toluolextraktion der mit einem aromatischen o-Diamin behandelten Lösung und Zusatz von Nickel(II). Die Bestimmung von Gesamtselen (0, IV, VI) erfordert eine Vorbehandlung mit Perchlor- bzw. Salpetersäure und Wasserstoffperoxid. Die Nachweisgrenze des Verfahrens beträgt 0,003 g Se. In den untersuchten Proben war das Gesamtselen (0,003–0,022 g/ml) nur als Se(IV) vorhanden.