乙二醇对烷基三甲基溴化铵胶团化行为的影响

利用电导法研究了烷基三甲基溴化铵表面活性剂(CnTAB,n=12,14,16),即十二烷基三甲基溴化铵(DTAB),十四烷基三甲基溴化铵(TTAB)和十六烷基三甲基溴化铵(CTAB),在混合极性溶剂乙二醇/水(体积分数0～40%)中的胶团化行为。考察了温度对胶团形成的影响,应用相分离模型估算了三个表面活性剂的胶团热力学参数。结果表明临界胶团浓度(cmc)和反离子解离度(α)都随乙二醇组分的增加而增大。在乙二醇/水混合溶剂中胶团形成的标准吉布斯自由能相差很小,混合焓都是负值,而混合熵都为正值,说明焓-熵补偿效应在胶团形成中起主导作用。     

十二烷基硫酸钠对聚乙烯醇亚浓水溶液流变行为的影响

表面活性剂会影响聚乙烯醇(PVA)分子间及分子内氢键形成,进而改变其水溶液的流变响应.本文在确定十二烷基硫酸钠(SDS)在PVA亚浓水溶液中的临界聚集浓度(CAC)和临界胶束浓度(CMCP)基础上,考察了SDS对PVA亚浓溶液(10 wt%)流变行为的影响.研究发现,不同浓度SDScsur对PVA水溶液稳态流变行为的影响差异较大:(1)当csur CMCP,随着csur增加,胶束起物理交联点作用,ηa增大,复合溶液的动态储能模量亦显著增大.加入SDS后,PVA体系内结合水的数目降低,但当csur> CMC后,结合水的数目几乎不变,黏流活化能也表现出相近的变化规律.与稀溶液相比,SDS对PVA亚浓溶液的降黏幅度较大.     

十二烷基三甲基溴化铵在聚苯乙烯胶乳粒子上的吸附

实验测得C~1~2TAB在PS胶乳粒子表面的吸附等温线呈L型的二阶段吸附特征,这表明初始的C~1~2TA^+离子是将其季铵正电性头基吸引在PS链的负电性硫酸根端基上,并将碳氢链通过疏水相互作用吸附在PS链上。结合光子相关谱测得胶乳粒子流体力学半径R~H的变化,表明第I阶段围绕着这些初始吸附位的聚集吸附,产生平均聚集数为4.0的松散小聚集体,此时对应的浓度c/cmc=0.32是文献通常所指的临界表面胶团浓度csmc。其后的进一步聚集吸附最终生成了附着在PS链端基处且平均聚集数为19.5的球形吸附胶团。这一饱和吸附的结果增加了胶乳粒子在水溶液中的分散稳定性。     

顺丁橡胶分子结构参数对其浓溶液流变性质的影响

对顺丁橡胶浓溶液作了较为深入的研究,主要讨论了分子量分布和支化因子与顺丁橡胶浓溶液流动行为的关系。用倒沉淀分级的方法进行了大量分级,得到分子量分布较窄的试样;对这些试样用GPC-自动粘度计联用的方法测定了分子量、分子量分布和支化因子,同时用同轴圆筒式粘度计及落球方法测定了这些试样的浓溶液粘度。     

分子结构参数对顺丁胶浓溶液流变性质的影响

本工作用GPC-Automatic Viscometer方法测定了顺丁胶样的分子量、分子量分布和支化因子,用同轴圆筒粘度计及落球法测定了顺丁胶浓溶液的粘度,主要研究了分子量分布和长链支化对顺丁胶浓溶液非牛顿流动的影响。提出了描述不同分子量分布的顺丁胶浓溶液粘度的切变速率依赖性的简单公式,并讨论了长链支化对顺丁胶浓溶液非牛顿流动的影响。     

四甲基溴化铵及不同链长表面活性剂对甲基纤维素-邻甲氧基肉桂酸溶液凝胶化行为的影响

测定了四甲基溴化铵以及表面活性剂十二烷基三甲基溴化铵(DTAB)、十四烷基三甲基溴化铵(TTAB)和十六烷基三甲基溴化铵(CTAB)对甲基纤维素(MC)-4邻甲氧基肉桂酸钠盐(OMC-)体系的凝胶化行为的影响.结果表明:含DTAB、TTAB以及CTAB的MC-OMC溶液的溶胶-凝胶转变温度不随表面活性剂质量分数的变化而变化,但是向MC-OMC溶液中加入四甲基溴化铵,体系的溶胶-凝胶转变温度会显著下降.在含四甲基溴化铵或不同链长表面活性剂的MC-OMC-溶液中,TTAB等表面活性剂分子更倾向于在水溶液中形成球状胶束;四甲基溴化铵与OMC-有着较强的静电作用,会导致MC和OMC-形成的核-壳结构破裂.     

水溶性聚酯浓溶液的流变特性

研究了由对苯二甲酸二甲酯、间苯二甲酸、间苯二甲酸二甲酯 5 磺酸钠与乙二醇等共缩聚合成的PET型水溶性聚酯浓水溶液 (质量浓度 3 0 % )的流变特性 .研究表明 ,溶液的表观粘度随切变速率的变化规律呈现一定的切力增稠特征 ,流动指数范围为 1 0 4～ 1 2 0之间 ;其lgηa τ曲线呈线性 ,零切粘度值为 1 5 8～3 5 2cP ,随分子量、分子结构和温度而异 ,其中分子链中间苯二甲酸乙二醇酯 5 磺酸钠链节含量对溶液粘度影响较大 ;粘流活化能因分子结构和切变速率而变 ,其值范围为 1 2 0～ 2 3 9kJ/mol.     

二烯丙基甲基烷基溴化铵的结构与性质的关系

对4种二烯丙基甲基烷基(n=12,14,16,18)溴化铵(标记为C12,C14,C16,C18)的性质与性能进行了研究。 通过测定其热稳定性、表面活性和絮凝性能,考察产物结构对其性质与性能的影响规律。 结果表明,季铵盐C12~C18的主要分解温度分别为170~300 ℃、172~303 ℃、170~293 ℃和170~310 ℃,对应失重率分别为92.8%、92.6%、96.4%和87.4%;临界胶束浓度(cmc)和临界胶束浓度下的表面张力(γ_cmc)分别为5.2、3.5、1.4、1.1 mmol/L和26.6、25.2、33.8、35.8 mN/m,显示出较高的表面活性;季铵盐C16的发泡与稳泡性能最好,C12的Krafft点<0 ℃,C14、C16和C18的Krafft点分别为1、8和19 ℃; C12和C14分别对膨润土和高岭土的絮凝能力最强,表明单体的絮凝性能具有结构选择性。     

辛基三甲基溴化铵与辛基硫酸钠混合水溶液的相行为

对辛基三甲基溴化铵(OTAB)与辛基硫酸钠(SOS)正、负离子混合表面活性剂水溶液的相行为进行了研究.在高浓度的溶液中,混合表面活性剂形成液晶相,随着混合摩尔比OTAB/SOS接近于1,液晶结构由六角相转层状相,同时夹杂少量沉淀物;在中等浓度时,任意混合摩尔比例下皆为均相透明溶液;在低浓度下,在很宽的OTAB/SOS混合摩尔比的范围,出现双水相,其中的表面活性剂稀薄相,为不同大小的胶团与囊泡组成的稀溶液,另一表面活性剂富集相中则为数密度很大的囊泡聚集体,富集相对油溶性染料的增溶作用比非富集相高得多.     

高分子熔体和浓溶液流变性能的研究

基于多重缠结网络结构模型和高分子链上缠结点在流动中可进行动态解缠和再缠结的多重蠕动机理,用统计力学和动力学相结合的方法,分别计算出了缠结链组的末端距分布函数;处于缠结状态下高分子链构象统计分布函数;受力下聚合物熔体粘弹性形变自由能和解除外力下高分子挤出体可回复性粘弹性形变自由能,提出了高分子挤出体可回复形变的粘弹性分子理论。推导出的高分子熔体的回忆函数、简单剪切流下的本构方程和物料函数,并采用一种新的方法测定出物料的四种参数： η0、 GN0、 n′和 a。对于高分子挤出体,可回复性粘弹性形变由快速弹性形变和慢速粘弹性形变两者组成,当把两种形变量的复合结构参数－分子链的反式构象分数引入两种形变自由能表达式后,就从理论上得到了可回复形变量同挤出胀大比间的定量表达式,从而建立起一个具有分子链结构参数的新的挤出胀大比方程,可回复形变量同挤出条件（温度、挤出速率和量以及口模长径比不同的挤出机）和树脂结构特征（分子量及分布）的关系式以及在特殊情形下的简化表达式,并用几种高分子熔融体系的挤出胀大比和可回复性形变量的实验数据对理论进行验证,理论方程同实验数据较好的符合。     

Interaction Between 1-Dodecyl-3-Methylimidazolium Bromide and Sodium Carboxymethylcellulose in Aqueous Solution: Effect of Polymer Concentration

Effect of the concentration of water-soluble polyanion (sodium carboxymethylcellulose, NaCMC) on the interaction between a cationic surfactant (1-dodecyl-3-methylimidazolium bromide, C₁₂mimBr) and NaCMC in aqueous solution has been studied by isothermal titration microcalorimetry (ITC), conductivity, surface tension, and rheological measurements. From the surfactant/polymer interacting enthalpy, it can be deduced that the electrostatic attraction between the cationic surfactant and anionic polyelectrolyte causes an endothermic process, and the C₁₂mimBr monomers binding to the NaCMC chains to form micelle-like aggregates through hydrophobic interaction is an exothermic process. Increasing the NaCMC concentration causes the interaction between C₁₂mimBr and NaCMC to decrease, and the characteristic surfactant concentrations, including the critical aggregation surfactant concentration (CAC), the surfactant concentration to form free micelles (C_m), and the saturation concentration of surfactant on the NaCMC chains (C_S) to increase. Because of the strong electrostatic interaction between C₁₂mimBr and NaCMC, the formation of C₁₂mimBr/NaCMC complexes can lead to precipitation or redissolution depending on solution composition, so the critical precipitation concentration (C_P) and the onset of a redissolution concentration (C_R) has been determined by the electrical conductivity. The rheological results reveal a dramatic increase in solution viscosity around the CAC, attributed to interpolymer cross-linking through the formation of mixed micelles involving the carboxylic acid groups of NaCMC and the surfactant.     

Equilibrium and Dynamic Surface Tension of Carboxymethylchitosan and Alkyl Trimethylammonium Bromide Mixtures

A water-soluble derivative of chitosan, carboxymethylchitosan (CMCH), was mixed with alkyltrimethylammoniumbromides (C_mTAB) and was studied on the adsorption at air/water interface using equilibrium and dynamic surface tension method. The effects of surfactant and polymer concentrations, surfactant chain length, as well as pH of solution were investigated. Addition of the surfactants remarkably promotes the polymer adsorption. Increasing any one of surfactant concentration, surfactant chain length, and pH will facilitate the adsorption of the mixture whereas little effects of polymer concentration were observed. The results are explained in terms of the interaction between CMCH and C_mTAB under different conditions.     

羧甲基纤维素钠／羟乙基纤维素复合溶液的性能

羧甲基纤维素钠（ＮａＣＭＣ）和羟乙基纤维素（ＨＥＣ）作为油田用驱油剂，具有抗剪切能力强，原料丰富和对环境污染少等优点，但单独使用效果不理想．前者虽有较好的增粘性，但易受油藏温度、盐度的影响；后者虽有较好的耐温、耐盐性，但其增稠能力较差、用量较大［１，...     

可聚合囊泡体系(烯丙基-二甲基-十二烷基溴化胺和十二烷基硫酸钠)在溶液中的盐效应

高稳定的囊泡广泛用于制作生物模型、药物输送以及合成纳米材料的模板。获得高稳定囊泡结构的重要方法之一是用聚合反应固定囊泡结构。作为可聚合囊泡制备的前期基础工作,研究了一种可聚合的囊泡体系：1-丙烯基－2,2,二甲基－十二烷基溴化胺（ADDB）和ADDB与十二烷基磺酸钠（SDS）的等摩尔比混合体系。该囊泡体系即使在高浓度盐水中也能够自发地形成均相的囊泡溶液。在聚合之前,采用动态激光光散射（DLS）、冷冻蚀刻透射电镜（FF-TEM）技术研究了可聚合囊泡的盐效应。DLS测试发现没有盐存在时,囊泡大小为83 nm,盐的浓度增加到250 mmol/L时,囊泡尺寸增大到250 nm。然而继续增大盐浓度到1000 mmol/L, 囊泡尺寸减小到180nm. FF-TEM结果发现盐浓度小于150 mM时, 单个囊泡为70 nm左右,然而明显存在囊泡的絮凝与融合;当盐浓度增加到400 mM时,单个囊泡尺寸减小到20 nm. 因此DLS 观测到囊泡尺寸增大的原因是由于囊泡的絮凝与融合;而尺寸减小的原因是由于在高盐浓度下,盐屏蔽了带电颗粒之间的静电相互作用,在熵增的驱使下,大囊泡变成小囊泡。     

Location of Pinacyanol in Micellar Solutions of N-Alkyl Trimethylammonium Bromide Surfactants

The interaction of pinacyanol (PIN), a cationic dye formed by monomer and dimer species, with three cationic surfactants (DTAB, TTAB, and HTAB) has been studied spectroscopically and by acid-base equilibrium in the micellar concentration range. In the presence of surfactants, the absorption maximum of the two main peaks undergoes bathochromic shifts. The spectral shifts suggest a hydrophobic environment of the chromophore. The presence of micelles favors the monomer species; i.e., it reduces the extent of dimerization. The pK(a) of PIN in micellar medium is similar to the value in pure water. When acid-base equilibrium was considered, the changes in the interfacial pK(a) allowed to us to determine the constant dielectric for the interfacial region (epsilon=69). This led to the conclusion that the dye must be solubilized between the solution and the hydrocarbon chain core, i.e., in the aqueous micellar interface. This location can be explained by a cation-pi interaction between the uncharged ring system of the dye and the cationic headgroups of the surfactants. Copyright 2001 Academic Press.     

二甲苯蓝FF-十六烷基三甲基溴化铵分光光度法测定痕量亚硝酸根

1 引言亚硝酸根是水质、食品和环境检测的重要指标之一.目前,测定亚硝酸根的方法已有不少,作者发现,在稀盐酸介质中,十六烷基三甲基溴化铵的存在可使二甲苯蓝FF与亚硝酸根的反应灵敏度提高,选择性增强,从而建立了测定亚硝酸根的新方法.     

Sol-gel Transition of Methylcellulose Solution in the Coexistence of Hexadecyltrimethylammonium Bromide and Sodium Chloride

The sol-gel transition of methylcellulose (MC) solution in the presence of NaCl and hexade-cyltrimethylammonium bromide (HTAB), together with MC/NaCl solution in the presence of HTAB and MC/HATB solution in the presence of NaCl, was investigated by the rheolog-ical measurements. It has been found that the sol-gel transition temperature of MC solution decreases linearly with the concentration of NaCl in solution but increases linearly with the concentration of HTAB in solution, respectively. However, the sol-gel transition temperature of MC/NaCl solution in the presence of HTAB keeps the same value, independent of theconcentration of HTAB in solution. On the other hand, the sol-gel transition temperature of MC/HTAB solution decreases linearly with the concentration of NaCl in solution. The experimental results suggest that, for MC/NaCl solution in the presence of HTAB, the salt-induced spherical micelles of HTAB should have formed in bulk solution. For MC solution in the absence of NaCl, no spherical micelles have been formed in bulk solution, though the concentration of HTAB in our experiment is almost one order of magnitude higher than the critical micelle concentration of HTAB in polymer-free solution. In fact, due to adsorption of HTAB on MC chains, the realconcentration of HTAB in bulk solution, is much less than the apparent concentration of HTAB dissolved in MC solution.     

羧甲基纤维素钠水凝胶的制备及其生物降解性研究

用羧甲基纤维素钠(CMC—Na)制得了含水量高达98％的水凝胶，考察了防腐剂、交联剂、无机态氮素、有机态氮素、碳水化合物的加入量以及环境中pH值等因素对生物降解性的影响。结果表明：制备条件不同，水凝胶的生物降解性不同；环境中一定量铵根离子的存在有利于水凝胶的生物降解；在pH=5．2的环境中纤维素酶活性最高，降解程度最大。