Induced Correspondence of a Local π‐Aromatic Sextet in Heteroannulenes: Synthesis and Characterization

Acid‐catalyzed [3+3] condensation reactions of two hitherto unknown tripyrrane moieties with pentafluorobenzaldehyde has led to the formation of new generation heteroannulene (4.1.4.1) and mutant heteroannulene (1.1.1.1.1.1). Inclusion of local π‐aromatic sextets, namely the N‐methyl pyrrole rings through β,β‐linkages and α,β‐linkages, has led to the isolation of first ever heteroannulenes cross‐conjugated at four points and two points respectively within the macrocycles.     

A new entry to doubly N-confused [26]hexaphyrins(1.1.1.1.1.1) from normal [26]hexaphyrins(1.1.1.1.1.1) through an unprecedented double pyrrolic rearrangement

Treatment of hexakis(pentafluorophenyl)-substituted [26]hexaphyrin(1.1.1.1.1.1) (1) with CuCl in the presence of pyridine and molecular oxygen led to formation of doubly N-confused [26]hexaphyrin(1.1.1.1.1.1) 2 in a moderate yield through an unprecedented double pyrrolic rearrangement. Macrocycle 2 has been shown to serve as an effective bis-metal-coordinating ligand and exhibits attractive optical properties such as a sharp Soret-like band at 566 nm and low-energy fluorescence at 1058 nm.     

Unexpected formation of β, meso-directly linked diporphyrins under Adler–Longo reaction conditions

Unexpected formation of β, meso-directly linked diporphyrin products has been described in the reactions of β-formyl porphyrins with pyrrole under Adler–Longo reaction conditions. Preliminary mechanistic studies indicates that β-dipyrromethane substituted porphyrin structure is the crucial intermediate for the formation of diporphyrin product.     

A calorimetric and computational study of the thermochemistry of halogenated 1-phenylpyrrole derivatives

The standard molar enthalpies of formation, in the crystalline phase, of three halogenated 1-phenylpyrrole derivatives, namely 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were derived from the respective enthalpies of combustion, measured by rotating-bomb combustion calorimetry. Their enthalpies of sublimation, at T = 298.15 K, were obtained from the Knudsen mass-loss effusion technique. From these two experimental parameters, the standard molar enthalpies of formation, in the gaseous phase, at T = 298.15 K, of 1-(4-fluorophenyl)pyrrole, 1-(4-chlorophenyl)pyrrole, and 1-(4-iodophenyl)pyrrole were calculated, respectively, as (26.2 ± 2.4) kJ · mol⁻¹, (196.2 ± 2.5) kJ · mol⁻¹, and (311.5 ± 2.4) kJ · mol⁻¹.The gas-phase enthalpies of formation of both fluorine and chlorine compounds were estimated by G3(MP2)//B3LYP computations. For the iodine compound, the B3LYP/6-311G(d):ECP46MDF approach was employed. Additionally, the DFT calculations were extended to estimate the enthalpy of formation of the bromine derivative, 1-(4-bromophenyl)pyrrole, performed at the B3LYP/6-311G(d) level of theory.     

Rate Dependence on Inductive and Resonance Effects for the Organocatalyzed Enantioselective Conjugate Addition of Alkenyl and Alkynyl Boronic Acids to β-Indolyl Enones and β-Pyrrolyl Enones

Two key factors bear on reaction rates for the conjugate addition of alkenyl boronic acids to heteroaryl-appended enones: the proximity of inductively electron-withdrawing heteroatoms to the site of bond formation and the resonance contribution of available heteroatom lone pairs to stabilize the developing positive charge at the enone β-position. For the former, the closer the heteroatom is to the enone β-carbon, the faster the reaction. For the latter, greater resonance stabilization of the benzylic cationic charge accelerates the reaction. Thus, reaction rates are increased by the closer proximity of inductive electron-withdrawing elements, but if resonance effects are involved, then increased rates are observed with electron-donating ability. Evidence for these trends in isomeric substrates is presented, and the application of these insights has allowed for reaction conditions that provide improved reactivity with previously problematic substrates.     

New method for the synthesis of indole-and benzothiophene-containing condensed systems

A new method is described for the synthesis of the heterocyclic systems of benzo[b]thiophenoindoles from the respective isomeric amino acids with amino groups at positions 2 and 3. The method makes it possible to produce the tetracyclic systems with both angular and linear structure. The classical Fischer reaction served as model for such transformations. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 361–367, March, 2007.     

A new approach to the synthesis of indole-and benzofuran-containing tetracyclic condensed systems

A new method is described for the synthesis of the 1H-benzo[b]furoindole heterocyclic systems from the corresponding isomeric amino acids with amino groups at positions 2 and 3. By this method it is possible to obtain these tetracyclic systems not only in the form of one isomer but also to convert them from one to the other. From the tetracyclic systems with angular structure it is possible to obtain the corresponding linear isomers. On the other hand, from the isomer with the linear structure it is possible to change to the isomer with angular fusion of the pyrrole ring. The classical Fischer reaction served as model for such transformations. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1463–1471, October, 2007.     

Efficient [Cu(NHC)]‐Catalyzed Multicomponent Synthesis of Pyrroles

Efficient [Cu(NHC)]‐catalyzed syntheses of pyrroles via two and three‐component coupling methods are described. Various 1,2‐, 1,2,3‐, 1,2,3,5‐ and fully substituted pyrroles were readily accessible through a suitable choice of ketone, primary amine and diol in a three‐component reaction. The N‐unsubstituted pyrrole formation is also feasible through a two‐component reaction involving a β‐amino alcohol and a ketone.     

3-烷基取代吡咯单体的合成

通过电聚合沉积在基底上的聚吡咯膜容易剥离的问题可以通过粘合增强剂解决。我们设计并合成一类新化合物w-3-吡咯烷基磷酸将聚吡咯膜 通过化学键键合到金属基底上。本文描述了合成含有表面反应功能团的3-取代吡咯的过程。1-苯磺酰吡咯作为起始物经付-克反应得到3-取代吡咯。两种方法可以合成w-3-吡咯烷基磷酸酯。一种路线是：先磷酸化然后脱保护基最后还原羰基。这种方法适用于含有六个碳及以上的取代基。另一种路线是：先还原羰基然后磷酸化及脱保护。这种方法适用于短链及长链取代基。最后水解得到w-3-吡咯烷基磷酸。     

吡咯型氮快速热解中NH3和HCN生成机理研究

根据煤中吡咯五元环与其他杂环结合形式的不同,选择五种典型的吡咯型氮杂环结构作为考察对象,利用量子化学计算方法对吡咯型氮杂环及其热解中间产物中各键的Mayer键级进行了计算。通过对比Mayer键级的相对大小对分子结构中最易发生断裂的键进行判断,进而分析了吡咯型氮热解时NH₃和HCN的生成机理。通过计算结果表明,热解时吡咯型氮以-NH和-NH₂自由基的形式逸出,并主要转化为NH₃;氮的逸出过程因吡咯环与芳环结合方式的不同而存在差异。为验证计算结果,利用滴落式高频炉热解装置对吡咯和咔唑两种模型化合物进行了快速热解实验。结果表明,吡咯和咔唑热解时NH₃和HCN均有生成,NH₃是主要的含氮气体污染物。计算所得的结论在一定程度上得到了实验结果的支持。     

Silica Gel,an Effective Catalyst for the Reaction of Electron-Deficient Nitro-Olefins with Nitrogen Heterocycles

The reaction of electron-deficient olefins with nitrogen heterocycles such as pyrrole and indole was examined in the presence of silica gel at room temperature under stirring at solvent-free conditions. It was found that silica gel is an effective catalyst for this conjugate addition. This work resulted in the formation of monosubstituted pyrroles selectively as a major product except in a few cases where disubstituted pyrroles were also formed as side products. Thus, a simple, rapid, efficient, environmentally benign, and solvent-free method was established.     

新型吡咯季铵盐的合成

以乙酰乙酸乙酯为原料,经缩合、氧化、还原和氯代等反应合成了3-甲基-5-碘甲基-1H-吡咯-2,4-二(甲酸乙酯)(5);5分别与乌洛托品,吡啶和三甲胺经取代反应合成了3个吡咯季铵盐6a~6c,其中5和6a~6c均为新化合物,其结构经1H NMR,IR和ESI-MS表征。     

Synthesis of new 3-cyanoacetamide pyrrole and 3-acetonitrile pyrrole derivatives

A new fused heterocyclic derivatives of pyrrole containing acetonitrile or cyanoacetonitrile moiety at 3-position is described by a one-pot multicomponent reaction. The reaction of dimedone, various aniline, aryl glyoxal with malononitrile/ethyl cyanoacetate/methyl cyanoacetate under mild conditions. The present method does not involve any hazardous organic solvents or catalysts. The significant features of this method are readily available starting materials, good yields, and easy purification.     

La(OTf)3 catalyzed synthesis of α-aryl tetrasubstituted pyrroles through [4+1] annulation under microwave irradiation

A La(OTf)₃ catalyzed synthesis of tetrasubstituted pyrroles under microwave irradiation has been developed affording various α-aryl tetrasubstituted pyrroles in acceptable to good yields (36–82% yield) through condensation/alkyne azacyclization/isomerization sequence. Functionalized α-aryl pentasubstituted pyrroles could be prepared from tetrasubstituted pyrroles through easy transformations.     

Thermal study of polypyrrole complexes with vermiculites of different layer charge

We have studied the synthesis of polypyrrole-clay nanocomposites by the in situ oxidative polymerization of pyrrole in the interlayer space of vermiculites with different layer charges from Santa Olalla and Ojén, Spain. Moreover, the influence of different interlayer cations (Na⁺, Mg²⁺, Fe³⁺) on the interaction between pyrrole and the vermiculties was studied. The resulting materials were characterized by means of DTA-TG, XRD, FTIR and Mössbauer spectroscopy. In all samples polymerization of pyrrole was observed, presumably triggered by the structural iron. In most cases it was found to be externally deposited. An uptake of pyrrole in the interlayer space and PPy formation is observed in the case of the Fe³⁺-intercalated Ojén vermiculite, which has a lower layer charge than the Santa Olalla vermiculite.     

Optimization of Polypyrrole Chemical Synthesis by Heat Flow Reaction Calorimetry

Chemical polymerization of pyrrole (Py) was carried out in a reaction calorimeter by using FeCl₃ or CuCl₂ as an oxidant in an acetonitrile medium. The formation heat of polypyrrole (PPy), determined under a wide range of reactant concentrations and reaction temperatures, is directly related to the PPy yields and to the degree of polymerization. Due to the negative values of both the entropy and enthalpy of the reaction the gravimetric yield is inversely related to the temperature and directly to the Py concentration. The yields to the PPy and the related reaction heats, are close to zero when the ceiling temperatures are reached (T_ceil=348 K for Fe-doped and T_ceil=313 K for Cu-doped PPys). It was observed that a ceiling concentration corresponds to each ceiling temperature and only light oligomers are formed if Py concentration is too low. The electric conductivity values of the products were also determined and a direct relationship to the yields was found as well. The highest electric conductivity value (C=0.6 S cm^–1) was related to the PPy fresh synthesized from a 0.017 M Py solution.This revised version was published online in November 2005 with corrections to the Cover Date.     

α,α′,α″,α′″-meso-tetrahexyltetramethyl-calix[4]pyrrole: an easy-to-prepare,isomerically pure anion extractant with enhanced solubility in organic solvents

α,α′,α″,α′″-meso-Tetrahexyltetramethyl-calix[4]pyrrole is easily obtained as a single diastereomer in a one-pot reaction. It exhibits enhanced solubility in organic solvents, including aliphatic solvents, relative to its parent meso-octamethylcalix[4]pyrrole (1). Somewhat surprisingly, the tetrahexyl derivative 2 complexes with tributylmethylammonium chloride in chloroform more strongly than does 1 as shown by NMR titrations. However, 1 and 2 exhibit comparable complexation strength in extraction experiments, the difference between the NMR and extraction results being attributed to the effect of organic-phase water in the extraction systems. Mass-action analysis indicates the formation of the predominant complex TBMA⁺(1 or 2)Cl^? in both NMR and extraction systems, and equilibrium constants are reported. x-Ray crystal structures were obtained for the free ligand 2 and its complex with tetramethylammonium chloride. The free ligand crystallises in the 1,3-alt conformation with equatorial hexyl arms. In the chloride complex with 2 in its cone conformation, the hexyl arms adopt an axial orientation, enveloping the anion. DFT calculations show this binding conformation to be the most stable, mostly owing to destabilising steric interactions involving the pyrrole C–H and alkyl C–H groups positioned equatorially.     

Catalytic Hydrogenation of meso‐Octamethylporphyrinogen (Calix[4]pyrrole)

Hydrogenation of meso‐octamethylporphyrinogen (calix[4]pyrrole) with a number of heterogeneous catalysts under different experimental conditions has been investigated. GC‐MS analyses of the reaction mixtures showed the formation of one to four products in low to moderate yields: three of them were diastereoisomers of the product derived from half‐hydrogenation of the substrate, and displayed alternating pyrrolidine and pyrrole rings, while the fourth was the all‐cis saturated product. An acidic medium was necessary to achieve hydrogenation. However, the use of too strongly acidic solvents or additives was detrimental to the stability of the substrate and/or the catalyst.