Influence of the block geometry on the voltammetric response of partially blocked electrodes: Application to interfacial liquid–liquid kinetics of aqueous vitamin B12S with random arrays of femtolitre microdroplets of dibromocyclohexane

The cyclic voltammetric response of electrodes modified with catalytically reactive blocks is simulated using finite difference methods. The responses of three different models using various block geometries are studied. The results are used to determine kinetic parameters of coupled liquid|liquid interfacial reactions. First, we examine the liquid–liquid reaction between aqueous vitamin B_12S and pure trans-dibromocyclohexane (DBCH) microdroplets immobilized on a basal plane pyrolytic graphite (bppg) surface, immersed in an aqueous solution of vitamin B₁₂. Second, cyclic voltammetry on electrodes modified with microdroplets of DBCH diluted in dodecane is employed to determine the apparent bimolecular interfacial rate constant for the initial step in the DBCH(oil)/B_12S(aq) reaction. The results are compared with a previous SECM/ITIES study of a similar reaction.     

Noise and ac impedance analysis of ion transfer kinetics at the micro liquid/liquid interface

Fluctuation analysis was utilized to determine the TEA ion transfer kinetics across the water/1,2-dichloroethane interface. The obtained data were compared with those derived from electrochemical impedance spectroscopy experiments using the same electrolytic cell. The apparent standard rate constants k_s determined by these two techniques have a similar value. The average value k_s = 0.37 cm s^− 1 is comparable with the previously reported value k_s = 0.2 cm s^− 1. The experimental approach utilizing a thick wall glass micro-capillary to fix the interface exhibits a very small stray capacitance value, proving this system to be suitable for determining the kinetics of the fast ion transfer across a liquid/liquid interface. Application of a method employing a small perturbation signal prevents polarization of the inner capillary surface by current flowing through the cell. The induced polarization of the capillary can affect ion concentration at the interface due to electroosmosis and thus make the kinetic data evaluation difficult or erroneous.     

Study on dynamic interfacial tension of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide at liquid/liquid interface

Dynamic interfacial tension between aqueous solutions of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide (R₁₂HTAB) and n-hexane were measured using the spinning drop method. The effects of the R₁₂HTAB concentration (the concentration below the CMC) and temperature on the dynamic interfacial tension have been investigated; the reason of the change of dynamic interfacial tension with time has been discussed. The effective diffusion coefficient, D_a, and the adsorption barrier, _a, have been obtained from the experimental data using the extended Word–Tordai equation. The results show that the dynamic interfacial tension becomes smaller while _a becomes higher with increasing R₁₂HTAB concentration in the bulk aqueous phase. D_a decreases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 0.87 × 10⁻¹² m⁻² s⁻¹ while _a increases from 5.41 kJ mol⁻¹ to 7.74 kJ mol⁻¹ with the increase of concentration in the bulk solution of R₁₂HTAB from 0.5 × 10⁻³ mol dm⁻³ to 4 × 10⁻³ mol dm⁻³. Change of temperature affects the adsorption rate through altering D_a and _a. The value of D_a increases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 13.98 × 10⁻¹² m⁻² s⁻¹ while that of _a decreases from 5.41 kJ mol⁻¹ to 5.07 kJ mol⁻¹ with temperature ascending from 303 K to 323 K. The adsorption of surfactant from the bulk phase into the interface follows a mixed diffusion–activation mechanism, which has been discussed in the light of interaction between surfactant molecules, diffusion and thermo-motion of molecules.     

NaIO4-mediated C-H activation of alkylbenzenes and alkanes with LiBr

NaIO₄ oxidizes lithium bromide efficiently under acidic conditions to functionalize alkylbenzenes and alkanes and produce the corresponding bromo and acetoxy derivatives in excellent yields. The protocol also demonstrates the direct conversion of cyclohexane into trans-1,2-dibromocyclohexane in moderate yield.     

Detection of hydrogen peroxide produced at a liquid/liquid interface using scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) was used to monitor in situ hydrogen peroxide (H₂O₂) produced at a polarized water/1,2-dichloroethane (DCE) interface. The water/DCE interface was formed between a DCE droplet containing decamethylferrocene (DMFc) supported on a solid electrode and an acidic aqueous solution. H₂O₂ was generated by reducing oxygen with DMFc at the water/DCE interface, and was detected with a SECM tip positioned in the vicinity of the interface using a substrate generation/tip collection mode. This work shows unambiguously how the H₂O₂ generation depends on the polarization of the liquid/liquid interface, and how proton-coupled electron transfer reactions can be controlled at liquid/liquid interfaces.     

Vermiculite-aliphatic amine interactions at the solid/liquid interface: a thermodynamic approach

Polar n-alkylmonoamines of general formula H₃C(CH₂) _n NH₂ (n = 1, 3, 5) interacted with layered silicate vermiculite at the solid/liquid interface. The maximum amount of amine intercalated (N _f ) inside the interlamellar space were 0.62, 0.46, and 0.38 mmol g⁻¹, to give the following order of intercalation ethyl → butyl → hexylamines. The layered vermiculite solid was suspended in deionized water and calorimetrically titrated with this series of amines, to give favorable thermodynamic data, such as exothermic enthalpy, negative Gibbs free energy and positive entropy data.     

Atmospheric reactions of chloroethenes with the OH radical

The kinetics and products of the homogeneous gas-phase reactions of the OH radical with the chloroethenes were investigated at 298 ± 2 K and atmospheric pressure. Using a relative rate technique and ethane as a scavenger for the chlorine atoms produced in these OH radical reactions, rate constants (in units of 10^?12 cm³ molecule^?1s^?1) of 8.11 ± 0.24, 2.38 ± 0.14, and 1.80 ± 0.03 were obtained for 1,1-dichloroethene, cis-1, 2-dichloroethene and trans-1,2-dichloroethene, respectively. Under these conditions, the major products observed by long pathlength FT-IR absorption spectroscopy were HCHO and HC(O)Cl from vinyl chloride; HC(O)Cl from cis- and trans-1,2-dichloroethene; HCHO and COCl₂ from 1,1-dichloroethene; HC(O)Cl and COCl₂ from trichloroethene; and COCl₂ from tetrachloroethene. In the absence of a Cl atom scavenger, significant yields of the chloroacetyl chlorides, CH_xCl_3?xC(O)Cl, were observed from 1,1-dichloro-, trichloro- and tetrachloroethene, indicating that these products resulted from reactions involving chlorine atoms. The yields of all of these products are reported and the mechanisms of these gas-phase reactions discussed. In addition, OH radical reaction rate constants were redetermined, in the presence of a Cl atom scavenger, for cis- and trans-1,3-dichloropropene and 3-chloro-2-chloromethyl-1-propene, being (in units of 10^?12 cm³ molecule^?1 s^?1) 8.45 ± 0.41, 14.4 ± 0.8, and 33.5 ± 3.0, respectively.     

Alkylation of β-dicarbonyl compounds with 1,2-dibromocyclohexane

Alkylation of acetylacetone, ethyl acetoacetate, and diethyl malonate with 1,2-dibromocyclohexane in the presence of K₂CO₃ in DMSO occurs only asC-alkylation accompanied by dehydrobromination, whereas a similar reaction of dimedone follows bothC- andO-alkylation pathways. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 317–319, February, 1998.     

Electrosynthesis in a microemulsion using a novel cobaloxime catalyst

[Bis[μ-[(2,3-butanedione dioximato)(2-)-O:O′]]tetrafluorodiborato(2-)-N,N′,N″,N]cobalt (COBF, 1) was used as a catalyst for the conversion of trans-1,2-dibromocyclohexane (DBCH) to cyclohexene and the photoelectrochemical cyclisation of 2-(4-bromobutyl)-2-cyclohexen-1-one (BBC) to trans-1-decalone 2 in a microemulsion. Voltammetry showed clear evidence of catalytic behaviour and bulk electrolysis showed larger turnover numbers for both reactions when compared with the same system using vitamin B_12a as catalyst. For BBC, improved turnover may result from a relatively weak carbon–cobalt bond in the alkylcobalt intermediate of 1, and from better partition of 1 into the organic phase in which reactant BBC resides.     

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

An efficient and convenient protocol for the synthesis of novel 1′H-spiro[isoindoline-1,2′-quinazoline]-3,4′(3′H)-dione derivatives

Abstract  An efficient and direct procedure for the synthesis of novel spiro[isoindoline-1,2′-quinazoline]-3,4′(3′H)-dione derivatives is described. The process employs a condensation reaction of 2-aminobenzamides and isatins in the presence of a catalytic amount of KAl(SO₄)₂.12H₂O (alum) in ethanol under reflux. Graphical Abstract        

Rate constants for the reactions of chlorine atoms with hydrochloroethers at 298 k and atmospheric pressure

The relative rate technique has been used to determine the rate constants for the reactions Cl + CH₃OCHCl₂ → products and Cl + CH₃OCH₂CH₂Cl → products. Experiments were carried out at 298 ± 2 K and atmospheric pressure using nitrogen as the bath gas. The decay rates of the organic species were measured relative to those of 1,2‐dichloroethane, acetone, and ethane. Using rate constants of (1.3 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1, (2.4 ± 0.4) × 10^?12 cm³ molecule^?1 s^?1, and (5.9 ± 0.6) × 10^?11 cm³ molecule^?1 s^?1 for the reactions of Cl atoms with 1,2‐dichloroethane, acetone, and ethane respectively, the following rate coefficients were derived for the reaction of Cl atoms (in units of cm³ molecule^?1 s^?1) with CH₃OCHCl₂, k= (1.04 ± 0.30) × 10^?12 and CH₃OCH₂CH₂Cl, k= (1.11 ± 0.20) × 10^?10. Errors quoted represent two σ, and include the errors due to the uncertainties in the rate constants used to place our relative measurements on an absolute basis. The rate constants obtained are compared with previous literature data and used to estimate the atmospheric lifetimes for the studied ethers. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 420–426, 2005     

Reactions of nido-1,2-(Cp*RuH)2B3H7 with RCCR′ (R, R′=H, Ph; Me, Me) to yield novel metallacarboranes

Addition of the internal alkyne, 2-butyne, to nido-1,2-(Cp*RuH)₂B₃H₇ (1) at ambient temperature produces nido-1,2-(Cp*Ru)₂(μ-H)(μ-BH₂)-4,5-Me₂-4,5-C₂B₂H₄ (2), nido-1,2-(Cp*RuH)₂-4,5-Me₂-4,5-C₂B₂H₄ (3), and nido-1,2-(Cp*RuH)₂-4-Et-4,5-C₂B₂H₅ (4), in parallel paths. On heating, 2, which contains a novel exo-polyhedral borane ligand, is converted into closo-1,2-(Cp*RuH)₂-4,5-Me₂-4,5-C₂B₃H₃ (5) and nido-1,6-(Cp*Ru)₂-4,5-Me₂-4,5-C₂B₂H₆ (6) the latter being a framework isomer of 3. Heating 2 with 2-butyne generates nido-1,2-(Cp*RuH)₂-3-{CMeCMeB(CMeCHMe)₂}-4,5-Me₂-4,5-C₂B₂H₃ (7) in which the exo-polyhedral borane is triply hydroborated to generate a boron bound ---CMeCMeB(CMeCHMe)₂ cluster substituent. Along with 3, 4, 5, 6, and 7, the reaction of 1 with 2-butyne at 85 °C gives closo-1,7-(Cp*Ru)₂-2,3,4,5-Me₄-6-(CHMeCH₂Me)-2,3,4,5-C₄B (8). Reaction of 1 with the terminal alkyne, phenylacetylene, at ambient temperature permits the isolation of nido-1,2-(Cp*Ru)₂(μ-H)(μ-CHCH₂Ph)B₃H₆ (9) and nido-1,2-(Cp*Ru)₂(μ-H)(μ-BH₂)-3-(CH₂)₂Ph-4-Ph-4,5-C₂B₂H₄ (11). The former contains a Ru---B edge-bridging alkylidene fragment generated by hydrometallation on the cluster framework whereas the latter contains an exo-polyhedral borane like that of 2. Thermolysis of 11 results in loss of hydrogen and the formation of closo-1,2-(Cp*RuH)₂-3-(CH₂)₂Ph-4-Ph-4,5-C₂B₃H₃ (12).     

Chiral functionalized bisphosphine ligands: Transition metal complexes of 1,2-bis(tert-Butylchlorophosphino)-1,2-dicarba-closo-dodecaborane(12)

When rac- or meso-1,2-bis(tert-butylchlorophosphino)-1,2-dicarba-closo-dodecaborane(12) (1a or 1b) is reacted with [M(CO)₄(NBD)] (M = Cr, Mo, NBD = norbornadiene), [Mo(CO)₄(EtCN)₂] or [W(CO)₆], rac-[Cr(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (2), rac- or meso-[Mo(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (3a or 3b) and rac-[W(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (4) could be isolated as pure diastereomers. UV irradiation of 1 with [Cr(CO)₆] in moist THF proceeds with hydrolysis and formation of [Cr(CO)₄{1,2-(P(OH)^tBu)₂C₂B₁₀H₁₀}] (5) which contains the metal complex-stabilized phosphinous acid. Compounds 2–5 were characterized spectroscopically (¹H, ³¹P, ¹¹B, ¹³C NMR), by mass spectrometry and by X-ray structure determination.     

Rate constants of reactions of chlorine atoms with aliphatic hydrocarbons and halogen derivatives in the liquid phase

The kinetics of liquid phase chlorination of methane in a difluorodichloromethane medium has been studied in a temperature interval of 293–150 K. The value of activation energy found for the hydrogen abstraction stage by a chlorine atom (E₁) equals 14.2 ± 2.5 kJ/mol, with the processes of chlorine atoms recombination and the cage effect being taken into account. The method of competitive reactions has been employed to assess the constants of reaction of chlorine atoms (k₁) with ethane, propane, hexane, ethylene, allyl bromide, allyl chloride, ethyl chloride, and cyclohexane in nonpolar solvents, viz. difluorodichloromethane and 1,2-dibromotetrafluoroethane. The values (k₁) obtained in the liquid phaseare two to four orders lower than those in the gas phase, while the activation energy is 2–6 kJ/mol higher.     

Theoretical study on reactions of cyclic-N3 with NO, NO2 and Cl2

In this article, we report our detailed mechanistic study on the reactions of cyclic-N₃ with NO, NO₂ at the G3B3//B3LYP/6-311+G(d) and CCSD(T)/aug-cc-pVTZ//QCISD/6-311+G(d)+ZPVE levels; the reactions of cyclic-N₃ with Cl₂ was studied at the G3B3//B3LYP/6-311+G(d) and CCSD(T)/aug-cc-pVTZ//QCISD/6-31+G(d)+ZPVE levels. Both of the singlet and triplet potential-energy surfaces (PESs) of cyclic-N₃ + NO, cyclic-N₃ + NO₂ and the PES of cyclic-N₃ + Cl₂ have been depicted. The results indicate that on singlet PESs cyclic-N₃ can undergo the barrierless addition–elimination mechanism with NO and NO₂ forming the respective dominant products N₂ + ¹cyclic-NON and ¹NNO(O) + N₂. Yet the two reactions on triplet PESs are much less likely to take place under room temperature due to the high barriers. For the cyclic-N₃ + Cl₂ reaction, a Cl-abstraction mechanism was revealed that results in the product cyclic-N₃Cl + Cl with an overall barrier as high as 14.7 kcal/mol at CCSD(T)/aug-cc-pVTZ//QCISD/6-31+G(d)+ZPVE level. So the cyclic-N₃ radical could be stable against Cl₂ at low temperatures in gas phase. The present results can be useful for future experimental investigation on the title reactions.     

Thiophene separation from aliphatic hydrocarbons using the 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid

The ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate has been tested as solvent for the separation of thiophene from aliphatic hydrocarbons. Liquid–liquid equilibrium data have been determined for ternary systems containing the ionic liquid, thiophene and C₆, C₇, C₁₂ or C₁₆ alkanes at T = 298.15 K. The performance of the ionic liquid as solvent in such systems has been evaluated. The experimental data were correlated using the NRTL and UNIQUAC equations, and the binary interaction parameters have been reported. The phase diagrams for the ternary mixtures including both the experimental and calculated tie-lines have been presented.     

Dipstick based immunochemiluminescence biosensor for the analysis of vitamin B12 in energy drinks: A novel approach

In this article, we describe a dipstick based immunochemiluminescence (immuno-CL) biosensor for the detection of vitamin B₁₂ in energy drinks. The method is a direct competitive type format involving the immobilization of vitamin B₁₂ antibody on nitrocellulose membrane (NC) followed by treatment with vitamin B₁₂ and vitamin B₁₂–alkaline phosphatase conjugate to facilitate the competitive binding. The dipstick was further treated with substrate disodium 2-chloro-5-(4-methoxyspiro {1,2-dioxetane-3,2¢-(5¢-chloro)tricyclo[3.3.1.13,7]decan}-4-yl)-1-phenyl phosphate (CDP-Star) to generate chemiluminescence (CL). The number of photons generated was inversely proportional to the vitamin B₁₂ concentration. After systematic optimization, the limit of detection was 1 ng mL⁻¹. The coefficient of variation was below 0.2% for both intra- and inter-assay precision. Vitamin B₁₂ was extracted from energy drinks with recovery ranged from 90 to 99.4%. Two different energy drinks samples were analyzed, and a good correlation was observed when the data were compared with a reference enzyme linked immuno sorbent assay (ELISA) method. The developed method is suitable for an accurate, sensitive, and high-throughput screening of vitamin B₁₂ in energy drinks samples. The dipstick technique based on immuno-CL is suitable for the detection of several analyte in food and environmental samples.     

First-principles study of O2 adsorption and dissociation on the CuCr2O4 (100) surface

The adsorption and dissociation of molecular oxygen on spinel CuCr₂O₄ (100) surface were carried out by first-principles calculations based on density functional theory (DFT). The calculated results indicate that the Cr site is most favorable for atomic oxygen adsorption, with an adsorption energy of 402.8 kJ/mol. For molecular oxygen adsorption, there are three types of favorable interaction modes: O₂ forms bonds with the Cu site or O₂ binds to two Cr sites or O₂ interacts with both Cu and Cr sites simultaneously. The lowest activation energy (E_a = 35.4 kJ/mol) was found through exploring possible reaction pathways for O₂ dissociation. The relationship between E_a and reaction enthalpy (ΔH) for O₂ dissociation adsorption reactions fits Brønsted-Evans-Polanyi (BEP) behavior.