RAFT polymerization of linear ABC triblock copolymer P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS-<Emphasis Type="Italic">b</Emphasis>-P2VP and regulation of its hierarchical self-assembly structure in solution

Linear ABC triblock copolymer PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ was successfully synthesized by RAFT polymerization. Block copolymer micelles were prepared by the two-step hierarchical self-assembly process. Size exclusion chromatography and ¹H NMR were used to characterize the structure of samples. Morphologies and size of micelles were determined by transmission electron microscope. The results showed that the densely dispersed spherical micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were obtained in the first step of the hierarchical self-assembly process. In the second step, core-compartmentalized micelle strings with different lengths and distribution densities were obtained when the primary self-assembled solution was dialyzed in distilled water with pH ≈ 3. When distilled water with pH ≈ 3 was added drop-wise to this solution, uniformly dispersed spherical core-compartmentalized micelles of PtBA₁₅₄-b-PS₃₀₀-b-P2VP₂₄₀ were prepared. Thus, hierarchical self-assembly structure of linear ABC triblock copolymer was obtained successfully and the preparation of uniformly dispersed spherical micelles of triblock copolymers was realized simply by changing the secondary self-assembly methods.     

Hybridization of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) aggregates in dioxane/water solution

Self-assembly of binary blends of two triblock copolymers of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine), i.e., P4VP₄₃-b-PS₂₆₀-b-P4VP₄₃ (P1) and P4VP₄₃-b-PS₃₆₆-b-P4VP₄₃ (P2), in dioxane/water solution was studied. These two triblock copolymers individually tend to form vesicles (P2) and cylindrical micelles (P1) in dilute solution. It was found that copolymer components in the blend, sample preparation method, and annealing time had significant effect on hybridization aggregate morphology. By increasing P1 content in the copolymer blends, fraction of looped and stretched cylinders increased, while fraction of bilayers decreased. Nearly no bilayer was observed when P1 content was above 85 wt%. On the other hand, fraction of cylinders decreased while fraction of bilayers increased with the increase of P2 content in copolymer blends. Lamellar structures were obtained, when P2 content was 60 wt% in the copolymer blends, whereas cylinders were seldom found when P2 content was above 80 wt%. These results indicate that P1 and P2 copolymer molecules cooperatively participate in the formation of cylinders and vesicles. Some exotic structures, such as lamellae with protruding cylinders (LPC), incomplete vesicles with protruding cylinders (VPC), and cylindrical bilayers, have been kinetically trapped. These structures may result from intramicellar fusion processes in cylindrical micelles. The striking structures represent a compromise between bilayer and cylindrical geometries.     

Micellization and luminescence of PEG-b-P4VP/Europium(III)/1,10-phenanthroline complex

Luminescent micelles were prepared through the self-assembly of poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG₁₁₄-b-P4VP₆₁) and Europium(III) (Eu(III)), with P4VP/Eu(III) as the core, and PEG as the corona. 1,10-phenanthroline (Phen) was assembled into the core of the micelles to sensitize the luminescence. The presence of Phen results into the increasing of apparent average hydrodynamic diameters (D_h^app {\hbox{D}}_{\rm{h}}^{\rm{app}} ) of the micelles. All Eu(III)-containing micelles emitted the characteristic fluorescence of Eu(III). The intensity of luminescence increased with the presence and the increasing quantity of Phen in the complex micelles due to the effective energy transferring of Phen in the “antenna effect”.     

Continuous and Segmented Semiconducting Fiber-like Nanostructures with Spatially Selective Functionalization by Living Crystallization-Driven Self-Assembly

Fiber-like π-conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline-coil block copolymer of oligo(p-phenylenevinylene)-b-poly(2-vinylpyridine) (OPV₅-b-P2VP₄₄), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self-seeding strategy, we were able to prepare monodisperse fiber-like micelles of OPV₅-b-P2VP₄₄ with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber-like micelles remained active toward further epitaxial deposition of OPV₅-b-PNIPAM₄₉ and OPV₅-b-P2VP₄₄ to generate uniform A-B-A and B-A-B-A-B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co-)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber-like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π-conjugated OPV-containing fiber-like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.     

A strategy to stabilize the confined chiral TPPS J-aggregate by ionic block copolymer

Poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG-b-P4VP), with a poly-cation building block, forms electrostatic complexes with the J-type chiral pre-aggregates of 5,10,15,20-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) in the water inner-phase of the TX-100 reverse microemulsion at pH 1.0 using l-tryptophan as the chiral source. The complexation with PEG₄₅-b-P4VP₆ prevents these chiral pre-aggregates from contacting with each other during the percolation of the droplets, so as to stabilize the circular dichroism intensity and the size of the complexes. After breaking the microemulsion, the PEG₄₅-b-P4VP₆/TPPS aggregates are also prevented from further clustering at optimized ratio of [polymer]/[TPPS], so these complex aggregates disperses in acetone with spherical morphology and well maintain their size and chiral signal for further storing. This method can be considered as one of extracting the confined chiral aggregates as an isolated form apart from the reverse microemulsion.     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

Comparison of drug delivery properties of PEG-<Emphasis Type="Italic">b</Emphasis>-pdhpc micelles with different compositions

An anti-tumor drug doxorubicin was encapsulated in micelles of poly（ethylene glycol）-b-poly（2,2-dihydroxyl-methyl propylene carbonate）（PEG-b-PDHPC） diblock copolymers.The morphology of both blank micelles and drug loaded micelles was characterized by TEM.The in vitro drug release profiles of micelles were investigated.The cytotoxicity of the micelles was evaluated by incubating with Hela tumor cells and 3T3 fibroblasts.The drug loaded micelles were co-cultured with HepG2 cells to evaluate the in vitro anti-tumor efficacies.The results showed that the mean sizes of both micelles with different copolymer compositions increased after being loaded with drugs.The drug release rate of PEG₄₅-b-PDHPC₃₄ micelles was faster than that of mPEG₁₁₄-b-PDHPC₂₆,micelles.Both of the two block copolymers were non-toxic.The confocal laser scanning microscopy and flow cytometry results showed that both the drug loaded micelles could be internalized efficiently in HepG2 cells.The PEG₄₅-b-PDHPC₃₄ micelles exhibited higher anti-tumor activity comparing to mPEG₁₁₄-b-PDHPC₂₆ micelles.     

Synthesis of poly(4-vinyl pyridine-b-methyl methacrylate) by MAMA-SG1 initiated sequential polymerization and formation of metal loaded block copolymer inverse micelles

Well-defined poly(4-vinylpyridine) (P4VP) was synthesised by nitroxide-mediated radical polymerization using the BlocBuilder MAMA-SG1. The controlled character of the polymerization was confirmed by kinetic measurements and linear increase of the molar mass with monomer conversion. Poly(4-vinylpyridine) terminated with SG1 was then used as macroinitiator and chain extended to form poly(4-vinylpyridine-b-methyl methacrylate) and poly(4-vinylpyridine-b-(methyl methacrylate-co-styrene)) block copolymers. These block copolymers spontaneously organized into spherical inverse micelles in THF with critical micelle concentrations of 0.1 mg/mL for poly(4VP₁₉₀-b-MMA₉₁) and 0.01 mg/mL for poly(4VP₁₉₀-b-(MMA₅₇-co-S₁₈)) and sizes of 70 and 130 nm (DLS), respectively. The inverse micelles were loaded with copper(II)acetate leading to a slight increase in micelle size. The uniform structure of the inverse micelles was confirmed by FeSEM images, while the presence of copper in the micelle core was established by energy-dispersive X-ray spectroscopy (EDX) and FTIR spectroscopy.     

Preparation of micelles with azo dye and UV absorbent at their cores or coronas using non-amphiphilic block copolymers

Micelles with azo dye and UV absorbent at their cores or coronas were prepared from non-amphiphilic random diblock copolymers by α,ω-diamine. Poly[4-(phenylazophenoxymethyl)styrene-ran-4-(2-hydroxybenzophenoxymethyl)styrene-ran-vinylphenol]-block-polystyrene (P(AS-r-HBS-r-VPh)-b-PSt) and poly(vinylphenol)-block-poly[4-(phenylazophenoxymethyl)styrene-ran-4-(2-hydroxybenzophenoxymethyl)styrene-ran-styrene] (PVPh-b-P(AS-r-HBS-r-St)) diblock copolymers were prepared by living radical polymerization mediated by 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl. The former copolymer had a molecular weight of Mn[P(AS-r-HBS-r-VPh)-b-PSt] = 10,000-b-250,000 by ¹H NMR and a molar ratio of AS:HBS:VPh = 0.01:0.01:0.98, while the latter had a molecular weight of Mn[PVPh-b-P(AS-r-HBS-r-St)] = 10,000-b-111,000 and a molar ratio of AS:HBS:St = 0.02:0.03:0.95. The copolymers showed no self-assembly in 1,4-dioxane because this solvent was non-selective to the copolymers. Dynamic light scattering demonstrated that the copolymers formed micelles in the solvent in the presence of α,ω-diamine. The hydrodynamic radii of the micelles slightly increased with the copolymer concentration decrease, while the aggregation numbers were almost independent of the copolymer concentration. It was found that P(AS-r-HBS-r-VPh)-b-PSt formed smaller micelles with a lower aggregation number than PVPh-b-P(AS-r-HBS-r-St) because of the steric hindrance of the AS and HBS units present at the micellar coronas.     

Synthesis and aggregation behaviour of amphiphilic block copolymers with random middle block

The effect of microstructure on the aggregation behaviour of symmetrical di- and triblock copolymers P(BMA)-b-P(MAA) and P(BMA)-b-P(BMA-co-MAA)-b-P(MAA) with a molecular weight of 40,000 g/mol was studied. The critical micelle concentration, hydrodynamic radius and morphology of the micelles were determined by fluorescence spectroscopy, dynamic light scattering and scanning force microscopy (SFM). Whereas no effect of the microstructure on the critical micelle concentration could be detected, the hydrodynamic radius decreased from di- to triblock copolymer from 53 to 36 nm. The decrease of about 32% corresponds to the length of the random middle block within the triblock copolymer so that the reduction in hydrodynamic radius was caused by a complete orientation of the random middle block at the core corona interface. Finally, the SFM investigation showed that dehydration of micelles on a substrate is accompanied by formation of a physisorbed monolayer with a thickness of 2 nm on which the micelles are deposited.     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.     

Synthesis and self-assembly behaviors of four-armed amphiphilic polystyrene-b-poly(N-isopropylacrylamide) copolymers

Four-armed amphiphilic block copolymers polystyrene-b-poly(N-isopropyl acrylamide) (PSt-b-PNIPAAM)₄ were synthesized by atom transfer radical polymerization (ATRP) in two steps. Star narrow dispersed polystyrene, (PSt-Br)₄, with controlled number-average molecular weight was firstly synthesized by ATRP of styrene (St) using pentaerythritol tetrakis (2-bromoisobutyrate) (4Bri-Bu) as four-armed initiator. Then, (PSt-b-PNIPAAM)₄ was prepared using (PSt-Br)₄ as macroinitiator by ATRP. The structures of (PSt-Br)₄ and (PSt-b-PNIPAAM)₄ were confirmed by characterization by nuclear magnetic resonance (¹H NMR). The apparent viscosity of the four-armed (PSt-b-PNIPAAM)₄ was significantly lower than that of the linear PSt-b-PNIPAAM with the same amount of repeat units of PSt and PNIPAAM. The self-assembly behavior of the four-armed amphiphilic block copolymers (PSt-b-PNIPAAM)₄ in mixed solution (DMF/H₂O) and the lower critical solution temperature (LCST) of the resulting micelles were investigated by scanning electron microscopy (SEM), dynamic light scattering (DLS) and UV-VIS spectroscopy. The results show that the size of the mono-dispersed spherical micelles decreased with the increment of the chain length of PNIPAAM in the block copolymers, while LCST increased.     

Polyion micelles with diphase-segregated core: electrostatic self-assembly of poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(4-vinylpyridium) and tetrakis (4-sulfonatophenyl) porphyrin in solution

The polyion micelles were prepared with poly(ethylene glycol)-block-poly(4-vinylpyridium) (PEG₁₁₄-b-P(4-VPH+)₃₅) and tetrakis (4-sulfonatophenyl) porphyrin (TPPS) in acid aqueous solution. Micellization was investigated by using a combination of static and dynamic laser scattering. UV–Vis spectroscopy revealed that the H- and J-type aggregates of TPPS were formed in the micellar core. Transmission electron microscopy studies of the polyion micelles show that the obtained polyion micelles take a diphase-segregated core, the polymer phase and the incompatible TPPS aggregates phase.     

Design and Development of D‒α‒Tocopheryl Polyethylene Glycol Succinate‒block‒Poly(ε-Caprolactone) (TPGS−b−PCL) Nanocarriers for Solubilization and Controlled Release of Paclitaxel

The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX). The conjugation of PCL to TPGS was hypothesized to increase the stability and the drug solubilization characteristics of TPGS micelles. TPGS-b-PCL copolymer with various PCL/TPGS ratios were synthesized via ring opening bulk polymerization of ε-caprolactone using TPGS, with different molecular weights of PEG (1–5 kDa), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using ¹H NMR, GPC, FTIR, XRD, and DSC. Assembly of block copolymers was achieved via the cosolvent evaporation method. The self-assembled structures were characterized for their size, polydispersity, and CMC using dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Only copolymers that consisted of TPGS with PEG molecular weights ≥ 2000 Da were able to self-assemble and form nanocarriers of ≤200 nm in diameter. Moreover, TPGS₂₀₀₀-b-PCL₄₀₀₀, TPGS₃₅₀₀-b-PCL₇₀₀₀, and TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micelles enhanced the aqueous solubility of PAX from 0.3 µg/mL up to 88.4 ug/mL in TPGS₅₀₀₀-b-PCL₁₅₀₀₀. Of the abovementioned micellar formulations, TPGS₅₀₀₀-b-PCL₁₅₀₀₀ showed the slowest in vitro release of PAX. Specifically, the PAX-loaded TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micellar formulation showed less than 10% drug release within the first 12 h, and around 36% cumulative drug release within 72 h compared to 61% and 100% PAX release, respectively, from the commercially available formulation (Ebetaxel^®) at the same time points. Our results point to a great potential for TPGS-b-PCL micelles to efficiently solubilize and control the release of PAX.     

Synthesis and self-assembly behaviors of well-defined poly(lauryl methacrylate)-block-poly[N-(2-methacryloylxyethyl)pyrrolidone] copolymers

A series of structurally controllable poly(lauryl methacrylate)-b-poly[N-(2-methacryloylxyethyl)pyrrolidone], PLMA-b-PNMP, diblock copolymers were synthesized by reversible addition–fragmentation chain transfer polymerization. The self-assembly behaviors of PLMA-b-PNMP in a selective solvent, tetrahydrofuran (THF), were studied by employing static light scattering, dynamic light scattering, and transmission electron microscopy in detail. The relationships between the aggregation parameters, such as critical micelle concentration and the aggregation number (N _agg), and the molecular structure were established. It was found that spherical micelles can be formed once the solvophobic block length of poly[N-(2-methacryloylxyethyl)pyrrolidone] is larger than 215. Moreover, extremely small and monodisperse gold nanoparticles (<2 nm) were synthesized by employing PLMA-b-PNMP diblock copolymers in THF.     

Formation of gold nanoparticles in diblock copolymer micelles with various reducing agents

Gold nanoparticles (Au NPs) were prepared by the reduction of HAuCl₄ acid incorporated into the polar core of poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) copolymer micelles dissolved in toluene. The formation of Au NPs was controlled using three reducing agents with different strengths: hydrazine (HA), triethylsilane (TES), and potassium triethylborohydride (PTB). The formation of Au NPs was followed by transmission electron microscopy, UV–Vis spectroscopy, isothermal titration calorimetry (ITC), and dynamic light scattering (DLS). It was found that the strength of the reducing agent determined both the size and the rate of formation of the Au NPs. The average diameters of the Au NPs prepared by reduction with HA, TES, and PTB were 1.7, 2.6, and 8 nm, respectively. The reduction of Au(III) was rapid with HA and PTB. TES proved to be a mild reducing agent for the synthesis of Au NPs. DLS measurements demonstrated swelling of the PS-b-P2VP micelles due to the incorporation of HAuCl₄ and the reducing agents. The original micellar structure rearranged during the reduction with PTB. ITC measurements revealed that some chemical reactions besides Au NPs formation also occurred in the course of the reduction process. The enthalpy of formation of Au NPs in PS-b-P2VP micelles reduced by HA was determined.     

Secondary self-assembly behaviors of PEO-<Emphasis Type="Italic">b</Emphasis>-P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS triblock terpolymers in solution

A series of PEO₄₅-b-PtBA₅₃-b-PS _x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and ¹H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO₄₅-b-PtBA₅₃-b-PS _x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO₄₅-b-PtBA₅₃-b-PS₁₆₅, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO₄₅-b-PtBA₅₃-b-PS₄₂ vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO₄₅-b-PtBA₅₃-b-PS₁₆₅ vesicles tended to overlap with each other.     

Combination of living anionic polymerization and ATRP via ��click�� chemistry as a versatile route to multiple responsive triblock terpolymers and corresponding hydrogels

A combination of anionic polymerization, atom transfer radical polymerization (ATRP) and ??click?? chemistry was used to construct trishydrophilic ABC triblock terpolymers composed of a pH-sensitive A block, a water-soluble B block and two different thermo-sensitive C blocks without any block sequence limitation problems. First, an azido end-functionalized poly(2-vinylpyridine)-block-poly(ethylene oxide) (P2VP-b-PEO-N₃) diblock copolymer was synthesized by anionic polymerization. In a second step, poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) and poly(oligo(ethylene glycol) methacrylate) (POEGMA) were synthesized via ATRP using an alkyne functionalized initiator. The resulting polymers were attached to the P2VP-b-PEO-N₃ diblock copolymer using the 1,3-dipolar Huisgen cycloaddition (??click?? chemistry). For the ??click?? step, P2VP-b-PEO-N₃ diblock copolymers with either an azidoacetyl or a 2-azidoisobutyryl group were tested. In the latter case, however, a side reaction involving the cleavage of the formed ??click?? product via nucleophilic substitution occurred, preventing a permanent attachment of PDMAEMA or POEGMA to the P2VP-b-PEO-N₃ diblock copolymer. Finally, P2VP-b-PEO-b-POEGMA (with POEGMA=P(MEO₂MA-co-MEO_8.5MA)) and P2VP-b-PEO-b-PDMAEMA triblock terpolymers were successfully synthesized and used to construct stimuli-responsive hydrogels. A concentrated solution of P2VP₅₆-b-PEO₃₇₀-b-P[(MEO₂MA)₈₉-co-(MEO_8.5MA)₇] showed a gel?Csol?Cgel transition at pH?7 upon temperature increase, whereas in the case of P2VP₅₆-b-PEO₃₇₀-b-PDMAEMA₇₀, a gel?Csol or a weak gel?Cstrong gel transition was observed, depending on the applied pH. Finally, the addition of trivalent hexacyanocobaltate(III) ions to the P2VP₅₆-b-PEO₃₇₀-b-PDMAEMA₇₀ solution induced an upper critical solution temperature for the PDMAEMA block, which led to gel formation. This allows for the construction of light-sensitive hydrogels, utilizing the photo-aquation of hexacyanocobaltate(III) ions.