不同缓冲体系对毛细管电泳法分离15种核苷类化合物效果的比较

对毛细管电泳法分离15种核苷类化合物所用的不同缓冲液体系进行了系统比较,确定不同模式毛细管电泳法分析多种核苷类化合物的最适合背景缓冲液体系(BGE)。分别以四硼酸钠、磷酸氢二钠、乙酸钠、碳酸氢钠、乙酸铵和乙二胺(DEA)为背景电解质,对毛细管区带电泳(CZE)、毛细管电泳-电喷雾飞行时间质谱(CE-ESI-TOF/MS)以及胶束电动毛细管电泳(MEKC)3种模式进行比较,并对其中几种优势缓冲体系进行了优化。结果表明,CZE模式下使用四硼酸钠和磷酸氢二钠缓冲体系无法同时分离15种核苷类化合物,因此只适用于分析核苷类化合物数量较少的样品。而使用含有2%丙酮的300 mmol/L DEA能完全分开15种核苷类化合物,且分辨率和峰形良好。MEKC模式下,以25 mmol/L磷酸氢二钠(添加70 mmol/L十二烷基磺酸钠(SDS))为缓冲盐的分离结果最佳,并且此方法能成功应用于海洋生物海葵中核苷类化合物的分离。CE-ESI-TOF/MS分析中,以20 mmol/L乙酸铵(pH 10.0)为背景电解质,正离子模式检测,15种核苷类化合物的质谱信号均良好,检测灵敏度明显优于文献中报道的使用DEA缓冲体系的结果。本研究阐明了不同缓冲体系对15种核苷类化合物分离的适用性,为毛细管电泳技术在复杂基质中多种核苷类化合物的分离方法中的应用奠定了基础。     

离子液体修饰的杂化硅整体柱的制备及其电色谱性能

合成了含有烯丙基的离子液体氯化1-烯丙基-3-甲基咪唑(AMIMCl),采用自由基聚合反应将其固定到含有乙烯基的杂化硅整体柱表面,制备了离子液体修饰的杂化硅整体柱.在酸性环境下,利用该整体柱分离了核苷酸、酚类物质和苯甲酸类化合物,与未进行修饰的整体柱相比,离子液体修饰的杂化硅整体柱的电渗流反向,分离选择性明显提高,这可...     

氨基安替比林MIP-CEC整体柱的制备及电色谱性能研究

以氨基安替比林为模板分子,在内径100 μm的石英毛细管内采用原位聚合法制备了分子印迹毛细管整体柱,以电色谱模式分离了氨基安替比林及其结构类似物安替比林,在乙腈(体积分数15%)-磷酸二氢钠缓冲液(5 mmol/L)作为流动相(pH 7.0)条件下,18 min内完成分离,分离因子为1.37.考察了缓冲液中乙腈含量、pH值、离子强度对电渗流、溶质保留时间及分离因子的影响,探讨了整体柱识别机理.     

N-辛基-2-吡咯烷酮甲磺酸盐离子液体动态涂敷毛细管电泳分离碱性蛋白质

研究了新型吡咯烷酮类离子液体N-辛基-2-吡咯烷酮甲磺酸盐([NOP]~+CH_3SO~-_3)作为毛细管动态涂敷试剂时,对3种常见碱性蛋白质标准物质(溶菌酶、细胞色素c、α-胰凝乳蛋白酶原)的分离情况。系统考察了缓冲溶液类型、缓冲溶液p H值、离子液体添加剂浓度对分离效果的影响。结果表明,该动态涂敷方法简单快速,3种碱性蛋白质在8min内实现了高效分离,理论塔板数分别为2.9×10~5、5.8×10~5、1.8×10~4N/m。     

聚合离子液体为添加剂的毛细管电泳法用于快速高效分离饮料中7种有机酸

用一种聚合离子液体(聚1-乙烯基-3-丁基咪唑溴盐)为添加剂,以毛细管电泳法(CE)快速直接分离饮料中7种有机酸(丙二酸、酒石酸、抗坏血酸、反丁烯二酸、苯甲酸、山梨酸和柠檬酸)。详细考察了几种影响分离效果的条件,最佳背景电解质条件是125 mmol/L磷酸二氢钠缓冲液(pH 6.5)添加0.01 g/L聚合离子液体。7种分析物在4 min内能够快速高效分离(105000~636000 塔板/m),迁移时间的标准偏差(n=3)都不大于0.0213 min。7种分析物的检出限（以信噪比为3计）在0.001与0.05 g/L之间。这种方法被应用于一种美年达葡萄汁饮料中的有机酸检测。柠檬酸钠、苯甲酸和山梨酸被检测出,含量分别是2.64、0.10和0.08 g/L,其加标回收率分别为100.3%、100.7%和131.7%。该方法简单、快速、低廉,可以用作食品中有机酸添加剂的检测。     

毛细管电泳法测定阿霉素脂质体药物中的微量硫酸根离子

建立了以硝酸钾作为背景电解质测定阿霉素脂质体药物中微量硫酸根离子的毛细管电泳分析法。考察了分离电压、背景电解质、电渗流改性剂浓度、pH值对分离测定的影响。结果表明,当毛细管长度为60 cm(有效长度51.5 cm)、分离电压为~15 kV、缓冲溶液采用20 mmol/L硝酸钾(pH 7.0)、电渗流改性剂采用0.4 mmol/L十六烷基三甲基氯化铵(CTAC)、检测波长为202 nm时,阿霉素脂质体破乳液中硫酸根离子和氯离子在3 min内得到了基线分离,硫酸根离子迁移时间和峰面积的相对标准偏差分别小于0.01%和1.0%,检出限为5 μg/L。用该方法对阿霉素脂质体样品中的微量硫酸根离子进行了分析测定,结果令人满意。     

聚合离子液体毛细管气相色谱固定相的性能评价

离子液体作为毛细管气相色谱固定相的选择性和热稳定性是近年人们关注的课题。本文合成了1-烯基-3-苄基咪唑-二(三氟甲基磺酰)亚胺盐(VBIm-NTf2)离子液体并经毛细管柱内聚合制得了聚合离子液体PVBIm-NTf2色谱柱。与VBIm-NTf2色谱柱相比,PVBIm-NTf2色谱柱具有良好的色谱选择性和热稳定性。PVBIm-NTf2色谱柱对Grob试剂、醇混合物、酯混合物和苯系物等都表现了很好的分离能力,并且色谱峰峰形窄且对称。该聚合色谱柱在250 ℃下老化6 h后仍具有良好的分离能力和选择性。本文还测定了PVBIm-NTf2的Abraham溶剂化参数,解析了该固定相与溶质间的相互作用,相关研究国内尚未见报道。研究表明,对常规离子液体进行柱内聚合是改善常规离子液体气相色谱固定相的热稳定性和选择性的有效途径。     

金纳米微粒修饰毛细管电泳分离蛋白质的研究

报道了金纳米微粒(Au NP)修饰毛细管电泳分离蛋白质的方法.采用物理吸附法将Au NP修饰在熔融石英毛细管内表面,制备成Au NP修饰毛细管.探讨了修饰剂Au NP的浓度对电渗流及蛋白质分离的影响.结果表明,Au NP修饰的毛细管能有效地抑制电渗流及蛋白质在毛细管内壁上的吸附,提高分离效率.在优化的实验条件下,实现了...     

微乳毛细管电动色谱分析窗口的研究

研究了微乳毛细管电动色谱体系中,表面活性剂、助表面活性剂、微乳液的内相、有机改性剂等微乳组成对分析窗口的影响.以甲醇为电渗流标记物测定电渗流时间,以强疏水性化合物菲为标记物测定微乳液滴(假固定相)的迁移时间,分析时间窗口的变化.最佳条件下,菲的迁移时间和峰面积的相对标准偏差小于1.6%和3.0%(n=6),体系稳定,重复性良好.根据时间窗口的变化规律对其进行适当调节,成功实现了5种水溶性和2种脂溶性维生素的分离,并与毛细管区带电泳及胶束毛细管电动色谱进行了比较.     

毛细管电泳分离I^—和IO3^—中的电渗流的控制与调节

毛细管电泳分离是基于带电粒子在电场下的电动现象，当电场加到带电粒子所处的介质上时，存在电泳和电渗两种电动现象，其中电泳与带电粒子的大小、电荷和形状有关，而电渗与毛细管的表面及电泳介质的组成有关．由于电渗流能显著地影响分析时间和分离效率，因此，控制电渗流在毛细管电泳分离中是一个重要的环节［‘·‘j．此外，调节PH值、离子强度和缓冲液的粘度也是常用的控制电渗流的方法［’j．Ewing［‘与1入一个附加电场来控制电渗流．在缓冲液中加入足够浓度的阳离子表面活性剂将改变电渗流的方向．与通常的电渗流相比，人们对反向…     

Polymeric ionic liquid as a background electrolyte modifier enhancing the separation of inorganic anions by capillary electrophoresis

A novel and easy method for the separation of inorganic anions by capillary electrophoresis using a polymeric ionic liquid (PIL), poly(1-vinyl-3-butylimidazolium bromide) as a background electrolyte modifier has been developed. The PIL has been proved to generate a reversed electroosmotic flow which reduces the analysis time and improves the separation significantly. Effects of the PIL concentration and buffer composition (pH and concentration) were evaluated on basis of the resolution and efficiency of the sample. Under optimum conditions, good separation of six model inorganic anions was achieved with high efficiency and excellent reproducibility within 3 min. The results obtained indicate that the combination of reversed EOF and the association between the analytes and the PIL on the capillary wall or BGE play a prominent role in the separation of anions. Therefore, the PIL presents a useful alternative for the BGE modifier in the study of inorganic anions by CE.     

Polymeric ionic liquid as a dynamic coating additive for separation of basic proteins by capillary electrophoresis

A simple and economical capillary electrophoresis method has been developed for the analysis of four model basic proteins by employing a polymeric ionic liquid (PIL), poly(1-vinyl-3-butylimidazolium) bromide, as the dynamic coating additive. When a small amount of PIL was present in the background electrolyte, a cationic coating on the inner surface of fused-silica capillary was established. These PIL modified capillaries not only generated a stable reversed electroosmotic flow, but also effectively eliminated the wall adsorption of proteins. Several important parameters such as the PIL concentration in the background electrolyte, pH values and concentrations of the background electrolyte were optimized to improve the separation of basic proteins. Consequently, under the optimum conditions, a satisfied separation of basic proteins with peak efficiencies ranging from 247,000 to 540,000 (plates m⁻¹) had been accomplished within 11 min. The run-to-run RSDs (n = 3) of the migration times for the four basic proteins were all less than 0.37%.     

Polymeric ionic liquid-coated capillary for capillary electrophoresis

A new application of the polymeric ionic liquid (PIL) in capillary electrophoresis is reported. Poly(1-vinyl-3-butylimidazolium bromide) was physically adsorbed on silica capillary as the simple and effective coating for capillary electrophoresis (CE) analysis, in which the PIL is not present in the background electrolyte. The electroosmotic flow (EOF) of the PIL-coated capillary as compared with that of the bare fused-silica capillary shows a different dependence on electrolyte pH values. The EOF is reversed over a wide pH range from 3.0 to 9.0 and shows good repeatability. It is also found that the coated capillary has a good tolerance to some organic solvents, 0.1 M NaOH and 0.1 M HCl. The PIL-coated capillary has been employed in different areas. Both the basic proteins and anionic analytes can be well separated by PIL-coated capillaries in a fast and easy way. The PIL-coated capillary is also able to separate organic acid additives in a grape juice. The results showed that this type of coating provides an alternative to the CE separation of anions and basic proteins.     

Separation and Determination of Amino Acids by CE Using 1-Butyl-3-methylimidazolium-Based Ionic Liquid as Background Electrolyte

Capillary electrophoresis using 1-butyl-3-methylimidazolium tetrafluoroborate as background electrolyte for the separation and determination of 11 amino acids was studied. Several parameters, such as ionic liquid concentration, pH of background electrolyte and applied voltage, were optimized. Amino acids were derived with Sanger’s reagent (2,4-dinitrofluorobenzene) and the detection was performed by an ultraviolet absorption detector at 360 nm. Under selected conditions, 11 amino acids were completely separated within 16 min. The RSD values of integrated areas and migration times are <3.03 and <1.64%, respectively. The electroosmotic flow can be influenced by imidazolium cation, and the association between the imidazolium cation and the derived amino acids plays an important role in the separation mechanism. This method not only provides an approach for the separation and determination of amino acids, but is also an extension of the ionic liquid application to capillary electrophoresis.     

Polymeric ionic liquid as additive for the high speed and efficient separation of aromatic acids by co-electroosmotic capillary electrophoresis

A simple and reliable co-electroosmotic capillary electrophoresis system for the fast determination of aromatic acids has been developed by employing poly (1-vinyl-3-butylimidazolium bromide) as the background electrolyte modifier. The polymeric ionic liquid was synthesized by the conventional radical polymerization. The reversed electroosmotic flow was obtained by adding a small amount of the polymeric ionic liquid (0.0006%, w/v) to the electrolyte. To further improve the resolution of aromatic acids, conditions including the concentration of polymeric ionic liquid and pH of background electrolytes were optimized. All eight aromatic acids were baseline resolved in one measurement in a short time (less than 3.5 min) under optimized conditions, 100 mM NaH₂PO₄ buffer containing 0.006% (w/v) polymeric ionic liquid, pH 6.0. Separation efficiencies were in the range from 355,000 to 943,000 (plates/m). Satisfactory reproducibility on the basis of the migration time of analytes was achieved. RSDs (n = 3) were less than 0.33% except the p-aminobenzoic acid (0.9%). The applicability of the present method has been demonstrated for the determination of water-soluble aromatic acids in a common drug for external use.     

β‐cyclodextrin‐ionic liquid polymer based dynamically coating for simultaneous determination of tetracyclines by capillary electrophoresis

Tetracyclines are a group of broad spectrum antibiotics widely used in animal husbandry to prevent and treat diseases. However, the improper use of tetracyclines may result in the presence of their residues in animal tissues or waste. Recently, great attention has been drawn towards the green solvents ionic liquids. Ionic liquids have been employed as a coating material to modify the electroosmotic flow in capillary electrophoresis. In this study, a functionalized ionic liquid, mono‐6‐deoxy‐6‐(3‐methylimidazolium)‐β‐cyclodextrin tosylate, was synthesized and used for the simultaneous separation and quantification of tetracyclines by capillary electrophoresis. Good separation efficiency could be achieved due to the multiple functions of β‐cyclodextrin derived ionic liquid, including the electrostatic interaction, the hydrogen bonding, and the cavity structure in β‐cyclodextrin ionic liquid which can entrap the tetracyclines to form inclusion complex. After optimization, baseline separation achieved in 25 min with the running buffer consisted of 10 mmol/L, pH 7.2 phosphate buffer and 20 mmol/L β‐cyclodextrin ionic liquid. The satisfied result demonstrated that the β‐cyclodextrin ionic liquid is an ideal background electrolyte modifier in the separation of tetracyclines with high stability and good reproducibility. And it is an effective strategy to design and synthesize specific ILs as additive applied in separation.     

电解质溶液组成对低分子量阴离子毛细管电泳分离的影响

研究了毛细管电泳间接紫外检测法测定低分子量阴离子时电解质溶液中背景电解质、电渗流改性剂、ｐＨ值、有机溶剂等对分离的影响；比较了铬酸根、邻苯二甲酸根、苯甲酸根３种背景离子对不同迁移率阴离子分离的影响，并对间接紫外检测的定量基础及灵敏度进行了讨论；考察了３种不同长链烷基三甲基季铵盐电渗流改性剂浓度对阴离子迁移时间和电渗迁移率的影响，结果表明电渗流的改性效果与烷基链的长度有关；ｐＨ影响阴离子的有效迁移率     

Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Determination of nucleosides in natural Cordyceps sinensis and cultured Cordyceps mycelia by capillary electrophoresis

Cordyceps sinensis is a well-known traditional Chinese medicine, and some of the active components are nucleosides. The analysis of nucleosides in Cordyceps material has been performed by reversed-phase high-performance liquid chromatography (HPLC) with gradient elution or by spectrometry. Here, we have explored the possibility of using capillary electrophoresis to determine the content of three major nucleosides (adenosine, guanosine and uridine) in Cordyceps. Capillary electrophoresis needs no gradients, and it provides a better separation due to its higher efficiency. In order to optimize the resolution, the separation of adenosine, guanosine and uridine was determined in Cordyceps with respect to the variation of buffer concentration, pH, temperature, and voltage. By using the calibrated electrophoresis system, the separation was achieved for the three nucleosides in less than 10 min with a background electrolyte consisting of 0.2 M boric acid-sodium hydroxide buffer, pH 8.5. The nucleoside contents of various types of natural Cordyceps and cultured Cordyceps mycelia were determined and compared. There was a great variation of nucleoside content in different sources of Cordyceps; the cultured Cordyceps mycelia, however, contains a much higher concentration than the natural Cordyceps.