孪尾疏水缔合三元共聚物的粘度行为:水解度的影响

以十二烷基硫酸钠(SDS)为表面活性剂,利用氧化还原体系、采用前加碱共聚-共水解的方法制备了孪尾疏水缔合水溶性三元共聚物聚(丙烯酰胺／丙烯酸钠／N,N-二己基丙烯酰胺)[P(AM/NaAA／DiC6AM)],研究了P(AM／NaAA／DiC6AM)稀溶液及亚浓溶液的性能。随理论水解度的增加,P(AM／NaAA／DiC6AM)水溶液的特性粘数[η]增加,Huggins常数KH减小。P(AM／NaAA／DiC6AM)水溶液的表现粘度随理论水解度的增加而增加,随温度、剪切速率的增加而降低,随剪切速率的增加开始时降低较快而后变化较小。P(AM／NaAA/DiC6AM)在盐溶液中随NaCl、CaCl2质量浓度的增加,出现盐增粘现象;理论水解度不同的P(AM／NaAA／DiC6AM)与SDS水溶液的表现粘度在wSDS=0．050～0．400g／L范围内随SDS质量浓度的变化差别不大。     

孪尾疏水缔合水溶性共聚物聚(丙烯酰胺/丙烯酸钠/N,N-二己基丙烯酰胺)/十二烷基硫酸钠水溶液的粘度行为

水溶性三元共聚物;孪尾疏水缔合水溶性共聚物聚(丙烯酰胺/丙烯酸钠/N;N-二己基丙烯酰胺)/十二烷基硫酸钠水溶液的粘度行为     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

表面活性剂对海藻酸钠稀水溶液剪切粘度的影响

通过粘度法考察了不同pH值时, 阴离子聚电解质海藻酸钠(NaAlg)与阴离子表面活性剂十二烷基硫酸钠(SDS)、阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、非离子表面活性剂辛基酚聚氧乙烯醚(TritonX-100)以及它们的复配体系的相互作用. 研究表明, 在酸性条件下, SDS和TritonX-100与NaAlg之间主要是疏水作用, 随着表面活性剂浓度的增加, 体系粘度下降直到基本不变, CTAB与NaAlg主要发生静电作用和疏水作用, 体系粘度随CTAB浓度的增加呈现先上升后下降的趋势. 在实验条件下, TritonX-100浓度为0.05 mmol·L-1时, SDS的加入, 使得NaAlg/TritonX-100体系的零剪切粘度下降, 而CTAB的加入, 在pH=3.0和5.0时, NaAlg/TritonX-100体系的零剪切粘度出现上升, 在pH=6.4时, 该体系零剪切粘度下降.     

The Interaction Between N–Isopropylacrylamide-Acrylic Acid-Ethyl Methacrylate Thermosensitive Polymers and Cationic Surfactants

The interaction between cationic surfactants and isopropylacrylamide-acrylic acid-ethyl methacrylate (IPA:AA:EMA) terpolymers has been investigated using steady-state fluorescence and spectrophotometric measurements to assess the effect of the polymer composition on the aggregation process and terpolymers’ thermosensitivities. Micropolarity studies using pyrene show that the interaction of cationic surfactants with IPA:AA:EMA terpolymers occurs at surfactant concentrations much smaller than that observed for the pure surfactant in aqueous solution. The critical aggregation concentration (CAC) values decrease with both the hydrocarbon length of the surfactant and the content of ethyl methacrylate. These results were interpreted as a manifestation of the increasing contribution of attractive hydrophobic and electrostatic forces between negatively charged polymer chains and positively charged surfactant molecules. The increase of ethyl methacrylate in the copolymers lowers the CAC due to the larger hydrophobic character of the polymer backbone. The cloud point determination reveals that the lower critical solution temperatures (LCST) depend strongly on the copolymer composition and surfactant nature. The binding of surfactants molecules to the polymer chain screens the electrostatic repulsion between the carboxylic groups inducing a conformational transition and the dehydration of the polymer chain.     

疏水缔合(丙烯酰胺十六烷基二甲基烯丙基氯化铵-2-丙烯酰胺基-2-甲基丙磺酸)三元共聚物的合成与性能研究

疏水缔合水溶性聚合物是指在聚合物亲水性大分子链上引入少量疏水基团的一类水溶性聚合物[1～5].在水溶液中,疏水基团之间由于憎水作用而发生聚集,使大分子链产生分子内与分子之间缔合.在临界缔合浓度以上,以分子间缔合为主,增大了流体力学体积,因此,具有较好的增粘作用.疏水基的加入可大幅度地改变聚合物的流变性能.在聚合物驱油中的流度控制,提高波及效率、以及调剖中起到非常重要的作用.     

Influence of ionic charges on the bilayers of lamellar phases

The influence of ionic charges on the mesophases in the ternary system of C(12-16)E(6) (LA 070), ethylhexylglycerid (EHG), and water was studied. The charge was introduced by adding the ionic surfactant SDS (sodium dodecyl sulfate). The single lamellar phase (5 wt % LA 070 and 240 mM EHG in water) yields a bluish homogeneous solution. With the addition of SDS, the samples become more and more clear. Rheology measurements indicate that increased charge density increases the storage modulus G', and the lamellar phases show typical behavior of a viscoelastic fluid with a yield stress at higher SDS concentration. SAXS measurements show that the interlamellar distance D decreases with SDS concentration. The addition of ionic surfactants suppresses the Helfrich undulations, flattens the bilayers, and decreases interbilayer spacing due to electrostatic repulsions of the ionic surfactant head groups. Furthermore, the L(alpha) phase transforms into vesicle phases as the SDS concentration is increased. Second, it is shown that with added NaCl electrolyte the phase with charged surfactant behaves again in the same way as the initial uncharged system. The addition of salt screens the electrostatic interaction, which leads to a higher flexibility of the bilayers and a decrease of the storage modulus G'. Theoretical calculations show that the shear moduli of the L(alpha) phases are much smaller than the osmotic pressure of the systems. Several models are proposed for the explanation of the shear moduli. The model due to Lekkerkerker for the electric contribution of the bending constant of the bilayer seems to yield good results for the transition to vesicles.     

Variegated micelle surfaces: correlating the microstructure of mixed surfactant micelles with bulk solution properties

Electron paramagnetic resonance, viscosity, and small-angle neutron scattering (SANS) measurements have been used to study the interaction of mixed anionic/nonionic surfactant micelles with the polyampholytic protein gelatin. Sodium dodecyl sulfate (SDS) and the nonionic surfactant dodecylmalono-bis-N-methylglucamide (C12BNMG) were chosen as "interacting" and "noninteracting" surfactants, respectively; SDS micelles bind strongly to gelatin but C12BNMG micelles do not. Further, the two surfactants interact synergistically in the absence of the gelatin. The effects of total surfactant concentration and surfactant mole fraction have been investigated. Previous work (Griffiths et al. Langmuir 2000, 16 (26), 9983-9990) has shown that above a critical solution mole fraction, mixed micelles bind to gelatin. This critical mole fraction corresponds to a micelle surface that has no displaceable water (Griffiths et al. J. Phys. Chem. B 2001, 105 (31), 7465). On binding of the mixed micelle, the bulk solution viscosity increases, with the viscosity-surfactant concentration behavior being strongly dependent on the solution surfactant mole fraction. The viscosity at a stoichiometry of approximately one micelle per gelatin molecule observed in SDS-rich mixtures scales with the surface area of the micelle occupied by the interacting surfactant, SDS. Below the critical solution mole fraction, there is no significant increase in viscosity with increasing surfactant concentration. Further, the SANS behavior of the gelatin/mixed surfactant systems below the critical micelle mole fraction can be described as a simple summation of those arising from the separate gelatin and binary mixed surfactant micelles. By contrast, for systems above the critical micelle mole fraction, the SANS data cannot be described by such a simple approach. No signature from any unperturbed gelatin could be detected in the gelatin/mixed surfactant system. The gelatin scattering is very similar in form to the surfactant scattering, confirming the widely accepted picture that the polymer "wraps" around the micelle surface. The gelatin scattering in the presence of deuterated surfactants is insensitive to the micelle composition provided the composition is above the critical value, suggesting that the viscosity enhancement observed arises from the number and strength of the micelle-polymer contact points rather than the gelatin conformation per se.     

Shear and extensional rheology of solutions of mixtures of poly(ethylene oxide) and anionic surfactants in ionic environments

Interactions between a high molecular weight poly(ethylene oxide) (PEO) and the anionic surfactant sodium dodecyl benzene sulfonate (SDBS) in aqueous solutions were investigated by shear and extensional rheometry. Results for mixtures between PEO and sodium dodecyl sulfate (SDS) are also presented for comparison purposes. Addition of anionic surfactants to PEO solutions above the critical aggregation concentration (CAC), at which micellar aggregates attach to the polymer chain, results in an increase in shear viscosity due to PEO coil expansion, and a strengthening of interchain interactions. In extensional flows, these interactions result in a decrease of the critical shear rate for the onset of the characteristic extension thickening of the PEO solutions that is due to transient entanglements of polymer molecules. The relaxation times associated with these transient entanglements are not directly proportional to the shear viscosity of the solutions, but rather vary more rapidly with surfactant concentration. In the presence of an electrolyte, coil contraction results in lower shear viscosities and a decrease in the extension thickening effects at surfactant concentrations just beyond the CAC. The relaxation times associated with transient entanglement reach a minimum at the same surfactant concentration as the shear viscosity, which indicates that coil contraction is responsible for the observed effects in both types of flow. However, the increase in extensional-flow entanglement relaxation times is much more abrupt than the decrease in shear viscosity. All these results point to a greater sensitivity of extensional flows on the molecular conformation of PEO/surfactant complexes.     

Effect of added poly(oxyethylene)dodecyl ether on the phase and rheological behavior of wormlike micelles in aqueous SDS solutions

Upon the addition of a short EO chain nonionic surfactant, poly(oxyethylene) dodecyl ether (C12EOn), to dilute micellar solution of sodium dodecyl sulfate (SDS) above a particular concentration, a sharp increase in viscosity occurs and a highly viscoelastic micellar solution is formed. The oscillatory-shear rheological behavior of the viscoselastic solutions can be described by the Maxwell model at low shear frequency and combined Maxwell-Rouse model at high shear frequency. This property is typical of wormlike micelles entangled to form a transient network. It is found that when C12EO4 in the mixed system is replaced by C12EO3 the micellar growth occurs more effectively. However, with the further decrease in EO chain length, phase separation occurs before a viscoelastic solution is formed. As a result, the maximum zero-shear viscosity is observed at an appropriate mixing fraction of surfactant in the SDS-C12EO3 system. We also investigated the micellar growth in the mixed surfactant systems by means of small-angle X-ray scattering (SAXS). It was found from the SAXS data that the one-dimensional growth of micelles was obtained in all the SDS-C12EOn (n=0-4) aqueous solutions. In a short EO chain C12EOn system, the micelles grow faster at a low mixing fraction of nonionic surfactant.     

Characterization,solution properties,and morphologies of a hydrophobically associating cationic terpolymer

The acrylamide‐based terpolymers (PADB) with 4‐butylstyrene (BST) as the hydrophobic monomer and dimethyldiallyammonium chloride (DMDAAC) were synthesized by the micellar free radical technique. The polymer was determined by UV, FT‐IR and ¹HNMR, and the hydrophobic microblock structure of PADB was characterized successfully by the conventional DSC measurement. The use of DMDAAC improves the water solubility and intermolecular association of terpolymers. The feed amount of BST affects greatly the apparent viscosity of PADB solution. The polymer exhibits good viscosification property, salt resistance, temperature‐thickening, thixotropy, pseudoplastic behavior and shear‐thickening at low shear rate. The apparent viscosities of PADB solution remarkably increase by the addition of a small amount of surfactant. AFM measurements show that hydrophobic aggregates have been formed in 0.1 g dL^?1 PADB aqueous solution, indicative of strong associations of hydrophobic groups, which are reinforced with increasing PADB concentration. The microstructures of PADB are disrupted by the addition of small amounts of salt, resulting in the decrease in solution viscosity. However, with increasing NaCl concentration, the tree‐like associating structures are formed, leading to the increase in the solution viscosity of PADB. The AFM results reveal that the solution properties of PADB are due to the associating structures in the aqueous solution and brine solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 826–839, 2007     

The role of the surfactant head group in the emulsification process: binary (nonionic-ionic) surfactant mixtures

Dilute emulsions of dodecane in water were prepared under constant flow rate conditions with binary surfactant systems. The droplet size distribution was measured as a function of the mixed surfactant composition in solution. The systems studied were (a) the mixture of anionic sodium dodecyl sulfate (SDS) with nonionic hexa(ethyleneglycol) mono n-dodecylether (C12E6) and (b) the mixture of cationic dodecyl pyridinium chloride (DPC) with C12E6. At a constant concentration of SDS or DPC surfactant in solution (below the CMC) the mean emulsion droplet size decreases with the increase in the amount of C12E6 added to the solution. However, a sharp break of this droplet size occurs at a critical concentration and beyond this point the mean droplet size did not significantly change upon further increase of the C12E6. This point was found to corresponded to the CMC of the mixed surfactant systems (as previously determined from microcalorimetry measurements) and this result suggested the mixed adsorption layer on the emulsion droplet was similar to the surfactant composition on the mixed micelles. The emulsion droplet size as a function of composition at the interface was also studied. The mean emulsion droplet size in SDS-C12E6 solution was found to be lower than that in DPC-C12E6 system at the equivalent mole fraction of ionic surfactant at interface. This was explained by the stronger interactions between sulphate and polyoxyethylene head groups at the interface, which facilitate the droplet break-up. Counterion binding parameter (beta) was also determined from zeta-potential of dodecane droplets under the same conditions and it was found that (beta) was independent of the type of the head group and the mole fraction of ionic surfactant at interface.     

Electrophoretic separations in poly(dimethylsiloxane) microchips using a mixture of ionic and zwitterionic surfactants

The use of mixtures of ionic and zwitterionic surfactants in poly(dimethylsiloxane) (PDMS) microchips is reported. The effect of surfactant concentration on electroosmotic flow (EOF) was studied for a single anionic surfactant (sodium dodecyl sulfate, SDS), a single zwitterionic surfactant (N-tetradecylammonium-N,N-dimethyl-3-ammonio-1-propanesulfonate, TDAPS), and a mixed SDS/TDAPS surfactant system. SDS increased the EOF as reported previously while TDAPS showed an initial increase in EOF followed by a reduction at higher concentrations. When TDAPS was added to a solution containing SDS, the EOF decreased in a concentration-dependent manner. The EOF for all three surfactant systems followed expected pH trends, with increasing EOF at higher pH. The mixed surfactant system allowed tuning of the EOF across a range of pH and concentration conditions. After establishing the EOF behavior, the adsorption/desorption kinetics were measured and showed a slower adsorption/desorption rate for TDAPS than SDS. Finally, the separation and electrochemical detection of model catecholamines in buffer and reduced glutathione in red blood cell lysate using the mixed surfactant system were explored. The mixed surfactant system provided shorter analysis times and/or improved resolution when compared to the single surfactant systems.     

Interaction between zwitterionic and anionic surfactants: spontaneous formation of zwitanionic vesicles

The physicochemical properties, such as critical micelle concentration (cmc), surface tension at cmc (γ(cmc)), and surface activity parameters of the mixtures of a new amino acid-based zwitterionic surfactant, N-(n-dodecyl-2-aminoethanoyl)-glycine (C(12)Gly) and an anionic surfactant, sodium dodecyl sulfate (SDS) at different molar fractions, X(1) (= [C(12)Gly]/([C(12)Gly] + [SDS])) of C(12)Gly were studied. A synergistic interaction was observed between the surfactants in mixtures of different X(1). The self-organization of the mixtures at different molar fractions, concentrations, and pH was investigated. Fluorescence depolarization studies in combination with dynamic light scattering, and transmission electron microscopic and confocal fluorescence microscopic images suggested the formation of bilayer vesicles in dilute solutions of SDS rich mixtures with X(1) ≤ 0.17 in the pH range 7.0 to 9.0. However, the electronic micrographs showed structures with fingerprint-like texture in moderately dilute to concentrated C(12)Gly/SDS mixture at X(1) = 0.50. The vesicles were observed to transform into small micelles upon lowering the solution pH and upon increase of total surfactant concentration in mixtures with X(1) ≤ 0.17. However, decrease of SDS content transformed vesicles into wormlike micelles. The structural transitions were correlated with bulk viscosity of the binary mixtures.     

Water-soluble polymers. 71. pH responsive behavior of terpolymers of sodium acrylate,acrylamide, and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio)butanoate

Terpolymers of sodium acrylate (NaA), acrylamide (AM), and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio) butanoate (AMPDAB) were prepared by the free radical polymerization in 0.5M NaBr aqueous solution using potassium persulfate as the initiator. The feed ratio of AMPDAB : NaA : AM was varied from 5 : 5 : 90 to 40 : 40 : 20 mol %, with the total monomer concentration held constant at 0.45M. Terpolymer compositions were determined by ¹³C NMR. Molecular weights varied from 3.0 × 10⁵ to 9.7 × 10⁶ g/mol. All terpolymers were soluble in deionized water and salt solutions at all pH values. The dilute and semidilute solution behavior of the terpolymers was studied as a function of composition, pH, and added electrolytes. Polyelectrolyte behavior was observed for all terpolymers at pH 8.5, as evidenced by high viscosity values at low polymer concentrations and viscosity decrease in the presence of added electrolytes. The reduced viscosity as a function of decreasing pH exhibits a minimum as the terpolymer undergoes a polyanion/polyzwitterion/polycation transition. Comparison of the solution behavior of the terpolymers to terpolymers of 3-(2-acrylamido-2-methylpropane dimethylammonio)-1-propane sulfonate (AMPDAPS), AM, and NaA (AADAPS series) as well as copolymers of AMPDAB and AM (AMPDAB series) have been made. © 1997 John Wiley & Sons, Inc.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the air-water interface

The adsorption of the surface-active protein hydrophobin, HFBII, and the competitive adsorption of HFBII with the cationic, anionic, and nonionic surfactants hexadecyltrimethylammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), has been studied using neutron reflectivity, NR. HFBII adsorbs strongly at the air-water interface to form a dense monolayer ～30 ? thick, with a mean area per molecule of ～400 ?(2) and a volume fraction of ～0.7, for concentrations greater than 0.01 g/L, and the adsorption is independent of the solution pH. In competition with the conventional surfactants CTAB, SDS, and C(12)E(6) at pH 7, the HFBII adsorption totally dominates the surface for surfactant concentrations less than the critical micellar concentration, cmc. Above the cmc of the conventional surfactants, HFBII is displaced by the surfactant (CTAB, SDS, or C(12)E(6)). For C(12)E(6) this displacement is only partial, and some HFBII remains at the surface for concentrations greater than the C(12)E(6) cmc. At low pH (pH 3) the patterns of adsorption for HFBII/SDS and HFBII/C(12)E(6) are different. At concentrations just below the surfactant cmc there is now mixed HFBII/surfactant adsorption for both SDS and C(12)E(6). For the HFBII/SDS mixture the structure of the adsorbed layer is more complex in the region immediately below the SDS cmc, resulting from the HFBII/SDS complex formation at the interface.     

血红蛋白生物催化合成导电聚苯胺

利用血红蛋白在十二烷基磺酸钠阴离子表面活性剂胶束体系中生物催化合成水溶性导电聚苯胺/十二烷基磺酸复合物(PANI/SDS), 讨论了不同反应体系及溶液pH值对聚合反应产物的影响. 结果表明该反应具有明显的pH值依赖性, pH (1.0～4.0)是合成导电聚苯胺所必需的, 其最适pH值为3.0, 聚苯胺由导电的翠绿亚胺盐转变为本征态发生在pH 10.4. 用元素分析法、紫外-可见分光光度法、FT-IR、循环伏安法、粘度测试、电导率测试、热重分析法等对PANI/SDS复合物表征, 结果表明该复合物具有较好的热稳定性和可逆的电化学活性.     

Influence of the polyelectrolyte poly(ethyleneimine) on the adsorption of surfactant mixtures of sodium dodecyl sulfate and monododecyl hexaethylene glycol at the air-solution interface

The polyelectrolyte poly(ethylenenimine), PEI, is shown to strongly influence the adsorption of the anionic-nonionic surfactant mixture of sodium dodecyl sulfate, SDS, and monododecyl hexaethylene glycol, C(12)E(6), at the air-solution interface. In the presence of PEI, the partitioning of the mixed surfactants to the interface is highly pH-dependent. The adsorption is more strongly biased to the SDS as the pH increases, as the PEI becomes a weaker polyelectrolyte. At surfactant concentrations >10(-4) M, the strong interaction and adsorption result in multilayer formation at the interface, and this covers a more extensive range of surfactant concentrations at higher pH values. The results are consistent with a strong interaction between SDS and PEI at the surface that is not predominantly electrostatic in origin. It provides an attractive route to selectively manipulate the adsorption and composition of surfactant mixtures at interfaces.     

水溶性疏水缔合型聚(丙烯酰胺-丙烯酸十六酯)溶液性质的研究

采用沉淀聚合法制备水溶性的丙烯酰胺－丙烯酸十六疏水缔合型共聚物,研究了共聚物水溶液的性质及其影响因素。随着疏水基团含量增加,共聚物在纯水中及NaCl溶液中的特性粘数[η]均减小,疏水基团临界缔合浓度降低。共聚物溶液浓度高于监界缔合浓度时,溶液表现粘度急剧增加,表明溶液中分子间缔合大量形成。     

Phase behavior and rheological properties of enzymatically synthesized trehalose decanoate aqueous solutions

Surface tension properties of an enzymatically synthesized equimolar mixture of trehalose mono- and didecanoate in aqueous solutions have been determined. At 20 degrees C a critical micellar concentration (CMC) of 50 micromol/l and a minimal surface tension of 28 mN/m have been obtained. Above the CMC, it has been shown that up to a concentration of 42 wt%, and in a 20-60 degrees C temperature range the sugar ester aqueous solutions do not form any crystalline structure, nor present any phase transition, and the trehalose decanoate molecules form an isotropic worm-like micellar phase. The rheological properties indicate however a more complicated picture in the same concentration and temperature ranges. In steady shear, the viscosity of the trehalose decanoate solutions do not exhibit any shear rate dependence from 1 to 100 s(-1) for concentrations up to 42 wt%. Below 0.8 wt%, the viscosity remains constant and close to that of water; then, between 0.8 and 23 wt%, the viscosity shows a quadratic increase with surfactant concentration. For higher concentrations, up to 42 wt%, no further significant increase in viscosity is observed. In oscillatory shear experiments, the solutions exhibit viscoelastic properties. The observed rheological behavior as a function of concentration and temperature may be due to a progressive evolution of the trehalose decanoate molecular associations: as the concentration increases, the system evolves towards an entangled and/or partially branched or cross-linked micellar network, and eventually a multiconnected network of cross-linked micelles.