Urea-based polyacetylenes as an optical sensor for fluoride ions

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4-nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F-, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl-, HSO4-, Br-, and NO3-, indicating the F- sensing ability of poly(1) and poly(2). The 1H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F- interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F- binding ability, and the Hill coefficient in the poly(1)/F- complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F- was based on a positive homotropic allosterism.     

POLYMERIZATION OF 1-OCTENE AND DETERMINATION OF MARKHOUWINK CONSTANTS OF POLY(1-OCTENE)

The polymerization of 1-octene initiated by methylalumoxane(MAO)-activated Ni(Ⅱ)-based-α-diimine complexes[(2,6-i-Pr)_2C_6H_3-DAB(An)]NiBr_2 was investigated.Using this catalyst,poly(1-octene)s with molecular weight between 100×10~3 and 400×10~3 and polydispersity(M_w/M_n) between 1.3 and 1.5 were synthesized successfully by varying reaction time at room temperature.The poly(1-octene)s were amorphous polymers and could be well soluble in tetrahydrofuran(THF).After fractional precipitation,poly(1-octene)s...     

Direct synthesis of per(poly)fluoroalkylmethyl-substituted electrophilic cyclopropane derivatives

A convenient and direct per(poly)fluoroalkylmethyl-mtroducing cyclopropanation reaction was described. In the presence of CrCl3/Fe, per(poly)fluoroalkyl iodides reacted with diethyl allylmalonate and its analogs to give per(poly)fluoroalkylmethyl-substituted electrophilic cyclopropane derivatives in high yields. This reaction was considered to proceed by two steps: radical addition followed by cyclopropanation.     

IMMOBILIZED CIBACRON BLUE F3G—A ON CROSSLINKED POLY9VINYL ALCOHOL） FOR AFFINITY CHROMATOGRAPHY

Immobilized triazine dye affinity chromatography has been widely used for protein purification.In this paper,Cibacron Blue F3G-4 was immobilized,through a spacer arm,onto a rigid hydroplhilic porous polymer by reacting an epoxy-group-containing poly(vinyl alcohol)with 6-aminohexyl-N‘-Cibacron Blue F3G-A,which was obtained by reacting Cibacron Blue F3G-4 with excess of 1,6-diaminohexane,in a pH 8.6buffer,The epoxy-group-containing poly(vinyl alcohol)was prepared by treating macroporous poly(vinyl alcohol)with excess epichlorohydrin in the presence of NaOH in dimethyl sulfoxide.The macroporous poly(vinyl alcohol)was prepared by hydrolysis of macroporous crosslinked poly(vinyl acetate),which was synthesized by suspension copolymerization of vinyl acetate and triallyl isocyanurate in the presence of butyl acetate and n-heptane as diluents.The Cibacron Blue F3G-A-immobilized poly(vinyl alcohol)was packed in a stainless steel column (250×5mm I.D.)and the chromatographic behaviors of several proteins(cytochrome c, lysozyme,bovine serum albumin,insulin,and lactate dehydrogenase)were determined.     

THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride)—poly(methyl methacrylate) and chlorinated poly(vinyl chloride)—poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.     

PREPARATION AND CHARACTERIZATION OF SCHIFF BASE POLYMERS DERIVED FROM 4,4''''-METHYLENEBIS(CINNAMALDEHYDE)

New Schiff base polymers poly[4,4'-methylenebis(cinnamaldehyde)ethylenediimine] (PMBCen), poly[4,4'-methylenebis(cinnamaldehyde) 1,2-propylenediimine] (PMBCPn), poly[4,4'-methylenebis(cinnamaldehyde) 1,3-propylenediimine] (PMBCPR), poly[4,4'-methylenebis(cinnamaldehyde)l,2-phenylenediimine] (PMBCPh), poly[4,4'-methylene-bis(cinnamaldehyde)meso-stilbenediimine] (PMBCS), poly[4,4'-methylenebis(cinnamaldehyde)urea] (PMBCUR), poly[4,4'-methylenebis(cinnamaldehyde)semicarbazone] (PMBCSc), poly[4,4'-methylenebis(cinnamaldehyde)thiosemicarbazone] (PMBCTSc) and poly[4,4'-methylenebis(cinnamaldehyde)hydrazone] (PMBCH) were formed by polycondensation of 4,4'-methylenebis(cinnamaldehyde) with ethylenediamine, 1,2-propylenediamine, 1,3-propylenediamine, 1,2-phenylenediamine, meso-stilbenediamine, urea, semicarbazide, thiosemicarbazide and hydrazine, respectively. The dialdehyde and polymers have been characterized through elemental micro-analysis, IR, UV-Vis and 'H-NMR spectroscopic techniques. Thermoanalytical studies and viscous flow of dilute solutions of dialdehyde and its polymers have been examined and compared.     

Studies on Polymeric Crown Ethers (Ⅰ)——The Syntheses and Complexation Properties of Polymeric Thiacrown Ethers with Polyether Backbone

Four new polymeric oxa-thiacrown ethers were prepared by the intramolecular cy-clization of poly (2-chloroethylglycidyl ether) with dimercaptans, which is the most convenient method for synthesizing poly(thiacrownether)s. The poly(thiacrownether)s exhibited excellent complexation properties for noble metal ions such as Au ( Ⅲ ) , Pd ( Ⅱ ) and Ag( Ⅰ ) , except Pt( Ⅳ ). In addition, the XPS of polymeric thiacrown ether (PC3) and its complexes of Au( Ⅲ ) and Pd( Ⅱ ) were determined.     

THE EFFECTS OF MONOMER STRUCTURE OF CYCLIC KETENE ACETALS ON THE BEHAVIOR OF CONTROLLED RADICAL RING-OPENING POLYMERIZATION

Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4-phenyl-1,3-dioxolane (MPDO) and 4, 7-dimethyl-2-methylene-1, 3-dioxepane(DMMDO) were carried out in the presence ofethyl α-bromobutyrate/CuBr/2, 2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO)were characterized by ~1H and ~(13)C-NMR spectra. The effects of monomer structure on the behavior of atom transfer freeradical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-openingpolymerization was discussed.     

HYPERBRANCHED AROMATIC POLYMERS OBTAINED VIA SELF-CONDENSATION*

Hyperbranched aromatic polpmers were prepared by Friedel-Crafts reaction with Lewis acid, AlCl_3 and ZnCl_2, asthe catalysts. In this work, hyperbranched polybenzyl (PB) and poly(methylene) naphthalene(PN) were synthesized andcharacterized by ~1H-NMR and GPc. In addition, their florescence properties were measured with steady-state florescencespectra in THF and ethylene dichloride. The quantum yields of polybenzyl and poly(methylene)naphthalene in ethylenedichloride are much larger than those in THF.     

ELECTROCHEMICAL SYNTHESIS AND PROPERTIES OF POLY(AZURE B)*

A blue poly(azure B) film has been synthesized using repeated potential cycling between -0.25 and 1. 10 V (versusSCE). The electrolytic solution consisted of 2.5 mmol dm~(-3) azure B, 0.5 mol dm~(-3) NaCl and 0.2 mol dm~(-3) NaH_2PO_4 at the pHrange of 2.0 to 11.0. The in situ visible spectrum during electrolysis of azure B shows that the intensity at 740 nm peakincreases with increasing numbers of potential cycles, which is attributable to the formation of poly(azure B). Thewavelength of its corresponding absorption peak is 98 nm longer than that of azure B. The polymerization rate is stronglyaffected by pH values. The anodic peak potential and cathodic peak potential of the poly(azure B) in a solution of pH 3.0 arenot affected by increasing the scan rate from 25 to 600 mV s~(-1). Poly(azure B) has good electrochemical reversibility and fastcharge transfer characteristic in the pH range of 2.0 and 11.0. The conductivity of poly(azure B) is 1.5×10~(-4) S cm~(-1).According to the differences between FTIR spectra of poly(azure B) and azure B, an electrochemical polymerizationmechanism of azure B is proposed in this paper.     

Thermo-sensitive poly(DEGMMA-co-MEA) microgels: Synthesis,characterization and interfacial interaction with adsorbed protein layer

The novel microgels, poly[di(ethylene glycol) methyl ether methacrylate-co-2-methoxyethyl acrylate] poly(DEGMMA-co-MEA) microgels, were synthesized. The poly(DEGMMA-co-MEA) microgels were thermo-sensitive and exhibited a volume phase transitive temperature(VPTT) of 14–22 ?C. The incorporation of hydrophobic comonomer MEA shifted the VPTT of poly(DEGMMA-co-MEA) microgels to lower temperatures. The interfacial interaction of poly(DEGMMA-co-MEA) microgels and three model proteins, namely fibrinogen, bovine serum albumin and lysozyme, was investigated by quartz crystal microbalance(QCM). An injection sequence of "microgel-after-protein" was then established for the real-time study of the interaction of proteins and the microgels at their swollen and collapsed states by using QCM technique. The results indicated that the interfacial interaction of poly(DEGMMA-co-MEA) microgels and adsorbed protein layers was mainly determined by the electrostatic interaction. Because poly(DEGMMA-co-MEA) microgels were negatively charged in Tris-HCl buffer solution(p H = 7.4), the microgels did not adsorb on negatively charged fibrinogen and bovine serum albumin layers but strongly adsorbed on positively charged lysozyme layer. Stronger interaction between lysozyme and the microgels at collapsed state(i.e. at 37 ?C) was observed. Furthermore, the incorporation of MEA might weaken the interaction between poly(DEGMMA-co-MEA) microgels and proteins.     

THE EFFECT OF MODIFICATION OF COORDINATING GROUPS ON THE CATALYTIC BEHAVIORS OF POLYMER CATALYSTS

Several polymer-supported palladium complex catalysts containing two different coordinatinggroups were prepared and the cooperative effect of the coordinating groups on the catalytic behaviorsof polymer catalysts was studied. It was found that poly(acrylic acid-co-acrylonitrile)-Pd complex(PAA-AN-Pd) is a more active and stable catalyst for hydrogenation than both poly(acrylic acid)-Pd and poly(acrylonitrile)-Pd complexes. A marked change of catalytic behaviors of poly(N-substituted maleamic acid-co-styrene)-Pd complexes was observed in comparison with poly(maleicacid-co-styrene)-Pd complex. Acetophenone was reduced to 1-phenyl ethanol by poly(N-phenylmaleamic acid-Co-styrene)-Pd complex (N-1-Pd), but ethylbenzene was obtained using poly(maleicacid-co-styrene)-Pd complex as a catalyst. The influence of solvents, additives and N/Pd gramatomic ratio on the catalytic behaviors of the polymer complexes was investigated.     

Polymerization of (meth)acrylates with aluminum-based initiators

<正>A simple and effective way to prepare poly(acrylate)s,such as poly(methacrylate),poly(butyl acrylate) and poly(butyl methacrylate),has been achieved by using the single component aluminum-based compounds,such as modified methylaluminoxane(MMAO),triisobutylaluminium(TIBA) and triethylaluminium(TEA) as initiators.Effective initiations and high molecular weight polymers with unimodal molecular weight distributions could be easily obtained by varying the reaction parameters of systems under mild conditions.Although these aluminum compounds were inefficient initiators for methyl methacrylate(MMA) polymerization,they exhibited remarkable catalytic activity for butyl methacrylate(BMA) polymerization,affording high molecular weight poly(BMA)s.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Thermo-and pH-sensitive Polymer with Pendant Spacer-linked Imidazole Cycles

By the reaction of poly(acryloyl chloride) with N-(3-aminopropyl)imidazole, poly(N-(3-(1H-imidazol-1-yl)propyl)acrylamide) was synthesized. The new polymer contains an imidazole ring removed from the main chain by a spacer of five bonds. The structure and purity, molecular weight, hydrodynamic and thermosensitive properties of the obtained sample were studied by ¹H-and ¹³C-NMR, FTIR spectroscopy, acid-base titration, light scattering, turbidimetry and viscometry. The observ...     

A comparative study on p-doping behavior of polythiophenes with CH_3SO_3H

Four kinds of polythiophenes have been doped with CH3SO3H in CHCl3 under air,oxygen,and nitrogen. In the doping of two types of poly(3-hexylthiophene)s,P3HexTh(Zn/Ni)and P3HexTh(Fe)with different contents of a head-to-tail unit,the p-doping occurs at a similar rate.The reaction between poly(3-dodecylthiophene),P3DodTh,and the acid takes place more rapidly.P3OBuTh with a butoxy substituent undergoes more facile p-doping and receives photochemical reaction with CHCl3,and this reaction obeys a pseudo-first-order rate law with a rate constant kobs of 1.42×10-5s-1at room tempera- ture.     

SYNTHESIS OF TRIBLOCK COPOLYMERS OF STYRENE AND ISOPRENE BY A NITROXIDE-MEDIATED LIVING FREE RADICAL POLYMERIZATION

The controlled free radical polymerization of styrene and isoprene initiated with benzoyl peroxide (BPO) in the presence of 2,2,6,6-tetramethyl piperidine-N-oxyl (TEMPO) at 125 ℃ were performed. The obtained polyisoprene and polystyrene homopolymers served as macroinitiators for block copolymerization of isoprene and styrene to synthesize poly(styrene-b-isoprene) and poly(isoprene-b-styrene) diblock copolymers. Diblock copolymers with well-defined structures as well as controlled and narrow molecular weight distribution wereobtained from the lower-mass polystyrene and polyisoprene homopolymers. These copolymers were found to be active as macroinitiators in the synthesis of the poly(styrene-b-isoprene-b-styrene) and poly(isoprene-b-styrene-b-isoprene) triblock copolymers. 1H-NMR spectroscopy and gel permeation chromatography (GPC) were used for the investigation of polymer strucmre, molecular weight and polydispersity (PD).     

A comparative study on p-doping behavior of polythiophenes with CH<Subscript>3</Subscript>SO<Subscript>3</Subscript>H

Four kinds of polythiophenes have been doped with CH3SO3H in CHCl3 under air, oxygen, and nitrogen. In the doping of two types of poly(3-hexylthiophene)s, P3HexTh(Zn/Ni) and P3HexTh(Fe) with different contents of a head-to-tail unit, the p-doping occurs at a similar rate. The reaction between poly(3-dodecylthiophene), P3DodTh, and the acid takes place more rapidly. P3OBuTh with a butoxy substituent undergoes more facile p-doping and receives photochemical reaction with CHCl3, and this reaction obeys a pseudo-first-order rate law with a rate constant kobs of 1.42×10-5 s-1 at room temperature.     

Synthesis and Crystal Structure of (CH_2)_3(3,5-Me_2Pz)_2. [PhBr_2Sn(CH_2)SnBr_2Ph].2HBr.H_2O (Pz=pyrazole)

1 INTRODUCTION The coordination chemistry of tin or organotin toward poly(pyrazol-1-yl)borate ligands has been extensively investigated in recent years owing to the antitumor activity of some related organotin derivatives containing N-donor ligands. A number of organotin(Ⅳ) complexes containing poly(pyrazol- 1-yl)borate ligands have been synthesized and characterized[1~3], some of which have also shown interesting structural characteristics and reactivities[4~6]. Recently, poly(pyrazol…     

Chemical synthesis, spectral characterization and stability of some electrically conducting polymers

<正>The synthesis,characterization,thermal degradation and stability of polyaniline(PANI),poly(m-nitroaniline), poly(m-chloroaniline) and poly(o-methylaniline) were reported.Different properties were measured and compared with PANI to find out the effect of electron donating groups(-CH_3) and electron withdrawing groups(-Cl,- NO_2).It was found that the presence of any type of substitution in the benzene ring of aniline increased the solubility but reduced the yield,thermal stability and electrical conductivity.Two probe methods were used to measure the electrical conductivity of these polymers.The structural properties of these polymers were characterized by using FTIR and UV-Vis spectroscopic methods.Thermal degradation and stability of these polymers were explained by using thermogravimetric analysis(TGA) and conductivity measurements.