Complexation of poly(ethylene glycol) with some salts of alkali-earth metals

The interaction of poly(ethylene glycol) with some salts of alkali-earth metals (Mg(ClO₄)₂, BaCl₂, SrCl₂, SrBr₂ and CaCl₂) in methanolic solutions was investigated by electroconductivity, viscometry, X-ray diffractometry and NMR. It was established that the conformation of macromolecules is strongly changed in the presence of Mg(ClO₄)₂. Chlorides and bromides of alkali-earth metals have a weak influence on macromolecule size. The formation of amorphous complexes in the PEG–Mg(ClO₄)₂ system and crystalline complexes in PEG–chloride systems of alkali-earth metals was shown.     

Self-assembly of medium-chain alkyl monoglucosides in ammonium sulfate solutions with poly(ethylene glycol)

We study the phase behavior and microstructure of alkyl-beta-monoglucosides with intermediate chain lengths (octyl- and nonyl-beta-glucoside) in aqueous solutions containing ammonium sulfate and poly(ethylene glycol) (PEG). When the glucoside surfactants are mixed with PEG of molecular weight 3350 or larger, two different phase transitions are observed in the temperature range 0-100 degrees C, with lower and upper miscibility gaps separated by a one-phase isotropic region. Isothermal titration calorimetry is used to quantify the effect of PEG on the micellization properties of the alkyl monoglucosides, whereas small-angle neutron scattering gives insight into the microstructure of the surfactant/polymer mixtures near the liquid-liquid phase boundary. Results show that the range and the strength of the interactions in these solutions are highly affected by the presence of PEG. Solutions with nonyl-beta-glucoside contain larger micelles than those with octyl-beta-glucoside, and the intermicellar interactions are much stronger and longer ranged. The relevance of these findings for membrane protein crystallization is discussed.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Micropallet arrays with poly(ethylene glycol) walls

Arrays of releasable micropallets with surrounding walls of poly(ethylene glycol) (PEG) were fabricated for the patterning and sorting of adherent cells. PEG walls were fabricated between the SU-8 pallets using a simple, mask-free strategy. By utilizing the difference in UV-transmittance of glass and SU-8, PEG monomer was selectively photopolymerized in the space surrounding the pallets. Since the PEG walls are composed of a cross-linked structure, the stability of the walls is independent of the pallet array geometry and the properties of the overlying solution. Even though surrounded with PEG walls, the individual pallets were detached from the array by the mechanical force generated by a focused laser pulse, with a release threshold of 6 microJ. Since the PEG hydrogels are repellent to protein adsorption and cell attachment, the walls localized cell growth to the pallet top surface. Cells grown in the microwells formed by the PEG walls were released by detaching the underlying pallet. The released cells/pallets were collected, cultured and clonally expanded. The micropallet arrays with PEG walls provide a platform for performing single cell analysis and sorting on chip.     

Complex formation of daunomycin with poly(vinylpyrrolidone) and poly(ethylene glycol)

Russian Journal of General Chemistry - Complexes of the anthracycline antitumor antibiotic daunomycin with biocompatible polymer carriers, poly(vinylpyrrolidone) and poly(ethylene glycol), have...     

Surface chemical studies on the competitive adsorption of poly(ethylene glycol) and ammonium poly(methacrylate) onto alumina

The adsorption of poly(ethylene glycol) (PEG) and ammonium poly(methacrylate) (APMA) onto alumina has been examined both individually and in combination. The adsorption density of APMA was found to be higher than that of PEG onto alumina. The adsorption isotherms of PEG and APMA for alumina exhibited a Langmuirian behavior. The adsorption density of PEG was significantly reduced in the presence of APMA, but the reverse was not true. About 60% desorption of PEG from alumina was achieved, while in the case of APMA the amount desorbed was only 10% in the pH range of 3-6. The zeta potential values of alumina were decreased and the isoelectric point (i.e.p.) values were shifted toward acidic pH values, proportional to the concentration of APMA added. However, such changes in the electrokinetic behavior were not observed by the addition of PEG. The dispersion behavior of alumina in the combined presence of PEG and APMA essentially followed the trends obtained for the alumina-APMA system, corroborating the electrokinetic measurements. Coprecipitation tests confirmed complexation between aluminum species and APMA in the bulk solution, but not with PEG. The interaction between alumina and PEG is primarily governed by hydrogen-bonding forces, while both hydrogen bonding and chemical interaction are involved in the case of the alumina-APMA system. FTIR spectroscopic studies provided evidence in support of the interaction mechanisms proposed.     

Creating patterned poly(dimethylsiloxane) surfaces with amoxicillin and poly(ethylene glycol)

This paper reports a simple microwave plasma patterning of poly(dimethylsiloxane) (PDMS) surfaces, which is accomplished by allowing selective surface areas to microwave plasma exposure in the presence of gaseous monomer. When maleic anhydride is used for microwave plasma reaction in the presence of physical barrier on the PDMS substrate, the resulting patterned surfaces with chemically bonded maleic anhydride and carboxylic acid groups are generated. In this particular study we attached amoxicillin via ammonolysis under weak base conditions in the presence of a catalyst as well as poly(ethyleneglycol) (PEG). A combination of internal reflection IR imaging (IRIRI) and atomic force microscopy (AFM) revealed that amoxicillin and PEG can be readily reacted on the microwave plasma patterned PDMS surfaces. Surface areas directly exposed to microwave plasmons exhibit the highest reactivity due to higher content of functional groups. These studies also show that molecular weight of PEG has also significant effect on kinetics of surface reactions.     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Enhanced removal of hemicelluloses from cellulosic fibers by poly(ethylene glycol) during alkali treatment

Enhancing removal of hemicelluloses from cellulosic fibers is of decisive importance for producing high-purity cellulose. In this study, poly(ethylene glycol) (PEG) was added to a cold caustic extraction (CCE) process to promote removal of hemicelluloses from a softwood sulfite dissolving pulp. The content of hemicelluloses was considerably decreased from 11.4 % in the original sample to 5.3 % in the PEG/CCE-treated sample under the studied conditions. This positive result of PEG addition can be explained by (1) improved inward penetration and diffusion of NaOH into the fiber structure and outward diffusion of hemicelluloses from the fiber structure to the bulk phase, and (2) enhanced fiber swelling due to inclusion of PEG in the fiber walls and improved NaOH diffusion. Moreover, the effects of PEG/CCE treatment on the distribution of hemicelluloses in the fiber walls and the molecular weight of the residual hemicelluloses in the resulting pulp were investigated.     

叶酸和聚乙二醇接枝作基因载体用壳聚糖的合成与表征

本研究将叶酸和聚乙二醇接枝到四种不同分子量的壳聚糖氨基侧链上,以改善壳聚糖的靶向性和水溶性作基因载体。用FTIE、1HNMR、UV-Vis、DSC和TEM对产物进行了表征,结果表明,叶酸和聚乙二醇被成功地接枝到壳聚糖上,所制得的载体有望作为潜在的肿瘤细胞靶向基因载体。     

Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)

Poly(ethylene glycol) grafted poly(L -lactide) was prepared by ring opening polymerization of L -lactide and epoxy-terminated poly(ethylene glycol) methyl ether (PEGME). Stannous octoate and Al(Et)₃·0.5 H₂O were tested as polymerization catalysts, and Al(Et)₃·0.5 H₂O was found to be more effective for the ring-opening of the epoxy group of the modified PEGME monomer. The synthesized polymers were characterized by NMR and the efficiency of the incorporation of epoxy-terminated PEGME in the copolymer was determined.     

Interaction between poly(ethylene glycol) and two surfactants investigated by diffusion coefficient measurements

Dynamic light scattering (DLS) and fluorescence recovery after pattern photobleaching (FRAPP) were used to study the interaction of low molecular weight poly(ethylene glycol) (PEG) with micelles of two different surfactants: tetradecyldimethyl aminoxide (C(14)DMAO, zwitterionic) and pentaethylene glycol n-dodecyl monoether (C(12)E(5), non-ionic). By using an amphiphilic fluorescent probe or a fluorescent-labeled PEG molecule, FRAPP experiments allowed to follow the diffusion of the surfactant-polymer complex either by looking at the micelle diffusion or at the polymer diffusion. Experiments performed with both fluorescent probes gave the same diffusion coefficient showing that the micelles and the polymer form a complex in dilute solutions. Similar experiments showed that PEG interacts as well with pentaethylene glycol n-dodecyl monoether (C(12)E(5)).     

Phase separation in mixtures of poly(ethylene glycol monomethylether) and poly(propylene glycol) oligomers

Time-resolved light scattering was employed to investigate kinetics of phase separation in mixtures of poly (ethylene glycol monomethylether) (PEGE)/poly (propylene glycol) (PPG) oligomers. Phase diagrams for PEGE/PPG of varying molecular weights were established by means of cold point measurements. The oligomer mixtures reveal an upper critical solution temperature (UCST). Several temperature quench experiments were carried out with a 60/40 PEGE/PPG blend by rapidly quenching from a single phase (69°C) to two-phase temperatures (66–61°C) at 1°C intervals. As is typical for oligomer mixtures, the early stage of spinodal decomposition (SD) was not detected. The kinetics of phase decomposition was found to be dominated by the late stage of SD. Time-evolution of scattering intensity was analyzed in accordance with nonlinear and dynamical scaling theories. The time dependence of the peak intensity I_m and the corresponding peak wavenumber q_m was found to follow the power-law {I_m(t)? t^α, q_m(t)? t^-β} with the values of α = 3 ± 0.3 and β = 1 ± 0.2, which are very close to the values predicted by Siggia. This process has been attributed to a coarsening mechanism driven by surface tension. In the temporal scaling analysis, the structure function reveals university with time, suggesting self-similarity. Phase separation dynamics in 60/40 PEGE/PPG resembles the behavior predicted for off-critical mixtures.     

Interaction between poly(ethylene glycol) and water as studied by differential scanning calorimetry

The interaction between poly(ethylene glycol) (PEG) and water was studied by differential scanning calorimetry (DSC). The DSC curves of PEG–water systems were classified into three groups according to the difference in molecular weight. The melting peaks of eutectic mixture appeared for PEG with molecular weight higher than 1000. The eutectic point temperature shifted to higher temperatures and the eutectic point composition shifted to lower concentrations of PEG with increasing molecular weight. The maximum hydration number per ethylene glycol (EG) unit was estimated as 1.6, 2.4, and 3.3 for samples with molecular weights 400, 1540, and 70,000, respectively. No thermal change was found in PEG1540‐water system for a narrow weight fraction range of 0.585–0.605 for overall measuring temperatures due to perfect supercooling. The glass transition temperature shifted to higher temperatures with increasing molecular weight of PEG. A modified Flory–Huggins equation was used to fit curves for experimental liquidus data in phase diagrams. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 496–506, 2001     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

Electrical and differential scanning calorimetry studies of poly(ethylene oxide) complexed with alkaline-earth thiocyanates

Audio-frequency dielectric relaxation measurements and differential scanning calorimetry studies have been performed on poly(ethylene oxide) (PEO) complexed with calcium and barium thiocyanate. The measurements were performed over the temperature range 5.5-300 K. The relaxation spectrum for the complexed material consists of two peaks. The activation enthalpy for the peak corresponding to the γ relaxation of pure PEO depends upon the size of the dopant cation. The activation enthalpy for the second peak is independent of the nature of the dopant cation and is very similar to that observed for the α_c relaxation observed in pure PEO. Furthermore, the room-temperature electrical conductivity of the complexed materials is much smaller than that for pure PEO and hence very much less than for PEO-complexed with alkali-metal salts. However, above T_g the conductivity rises rapidly and is larger for the barium-thiocyanate-complexed PEO than for the calcium-complexed material. Finally, the DSC studies show that one effect of the ions is to shift the glass transition to higher temperatures.     

Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.