Numerical simulation of electrokinetic injection techniques in capillary electrophoresis microchips

The effective design and control of a capillary electrophoresis (CE) microchip requires a thorough understanding of the electrokinetic transport phenomena associated with its microfluidic injection system. The present study utilizes a numerical simulation approach to investigate these electrokinetic transport processes and to study the control parameters of the injection process. Injection systems with a variety of different configurations are designed and tested, including the cross-form, T-form, double-T-form, variable-volume focused flow cross-form, and variable-volume triple-T-form configuration. Each injection system cycles through a predetermined series of steps in which the magnitudes and distributions of the applied electric field are precisely manipulated in order to effectuate a virtual valve. This study investigates the sample leakage effect associated with each of the injection configurations and applies the double-L, pullback, and focusing injection techniques to minimize the sample leakage effect. The injection methods presented in this paper have the exciting potential for use in high-quality, high-throughput chemical analysis applications and throughout the micro-total-analysis systems field.     

DNA aggregation and cleavage in CGE induced by high electric field in aqueous solution accompanying electrokinetic sample injection

The phenomenon of peak area decrease due to high injection voltage (V_inj, e.g. 10–30 kV, 200–600 V/cm in the 50 cm capillary) was found in the analysis of very dilute DNA fragments (<0.2 mg/L) by using high‐sensitive electrokinetic supercharging‐CGE. The possibility of DNA cleavage in aqueous solution was suggested, in addition to the aggregation phenomenon that is already known. The analysis of intentionally voltage‐affected fragments (at 200 V/cm) also showed decreased peak areas depending on the time of the voltage being applied. Computer simulation suggested that a high electric field (a few kV/cm or more) could be generated partly between the electrode and the capillary end during electrokinetic injection (EKI) process. After thorough experimental verification, it was found that the factors affecting the damage during EKI were the magnitude of electric field, the distance between tips of electrode and capillary (D_e/c), sample concentration and traveling time during EKI in sample vials. Furthermore, these factors are correlating with each other. A low conductivity of diluted sample would cause a high electric field (over a few hundred volts per centimeter), while the longer D_e/c results in a longer traveling time during EKI, which may cause a larger degree of damage (aggregation and cleavage) on the DNA fragments. As an important practical implication of this study, when the dilute DNA fragments (sub mg/L) are to be analyzed by CGE using EKI, injection voltage should be kept as low as possible.     

Simplex maximization of the correlation coefficient for DNA sizing analysis by capillary electrophoresis

The separation of DNA molecules in polymeric solution by capillary electrophoresis involves the optimization of several variables, such as polymer solution concentration, electric field separation, temperature, etc. The optimization of each variable individually usually is a time-consuming process and the results may reach a false optimum point. Chemometric methods are suitable to be applied in such cases in which a number of variables can be optimized simultaneously. The simplex is a chemometric method that can perform such a task easily and efficiently. In this study, a simplex method was carried out to maximize the correlation coefficient (r(2)) of a logarithmic plot of mobility (mu) vs. base pair (bp), which was obtained from the separation of DNA fragments of size between 75 and 4072 bp. The simplex showed three vertexes with r(2) > 0.98 and the vertex 21 showing the highest resolution. For the fragments between 201 and 2036 bp, the r(2) increased to 0.992 with and relative standard deviation (RSD) lower than 0.2% (inter- and intra-day variation). The precision of the method in determining the size of a PCR DNA fragment was carried out using a 1 kbp DNA ladder. With the addition of an internal standard to the sample, the precision could be further improved.     

High-sensitivity capillary gel electrophoretic analysis of DNA fragments on an electrophoresis microchip using electrokinetic injection with transient isotachophoretic preconcentration

The research adopted a single-channel microchip as the probe, and focused electrokinetic injection combined with transient isotachophoresis preconcentration technique on capillary electrophoresis microchip to improve the analytical sensitivity of DNA fragments. The channel length, channel width and channel depth of the used microchip were 40.5 mm, and 110 and 50 μm, respectively. The separation was detected by CCD (charge-coupled device) (effective LENGTH=25 mm, 260 nm). A 1/100 diluted sample (0.2 mg/l of each DNA fragment) of commercially available stepladder DNA sample could be baseline separated in 120 s with S/N=2–5. Compared with conventional chip gel electrophoresis, the proposed method is ideally suited to improve the sensitivity of DNA analysis by chip electrophoresis.     

Simplex optimization of a programmed temperature capillary gas chromatographic separation

The modified simplex algorithm proposed by Nelder and Mead has been used to optimize the separation by temperature programmed capillary GC, of volatile compounds present in alcoholic beverages. An adequate objective function, CRF, based on the separation factor of Kaiser has been used for the optimization process. A factorial design was initially performed to verify the relationship between the several parameters of interest. Following this, the optimization was executed and a surface adjusted within the set of experimental data.     

Analytical study of Joule heating effects on electrokinetic transportation in capillary electrophoresis

Electric fields are often used to transport fluids (by electroosmosis) and separate charged samples (by electrophoresis) in microfluidic devices. However, there exists inevitable Joule heating when electric currents are passing through electrolyte solutions. Joule heating not only increases the fluid temperature, but also produces temperature gradients in cross-stream and axial directions. These temperature effects make fluid properties non-uniform, and hence alter the applied electric potential field and the flow field. The mass species transport is also influenced. In this paper we develop an analytical model to study Joule heating effects on the transport of heat, electricity, momentum and mass species in capillary-based electrophoresis. Close-form formulae are derived for the temperature, applied electrical potential, velocity, and pressure fields at steady state, and the transient concentration field as well. Also available are the compact formulae for the electric current and the volume flow rate through the capillary. It is shown that, due to the thermal end effect, sharp temperature drops appear close to capillary ends, where sharp rises of electric field are required to meet the current continuity. In order to satisfy the mass continuity, pressure gradients have to be induced along the capillary. The resultant curved fluid velocity profile and the increase of molecular diffusion both contribute to the dispersion of samples. However, Joule heating effects enhance the sample transport velocity, reducing the analysis time in capillary electrophoretic separations.     

The effect of injection procedures on efficiency in micellar electrokinetic capillary chromatography

Summary Micellar electrokinetic capillary chromatography (MECC) involves the application of a high voltage (10–30 KV) across a capillary column (75μm i.d.) which is filled with a solution containing micelles. The mobile phase in this work consisted of sodium dodecyl sulfate in an aqueous borate/phosphate buffer system. Injection parameters in MECC were investigated to minimize the contribution to band-broadening resulting from the injection process. Efficiencies as high as 240,000 theoretical plates/meter are reported.     

Fast analysis of phenolic acids by electrokinetic supercharging‐nonaqueous capillary electrophoresis

A method was developed to analyze phenolic acids by nonaqueous CE after online concentration with electrokinetic supercharging. The EOF was reversed using a polyelectrolyte multilayer approach based on the successive adsorption of poly(diallyldimethylamonium chloride) and poly(styrenesulfonate) to reduce the analysis time. The results showed that the coatings were stable during 40 consecutive injections. Four phenolic acids were separated within 8 min using 30 mM ammonium acetate (pH^* 8.0). The electrokinetic injection time and terminator length of the electrokinetic supercharging method were optimized to improve the detection sensitivity. Under the optimized conditions (electrokinetic injection of 100 s, ?10 kV; terminator of 20 mM 2‐(cyclohexylamino) ethanesulfonic acid, 22 s, 0.5 psi), the sensitivity was enhanced from 300‐ to 440‐fold. The detection limits, based on three times noise, were in the range 1.0–2.5 ng/mL.     

Systematic optimization of exhaustive electrokinetic injection combined with micellar sweeping in capillary electrophoresis

The combination of exhaustive electrokinetic injection and sweeping micellar electrokinetic chromatography (sweeping-MEKC) in capillary electrophoresis often provides a several thousand-fold improvement in concentration detection limit. However, reproducibility of this method has been a major issue that often prevents its use as a quantitative tool for the analysis of ultra-trace analytes in complex matrices. In this paper, we demonstrate that such a technique can be systematically optimized with five key factors: the conductivity of the sample solution, the conductivities of the separation buffers, the fraction of the capillary that is filled with the high conductivity buffer, the electrokinetic injection time, and the surfactant concentration. By controlling the sample conductivity, we were able to achieve highly reproducible results, while still maintaining the sensitivity of field-amplified sample injection. At optimal conditions, we were able to analyze three amine drugs (amphetamine, methamphetamine, and methylenedioxymethamphetamine) with limits of detection of 6 to 8 pg ml(-1) (ppt), which is a several thousand-fold improvement over normal sample injection using CE with a photodiode array detector.     

Fast and sensitive diagnosis of thalassemia by capillary electrophoresis

This paper demonstrates the diagnosis of -thalassemia by capillary electrophoresis in conjunction with laser-induced fluorescence using poly(ethylene oxide) (PEO) solutions in the presence of electroosmotic flow (EOF). During the electrophoretic separation, PEO solution entered a capillary from the anodic vial by EOF. The separation of a mixture of the polymerase chain reaction (PCR) products (330 and 334 base pairs) from a healthy person and a -thalassemia patient was accomplished within 15 min at 15 kV using 1.5% PEO containing 2 M urea at 30 °C. The electropherogram patterns instead of migration times were used to diagnose -thalassemia, with an accuracy of 100% for the analyses of 11 blood samples from suspected patients. After injecting a large volume of the mixture to the capillary filled with 800 mM Tris-borate buffer (pH 10.0), the DNA fragments stacked due to increases in viscosity and sieving when migrating into 1.5% PEO solution. As a result of improved sensitivity, only 15 PCR cycles were required when using 500 ng of DNA templates. The results shown in this study indicate the potential of this simple, rapid, and cost-effective method for the diagnosis of -thalassemia.Abbreviations CE Capillary electrophoresis - EOF Electroosmotic flow - EtBr Ethidium bromide - LIF Laser-induced fluorescence - PCR Polymerase chain reaction - PEO Poly(ethylene oxide) - TRIS Tris(hydroxymethyl)aminomethane - TB TRIS-borate     

Chemiluminescence detection in capillary electrophoresis using an ultra-fast co-catalyzed peroxyoxalate chemiluminescent reaction and electrokinetic reagent delivery

Summary Despite the impressive limits of detection and inherent selectivity afforded by peroxyoxalate chemiluminescence (POCL) detection, efficient coupling of POCL to capillary electrophoresis (CE) remains limited by the relatively slow kinetics of the reactions that drive imidazole-catalyzed chemiluminescence. Moreover, oxalate esters, used in POCL, are sparingly soluble in polar solvents and hydrolyze rapidly, presenting an additional challenge with respect to detection following aqueous phase separations. In this paper, a novel method for coupling an ultrafast POCL reaction to CE is presented. Post separation electrokinetic delivery of the POCL reagent bis(2,4,6-trichlorophenyl)oxalate (TCPO) was accomplished using a commercially available micro tee. Electrokinetic addition of TCPO allowed for precise control of the ratio of TCPO to the chemiluminescence (CL) reagents 1,2,2,6,6-pentamethylpiperidine (PMP) and 1,2,4-triazole (triazole), spiked into the running buffer. This novel method for CL reagent delivery avoided the problems and costs associated with using pressure or mechanical pumps to deliver reagents post separation. Use of this dual-component system (PMP and triazole) resulted in intense CL with half-lives of less than 2 seconds. Optimum conditions for CE-POCL detection were investigated using stopped-flow kinetics. The detection limit for 3-aminofluoranthene, following separation by CE, was<0.95 nM.     

Hadamard transform capillary electrophoresis combined with laser-induced fluorometry using electrokinetic injection

Hadamard transform capillary electrophoresis (HTCE) based on electrokinetic injection allows laser-induced fluorescence detection using a small laser, namely the laser-diode-pumped YAG laser, as an excitation source. A small hole is fabricated at the center of a capillary by laser ablation; this hole functions as an inlet port for a sample solution. Therefore, the sample solution can be introduced electrophoretically into the capillary through the small hole. Multiple sample injection is accomplished by introducing a buffer solution from the end of the capillary and the sample solution through the hole. Both solutions are injected using two sets of high-voltage power supplies and migrate toward the opposite end of the capillary. A fluorescent analyte, rhodamine B, is successfully detected in the case of both single and multiple injection according to the Hadamard sequence code. By transforming the data encoded by the Hadamard matrix, the decoded data showed an increase in the signal-to-noise (S/N) ratio by a factor of 9.8. In the case of the sample containing two amino acids labeled with rhodamine B isothiocyanate (RBITC), although the concentration of every component including free RBITC is lower than the concentration limit of detection obtained by single injection, a substantial improvement in the sensitivity is achieved and all components are identified by the Hadamard transform technique.     

Factors influencing the electrokinetic injection of oligonucleotides in capillary gel electrophoresis when using laser‐induced fluorescence detection

Capillary gel electrophoresis (CGE) is a powerful tool for the analysis of oligonucleotides owing to its extraordinary resolving power. However, the only feasible injection mode for CGE, electrokinetic injection, can cause bias of the injected amount and thus reproducibility issues for CGE methods. Although the source of the bias in electrokinetic injection for analysis of small molecules by capillary zone electrophoresis has long been identified, there are very few studies on electrokinetic injection issues for biological molecules analyzed by CGE. In this study, we report three issues related to electrokinetic injection for oligonucleotides. First, the relationship between the injection amount and the sample solution resistance is not always linear for oligonucleotides, as has been observed for small molecules. Second, the injecting water prior to an oligonucleotide sample dramatically improves the reproducibility of both the injected amount and resolution through a ‘stacking‐like’ mechanism. Third, optimizing the gel concentration dramatically increases the amount of oligonucleotide that is injected into the column. Copyright © 2013 John Wiley & Sons, Ltd.     

Analysis of phenolic acids by non-aqueous capillary electrophoresis after electrokinetic supercharging

Electrokinetic supercharging (EKS), a new and powerful on-line preconcentration method for capillary electrophoresis, was utilized in non-aqueous capillary electrophoresis (NACE) to enhance the sensitivity of phenolic acids. The buffer acidity and concentration, leader and terminator length and electrokinetic injection time were optimised, with the optimum conditions being: a background electrolyte of 40 mM Tris-acetic acid (pH 7.9), hydrodynamic injection of 50 mM ammonium chloride (22 s, 0.5 psi) as leader, electrokinetic injection of the sample (180 s, -10 kV), hydrodynamic injection of 20 mM CHES (32 s, 0.5 psi) as terminator, before application of the separation voltage (-25 kV). Under these conditions the sensitivity was enhanced between 1333 and 3440 times when compared to a normal hydrodynamic injection with the sample volume <3% of the capillary volume. Detection limits for the seven phenolic acids were in the range of 0.22-0.51 ng/mL and EKS was found to be 3.6-7.9 times more sensitive than large-volume sample stacking and anion selective exhaustive injection for the same seven phenolic acids.     

Separation of binaphthyl enantiomers by capillary zone electrophoresis and electrokinetic chromatography

The capillary electrophoretic (CE) separation of the enantiomers of three binaphthyl compounds is investigated. Several CE modes such as cyclodextrin (CD) modified capillary zone electrophoresis (CZE) (CD-CZE), micellar electrokinetic chromatography (MEKC), cyclodextrin electrokinetic chromatography (CD-EKC), etc. are employed for the simultaneous enantiomer separation of the three solutes. The successful separation was achieved by combining two modes, in other words by using more than two chiral selectors. A development of the CE enantiomer separation is demonstrated for the binaphthyl compounds. The enantioselectivity of binaphthyl compounds is alo briefly discussed.     

Highly efficient size separation of CdTe quantum dots by capillary gel electrophoresis using polymer solution as sieving medium

In this paper, we present a new method for highly efficient size separation of water-soluble CdTe quantum dots (QDs) based on CGE using polymer solution as sieving medium. CdTe QDs were synthesized in aqueous phase by a chemical route with mercaptopropionic acid as a ligand. In the alkaline solution, CdTe QDs possess negative charges and migrate to the anode in the electric field. In linear polyacrylamide sieving medium, the migration time of CdTe QDs was increased with the size of CdTe QDs. The effects of some factors, such as types, concentrations, and pH of sieving media, on the separation of CdTe QDs were investigated systematically. Highly efficient separation of CdTe QDs was obtained in linear polyacrylamide sieving medium, and collection of fractions was automatically accomplished by CGE technique. Our preliminary results show that CGE technique is an efficient tool for characterization and size-dependent separation of water-soluble nanoparticles. In addition, the fraction collection in CGE may be useful in certain special applications such as fabrication of nanodevices in the future.     

Rapid separation of acetophenone and its monohydroxy isomers by capillary electrophoresis

This work describes the development of a capillary electrophoresis(CE)method for the simultaneous separation of acetophenone(AP),2-hydroxyacetophenone(2-HAP),3-hydroxyacetophenone(3-HAP)and 4-hydroxyacetophenone(4-HAP)in synthetic mixtures using 10 mmol/L of sodium tetraborate buffer(pH 9.5).The aim of this work is to demonstrate the effectiveness of CE to separate AP and its monohydroxy isomers and to defne how the separations are affected by buffers,buffer pH,sample matrices and separation voltage.This method was successfully used for the trace level separation and determination of 2-HAP,3-HAP and 4-HAP in synthetic mixture and 4-HAP in spiked plasma samples.     

改良型单纯形法优化硝基喜树碱的毛细管电泳分离

使用改良型单纯形法优化硝基喜树碱(Nitrocamprothecinum,NC)一对同分异构体的毛细管电泳分离。考察了运行电压、缓冲液的pH、硼砂和十二烷基磺酸钠(SDS)的浓度等4个影响因子,与传统的单因子优化方法及其结果进行比较。改良型单纯形法(采用CRS函数为响应函数)在分析方法的建立过程中显著减少了实验步骤,获得了更好的电泳分离条件。