Anionic methods for synthesis of star polymers

Leading position among numerous methods for synthesis of star polymers is occupied, as regards their potential and diversity, by techniques based on the anionic polymerization. The review considers five basic approaches to application of the anionic polymerization mechanisms in relation to an agent used or procedure employed (methods with polyfunctional coupling agents, multifunctional initiators, polymerizing and nonpolymerizing divinyl agents; multistage methods, methods using C₆₀ fullerene). All groups of syntheses are illustrated by examples, and advantages of methods for synthesis of various homo- and heteroarm star structures are demonstrated. Particular attention is given to syntheses with C₆₀ fullerene. The potential of C₆₀ fullerene as a coupling agent for “living” polymer chains and methods for conversion of polymeric derivatives of C₆₀ (hexaadducts) to polyfunctional macroinitiators of anionic polymerization are described and techniques for functionalization of polymeric fullerene derivatives and their coupling into structures with a complex controllable architecture are presented.     

Star-shaped polymers with a doubled fullerene (C60) branching center

Star-shaped regular homopolystyrenes with 22 arms and heteroarm polymers with 12 PS arms and 10 poly(2-vinypyridine) arms have been synthesized by consecutive coupling-functionalization-coupling reactions. The synthesis includes the following stages: the exhaustive grafting of fullerene C₆₀ by polystyryllithium chains (living hexaadducts); the coupling of hexaadducts with the use of dimethyldichlorosilane or 1,4-dibromobutane into twelve-arm macromolecules, where the branching center is composed of two covalently bonded fullerene C₆₀ molecules; functionalization of twelve-arm double-core PS stars during the action of excess dihalides (the replacement of lithium atoms with groups containing chlorine or bromine atoms); and the coupling of living chains of PS or poly(2-vinylpyridine) via reactions with halogen-containing groups at the branching center of double-core PS stars. Linear living polymers used as arms have been prepared by anionic polymerization. Exclusion chromatography has been used to control the individual stages of synthesis. The molecular characteristics of the PS precursor and of star-shaped polymers have been studied in terms of hydrodynamics and light scattering.     

Hydrodynamic and electrooptical properties of star-shaped heteroarm fullerene (C60)-containing polymers in solutions

Star-shaped heteroarm polymers with a C₆₀ branching center and polystyrene and poly(2-vinylpyridine) arms of equal molecular masses have been studied by the methods of molecular hydrodynamics (translational diffusion and viscometry) and electrooptics (the Kerr effect). The experimental hydrodynamic data are interpreted in terms of the regular star model. The molecular masses and hydrodynamic sizes of star-shaped heteroarm polymers in solutions are estimated. A comparison of these values with the corresponding parameters of linear polymer-analogs (polystyrene and poly(2-vinylpyridine)) makes it possible to characterize the branching degree of macromolecules. The study of the electrooptical properties of the heteroarm polymer in benzene demonstrates the tendency of macromolecules toward aggregation.     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Effect of fullerene C60 as a branching center on molecular and polarization properties of star-shaped polystyrenes

The behavior of molecules of a star-shaped six-arm polystyrene with a covalently bound fullerene C₆₀ as a branching center was studied by viscometry and by measuring the electrooptical Kerr effect and the dielectric polarization in solutions. It was shown that polarization and electrooptical characteristics of a fullerene-containing polystyrene (C₆₀ ～ 3 wt %) differ by an order of magnitude or even greater from the corresponding characteristics of the parent polymer. A comparison of the above properties with the analogous characteristics of the model hexaadduct (the products of reaction between octyllithium and fullerene C₆₀) demonstrated that a difference in the behavior of the star-shaped polystyrene and its parent analog is associated with the structural features of the branching center, among which is the occurrence of six proton addends that are bonded rather weakly to the fullerene cage in the hexaadducts under study.     

Structural features and initiating properties of the hexaadduct of polystyryllithium and fullerene C60 in tetrahydrofuran and their role in synthesis of heteroarm star-like polymers

Structural transformations of the hexaadduct of polystyryllithium and fullerene C₆₀ in the course of interaction with a proton donor or 1,1-diphenylethylene and at initiation of styrene polymerization were studied, and their role in the formation of heteroarm star-like polymers with C₆₀ center of branching and arms of polystyrene and poly-2-vinylpyridine was elucidated.     

Electrochemically formed fullerene-based polymeric films

The recent results of investigations involving the electrochemical formation of polymers containing fullerenes and studies of their properties and applications are critically reviewed. From a structural point of view, these polymers can be divided into four main categories including (1) polymers with fullerenes physically incorporated into the foreign polymeric network without forming covalent bonds, (2) fullerene homopolymers formed via [2+2] cycloaddition, (3) “pearl necklace” polymers with fullerenes mutually linked covalently to form polymer chains, and (4) “charm bracelet” polymers containing pendant fullerene substituents. The methods of electrochemical polymerization of these systems are described and assessed. The structural features and properties of the electrochemically prepared polymers and their chemically synthesized analogs are compared. Polymer films containing fullerenes are electroactive in the negative potential range due to electroreduction of the fullerene moieties. Related films made with fullerenes derivatized with electron-donating moieties as building blocks are electroactive in both the negative and positive potential range. These can be regarded as “double cables” as they exhibit both p- and n-doping properties. Fullerene-based polymers may find numerous applications. For instance, they can be used as charge-storage and energy-converting materials for batteries and photoactive units of photovoltaic cell devices, respectively. They can be also used as substrates for electrochemical sensors and biosensors. Films of the C₆₀/Pt and C₆₀/Pd polymers containing metallic nano-particles of platinum and palladium, respectively, effectively catalyze the hydrogenation of olefins and acetylenes. Laser ablation of electrochemically formed C₆₀/M and C₇₀/M polymer films (M=Pt or Ir) results in fragmentation of the fullerenes leading to the formation of hetero-fullerenes, such as [C₅₉M]⁺ and [C₆₉M]⁺.Dedicated to Professor Dr. Alan M. Bond on the occasion of his 60th birthday.     

Thermal degradation of a heteroarm starlike polymer with fullerene C60 core

The mechanism of thermal degradation of a 12-arm starlike polymer with fullerene C₆₀ core and equal number of polystyrene and poly(tert-butyl methacrylate) arms was studied by thermal desorption mass spectrometry. Thermal characteristics of the heteroarm stars were compared with those of six-arm starlike fullerene-containing polystyrenes and linear poly(tert-butyl methacrylate).     

Electrochemical formation and properties of two-component films of transition metal complexes and C60 or C70

The electrochemically active polymers have been formed during electro-reduction carried out in solution containing fullerenes, C₆₀ or C₇₀, and transition metal complexes of Pd(II), Pt(II), Rh(III), and Ir(I). In these films, fullerene moieties are covalently bounded to transition metal atoms (Pd and Pt) or their complexes (Rh and Ir) to form a polymeric network. All films exhibit electrochemical activity at negative potentials due to the fullerene cages reduction process. For all studied metal complexes, yields of formation of films containing C₇₀ are higher than yields of electrodeposition of their C₆₀ analogs. C₇₀ /M films also exhibit higher porosity in comparison to C₆₀/M layers. The differences in film morphology and efficiency of polymer formation are responsible for differences in electrochemical responses of these films in acetonitrile containing supporting electrolyte only. C₇₀/M films shows more reversible voltammeric behavior in negative potential range. They also show higher potential range of electrochemical stability. Processes of film formation and electrochemical properties of polymers depend on the transition metal ions or atoms bonding fullerene cages into polymeric network. The highest efficiency of polymerization was observed for fullerene/Pd and fullerene/Rh films. In the case of fullerene/Pd films, the charge transfer processes related to the fullerene moieties reduction in negative potential range exhibit the best reversibility among all of the studied systems. Capacitance performances of C₆₀/Pd and C₇₀/Pd films deposited on the porous Au/quartz electrode were also compared. Capacitance properties of both films are significantly affected by the conditions of electropolymerization. Only a fraction of the film having a direct contact with solution contributes to pseudocapacitance. Capacitance properties of these films also depend on the size of cations of supporting electrolyte. The C₇₀/Pd film exhibits much better capacitance performance comparison to C₆₀/Pd polymer.     

Specifics of light scattering in solutions of fullerene-containing polymers

The molecular mass and hydrodynamic dimensions of molecules of two fullerene-containing polymers which differ in the preparation procedure and the mode of fullerene C₆₀ binding were determined by means of static and dynamic light scattering and transport techniques (diffusion, sedimentation, gel permeation chromatography). It was established that the molecular masses of polymeric C₆₀ derivatives determined by means of static light scattering are substantially above those measured by means of the transport techniques. Using as an example a polystyrene specimen containing 6.2 wt % C₆₀ prepared according to the widespread technique of solvent evaporation from a mutual fullerene and polymer solution, it was shown that the multicomponent nature, the compositional inhomogeneity, and a lack of coincidence in the signs of refractive index increments for structurally different components of fullerene-containing polymers may cause anomalies in the intensity of light scattering by solutions of these compounds.     

Comparison of electrochemical properties of two-component C60-Pd polymers formed under electrochemical conditions and by chemical synthesis

The electrochemical behavior of C₆₀-Pd polymer formed under electrochemical conditions and by the chemical synthesis was examined. In these polymers, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Both materials deposited at the electrode surface show electrochemical activity at negative potentials due to the reduction of fullerene cage. Electrochemically formed thin polymeric films exhibit much more reversible voltammetric response in comparison to chemically synthesized polymers. The morphology and electrochemical behavior of chemically synthesized C₆₀-Pd polymer depend on the composition of grown solution. Chemical polymerization results in formation of large, ca. 50 μm, crystallic superficial structures that are composed of regular spherical particles with a diameter of 150 nm. The capacitance properties of C₆₀-Pd films were investigated by cyclic voltammetry and faradaic impedance spectroscopy. Specific capacitance of chemically formed films depends on the conditions of film formation. The best capacitance properties was obtained for films containing 1:3 fullerene to Pd molar ratio. For these films, specific capacitance of 35 Fg^?1 was obtained in acetonitrile containing (n-C₄H₉)₄NClO₄. This value is much lower in comparison to the specific capacitance of electrochemically formed C₆₀-Pd film.     

Structural features of star-shaped fullerene (C60)-containing polystyrenes: Neutron scattering experiments

Structural features of star-shaped polyprotostyrene and polydeuterostyrene containing fullerene C₆₀ as a branching center have been studied by small-angle neutron scattering in benzene solutions. The results are compared with the corresponding characteristics of linear PSs, the molecular mass of which is equal to the molecular mass of one star arm in star-shaped macromolecules. The molecular masses of star-shaped polymers are estimated, and their branching center is shown to be hexafunctional. At relatively low concentrations of starshaped polymers in solutions, one can observe excluded volume effects, which are related by the presence of regions with higher densities at the center of a macromolecule. Using the Fourier transform of the scattering cross section, three-dimensional correlation functions are obtained, and the regular structure of stars is proved. Conclusions about the local correlations of units within one star arm and averaged correlations between units of neighboring arms within a given star are derived. An analysis of three-dimensional correlations shows that the centers of mass of all star arms are directed along orthogonal axes passing through the C₆₀ branching center of a star-shaped macromolecule.     

Hydrodynamic, electrooptical, and conformational properties of fullerene-containing poly(2-vinylpyridines) in solutions

For C₆₀ fullerene-containing poly(2-vinylpyridines) synthesized by anionic polymerization, the molecular mass and hydrodynamic size of macromolecules in solutions have been determined by molecular hydrodynamics (translational diffusion and viscometry) and electrooptics in dilute benzene and THF solutions. Under the same conditions in the molecular mass range (9.8–123) × 10³, the hydrodynamic behavior of linear poly(2-vinylpyridines) and their molecular-mass dependences have been examined and the conformational characteristics of macromolecules have been established. The branching of macromolecules has been characterized by comparing the properties of star-shaped fullerene-containing and linear poly(2-vinylpyridines). With consideration of the hydrodynamic data interpreted within the framework of regular star model, it is inferred that on average three to four linear polymer chains with a molecular mass of (8 ± 3) × 10³ for each chain are attached to a fullerene core of C₆₀ in molecules of fullerene-containing poly(2-vinylpyridines). The specific Kerr constant of fullerene-containing poly(2-vinylpyridines) in dilute benzene solution is ?(14 ± 1) × 10^?12 cm⁵/[g (300 V)²]. As evidenced by the electrooptical data, the incorporation of fullerene into the polymer weakens self-association of macromolecules in solution.     

Structure and supramolecular structures of star-shaped fullerene-containing heteroarm polymers in deuterotoluene

Self-organization of star-shaped polymers containing six PS arms and six polar polymer arms on a common C₆₀ branching center is studied by means of small-angle neutron scattering in deuterotoluene. The results are compared with the corresponding characteristics of six-arm star-shaped fullerene-containing PSs. It is shown that the incorporation of additional polar arms into a six-arm macromolecule leads to its compression due to an increase in the degree of coiling of polar chains in the nonpolar solvent. In solution, heteroarm stars give rise to supramolecular structures in the form of clusters whose dimensions and density depend on the nature of the polar arms. Stars containing PS and poly(2-vinylpyridine) arms are weakly associated, and the mean number of particles in an associate is ∼1.3. Hybrid polymers containing PS and poly(tert-butyl methacrylate) arms demonstrate capability for mutual penetration that favors the appearance of large structures that have a diameter of ∼50 nm and that include up to 12 macromolecules. Hybrid stars containing PS and diblock copolymer (poly(2-vinylpyridine)-poly(tert-butyl methacrylate)) arms exhibit moderate self-organization that manifests itself in the formation of chain associates built from four macromolecules.     

Anionic Synthesis of Heteroarm,Star-Branched Polymers. Scope and Limitations

Abstract

The scope and limitations of the following methods for the synthesis of heteroarm star-branched polymers are presented: (a) divinylbenzene linking reactions; (b) coupling reactions with macromolecular silyl halides; and (c) 1,1-diphenylethylene-based living linking reactions. The methodology of using l, 3-bis(1-phenylethenyl)benzene to prepare A₂B₂ hetero 4-armed stars is reviewed, and the synthesis of well-defined (polystyrene)₂(1,4-polybutadiene)₂ heteroarm stars is described. The synthesis of well-defined ABC heteroarm star polymers using macromonomers functionalized with 1, 1-diphenylethylene groups is described.     

Characteristics of fullerene C60-doped polymers

The results of studying the characteristics of various polymers that possess different structures and are used for various applications after their modification by minor amounts of fullerene C₆₀ are summarized. The character of bonds that arise in fullerene-doped polymer compositions is considered. Mechanical, physicochemical, and physical characteristics of fullerene-containing polymers that show promise for modern technologies are described. The reasons for improving the performance of fullerene-containing polymers are analyzed.     

Effect of lipophilicity of C60 fullerene derivatives on their ability to inhibit peroxide oxidation of lipids in aqueous medium

The aqueous solutions of C₆₀ fullerene derivatives were studied by means of dynamic light scattering, their effect on the peroxide oxidation of lipids (POL) in aqueous solutions was investigated via chemiluminescence method. It was shown that the colloidal solubility in water, which defines the antioxidant activity of C₆₀ fullerene derivatives during POL, is controlled by the chemical structure of the addend added to C₆₀ fullerene. For the studied derivatives, the direct dependence of the efficiency of POL inhibition on the lipophilicity was established.     

Structural features of fullerene-containing star-shaped polystyrene molecules with Oligomer arms in solutions

The structure and conformational properties of star-shaped oligostyrenes containing fullerene C₆₀ as a branching center and short arms with lengths at the level of the persistent length or a segment of a polystyrene chain are studied by small-angle neutron scattering in deuterotoluene. The gyration radii of linear precursor oligomers (～0.4 and 0.6 nm) and corresponding star-shaped molecules (～1.1 and 1.4 nm) are calculated under the Guinier approximation. The linear oligomer (4–5 units) is found to be a rodlike molecule; arms of star-shaped molecules based on it assume the straightened conformations as well. Linear oligomer chains composed of 6–7 units deviate from the rodlike shape and acquire a certain flexibility in solution, but oligomer chains grafted onto the C₆₀ center preserve the extended conformations. There is no marked tendency toward screening of fullerene by radially extended arms. The number of branches in the star-shaped oligostyrenes corresponds to a functionality of f = 6 preset by the conditions of synthesis.     

Neutron Scattering Studies of Structure and Self-Assembly of Star-Shaped Polymers with Fullerene Centres in Solutions

Protonated star-shaped polystyrenes with single and double fullerene C₆₀ core and the hybrid stars with pairs of polar and non-polar arms (tertbuthylmetacrylate, polystyrene) have been studied in deuterated toluene (20 °C) by small-angle neutron scattering at low and moderate polymer concentrations (c₁ ∼ 1 g/dl, c₂ ∼ 3–6 g/dl) to evaluate the peculiarities of fullerene centre action on polymers self-assembly in solutions. As we found, the cores composed of two fullerenes, linked via Si(CH₃)₂-bridge, induce stars' anisotropic interactions and association into chain-like structures (correlation radius ∼400–600 nm). Meanwhile, the single-core stars of polystyrene and hybrids organize globular clusters (size ∼ 10³ nm) those geometry do not change significantly by polymer content variation.     

Alternatively linking fullerene and conjugated polymers

The stereo‐electronic control over bisadditions of conjugated polymers to fullerene (C₆₀) is explored in the formation of alternating copolymers. The chemistry, resulting configuration, and properties of poly(3‐hexylthiophene)‐alt‐C₆₀ copolymers prepared by either classic pyrrolidine ring formation or an atom transfer radical addition are compared. Both routes result in controlled additions of polymers to C₆₀. Extensive macromolecular modeling through PM6 methods indicate that there is no conjugation between P3HT and C₆₀ in the systems studied. This along with 2D‐NMR, AFM, and photovoltaic characterizations of the materials indicate the importance of the structure of the modified C₆₀ and the nature of the linking group between C₆₀ and P3HT segments in determining the morphology of the copolymers in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2304–2317, 2009