二氧化硅与液体介质的亲和性表征

利用动态核磁脉冲(Dynamic NMR)技术对高浓度的二氧化硅浆料的亲和性进行研究,并建立表征束缚层厚度与亲和性的定量模型。结果表明,在纯丁酮溶剂中,二氧化硅的含量越高,分散时间越长,填料表面束缚层厚度越大;而在树脂溶液体系中,在30%二氧化硅含量附近,填料表面束缚层厚度最大。当处理剂用量约为0.5%(w/w)时,颗粒表面与介质的吸附作用最强。使用不同处理剂制备的二氧化硅浆料,其表面吸附效应也有所不同,并且当浆料静置16 h后,其厚度层发生不同的变化,在丁酮体系中,束缚层厚度部分增加,而甲苯体系中,束缚层厚度减小。     

丝网印刷法制备纳米银线透明导电薄膜

以高纯纳米银线作为导电介质,采用低成本丝网印刷法在普通透明玻璃基底上制备纳米银线薄膜层。经低温退火处理后,采用冷场发射扫描电子显微镜对薄膜的形貌进行表征;分别采用紫外可见分光光度计和四探针测试仪对薄膜的光学透过率和导电性能进行测试。实验系统研究了印刷浆料中纳米银线的含量、印刷层数和退火温度对薄膜的光学透过率和导电性能的影响。当印刷浆料中纳米银线的含量为3%(w/w),印刷层数达到3层,经低温275℃退火后,可制备出光电性能良好的纳米银线薄膜,该薄膜最大可见光透过率为39.4%,表面方块电阻仅为25.6Ω·□^-1。     

ω-苯基-(2S)-N-叔丁氧羰基氨基酸乙酯的制备

格氏试剂和N-叔丁氧羰基焦谷氨酸乙酯反应生成中间体ω-苯基-δ-氧代-(2S)-N-叔丁氧羰基氨基酸乙酯, 分别用对甲基苯磺酰肼和醋酸硼氢化钠结合的一锅法还原或Pd/C催化氢化还原中间体得到ω-苯基-(2S)-N-叔丁氧羰基氨基酸乙酯.     

水悬浮体系中α,β-环氧酮类化合物的合成研究

在水悬浮体系中使用三氯异氰尿酸/碱氧化体系对α,β-不饱和酮化合物进行环氧化和对烯丙基醇类化合物进行直接氧化-环氧化制备α,β-环氧酮, 考察了表面活性剂、碱等因素对反应的影响. 反应无需有机溶剂, 对于大部分的烯酮和烯丙基醇反应可以在数小时内完成, 产率良好.     

含三唑基的新型咪唑[2,1-b]-1,3,4-噻二唑的合成及表征

以2-(2-苯基-1,2,3-三唑-4-基)-5-氨基-1,3,4-噻二唑(1)为原料分别与ω-溴代芳基乙酮、ω-溴代-ω-(1H-1,2,4-三唑-1-基)芳基乙酮反应, 合成了一系列新型咪唑[2,1-b]-1,3,4-噻二唑类化合物2a～2e和3a～3e. 其结构经IR, ¹H NMR和MS及元素分析确证.     

新型1,2,4-三唑[3,4-b]-1,3,4-噻二嗪的合成及表征

以3-(2-苯基-1,2,3-三唑-4-基)-4-氨基-5-巯基-1,2,4-三唑(1)为原料分别与ω-溴代芳基乙酮、ω-溴代-ω-(1H-1,2,4-三 唑-1-基)芳基乙酮反应, 合成了一系列新的1,2,4-三唑[3,4-b]-1,3,4-噻二嗪类化合物2a～2e和3a～3e. 其结构经IR, ¹H NMR和MS及元素分析确证.     

HAlMCM-41介孔分子筛催化1,3-苯并二噁茂烷合成的研究

研究了HAlMCM-41分子筛催化邻苯二酚与环己酮、丁酮、丙酮、丙醛、丁醛、异丁醛、戊醛、正己醛、正辛醛、苯甲醛、二苯甲酮等十余种醛(酮)的缩合反应. 考察了反应时间、酚与醛(酮)的配比、HAlMCM-41分子筛用量、硅铝比、催化剂重用次数等因素对邻苯二酚与醛(酮)反应的影响. 结果表明, 当邻苯二酚与醛(酮)物质的量比为1∶1.4, 催化剂用量为3.5 g/mol邻苯二酚, 反应4 h, 分子筛n(SiO₂)/n(Al₂O₃)为15时, 选择性一般在99.4%以上, 转化率也一般在85.6%以上, 因此, HAlMCM-41分子筛对邻苯二酚与醛(酮)的反应有较好的催化性能.     

聚-ω-(甲硒基)十一烷基硅氧烷钯(0)配合物的合成与催化性能

ω-氯代十一烷基三乙氧基硅烷依次用气相法二氧化硅固载、与甲硒基钠和氯化钯作用, 再用水合肼还原, 合成了气相法二氧化硅负载的聚-ω-(甲硒基)十一烷基硅氧烷钯(0)配合物. 该钯(0)配合物对丙烯腈和丙烯酸与芳基碘的Heck芳基化反应具有很高的催化活性, 为各种肉桂腈和肉桂酸的立体选择合成提供了方便实用的新途径.     

双(4-吡咯基-1'-苯基)甲烷(醚、砜)的合成及表征

用ω-溴代对氯苯乙酮、ω-溴代对溴苯乙酮和乙酰丙酮为原料, 分别合成了二种3-对卤代苯甲酰甲基-2,4-戊二酮(1a和1b), 进而与芳香二胺2a～2c通过Paal-Knorr反应合成了多取代对称双吡咯3a～3c, 4a～4c, 并通过红外光谱、紫外光谱、质谱、核磁共振氢谱及元素分析对化合物进行了表征.     

不对称合成α-氮杂环丁酮的研究进展

α-氮杂环丁酮是合成培南类抗生素的母核. 作为一类具有生物活性化合物合成子的使用, 促进了其合成方法的研究. 综述了不对称合成氮杂环丁酮的研究进展, 详细讨论了氮杂环丁酮的合成方法.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.