Study of the aggregation of human insulin Langmuir monolayer

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to β-strand and β-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.     

气/液界面Langmuir单分子膜的原位拉曼光谱

提出了一种原位测量气/液界面Langmuir单分子膜拉曼光谱的新方法, 即利用SERS技术, 通过降低亚相的方法来获得气/液界面Langmuir单分子膜的原位拉曼光谱. 利用这种方法, 用原位拉曼光谱测量系统得到了信噪比较好的十八胺及二棕榈酰磷脂酰胆碱单分子膜的拉曼光谱, 在分子水平上获取了单分子膜中的结构信息.     

Mixed monolayers of alkylated azacrown ethers and palmitic acid at the air-water surface

The Langmuir films of two alkylated azacrown ethers at the air-water surface were characterized using surface pressure-area isotherms, ellipsometry, Brewster angle microscopy, and constant-area surface pressure relaxation. The azacrown ether molecules aggregate in the monolayer, which significantly stabilizes the film against dissolution. Mixed azacrown ether-palmitic acid monolayers were also characterized; results suggest that at high compression the two molecules interact repulsively. The influence of Cu(II) ions present in the aqueous subphase on the single components and mixed monolayer characteristics was also studied.     

Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the organophosphorus acid anhydrolase langmuir monolayer

The secondary structure of the organophosphorus acid anhydrolase (OPAA) Langmuir monolayer in the absence and presence of diisopropylfluorophosphate (DFP) in the subphase was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS (PM-IRRAS). The results of both the IRRAS and the PM-IRRAS indicated that the alpha-helix and the beta-sheet conformations in OPAA were parallel to the air-water interface at a surface pressure of 0 mN.m-1 in the absence of DFP in the subphase. When the surface pressure increased, the alpha-helix and the beta-sheet conformations became tilted. When DFP was added to the subphase at a concentration of 1.1 x 10(-5) M, the alpha-helix conformation of OPAA was still parallel to the air-water interface, whereas the beta-sheet conformation was perpendicular at 0 mN.m-1. The orientations of both the alpha-helix and the beta-sheet conformations did not change with the increase of surface pressure. The shape of OPAA molecules is supposed to be elliptic, and the long axis of OPAA was parallel to the air-water interface in the absence of DFP in the subphase, whereas the long axis became perpendicular in the presence of DFP. This result explains the decrease of the limiting molecular area of the OPAA Langmuir monolayer when DFP was dissolved in the subphase.     

Study on the Film Properties and Recognition for Metal Ions of Calix[4]arenes Derivative by Langmuir Monolayer

Calixarene molecules are very powerful ligand for ions and small molecules, and have been studied with several techniques as models for host‐guest systems. In this approach, the formation of Langmuir monolayer properties of three kinds calix[4]arene derivative were characterized and one of them, p‐tert‐butylthiacalix[4]arene (TCA), was chosen as object to study its Langmuir monolayer affected by different subphase conditions. The purpose of this study is to investigate the molecular recognition ability of TCA for metal ions at the water‐air interface. Changing the composition of aqueous subphase (containing various metal ion solutions respectively) produced strong variations on the monolayer parameters, indicating a different selectivity of the TCA ligand for the different metal cations. In particular, high selectivity for transition metal ions was found. Limiting area values are discussed in relation to the orientation of the cone‐shaped molecules at the water‐air interface.     

Use of UV-vis reflection spectroscopy for determining the organization of viologen and viologen tetracyanoquinodimethanide monolayers

UV-vis reflection spectroscopy has been used for proving in situ the organization of pure viologen and hybrid viologen tetracyanoquinodimethanide monolayers at the air-water interface. Other more classical measurements concerning Langmuir monolayers, including surface pressure-area and surface potential-area isotherms, are also provided. The organization of the viologen in the Langmuir monolayer was investigated upon the different states of compression, and the tilt angle of the viologen moieties with respect to the water surface was determined. A gradual transition of the viologen molecules from a flat orientation in the gas phase to a more tilted position with respect to the water surface in the condensed phases occurs. The addition of a tetracyanoquinodimethane (TCNQ) salt in the subphase leads to the penetration of TCNQ anions into the positively charged viologen monolayer forming a hybrid viologen tetracyanoquinodimethanide film where a charge-transfer interaction between the two moieties is observed. From a quantitative analysis of the reflection spectra, an organization model of these hybrid monolayers at the air-water interface is proposed, suggesting a parallel arrangement of viologen and TCNQ units with a 1:2 stoichiometry.     

Surface chemistry and in situ spectroscopy of a lysozyme langmuir monolayer

Surface pressure and surface potential-area isotherms were used to characterize a lysozyme Langmuir monolayer. The compression-decompression cycles and stability measurements showed a homogeneous and stable monolayer at the air-water interface. Salt concentration in the subphase and pH of the subphase were parameters controlling the homogeneity and stability of the Langmuir monolayer. In situ UV-vis and fluorescence spectroscopies were used to verify the homogeneity of the lysozyme monolayer and to identify the chromophore residues in the lysozyme. Optimal experimental conditions were determined to prepare a homogeneous and stable lysozyme Langmuir monolayer.     

Transition from homogeneous Langmuir-Blodgett monolayers to striped bilayers driven by a wetting instability in octadecylsiloxane monolayers

We show that two dips of an oxidized silicon substrate through a prepolymerized n-octadecylsiloxane monolayer at an air-water interface in a rapid succession produces periodic, linear striped patterns in film morphology extending over macroscopic area of the substrate surface. Langmuir monolayers of n-octadecyltrimethoxysilane were prepared at the surface of an acidic subphase (pH 2) maintained at room temperature (22 +/- 2 degrees C) under relative humidities of 50-70%. The substrate was first withdrawn at a high dipping rate from the quiescent aqueous subphase (upstroke) maintained at several surface pressures corresponding to a condensed monolayer state and lowered soon after at the same rate into the monolayer covered subphase (downstroke). The film structure and morphology were characterized using a combination of optical microscopy, imaging ellipsometry, and Fourier transform infrared spectroscopy. An extended striped pattern, perpendicular to the pushing direction of the second stroke, resulted for all surface pressures when the dipping rate exceeded a threshold value of 40 mm min(-1). Below this threshold value, uniform deposition characterizing formation of a bimolecular film was obtained. Under conditions that favored striped deposition during the downstroke through the monolayer-covered interface, we observed a periodic auto-oscillatory behavior of the meniscus. The stripes appear to be formed by a highly correlated reorganization and/or exchange of the first monolayer, mediated by the Langmuir monolayer at the air-water interface. This mechanism appears distinctly different from nanometer scale stripes observed recently in single transfers of phospholipid monolayers maintained near a phase boundary. The stripes further exhibit wettability patterns useful for spatially selective functionalization, as demonstrated by directed adsorptions of an organic dye (fluorescein) and an oil (hexadecane).     

Surface properties of "jellyfish": Langmuir monolayer and Langmuir-Blodgett film studies of recombinant aequorin

In this paper, we studied the surface properties of recombinant aequorin at the air-water interface. Using the Langmuir monolayer technique, the surface properties of aequorin were studied, including the surface pressure and surface potential-area isotherms, compression-decompression cycles, and stability on Trizma Base (Tris/HCl) buffer at pH 7.6. The results showed that aequorin formed a stable Langmuir monolayer and the surface pressure-area isotherms were dependent on both pH and ionic strength. At a pH higher or lower than 7.6, the limiting molecular area decreased. The circular dichroism (CD) spectra of aequorin in aqueous solutions explained this result: when the pH was higher than 7.6, the alpha-helix conformation changed to unordered structures, whereas at a pH lower than 7.6, the alpha-helix conformation changed to beta-sheet. The addition of calcium chloride to the Tris/HCl buffer subphase (pH 7.6) caused an increase of the limiting molecular area of the aequorin Langmuir monolayer. The fluorescence spectra of a Langmuir-Blodgett (LB) film of aequorin in the presence of calcium chloride indicated that the aequorin transformed to the apoaequorin.     

Polymerization of a cysteinyl peptidolipid Langmuir film

The surface pressure-area isotherm of a cysteinyl peptidolipid on a pure water subphase (pH 5.8) was compared with that on a water subphase saturated with oxygen and buffered with ammonium bicarbonate (pH 7.8). A reduction of the limiting molecular area was observed for the isotherm measured on the subphase saturated with oxygen. Hysteresis in the compression-decompression cycles of the Langmuir film was also observed. Taking into consideration the chemical structure of the peptidolipid, we rationalized that the free sulfhydryl groups of the peptidolipid were oxidized in the presence of oxygen in the alkaline subphase to form intermolecular disulfide bonds at the air-water interface. The surface topography of the peptidolipid Langmuir film was observed by epi-fluorescence microscopy and the Langmuir-Blodgett film by environmental scanning electron microscopy (ESEM). The micrographs showed evidence of the polymerization of the cysteinyl peptidolipid at the air-water interface. Furthermore, the XPS spectra of the Langmuir-Blodgett films also proved the existence of disulfide bonds. The control peptidolipid C(18)-Ser-Gly-Ser-OH showed identical surface pressure-area isotherms in the presence or absence of an oxygen-saturated subphase.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Kinetics of Complexation in the Monolayers of Amphiphilic Dicetylcyclene on the Surface of Aqueous Copper(II) Chloride Solutions

The kinetics of complexation in monolayers of dicetycyclene at the surface of aqueous copper(II) chloride solutions was studied. It was shown that the changes in the phase state of monolayer related to the conformational transitions of macrocycle are responsible for the differences in the rate and binding mechanism of copper ions. It was concluded that the sterically more advantageous (for the coordination with the metal ion) conformation of macrocyclic polyamine is ensured in a monolayer. In addition, it was established that the rate and mechanism of complexation in such monolayers greatly depend on the degree of protonation of ligands, the latter being dependent on the subphase pH. It was also demonstrated that an increase in subphase pH to 7 and higher results in an almost total suppression of metal ion binding due to strong conformational distortion of dicetylcyclene macrocycles in a monolayer and the hydrogen bonding between macrocycles.     

Monolayer studies of single-chain polyprenyl phosphates

The monolayer properties of some single-chain polyprenyl phosphates (phytanyl, phytyl, and geranylgeranyl phosphates), which we regard as hypothetical primitive membrane lipids, were investigated at the air-water interface by surface pressure-area (pi-A) isotherm measurements. The molecular area/ pressure at various pH conditions dependence revealed the acid dissociation constants (pKa values) of the phosphate. The pKa values thus obtained at the air-water interface (pKa1 = 7.1 and pKa2 = 9.4 for phytanyl phosphate) were significantly shifted to higher pH than those observed in the bilayer state in water (pKa1 = 2.9 and pKa2 = 7.8). The difference in pKa values leads to a stability of the phosphate as both monolayer and bilayer states in a pH range of 2-6. In addition, the presence of ions such as sodium, magnesium, calcium, and lanthanum in the subphase significantly altered the stability of the polyprenyl phosphate monolayers, as shown by the determination of monolayer collapse and compression/expansion hysteresis. Although sodium ions in the subphase showed only a weak effect on the stabilization of the monolayer, addition of magnesium ions or of a small amount of calcium ions significantly suppressed the dissolution of the monolayer into the subphase and increased its mechanical stability against collapse. In contrast, the presence of larger amounts of calcium or of lanthanum ions induced collapse of the monolayers. Based on these experimental facts, a plausible scenario for the formation of primitive cell membrane by transformation of a monolayer to vesicle structures is proposed.     

The Influence of Macrocyclic Tetraamine Immobilization in Langmuir Monolayers on Complex Formation Selectivity

Selective complex formation in Langmuir dicetyl cyclene monolayers on the surface of aqueous solutions of Cu(II), Ni(II), and Zn(II) salts and their mixtures was studied. The effect of selectivity “inversion” of diphilic cyclene immobilized in monolayers on the surface of solutions of a mixture of copper(II) and nickel(II) salts was observed; the inversion was induced by a change in subphase pH. An analysis of the isotherms of monolayer compression and X-ray fluorescence spectra of the corresponding Langmuir-Blodgett films showed that subphase acidification caused a gradual transition from the selective formation of copper-containing macrocyclic complexes to selective complex formation between the ligand and nickel ions. The effect observed was not characteristic of complex formation with similar unsubstituted tetraamines in bulk solution. The phenomenon was interpreted from the point of view of specific conformational transitions of the diphilic macroring in the two-dimensional system organized at the interphase boundary.     

Structures of palmitoyl-L and DL-lysine monolayers at the air-water interface--polarization modulation infrared reflection absorption spectroscopic study

Polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) was applied to measure the IR spectra of palmitoyl-DL-lysine (L-PL) and palmitoyl-DL-lysine (DL-PL) at the air-water interface. The spectra in the amide I and II regions were simulated by using the extinction coefficients of the amide I and II bands of L-PL and DL-PL determined by the analyses of the IR external reflection spectra of the Langmuir-Blodget (LB) films prepared on a Ge plate (Yasukawa et al. J. Mol. Struct. 2005, 735-736, 53), indicating the angle between the plane of the secondary amide group (the amide plane) and the surface normal in the L-PL monolayer to be about 20 degrees and the angle in the DL-PL monolayer to be about 37 degrees. Comparison of the tilt angles with the corresponding angles in the LB films (about 20 degrees for the LB film of L-PL; about 49 degrees for the LB film of DL-PL) indicated that, upon being transferred to the solid substrate from the air-water interface, the L-PL monolayer keeps the orientation of the amide plane virtually unchanged, while the DL-PL monolayer changes the orientation appreciably to a horizontal direction. The orientation change of the amide plane was interpreted as due to the accommodation of irregularly oriented palmitoyl groups into the LB films of DL-PL on the solid substrate.     

Formation of a DNA layer on Langmuir-Blodgett films and its enzymatic digestion

Here, we report a system we have developed where long double-stranded DNAs (dsDNAs) are immobilized on a monolayer of Zn-arachidate. We have applied the Langmuir-Blodgett technique to form the monolayer of Zn-arachidate where Zn(II) is bound to arachidic acid through charge neutralization. Because tetrahedral Zn(II) participates in DNA recognition through coordination, we have been able to layer DNA over the Zn-arachidate monolayer. The DNA layer shows a typical compression and expansion cycle in a concentration-dependent fashion. Interestingly, the DNA monolayer is available for enzymatic degradation by DNaseI. The detection of DNA and its accessibility towards biological reaction is demonstrated by imaging through fluorescence microscopy. The conformation of the DNA, immobilized on the monolayer, was studied with the help of atomic force microscopy (AFM). We observed that the dsDNAs were aligned in a stretched manner on the surface. To investigate further, we also demonstrate here that the small single-stranded DNA (ssDNA) immobilized on the air-water interface can act as a target molecule for the complementary ssDNA present in the subphase. The study of DNA hybridization done with the help of fluorescence spectroscopy clearly supports the AFM characterization.     

Temperature dependence of poloxamer insertion into and squeeze-out from lipid monolayers

F68, a triblock copolymer of the form poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is found to effectively seal damaged cell membranes. To better understand the molecular interaction between F68 and cells, we have modeled the outer leaflet of a cell membrane with a dipalmitoylphosphatidylcholine (DPPC) monolayer spread at the air-water interface and introduced poloxamer into the subphase. Subsequent interactions of the polymer with the monolayer either upon expansion or compression were monitored using concurrent Langmuir isotherm and fluorescence microscopy measurements. To alter the activity of the poloxamer, a range of subphase temperatures from 5 to 37 degrees C was used. Lower temperatures increase the solubility of the poloxamer in the subphase and therefore lessen the amount of material at the interface, resulting in a lower equilibrium spreading pressure. Additionally, changes in temperature affect the phase behavior of DPPC. Below the triple point, the monolayer is condensed at pertinent polymer insertion pressures; for temperatures immediately above the triple point, the monolayer is a heterogeneous mix of liquid expanded and condensed phase; for the highest temperature measured, the DPPC monolayer remains completely fluid. At all temperatures, F68 inserts into DPPC monolayers at its equilibrium spreading pressure. Upon compression of the monolayer, polymers are squeezed-out at surface pressures notably higher than those for insertion, with higher temperatures leading to a higher squeeze-out pressure. An increase in temperature decreases the solvent quality of water for the poloxamer, lowering solubility of the polymer in the subphase and thus increasing its propensity to be maintained within the monolayer to higher pressures.     

Aggregation behaviors of gemini nucleotide at the air-water interface and in solutions induced by adenine-uracil interaction

Cationic gemini surfactants having nucleotides as counterions (called nucleo-gemini hereafter) were synthesized and their aggregation behavior at air-water surfaces as well as in bulk solutions were studied. Fluid solutions of these nucleo-gemini surfactants show transitions to hydrogels upon addition of complementary nucleoside bases or other nucleo-gemini surfactants having complementary bases as counterions. The FTIR-ATR measurements show that the carboxylate groups of uridine form hydrogen bonds with the amine groups of adenosine. The aggregation behavior was also confirmed at the air-water interface by Brewster angle microscopy as well as surface pressure measurements; the monolayer of a gemini nucleotide was observed to undergo a transition to multilayers when nucleosides with complementary bases were added into the subphase. Isotherm curves of surface pressure monitored in parallel show a decrease in molecular area upon addition of such nucleosides.     

Tunable pK of amino acid residues at the air-water interface gives an L-zyme (langmuir enzyme)

Various amino acid-carrying amphiphiles were synthesized, and the pK values of the attached amino acid residues were investigated at the air-water interface and in aqueous vesicles using pi-A isotherm measurements, (1)H NMR titration, and IR spectroscopy in reflection-adsorption mode. The epsilon-amino group of the Lys residue embedded at the air-water interface displays a significant pK shift (4 or 5 unit) compared with that observed in bulk water, while the pK shift in aqueous vesicles was not prominent (ca. 1 unit). Moreover, pK values of the amino acids at the air-water interface can be tuned simply by control of the subphase ionic strength as well as by molecular design of the amphiphiles. A simple equation based on the dominant contribution by the electrostatic energy to the pK shift reproduces well the surface pressure difference between protonated and unprotonated species, suggesting a reduction in the apparent dielectric constant at the air-water interface. Hydrolysis of a p-nitrophenyl ester derivative was used as a model reaction to demonstrate the use of the Lys-functionalized monolayer. Efficient hydrolysis was observed, even at neutral pH, after tuning of pK for the Lys residue in the monolayer, which is a similar case to that occurring in biological catalysis.