用双硫酯链转移法合成嵌段聚合物

研究了以双硫酯为链转移剂进行的均聚和嵌段共聚物的合成。首先合成大分子链转移剂,得到分子量可控、多分散性系数（PDI）较小（＜1.30）的均聚物。用末端带有双硫酯基因的PSt,PBMA和PBA为链转移剂,加入第二单体聚合得到分子量可控、且PDI较小的两嵌段聚合物。嵌段聚合时必须加入微量的自由基引发剂以形成大分子自由基,达到较好的控制聚合效果。     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .     

用大分子引发剂法制备嵌段共聚物

主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂．然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等．可制得结构可控、分子量分布窄的嵌段共聚物。     

可光、化学降解聚苯乙烯的合成与性能研究

通过1,3-二碘甲基-2-硝基苯与双(2-甲基丙酸)三硫代碳酸酯的高效聚酯化反应合成了主链中含有邻硝基苄酯和三硫代碳酸酯基团的聚合物,以其作为大分子链转移剂,进行苯乙烯的可逆加成断裂链转移(RAFT)聚合,获得了多嵌段聚苯乙烯.大分子链转移剂和多嵌段聚苯乙烯的结构及分子量通过核磁氢谱(1H-NMR)和凝胶渗透色谱(GPC)进行了表征.考察了多嵌段聚苯乙烯溶液和固态的降解性能及热性能.实验结果表明,多嵌段聚苯乙烯不仅在紫外辐照条件下可发生光降解,而且也可通过胺解和水解反应进行降解.热重分析(TGA)和示差扫描量热(DSC)结果显示,邻硝基苄酯基团和三硫代碳酸酯基团的引入,对于多嵌段聚苯乙烯玻璃化转变温度和热稳定性并没有明显的影响.     

新型链转移剂黄原酸酯调控的RAFT自由基聚合

本文综述了以黄原酸酯为链转移剂的共轭乙烯基单体与非共轭乙烯基单体的RAFT自由基聚合研究进展.由于黄原酸酯的Z基团为烷氧基,使得黄原酸酯自由基中心电荷密度增加,通过共轭效应稳定双硫酯产物,因此可以很好地调控非共轭乙烯基单体的活性自由基聚合.在黄原酸酯的Z基团中引入氟原子后,它通过降低加成自由基的稳定性而不是通过稳定双硫酯产物来促进随后的断裂,可以用于共轭乙烯基单体的活性自由基聚合,用含氟的黄原酸酯化合物还可以制备共轭乙烯基单体与非共轭乙烯基单体的嵌段共聚物.     

用ATRP法和RAFT法制备线形嵌段共聚物

嵌段共聚物是将不同性质的聚合物连接在同一分子内，表现出特殊的性质，受到高分子科学家及工业部门的广泛关注。本文简要介绍了嵌段共聚物的结构、性能以及可能的应用。它有多种制备方法，这里着重介绍近年来通过原子转移自由基聚合(ATRP)和可逆加成-裂解链转移(RAFT)法制备嵌段共聚物的研究现状和进展情况。对于加料顺序、大分子引发剂末端基团、单体的反应活性以及大分子引发剂的引发效率、配体种类、大分子链转移剂的链转移常数等对嵌段共聚反应的影响也进行了讨论。     

超临界CO2中苯乙烯RAFT分散聚合

以末端带有三硫代碳酸酯的聚二甲基硅氧烷(PDMS-TTC)为大分子链转移剂,在超临界CO2中通过苯乙烯的可逆加成-断裂链转移(RAFT)聚合制备了聚二甲基硅氧烷-b-聚苯乙烯(PDMS-b-PS)嵌段共聚物,对聚合反应动力学以及产物的组成、分子量和形貌等进行了表征.由于PDMS链段可溶于超临界CO2而PS链段不溶,因此在超临界CO2中制备PDMS-b-PS嵌段共聚物的过程是以嵌段共聚物自身作为分散稳定剂的RAFT分散聚合,产物为粒径较均一的球形颗粒.     

丙烯腈-苯乙烯嵌段共聚物的RAFT聚合与表征

以S,S'-二(α,α '-二甲基-α″-乙酸)三硫代碳酸酯(TRIT)为链转移剂,利用可逆加成断裂链转移自由基聚合(RAFT)制备了窄分布的端羧基大分子链转移剂——聚苯乙烯和聚丙烯腈.以大分子链转移剂为RAFT试剂,引发苯乙烯或丙烯腈单体的RAFT聚合,进一步得到聚丙烯腈-聚苯乙烯-聚丙烯腈(PAN-b-PS-b-PAN)和聚苯乙烯-聚丙烯腈-聚苯乙烯(PS-b-PAN-b-PS)三嵌段共聚物.通过1 H-NMR、FT-IR、凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了袁征,通过原子力显微镜(AFM)和拉曼光谱(Raman)研究了嵌段共聚物薄膜的微相分离结构与热解行为.结果表明:所得产物中除PAN-b-PS-b-PAN外,分子量分布均小于1.2.嵌段共聚物薄膜经250℃热稳定化与600℃热解处理后,碳化并形成了规整的石墨结构,微区尺寸在75 nm左右.     

RAFT法合成两亲性嵌段共聚物PSt-b-PAA-b-PSt及其在离子液体[BMIM][PF_6]中的自组装

用三硫代碳酸二(α,α′-二甲基-α-乙酸)酯(BDATC)作为链转移剂,苯乙烯St作为第一单体,通过可逆加成-断裂链转移聚合(RAFT)方法合成出大分子链转移剂PSt-CTA,以丙烯酸AA作为第二共聚单体合成出3个不同嵌段比的两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸-b-聚苯乙烯(PSt-b-PAA-b-PSt).通过傅里叶变换红外光谱(FTIR)和核磁共振氢谱(1H-NMR)确定了PSt-b-PAA-b-PSt结构,使用凝胶渗透色谱(GPC)测定了大分子引发剂PSt-CTA和嵌段共聚物PSt-b-PAA-b-PSt的分子量及分子量分布.将这3个不同嵌段比的两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐[BMIM][PF6]中进行自组装,用透射电子显微镜(TEM)观察聚合物在离子液体中自组装结构.研究发现,当PSt的链段长度固定时,胶束的自组装形态主要依赖于PAA链的长度.当PAA链段较长时,胶束呈球形;PAA链段变得较短时,胶束的形态则由球形转变为核壳结构,并且胶束形态在25℃至100℃之间不受温度影响.     

PS-b-P4VP两嵌段共聚物的合成及其自组装的研究

双硫酯 (PhC(S)SCH2 Ph)作为链转移剂 ,AIBN作为引发剂 ,用可逆的加成 断裂链转移 (RAFT)活性自由基聚合方法 ,合成了PS大分子链转移剂 .然后在AIBN引发下 ,利用制得的大分子链转移剂 ,以DMF为溶剂 ,80℃下采用RAFT方法 ,合成了PS b P4VP两嵌段共聚物 ,通过核磁共振谱及动力学的研究证明了其活性聚合的特征 .结果表明聚合反应在 2 4h内转化率可达 95 % .并用透射电子显微镜 (TEM )和扫描电子显微镜(SEM)研究了PS b P4VP两嵌段共聚物在选择性溶剂硝基苯 四氢呋喃中的自组装行为 ,研究结果表明改变聚合物的浓度以及选择性溶剂 ,可观察到自组装行为的变化 .     

原子转移自由基聚合制备聚(甲基丙烯酸甲酯-b-苯乙烯)时单体聚合顺序对嵌段效率的影响

采用原子转移自由基聚合研究了聚（ 甲基丙烯酸甲酯 ｂ 苯乙烯） 嵌段共聚物的合成,实验结果表明,当先进行甲基丙烯酸甲酯的聚合,然后再进行苯乙烯的聚合时,得到了完全的嵌段共聚物;反之,如果改变单体的聚合顺序,则嵌段效率很低．用聚合物末端Ｃ—Ｘ（Ｘ＝ Ｃｌ,Ｂｒ） 键的断裂能对实验结果进行了解释．     

Synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid) by reverse iodine transfer polymerization (RITP) in solution and emulsion

Reverse iodine transfer polymerization (RITP), offering the appealing potential of the in situ generation of transfer agents out of molecular iodine I₂, is employed in the synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid). Starting with well‐characterized poly(styrene) as macro‐transfer agents synthesized by RITP, diblock copolymers poly(styrene)‐b‐poly(tert‐butyl acrylate) of various lengths are successfully yielded in solution with a good architectural control. These blocks are then subjected to acid deprotection and subsequent pH control to give rise to anionic amphiphilic poly(styrene)‐b‐poly(acrylic acid). Besides, homopolymers of tert‐butyl acrylate are produced by RITP both in solution and in emulsion. Furthermore, a fruitful trial of the synthesis of diblock copolymers poly(tert‐butyl acrylate)‐b‐poly(styrene) is carried out through chain extension of the poly(tert‐butyl acrylate) latex as a macro‐transfer agent in seeded emulsion polymerization of styrene. Finally, the prepared block copolymer is deprotected to bring about its amphiphilic nature and a pH control caters for its anionic character. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4389–4398     

Synthesis of miktoarm star and miktoarm star block copolymers via a combination of atom transfer radical polymerization and stable free‐radical polymerization

A trifunctional initiator, 2‐phenyl‐2‐[(2,2,6,6‐tetramethyl)‐1‐piperidinyloxy] ethyl 2,2‐bis[methyl(2‐bromopropionato)] propionate, was synthesized and used for the synthesis of miktoarm star AB₂ and miktoarm star block AB₂C₂ copolymers via a combination of stable free‐radical polymerization (SFRP) and atom transfer radical polymerization (ATRP) in a two‐step or three‐step reaction sequence, respectively. In the first step, a polystyrene (PSt) macroinitiator with dual ω‐bromo functionality was obtained by SFRP of styrene (St) in bulk at 125 °C. Next, this PSt precursor was used as a macroinitiator for ATRP of tert‐butyl acrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C, affording miktoarm star (PSt)(PtBA)₂ [where PtBA is poly(tert‐butyl acrylate)]. In the third step, the obtained St(tBA)₂ macroinitiator with two terminal bromine groups was further polymerized with methyl methacrylate by ATRP, and this resulted in (PSt)(PtBA)₂(PMMA)₂‐type miktoarm star block copolymer [where PMMA is poly(methyl methacrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.38). All polymers were characterized by gel permeation chromatography and ¹H NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2542–2548, 2003     

Preparation of PTBA‐PAA‐PMMA Compatibilizer for PET‐PMMA Blends by Atom Transfer Radical Polymerization

The synthesis of diblock copolymer of tert butyl acrylate and methyl methacrylate (PTBA‐b‐PMMA) was prepared by Atom Transfer Radical Polymerization (ATRP). At the outset, macroinitiator of tert butyl acrylate (TBA) was prepared by using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) ligand, Cuprous Bromide (CuBr) catalyst, and ethyl 2‐bromo isobutyrate (2‐EiBBr) initiator. Immediately after the intake of the utmost TBA in the macroinitiator, the second monomer, methyl methacrylate (MMA) was added to the reaction medium, for further polymerization. In these experiments the compositions of the monomers were varied, although the concentrations of ligand, catalyst and the initiator were kept constant. Subsequently, the diblock copolymers were hydrolyzed, under acidic conditions, using HCl catalyst, to obtain an amphiphilic copolymer. These block copolymers were characterized by NMR, IR, GPC, and DSC techniques. These copolymers will be used in, powder coatings, pigment dispersions, and as compatibilizers in polymer blends.     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Improving mechanical properties and chemical resistance of ink‐jet printer color filter by using diblock polymeric dispersants

The diblock copolymers of polystyrene and poly(tert‐butyl acrylate) (PSt‐b‐PtBA) with various molecular weights and hydrophobic/hydrophilic (styrene/acrylic acid) chain length were prepared by atom transfer radical polymerization (ATRP). Selective hydrolysis of the diblock copolymers (PSt‐b‐PtBA) resulted in amphiphilic block copolymers of polystyrene and poly(acrylic acid) (PSt‐b‐PAA). The amphiphilic block copolymers of PSt‐b‐PAA with average molecular weight (M_n) <7500 were proved to be critical in dispersing the pigments of UV curable ink‐jet inks for manufacturing the color filter. Incorporating DB2 diblock copolymer dispersants with styrene/acrylic acid ratio at 1.5 allowed more UV curable compositions in the red and blue inks without deteriorating pigment dispersing stability and jetting properties of the ink‐jet inks. The ink drops can be precisely ejected into the tiny color area. Better properties of the cured red stripe such as nanoindentation hardness and chemical resistance were found. The competing absorption of UV light by the blue pigment hindered the through cure of monomers near the interface between glass substrate and the blue stripe. This leads to lower hardness and poor chemical resistance of the UV cured blue stripe. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3337–3353, 2005     

分子量规整聚p-乙烯基苯甲酸及苯乙烯p-乙烯基苯甲酸两嵌段共聚物的合成

当两嵌段共聚物为由性质不同的规制 (Ｗｅｌｌ ｄｅｆｉｎｅｄ)分子量两链段所构成时 ,在只对其中一链段为良溶剂的选择性溶剂中 ,它能够自组装形成尺寸均一的胶束 .胶束的形态与共聚物的组成、浓度、溶剂的性质等关系密切[1] .因此 ,两嵌段共聚物的合成颇被关注[2 ] .这一性质使得嵌段共聚物在分子识别、药物和其他物质的输送、基因疗法、水系涂料、污染物的除去、催化剂以及传感器等方面展示着潜在的应用前景 .规制分子量的两嵌段共聚合物的合成主要通过阴离子、阳离子、开环易位、基团转移等活性或可控聚合来实现 .但是这些方法受到单体…