Formation of Composites Based on CsHSO<Subscript>4</Subscript> and Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> and Mechanism of Their Protonic Conduction

Vibrational spectra of finely divided amorphous CsHSO₄,Cs₅H₃(SO₄)₄ · H₂O, and composites based on these are measured and analyzed. An analysis of the spectra indicates the occurrence of substantial changes in the system of hydrogen bonds and in the spectral range of the sulfate group of acid sulfates in the composites. Structural dynamics of the SO₄ tetrahedrons is in full conformance with protonic conduction and the data of x-ray diffraction analyses accompanied by differential scanning calorimetry. It is shown that mobility of protons in the composites increases. A mechanism of the formation of the composites and their conduction is proposed.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 640–645.Original Russian Text Copyright © 2005 by Ponomareva, Lavrova, Burgina.     

On the Possibility of Using Protonic Solid Electrolyte CsHSO<Subscript>4</Subscript> in Hydrogen Fuel Cells

Electrochemical parameters of an H₂|air fuel cell with a membrane of solid electrolyte CsHSO₄ or composites (1 − x)CsHSO₄/xSiO₂ (x = 0.1–0.3) and different electrodes are measured at 175 °C. The maximal power (3.5 mW/cm² at a voltage of 0.6 V) is obtained for a cell with platinum-black electrodes and an intermediate layer of a mixture of platinum black and the electrolyte material. In the absence of a platinum catalyst, CsHSO₄ and composites CsHSO₄/SiO₂ are chemically stable in hydrogen at the operating temperature of the fuel cell.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 556–559.Original Russian Text Copyright © 2005 by Lavrova, Russkikh, Ponomareva, Uvarov.     

Features of electrochemical and thermal properties of CsHSO<Subscript>4</Subscript>-C<Subscript>60</Subscript> composite materials

New composite proton-conducting materials based on cesium hydrosulfate with fullerite C₆₀ were synthesized. The concentration dependence of the proton conductivity and thermal properties of synthesized materials with C₆₀ contents from 0 to 50 vol % was studied. It was found that these dependences are nonmonotonic with extrema at C₆₀ contents of ～2 and 30 vol %. The conductivity of the composite material with a C₆₀ content of ～2 vol % is almost twice higher than the conductivity of pure CsHSO₄ due to the formation of a new surface phase, which is confirmed by thermal analysis methods.     

Moderate-temperature protonic conductors based on CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and modified silicon dioxide

With the aim of creating an inert matrix for composite in the (1 ? x) CsH₂PO₄ ? xSiO₂ system, the surface of finely divided dioxide is modified and matrices with more acid centers are produced. Physicochemical properties of composite systems on the basis of these are studied. The role played by acid centers in the formation of more stable and better conductive composite systems in the temperature interval 150 to 250°C is demonstrated. The conductivity of composites based on silicon dioxide modified with CsHSO₄ or H₃PO₄ at 130–230°C is shown to exceed that of the initial phase CsH₂PO₄ and the composite systems based on uniformly porous silicon dioxide with the surface acidity pH ～7 studied previously. The composites are of interest for further research. Compositions of phases under formation and conditions for their existence are determined.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Synthesis,characterization and thermal analysis of polyaniline (PANI)/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> composites

Conducting polyaniline/Cobaltosic oxide (PANI/Co₃O₄) composites were synthesized for the first time, by in situ deposition technique in the presence of hydrochloric acid (HCl) as a dopant by adding the fine grade powder (an average particle size of approximately 80 nm) of Co₃O₄ into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR) and X-ray diffraction (XRD). The composition and the thermal stability of the composites were investigated by TG-DTG. The results suggest that the thermal stability of the composites is higher than that of the pure PANI. The improvement in the thermal stability for the composites is attributed to the interaction between PANI and nano-Co₃O₄.     

LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> and LiCoO<Subscript>2</Subscript> composite cathode materials obtained by mechanical activation

New composite cathode materials xLiMn₂O₄/(1 ? x) LiCoO₂(x = 0.7, 0.6, 0.5 и 0.4) were obtained by mechanical activation. According to scanning electron microscopy data, the process was accompanied by pronounced dispersion and fine mixing of the initial components. In the course of the preparation and electrochemical cycling of the composites, LiMn₂O₄ and LiCoO₂ partially reacted, leading to the replacement of manganese with cobalt in the structure of spinel, which was detected by powder X-ray diffraction (XRD), IR and X-ray photoelectron spectroscopy (XPS), and cyclic chronopotentiometry. The specific discharge capacity of composites was ～100 mAh/g.     

Phase transition of RbH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and its composite with SiO<Subscript>2</Subscript> studied by thermal analysis

The phase transition at T _p (~109 °C) of RbH₂PO₄ and its composite with SiO₂ has been investigated by thermal analysis here. In the case of neat RbH₂PO₄, there is a linear relationship between endothermic peak temperature (T _m) and square root of heating rate (Φ ^1/2), from which the onset temperature of phase transition can be determined. Besides, Kissinger method and another calculation method were employed to obtain the activation energy of phase transition. The detailed deduction process was presented in this paper, and the estimated activation energies are E ₁ ≈ 126.3 kJ/mol and E ₂ ≈ 129.2 kJ/mol, respectively. On the other hand, the heterogeneous doping of RbH₂PO₄ with SiO₂ as dopant facilitates its proton conduction and leads to the disappearance of jump in conductivity at T _p. The heats of transition in the composites decrease gradually with increasing the molar fraction of SiO₂ additives. In the cooling process, a new and broad exothermic peak appeared between ~95 and ~110 °C, and its intensity also changes with the SiO₂ amount. These phenomena might be related to the formation of amorphous phase of RbH₂PO₄ on the surface of SiO₂ particles due to the strong interface interaction.     

Wetting and conductivity of BiVO<Subscript>4</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript> ceramic composites

The conductivity and transport number of oxygen ions of BiVO₄-(5, 7, 10, 12) wt % V₂O₅ ceramic composites are measured using the four-probe and coulomb-volumetric methods, respectively, in the temperature range from 500 to 660°C. The phase transition of wetting of grain boundaries with eutectic melt at 640°C is discovered. It is shown that the grain boundary wetting significantly raises the ionic conductivity of composites.     

Cu<Subscript>4</Subscript>RbCl<Subscript>3</Subscript>I<Subscript>2</Subscript> solid superionic conductor in thermodynamic study of three-component copper chalcogenides

The Cu-B-Se (B = In, As, Sb, Bi) systems are studied by measurement of EMF for concentration circuits vs. a copper electrode in the temperature range of 300–430 K. A solid superionic Cu₄RbCl₃I₂ conductor is used as an electrolyte. Diagrams of solid-phase equilibriums in the studied systems are constructed. Partial molar functions of alloyed copper are calculated on the basis of the equations of the temperature dependences of EMF. Potential-forming reactions corresponding to the measured EMF values are determined on the basis of the phase diagrams and standard thermodynamic formation functions and standard entropies of ternary compounds are calculated.     

Solid-phase synthesis of intermetallic compounds Al<Subscript>13</Subscript>Co<Subscript>4</Subscript>, Al<Subscript>13</Subscript>Fe<Subscript>4</Subscript>, and Al<Subscript>13</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>2</Subscript>

Intermetallic compounds Al₁₃Co₄, Al₁₃Fe₄, and Al₁₃Co₂Fe₂ were obtained by solid-phase synthesis in air at temperatures below 600°C using precursor metals subjected to mechanochemical preactivation. The phase composition of the synthesized aluminides and composites Al₁₃Co₄/SiO₂ and Al₁₃Fe₄/SiO₂ was analyzed.     

Degradation of organic compounds on TiO<Subscript>2</Subscript> photocatalysts prepared by a hydrothermal method in the presence of NH<Subscript>4</Subscript>F

TiO₂ photocatalysts were synthesized by a hydrothermal method from tetraisopropyl orthotitanate (TPOT) in the presence of NH₄F with different NH₄F/Ti molar ratios (0, 0.25, and 1). The formation of a well-crystallized anatase phase of TiO₂ and the suppression of phase transition to rutile were observed, even at high calcination temperature, owing to the effects of NH₄F. The TiO₂ synthesized hydrothermally with NH₄F exhibited absorption with a shift to the longer wavelengths of the visible-light region. The hydrothermally synthesized TiO₂ with a moderate amount of NH₄F exhibited high photocatalytic activity for the degradation of alcohol diluted in water under both UV-light and visible-light irradiations.     

Surface and bulk conduction and thermodynamic properties of ionic salt CsH<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Transport properties of ionic salt CsH₅(PO₄)₂ are studied by the impedance method. The salt’s bulk conductivity ranges from 10^?8 to 10^?4 S cm^?1 in the temperature interval 90 to 145°C. The apparent activation energy is high (1.6–2.0 eV). The conductivity is slightly anisotropic: it is maximum in the [001] direction and minimum in the [100] direction (～5.6 and 1 times × 10^?6 S cm^?1, respectively, at 130°C). The conductivity of polycrystalline samples is higher by 1–2 orders of magnitude, and the activation energy drops to 1.05 eV due to the formation of a pseudoliquid layer with a high proton mobility at the intercrystallite boundary. The salt’s thermodynamic properties are examined by differential scanning calorimetry and thermogravimetry. No phase transitions are discovered in the salt up to the melting point (151.6°C), with the melting enthalpy equal to ～34 kJ mol^?1. The crystallization occurs at lower temperatures (107°C) and the crystallization enthalpy (?18 kJ mol^?1) is lower than the melting enthalpy. The melting is accompanied by slow decomposition of the salt. Factors affecting the proton transport in the salt are analyzed.     

Comparative study of the synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> in silica through the polymerized complex route of the sol–gel method

In this work the synthesis of CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ nanocomposites was studied via the sol–gel method, using the polymerized complex route. The polymerized precursors obtained by the reaction of citric acid, ethylene glycol, tetraethylorthosilicate, ferric nitrate, and cobalt nitrate or nickel chloride were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. NMR and IR spectra of the precursors, without and with metallic ions, show the formation of polymeric chains with ester and ether groups and complexes of metal-polymeric precursor. The nanocomposites were obtained by the thermal decomposition of the organic fraction and characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). XRD patterns show the formation of CoFe₂O₄ and NiFe₂O₄ in an amorphous silica matrix above 400 °C in both cases. When the calcination temperature was 800 °C the particle size of the crystalline phases, calculated using the Scherrer equation, reached ∼35 nm for the two oxides. VSM plots show the ferrimagnetic behavior that is expected for this type of magnetic material; the magnetization at 12.5 KOe of the CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ compounds was 29.5 and 17.4 emu/g, respectively, for samples treated at 800 °C.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Phase-pure nanocrystalline Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> for a lithium-ion battery

Phase-pure nanocrystalline Li₄Ti₅O₁₂ with BET surface areas between 183 and 196 m²/g was prepared via an improved synthetic protocol from lithium ethoxide and titanium(IV) butoxide. The phase purity was proved by X-ray powder diffraction, Raman spectroscopy and cyclic voltammetry. Thin-film electrodes were prepared from two nanocrystalline samples of Li₄Ti₅O₁₂ and one microcrystalline commercial sample. Li-insertion behavior of these electrodes was related to the particle size.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Four-component system LiF-K<Subscript>2</Subscript>WO<Subscript>4</Subscript>-CaF<Subscript>2</Subscript>-BaWO<Subscript>4</Subscript>

The four-component system LiF-K₂WO₄-CaF₂-BaWO₄ has been studied for the first time using physicochemical methods. The a priori prediction of the phase complex revealed the phase tree and crystallization path of the system. The prediction was verified experimentally, by construction of a topologic model of the phase diagram, and the solution of the equations of the general law of liquidus-surface formation. The density has been measured, and the heat-storage properties of eutectic mixtures have been estimated.     

Preparation of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> by polyacrylamide gel processing and its thermoelectric properties

Ca₃Co₄O₉ powder was prepared by a polyacrylamide gel route in this paper. The effect of the processing on microstructure and thermoelectric properties of Ca₃Co₄O₉ ceramics via spark plasma sintering were investigated. Electrical measurement shows that the Seebeck coefficient and conductivity are 170 μV/K and 128 S/cm, respectively, at 700 °C, yielding a power factor value of 3.70 × 10⁻⁴ W m⁻¹ K⁻² at 700 °C, which is larger than that of Ca₃Co₄O₉ ceramics via solid-state reaction processing. The polyacrylamide gel processing is a fast, cheap, reproducible and easily scaled up chemical route to improve the thermoelectric properties of Ca₃Co₄O₉ ceramics by preparing the homogeneous and pure Ca₃Co₄O₉ phase.     

Preparation and characterization of LiFePO<Subscript>4</Subscript> from NH<Subscript>4</Subscript>FePO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O under different microwave heating conditions

Olivine-type LiFePO₄ is a very promising polyanion-type cathode material for lithium-ion batteries. In this work, LiFePO₄ with high specificity capacity is obtained from a novel precursor NH₄FePO₄·H₂O via microwave processing. The grains grow up in the duration of sintering until they reach the decomposition temperature. The apparent conductivity of the samples rises rapidly with the irradiation time and influences the electrochemical performance of the material greatly at high current density. As a result, the LiFePO₄ cathode material obtained with a sintering time of 15 min has good electrochemical performance. Between 2.5 and 4.2 V versus Li, a reversible capacity is as high as 156 mAh g⁻¹ at 0.05 C.