Selective Catalytic Reduction of NO by NH<Subscript>3</Subscript> over MoO<Subscript>3</Subscript> Promoted Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

A series of MoO₃ doped Fe₂O₃ catalysts prepared by the co-precipitation method were investigated in the selective catalytic reduction of NO by NH₃ (NH₃-SCR). The catalysts displayed excellent catalytic activity from 225 to 400°C and high tolerance to SO₂/H₂O poisoning at 300°C. To characterize the catalysts the N₂-BET, XRD, Raman, NO-TPD, NH₃-TPD and in situ DRIFTS were carried out. It was found that the main reason explaining a high NH₃-SCR performance might be the synergistic effect between Fe and Mo species in the catalyst that could enhance the dispersion of Fe₂O₃ and increase NH₃ adsorption on the catalyst surface.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

NH<Subscript>4</Subscript>V<Subscript>3</Subscript>O<Subscript>7</Subscript>: Synthesis,morphology, and optical properties

The effect of the method used for the synthesis of NH₄V₃O₇ on its morphology, textural parameters, and optical properties was studied. Ammonium vanadate NH₄V₃O₇ was prepared by treating NH₄VO₃ in the presence of citric acid under hydrothermal (4.0 ≤ pH ≤ 5.5, T = 180–200°C, 48 h) and microwave–hydrothermal (3.5 ≤ pH ≤ 5.0, T = 180–220°C, 20 min) conditions. Self-assembled NH₄V₃O₇ microcrystals crystallizing in monoclinic system with unit cell parameters a = 12.247(5) Å, b = 3.4233(1) Å, c = 13.899(4) Å, β = 89.72(3)°, and V = 582.3(4) ų (space group P2₁) were shown to be formed independently of the method used to treat the reaction mixture. The morphology of NH₄V₃O₇ particles was shown to depend on рН of the reaction mass and the method of synthesis. The structural features of NH₄V₃O₇ were studied by IR, UV, and Vis spectroscopy, and the optical bandgap was determined.     

Adsorption of NO,NH<Subscript>3</Subscript> and H<Subscript>2</Subscript>O on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalysts

The adsorption of small molecules NO, NH₃ and H₂O on V₂O₅/TiO₂ catalysts is studied with the semiempirical SCF MO method MSINDO as pre-stage for the selective catalytic reduction of NO. The mixed catalyst is represented by hydrogen-terminated cluster models. The local arrangement of the cluster atoms is in accordance with available experimental information. Partial relaxation of cluster atoms near the adsorption sites is taken into account. Calculated adsorption energies are compared with experimental literature data. Rapid convergence of computed properties with cluster size is observed. A possible reaction mechanism for the catalytic reduction of NO with NH₃ and O₂ is outlined.     

Solid Solutions of the System V<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>4</Subscript>-TiO<Subscript>2</Subscript> in Air

Gravimetry in combination with X-ray phase analysis, X-ray crystallography, and X-ray densitometry were used to determine the contents of V⁵⁺, V⁴⁺, and Ti⁴⁺ ions and vacancies in solid solutions formed by the reaction of V₂O₅ with TiO₂ in air at atmospheric pressure.     

Prediction of new A<Subscript>3+</Subscript>B<Subscript>3+</Subscript>C<Subscript>2+</Subscript>O<Subscript>4</Subscript> compounds

Hitherto unprepared ABCO₄ compounds (where A and B stand for tervalent metals (r _A ≥ r _B) and C stands for a divalent metal) are predicted. Criteria are found to predict the possibility for these compounds to crystallize in some type of structure (K₂NiF₄, CaFe₂O₄, YbFe₂O₄, or spinel) at room temperature and atmospheric pressure. The prediction is based only on the properties of elements and simple oxides. A special software system for computer-aided analysis of information is used for calculations involving pattern recognition based on use case.     

Orientational disorder in crystal structures of (NH<Subscript>4</Subscript>)<Subscript>3</Subscript>ZrF<Subscript>7</Subscript> and (NH<Subscript>4</Subscript>)<Subscript>3</Subscript>NbOF<Subscript>6</Subscript>

Crystal structures of (NH₄)₃ZrF₇ (I) and (NH₄)₃NbOF₆ (II) are refined by X-ray diffraction at room temperature. The compounds are isostructural and belong to the structural type of elpasolite: space group F23; a(I) = 9.4185(3) Å, a(II) = 9.3371(5) Å; V(I) = 835.50(5) ų, V(II) = 814.02(8) ų; Z = 4; R(I) = 0.0145, and R(II) = 0.0138. The refinement of the structures in the space group Fm3m yields abnormally short X-X distances in the pentagonal bipyramid MX₇ (X = F, O). The oxygen atom in II is identified by Nb-X distances and occupies one of the axial vertices of the bipyramid. The Nb atom in II is statistically distributed over the position 24f, while Zr in I resides in the symmetry center. The pentagonal bipyramid MX₇ has six independent orientations in I and twelve in II. One of three crystallographically independent ammonium groups of the structures is disordered over six or twelve equivalent orientations.     

Effect of Calcination Temperature on the Structure and Catalytic Properties of MnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Ca<Subscript>2</Subscript>O<Subscript>3</Subscript> in the Reaction of CO and Ethane Oxidation

Effect of the calcination temperature of the MnOx/Ga2O3 system on its structural and catalytic properties in the reaction of oxidation of CO and hydrocarbons. The dependences of the catalytic activity of MnO _x /Ga₂O₃ in the reactions of CO and ethane oxidation on the calcination temperature exhibit an extremal behavior. The maximum values of activity are observed upon calcination of the system at 700°C, i.e., at the temperature that is limiting for the existence of a solid solution of manganese ions in γ-Ga₂O₃. The structural changes occurring with increasing calcination temperature are accompanied by a substantial decrease in the specific surface area of a sample. The observed rise in the specific catalytic activity (by a factor of ~7 upon an increase in the preliminary-calcination temperature from 600 to 800°C) confirms that the thermal activation effect exists for the given system.     

Effect of SO<Subscript>2</Subscript> on chlorination of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mixtures

The reaction of Bi₂O₃ + Fe₂O₃ mixtures with chlorine and SO₂ at 250–700°C is studied. At 300–500°C, the degree of bismuth chloride sublimation from the oxide mixture increases in the presence of SO₂. Chemical sublimation of FeCl₃ occurs after BiCl₃ is virtually completely recovered from the solid phase.     

Catalytic Oxidation of Xylene in Air using TiO<Subscript>2 </Subscript>under Electron Beam Irradiation

The oxidation of xylene and its irradiation byproducts in air using TiO₂ was studied under electron beam (EB) irradiation for the purification of ventilation gases emitted from paint factories. EB irradiation experiments were mainly performed under two different conditions: a TiO₂ pellet layer was placed in an irradiation or a non-irradiation space. The results revealed that xylene was decomposed and CO was formed in the gas phase of the irradiation space irrespective of the presence of TiO₂ pellets, while CO₂ was produced in the gas phase of the irradiation space and on the surface of TiO₂ pellets. The total CO₂ concentration increased when the pellet layer was in the non-irradiation space. On the other hand, the concentration of CO₂ produced on the surface of the TiO₂ pellets in the irradiation space was higher than that in a non-irradiation space.     

Catalytic Properties of TiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles in Plasma Chemical Treatment

We proposed here a new process coupling dielectric barrier discharge (DBD) plasma with magnetic photocatalytic material nanoparticles for improving yield in DBD degradation of methyl orange (MO). TiO₂ doped Fe₃O₄ (TiO₂/Fe₃O₄) was prepared by the sol-gel method and used as a new type of magnetic photocatalyst in DBD system. It was found that the introduction of TiO₂/Fe₃O₄ in DBD system could effectively make use of the energy generated in DBD process and improve hydroxyl radical contributed by the main surface Fenton reaction, photocatalytic reaction and catalytic decomposition of dissolved ozone. Most part of MO (88%) was degraded during 30 min at peak voltage of 13 kV and TiO₂/Fe₃O₄ load of 100 mg/L, with a rate constant of 0.0731 min^?1 and a degradation yield of 7.23 g/(kW h). The coupled system showed higher degradation efficiency for MO removal.     

Study of Fe-doped V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalyst for an enhanced NH<Subscript>3</Subscript>-SCR in diesel exhaust aftertreatment

Selective catalytic reduction (SCR) with ammonia has been considered as the most promising technology, as its effect deals with the NO_X. Novel Fe-doped V₂O₅/TiO₂ catalysts were prepared by sol–gel and impregnation methods. The effects of iron content and reaction temperature on the catalyst SCR reaction activity were explored by a test device, the results of which revealed that catalysts could exhibit the best catalytic activity when the iron mass ratio was 0.05%. It further proved that the VTiFe (0.05%) catalyst performed the best in denitration and its NO_X conversion reached 99.5% at 270 °C. The outcome of experimental procedures: Brunauer–Emmett–Teller surface area, X-ray powder diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction and adsorption (H₂-TPR, NH₃-TPD) techniques showed that the iron existed in the form of Fe³⁺ and Fe²⁺ and the superior catalytic performance was attributed to the highly dispersed active species, lots of surface acid sites and absorbed oxygen. The modified Fe-doped catalysts do not only have terrific SCR activities, but also a rather broad range of active temperature which also enhances the resistance to SO₂ and H₂O.     

Synthesis of (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>SO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O<Subscript>2</Subscript> and methods of its stabilization and storage

Optimal conditions of the synthesis of ammonium sulfate peroxy solvate stabilized by carboxylic acids were developed.     

Solubility in the ternary system CaSO<Subscript>4</Subscript> + Na<Subscript>2</Subscript>SO<Subscript>4</Subscript> + H<Subscript>2</Subscript>O at 298.15 K

The solubility in the ternary system, aqueous mixture of CaSO₄ and Na₂SO₄, at T = 298.15 K comprises five different salts: calcium sulfate dihydrate, mirabilite, thenardite, glauberite and labile salt. Using the Extended Pitzer’s Ion Interaction model for pure and mixed electrolyte solutions and criteria of phase equilibria, predicted solubility behavior of salts was compared with experimental results from literature. The agreement between calculated and experimental solubilities was excellent in the ionic strength range up to 10.9062 mol kg⁻¹.     

Ammonia gas sensor based on a spinel semiconductor,Co<Subscript>0.8</Subscript>Ni<Subscript>0.2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanomaterial

Thick film of nanocrystalline Co_0.8Ni_0.2Fe₂O₄ was obtained by sol–gel citrate method for gas sensing application. The synthesized powder was characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD pattern shows spinel type structure of Co_0.8Ni_0.2Fe₂O₄. XRD of Co_0.8Ni_0.2Fe₂O₄ revels formation of solid solution with average grain size of about 30 nm. From gas sensing properties it observed that nickel doping improves the sensor response and selectivity towards ammonia gas and very low response to LPG, CO, and H₂S at 280 °C. Furthermore, incorporation of Pd improves the sensor response and stability of ammonia gas and reduced the operating temperature upto 210 °C. The sensor is a promising candidate for practical detector of ammonia.     

<Emphasis Type="Italic">In situ</Emphasis> IR Spectroscopic and XPS Study of Surface Complexes and Their Transformations during Ammonia Oxidation to Nitrous Oxide over an Mn-Bi-O/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst

Surface complexes resulting from the interaction between ammonia and a manganese-bismuth oxide catalyst were studied by IR spectroscopy and XPS. At the first stage, ammonia reacts with the catalyst to form the surface complexes [NH] and [NH₂] via abstraction of hydrogen atoms even at room temperature. Bringing the catalyst into contact with flowing air at room temperature or with helium under heating results in further hydrogen abstraction and simultaneous formation of [N] from [NH₂] and [NH]. The nitrogen atoms are localized on both reduced (Mn²⁺) and oxidized (Mn^δ+, 2 < δ < 3) sites. Atomic nitrogen is highly mobile and reacts readily with the weakly bound oxygen of the oxidized (Mn^δ+-N) active site. The nitrogen atoms localized on oxidized sites play the key role in N₂O formation. Nitrous oxide is readily formed through the interaction between two Mn^δ+-N species. N₂ molecules result from the recombination of nitrogen atoms localized on reduced (Mn²⁺-N) sites.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 590–600.Original Russian Text Copyright © 2005 by Slavinskaya, Chesalov, Boronin, Polukhina, Noskov.     

Development of Process for Fast Plasma-Chemical Through Etching of Single-Crystal Quartz in SF<Subscript>6</Subscript>/O<Subscript>2</Subscript> Gas Mixture

Process for deep plasma-chemical etching of single-crystal quartz plates in a SF₆/O₂ gas mixture was developed. The method of scientific experiment design based on the Taguchi matrix technique was used to rank basic technological parameters (bias voltage applied to the substrate holder, output power of the high-frequency generator, oxygen flow rate, and position of the substrate holder relative to the lower edge of the discharge chamber) as regards their influence on the etching rate. The ranking results were used to optimize the plasma-chemical etching process and perform a control experiment on through etching of windows with large linear dimensions (3 × 10 mm) in a single-crystal quartz plate (z-cut) with thickness of 369 μm.     

Comparison of the Solubility of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript>, Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> in High Temperature Water

As the solubility is a direct measure of stability, this study compares the solubilities of ZnFe₂O₄, Fe₃O₄ and Fe₂O₃ in high temperature water. Through literature analysis and formula derivation, it is shown that it is reasonable to assume ZnFe₂O₄ and Fe(OH)₃ coexist when ZnFe₂O₄ is dissolved in water. Results indicated that the solubility of ZnFe₂O₄ is much lower than that of Fe₂O₃ or Fe₃O₄. The low solubility of ZnFe₂O₄ indicates that it is more protectively stable as an anticorrosion phase. Moreover, the gap between the solubility of ZnFe₂O₄ and that of Fe₃O₄ or Fe₂O₃ was enlarged with an increase of temperature. This means that ZnFe₂O₄ is more protective at higher temperatures. Further analysis indicated that with the increase of temperature, the solubility of ZnFe₂O₄ changed little while those of Fe₂O₃ or Fe₃O₄ changed a lot. Little change of the solubility of ZnFe₂O₄ with increase of temperature showed that ZnFe₂O₄ is stable. The very low and constant solubility of ZnFe₂O₄ suggests that it is more protective than Fe₂O₃ and Fe₃O₄, especially in water at higher temperature.