Synthesis of bioactive heterocycles using reusable heterogeneous catalyst HClO4–SiO2 under solvent-free conditions

We are reporting a simple, efficient and green protocol for the synthesis of chromenes and dihydropyrimidines (products of Knoevenagel and Biginelli reaction, respectively) by the use of silica-supported perchloric acid (HClO₄–SiO₂) as an effective heterogeneous catalyst. Short reaction times, high product yields, simple procedure and reusability of the catalyst are the superior characteristics of this protocol.     

An efficient protocol for regioselective ring opening of epoxides using sulfated tungstate: application in synthesis of active pharmaceutical ingredients atenolol,propranolol and ranolazine

Sulfated tungstate was found to be a new and highly efficient catalyst for opening of epoxide rings by amines to give β-amino alcohols with high regioselectivity. Various advantages associated with this novel and environmental friendly protocol include solvent-free conditions, short reaction times, high product yields, simple workup procedure and easy recovery and reusability of the catalyst. This protocol has been applied for the synthesis of active pharmaceutical ingredients atenolol, propranolol and ranolazine.     

Tetrabutylammonium phthalimide-N-oxyl: An efficient organocatalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

Tetrabutylammonium phthalimide-N-oxyl (TBAPINO) was found to be an effective organocatalyst for rapid, simple and chemoselective protection of the hydroxyl group of alcohols and phenols using hexamethyldisilazane (HMDS) under mild conditions. The low catalyst loading, high to quantitative yields and simple removal of the catalyst from the reaction mixture illustrate the other attractive features of this protocol.     

Aqueous media preparation of 2-amino-4,6-diphenylnicotinonitriles using cellulose sulfuric acid as an efficient catalyst

A convenient approach to the synthesis of 2-amino-4,6-diphenylnicotinonitriles via four-component reaction of aromatic aldehydes, acetophenone derivatives, malononitrile and ammonium acetate is described. The reactions were done in water as solvent using cellulose sulfuric acid as catalyst. This simple protocol offer advantages such as shorter reaction times, simple work-up procedure, excellent yields and catalyst recovery.     

Copper(II) acetate-catalyzed one-pot conversion of aldehydes into primary amides through a Beckmann-type rearrangement

Copper(II) acetate is a versatile catalyst for the direct transformation of any type of aldehydes into primary amides by stoichiometric reaction with hydroxylamine in water. The catalyst could be recovered 10 times without losing its activity, just by a simple organic layer extraction of the product. The catalyst and the protocol avoid the use of any type of expensive and difficult to handle organic ligand, as well as bases, showing excellent yields, under mild reaction conditions. The great purity of the crude product permits its purification by a simple recrystallization process. The whole protocol fulfils the principle of green chemistry and sustainability, minimizing the use of organic solvents and any type of wastes.     

One-pot synthesis of pyrrolo[1,2-a]quinoxaline and pyrrolo[1,2-a]pyrazine derivatives via the three-component reaction of 1,2-diamines,ethyl pyruvate and α-bromo ketones

A simple synthetic protocol has been developed involving the three-component reaction between 1,2-diamines, ethyl pyruvate and a-bromo ketones in the presence of Fe Cl3 as a catalyst. A number of pyrrolo[1,2-a]quinoxaline and pyrrolo[1,2-a]pyrazine derivatives were synthesized in excellent yields using this protocol.     

1-(1-Alkylsulfonic)-3-methylimidazolium chloride as a reusable Brønsted acid catalyst for the regioselective azidolysis of epoxides under solvent-free conditions

In this study, 1-(1-alkylsulfonic)-3-methylimidazolium chloride as a new, green, and reusable Brønsted acid catalyst was prepared. In this protocol, we used for the regioselective ring-opening reactions of various epoxiodes with sodium azide to afford the corresponding β-azido alcohols in excellent yields and short reaction time under mild and neutral reaction conditions. This method offers several advantages including excellent regioselectivity, clean reactions, simple work-up procedure, a recyclable catalyst, and use of an eco-friendly catalyst.     

Synthesis of 5-substituted 1H-tetrazoles catalyzed by ceric ammonium nitrate supported HY-zeolite

In this Letter we wish to report a simple and efficient synthetic protocol for the synthesis of 5-substituted 1H-tetrazole derivatives through the [2+3] cycloaddition of nitriles with sodium azide using ceric ammonium nitrate supported HY-zeolite as a novel catalyst. Excellent yields of the corresponding tetrazoles were obtained through this cost-effective protocol under aerobic conditions with shorter reaction time under mild reaction conditions.     

Piperidine-Iodine as Efficient Dual Catalyst for the One-Pot,Three-Component Synthesis of Coumarin-3-Carboxamides

A simple and efficient one-pot, three-component synthetic method for the preparation of coumarin-3-carboxamides was carried out by the reaction of salicylaldehyde, aliphatic primary/secondary amines, and diethylmalonate. The protocol employs piperidine-iodine as a dual system catalyst and ethanol, a green solvent. The main advantages of this approach are that it is a metal-free and clean reaction, has low catalyst loading, and requires no tedious workup.     

Boehmite@SiO2@ Tris (hydroxymethyl)aminomethane-Cu(I): a novel,highly efficient and reusable nanocatalyst for the C-C bond formation and the synthesis of 5-substituted 1H-tetrazoles in green media

In this work, a versatile protocol was introduced for the preparation of a new Cu(I) supported complex on Silica supported boehmite nanoparticles (Boehmite@SiO₂@Tris-Cu(I)). The structure of the catalyst was comprehensively characterized using Fourier transform infrared spectroscopy (FT-IR), X-Ray Diffractometer (XRD), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma atomic emission spectroscopy (ICP), X-ray mapping, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) techniques. The catalytic activity of this catalyst was studied in the Suzuki cross-coupling reaction and synthesis of 5-substituted 1H-tetrazole derivatives in ethanol and PEG-400 respectively as green solvents. In this sense, simple preparation of the catalyst from the commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, it is worth mentioning that this nanocatalyst was easily recovered, and reused for several times without significant loss of its catalytic efficiency. In addition, stability of the catalyst after recycling was confirmed by FT-IR technique.     

A heterogeneous and reusable nanopolymer-supported palladium catalyst for the copper- and phosphine-free Sonogashira coupling reaction under aerobic conditions in water

We report here the synthesis of a nanopolymer-supported palladium(II) complex catalyst, [PS-tet-Pd(II)] using a simple protocol. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, and energy dispersive X-ray spectroscopy (EDS). PS-tet-Pd(II) proves to be a useful heterogeneous catalyst in the copper- and phosphine-free Sonogashira coupling reaction in water. The catalyst can be recovered from the reaction mixture by simple filtration and reused several times without any significant loss of catalytic activity.     

Efficient One-Pot Synthesis of Polyhydroquinoline Derivatives Using Silica Sulfuric Acid as a Heterogeneous and Reusable Catalyst Under Conventional Heating and Energy-Saving Microwave Irradiation

An efficient Hantzsch four-component condensation reaction for the synthesis of polyhydroquinoline derivatives was reported under two conditions: solvent-free conventional heating and energy-saving microwave irradiation. The process is simple and environmentally benign, and the use of a heterogeneous and reusable catalyst, high yields, and short reaction times are the key features of this protocol.     

Xanthan sulfuric acid: An efficient and biodegradable solid acid catalyst for the synthesis of bis(indolyl)methanes under solvent-free conditions

Xanthan sulfuric acid (XSA) is found to be an efficient catalyst for the electrophilic substitution reaction of indole with aromatic aldehydes to afford the corresponding bis(indolyl)methanes at room temperature under solvent-free conditions. The catalyst was characterized for the first time with the help of powder XRD, SEM–EDX and DSC–TGA. The attractive features of this green, new methodology are excellent yield of products, clean reaction profile, reusability of the catalyst, energy sustainable protocol, simple experimental and easier work-up procedures.     

Highly efficient ring opening reactions of epoxides with deactivated aromatic amines catalyzed by heteropoly acids in water

Heteropoly acid was found to be an effective and efficient catalyst for the ring opening reaction of epoxides with various aromatic amines to produce the corresponding β-amino alcohols in moderate to excellent yields in water. This method provides a new and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple work-up procedure.     

Green and highly efficient synthesis of pyranopyrazoles in choline chloride/urea deep eutectic solvent

A simple and efficient multicomponent protocol, using ammonium deep eutectic solvent as a dual catalyst and environmentally benign reaction medium, is developed for the synthesis of dihydropyrano[2,3-c]pyrazole derivatives. This operationally simple protocol does not involve tedious workup or purification, affording the target compounds in short reaction times and excellent yields and avoiding the use of environmentally hazardous solvents and catalysts.     

Three component reactions：An efficient and green synthesis of 3, 4-dihydropyrimidin-2-(1H)-ones and thiones using silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones and thiones promoted by a green catalyst,silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate,has been developed.The use of nontoxic,thermally stable and inexpensive amino acid catalyst makes the process simple with minimal amount of chemical waste.Compared with classical Biginelli reaction conditions,this new method has the advantages of high yields and simple workup procedures.     

A convenient one-pot three component synthesis of 3-aminoalkylated indoles catalyzed by 3-chlorophenylboronic acid

An efficient protocol was developed for the synthesis of 3-aminoalkylated indoles using 3-chlorophenylboronic acid as a catalyst under ambient temperature conditions. The three-component reaction of indoles, aromatic aldehydes and N-methyl aniline offered corresponding 3-aminoalkylated indoles in excellent yields. This protocol presents some remarkable features such as mild reaction conditions, simple workup procedure and excellent yields.     

Selective hydroformylation–acetalization of various olefins using simple and efficient Rh-phosphinite complex catalyst

A simple and efficient Rh-phosphinite complex catalyst was studied for the selective hydroformylation of various olefins. The influence of various reaction parameters including the effect of temperature, pressure, catalyst loading, time, and solvents was studied. The protocol was also applied for the synthesis of various acetals via tandem hydroformylation–acetalization of olefins in alcohols as solvents. High activity and selectivity for acetal formation was achieved in the absence of co-catalysts with admirable substrate to catalyst mole ratio (TON 2500). The developed protocol works for a wide range of olefins to synthesize corresponding aldehydes and acetals under optimized reaction conditions.     

Oxygen-promoted Pd/C-catalyzed Suzuki–Miyaura reaction of potassium aryltrifluoroborates

A simple and highly efficient protocol has been developed for the Pd/C-catalyzed ligand-free Suzuki–Miyaura reaction of potassium aryltrifluoroborates. In this catalytic system, the results demonstrate that oxygen plays a positive role in the cross-coupling reaction. In addition, this catalytic system could be successfully applied to synthesize biaryl compounds containing a carbazole moiety and the catalyst was recycled seven times without significant loss of catalytic activity.     

Simple and efficient approach for synthesis of hydrazones from carbonyl compounds and hydrazides catalyzed by meglumine

A simple, environmentally benign protocol for synthesis of hydrazones from carbonyl compounds and hydrazides has been developed in the presence of meglumine in aqueous-ethanol media at room temperature. The salient features of the present protocol are mild reaction conditions, short reaction time, high yields, operational simplicity, metal-free, applicability toward large-scale synthesis, and biodegradable and inexpensive catalyst.