Time-series analysis of pressure fluctuations in gas–solid fluidized beds – A review

This work reviews methods for time-series analysis for characterization of the dynamics of gas–solid fluidized beds from in-bed pressure measurements for different fluidization regimes. The paper covers analysis in time domain, frequency domain, and in state space. It is a follow-up and an update of a similar review paper written a decade ago. We use the same pressure time-series as used by Johnsson et al. (2000). The paper updates the previous review and includes additional methods for time-series analysis, which have been proposed to investigate dynamics of gas–solid fluidized beds. Results and underlying assumptions of the methods are discussed.     

X-ray measurements on the influence of optical probes on gas–solid fluidized beds

1. Download : Download full-size image

     

Characterization of gas–solid fluidized bed hydrodynamics by vibration signature analysis

Vibration measurement, as a non-intrusive technique, was used to characterize the hydrodynamics of fluidized beds. A series of experiments were performed in a lab-scale fluidized bed using two accelerometers for measuring the vibration of the bed and a pressure probe for measuring pressure fluctuations. The output signals were analyzed by statistical methods. The results show that the vibration technique can predict transition velocities at high velocities and indicate that analyzing the vibration signals can be an effective non-intrusive technique to characterize the hydrodynamics of fluidized beds. It was shown that transition from bubbling to turbulent velocity can be determined from the variation of standard deviation and kurtosis of vibration signals against superficial gas velocity of the bed. However, this point could be determined only from standard deviation of pressure fluctuations, and not from skewness or kurtosis of pressure fluctuations.     

Gas–liquid mass transfer in the gas–liquid–solid mini fluidized beds

The gas–liquid–solid mini fluidized bed (GLSMFB) combines the advantages of fluidized bed and micro-reactor, and meets the requirements for safety and efficiency of green development of process industry. However, there are few studies on its flow performance and no studies on its mass and heat transfer performance. In this paper, the characteristics of gas–liquid mass transfer in a GLSMFB were studied in order to provide basic guidance for the study of GLSMFB reaction performance and application. Using CO₂ absorption by NaOH as the model process, the gas–liquid mass transfer performance of GLSMFB was investigated. The results show that the liquid volumetric mass transfer coefficient and the gas–liquid interfacial area both increase with the increase of the superficial gas velocity within the experimental parameter range under the same given superficial liquid velocity. At the same ratio of superficial gas to liquid velocity, the liquid volumetric mass transfer coefficient increases with the increase of the superficial liquid velocity. Fluidized solid particles strengthen the liquid mass transfer process, and the liquid volumetric mass transfer coefficient is about 13% higher than that of gas–liquid mini bubble column.     

Statistical diagnosis of a gas–solid fluidized bed using Electrical Capacitance Tomography

Fluidization experiments were performed using several particle size distributions of spherical glass particles, ranging from Geldart B to D. An Electrical Capacitance Tomography (ECT) tomograph was utilized in the present study and its usefulness as a diagnostic tool is illustrated. During the experiments a 10.4 cm diameter column was utilized and the column was operated at atmospheric pressure and room temperature (cold fluidized bed). Statistical analyses were performed on the average solid fraction data obtained using the ECT tomograph. Using the time domain skewness and kurtosis the time series could be characterised and the quality of fluidization is determined at different superficial gas velocities (Azizpour, H., Sotudeh-Gharebagh, R., Zarghami, R., Abbasi, M., Mostoufi, N., Mahjoob, M., 2011. Characterization of gas–solid fluidized bed hydrodynamics by vibration signal analysis. International Journal of Multiphase Flow, 37, 788–793). Statistical analysis is also used to characterise the influence of small particles on the bed hydrodynamics.     

A new drag model for TFM simulation of gas–solid bubbling fluidized beds with Geldart-B particles

In this work, a new drag model for TFM simulation in gas–solid bubbling fluidized beds was proposed, and a set of equations was derived to determine the meso-scale structural parameters to calculate the drag characteristics of Geldart-B particles under low gas velocities. In the new model, the meso-scale structure was characterized while accounting for the bubble and meso-scale structure effects on the drag coefficient. The Fluent software, incorporating the new drag model, was used to simulate the fluidization behavior. Experiments were performed in a Plexiglas cylindrical fluidized bed consisting of quartz sand as the solid phase and ambient air as the gas phase. Comparisons based on the solids hold-up inside the fluidized bed at different superficial gas velocities, were made between the 2D Cartesian simulations, and the experimental data, showing that the results of the new drag model reached much better agreement with experimental data than those of the Gidaspow drag model did.     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

Experimental study on reactor performance of gas–solids low-velocity fluidized beds

Reactor performance of bubbling fluidized bed (BFB) and turbulent fluidized bed (TFB) was carefully examined and systematically compared using catalytic ozone decomposition as a model reaction, based on a complete mapping of local flow structures and spatial distributions of ozone conversion and solids holdup. TFB clearly has a higher conversion and shows better reactor performance than BFB as a result of the vigorously turbulent flow and the relatively homogeneous gas–solids mixing in TEB. Besides, the intensive interaction between gas and solids in TFB leads to greater gas–solids contact efficiency of TFB over that of BFB. Due to gas bypassing and backmixing caused by bubbling behaviours and two-phase structure, BFB deviates significantly from a plug flow reactor and sometimes from a continuously stirred tank reactor. The flow structures essentially dictate the reactor performance in the low-velocity fluidized beds.     

A novel dual-material probe for in situ measurement of particle charge densities in gas–solid fluidized beds

Particle charge density is vitally important for monitoring electrostatic charges and understanding particle charging behavior in fluidized beds. In this paper, a dual-material probe was tested in a gas–solid fluidized bed for measuring the charge density of fluidized particles. The experiments were conducted in a two-dimensional fluidized bed with both single bubble injection and freely bubbling, at various particle charge densities and superficial gas velocities. Uniformly sized glass beads were used to eliminate complicating factors at this early stage of probe development. Peak currents, extracted from dynamic signals, were decoupled to determine charge densities of bed particles, which were found to be qualitatively and quantitatively consistent with charge densities directly measured by Faraday cup from the freely bubbling fluidized bed. The current signals were also decoupled to estimate bubble rise velocities, which were found to be in reasonable agreement with those obtained directly by analyzing video images.     

Orientation of cylindrical particles in gas–solid circulating fluidized bed

The orientation of cylindrical particles in a gas–solid circulating fluidized bed was investigated by establishing a three-dimensional Euler–Lagrange model on the basis of rigid kinetics, impact kinetics and gas–solid two-phase flow theory. The resulting simulation indicated that the model could well illustrate the orientation of cylindrical particles in a riser during fluidization. The influences of bed structure and operation parameters on orientation of cylindrical particles were then studied and compared with related experimental results. The simulation results showed that the majority of cylindrical particles move with small nutation angles in the riser, the orientation of cylindrical particles is affected more obviously by their positions than by their slenderness and local gas velocities. The simulation results well agree with experiments, thus validating the proposed model and computation.     

Evaluation of the dimensionless groups based scale-up of gas–solid spouted beds

In this work, the scale-up methodology of He et al. (1997) that is based on maintaining similar or close dimensionless groups in gas–solid spouted beds has been evaluated. Two geometrically similar spouted beds of 0.152 m and 0.076 m diameter have been used. It has been demonstrated experimentally, that there is non-similarity in the local hydrodynamic parameters such as solids holdup and dimensionless solids velocity, when all the dimensionless groups have been matched or close to each other in the two studied spouted beds. This confirms that the global hydrodynamic parameters should not be used to confirm the validity of or to evaluate the dimensionless groups scale-up based methodologies.     

Two-fluid modeling of Geldart A particles in gas–solid micro-fluidized beds

The fluidization behavior of Geldart A particles in a gas–solid micro-fluidized bed was investigated by Eulerian–Eulerian numerical simulation. The commonly used Gidaspow drag model was tested first. The simulation showed that the predicted minimum bubbling velocities were significantly lower than the experimental data even when an extremely fine grid size (of approximately one particle diameter) was used. The modified Gibilaro drag model was therefore tested next. The predicted minimum bubbling velocity and bed voidage were in reasonable agreement with the experimental data available in literature. The experimentally observed regime transition phenomena from bubbling to slugging were also reproduced successfully in the simulations. Parametric studies indicated that the solid-wall boundary conditions had a significant impact on the predicted gas and solid flow behavior.     

Simulations of vertical jet penetration using a filtered two-fluid model in a gas–solid fluidized bed

The influence of a vertical jet located at the distributor in a cylindrical fluidized bed on the flow behavior of gas and particles was predicted using a filtered two-fluid model proposed by Sundaresan and coworkers. The distributions of volume fraction and the velocity of particles along the lateral direction were investigated for different jet velocities by analyzing the simulated results. The vertical jet penetration lengths at the different gas jet velocities have been obtained and compared with predictions derived from empirical correlations; the predicted air jet penetration length is discussed. Agreement between the numerical simulations and experimental results has been achieved.     

CFD simulation of a gas–solid fluidized bed with two vertical jets

A computational fluid dynamics (CFD) model is used to investigate the hydrodynamics of a gas–solid fluidized bed with two vertical jets. Sand particles with a density of 2660 kg/m³ and a diameter of 5.0 × 10^?4 m are employed as the solid phase. Numerical computation is carried out in a 0.57 m × 1.00 m two-dimensional bed using a commercial CFD code, CFX 4.4, together with user-defined Fortran subroutines. The applicability of the CFD model is validated by predicting the bed pressure drop in a bubbling fluidized bed, and the jet detachment time and equivalent bubble diameter in a fluidized bed with a single jet. Subsequently, the model is used to explore the hydrodynamics of two vertical jets in a fluidized bed. The computational results reveal three flow patterns, isolated, merged and transitional jets, depending on the nozzle separation distance and jet gas velocity and influencing significantly the solid circulation pattern. The jet penetration depth is found to increase with increasing jet gas velocity, and can be predicted reasonably well by the correlations of Hong et al. (2003) for isolated jets and of Yang and Keairns (1979) for interacting jets.     

Apparent viscosity of mixed particle system in pulsed gas–solid separation fluidized bed

The apparent viscosity reflects the resistance of the fluidized medium in the bed to the beneficiation particles, which directly affects the separation time and mismatch content. So, the falling-ball method was used to measure the apparent viscosity of a binary medium in a pulsed fluidized bed by varying the gas velocity, pulsation frequency, and fine particle content. The results show that with increasing gas velocity and fine particle content, the apparent viscosity of the bed gradually decreased, whereas it first decreased and then increased with pulsation frequency increasing and achieved a minimum value in the range of 4–6 Hz. Within limits, the adjustment of gas velocity and fine content can effectively reduce the apparent viscosity and improve the separation process. A model for predicting the apparent viscosity in a pulsation separation fluidized bed was established with good accuracy.     

Modified correlation for minimum fluidization velocity of low-density particles in inverse liquid–solid fluidized beds

The minimum fluidization velocity (U_mf) is a key parameter for the scale-up of inverse liquid–solid fluidized beds. Theoretical predictions using common correlations were compared against experimental minimum fluidization velocity measurements of low density (28–638 kg/m³), 0.80–1.13 mm Styrofoam particles in a fluidized bed with a height of 4.5 m and 0.2 m diameter. The average absolute relative deviation for the predicted minimum fluidization velocity for particles below 300 kg/m³ was above 40% using the studied common correlations. A modified Wen and Yu correlation was thus proposed based on novel and past measurements with low-density and small-diameter particles, expanding the range for predicting U_mf. The new correlation predicted U_mf with deviations below 15% for ST028, ST122 and ST300. This modified correlation also improved U_mf predictions for comparable particles from a previous study, demonstrating its validity for a larger range of low-density particles.     

Effect of structure parameters on forces acting on baffles used in gas–solids fluidized beds

Effects of some important structural parameters, i.e. slat pitch, and layout position, on dynamic forces acting on the baffles were examined in the fluidized bed of FCC particles operating under different superficial gas velocities. The experimental baffles were made of multiple inclined slats. We found that the forces acting on the baffles decreased significantly with reducing pitch between the slats. For the baffles with a small slat pitch, the forces acting on the baffles increased slightly and then decreased with increasing superficial gas velocity, which is very different from the measured results of a single slat or tube immersed in fluidized beds. The different results are greatly related to the appearance of the “gas cushion” beneath the baffles, whose height increases with increasing superficial gas velocity. On the other hand, a region with stronger particle circulation induced by the inclined slat array was observed in the experiments. The slat near the wall and located below the region of downward-flowing particles was found to be subjected to the severest forces. Therefore, the slats located in similar locations of industrial baffles are suggested to be reinforced to increase their structural strength.     

Euler-Euler CFD modeling of fluidized bed＂ Influence of specularity coefficient on hydrodynamic behavior

Euler-Euler two-fluid model is used to simulate the hydrodynamics of gas-solid flow in a bubbling flu- idized bed with Geldert B particles where the solid property is calculated by applying the kinetic theory of granular flow （KTGF）. Johnson and Jackson wall boundary condition is used for the particle phase, and different amount of slip between particle and wall is given by varying the specularity coefficient （φ） from 0 to 1. The simulated particle velocity, granular temperature and particle volume fraction are compared to investigate the effect of different wall boundary conditions on the hydrodynamic behavior, Some of the results are also compared with the available experimental data from the literature. It was found that the model predictions are sensitive to the specularity coefficient. The hydrodynamic behavior deviated sig- nificantly for φ = 0 and φ = 0.01 with maximum deviation found at φ = 0 i.e. free-slip condition. However, the overall bed height predicted by all the conditions is similar.     

Numerical investigations on gas–solid flow in circulating fluidized bed risers using a new cluster-based drag model

A cluster-based drag model is proposed for the gas–solid circulating fluidized bed (CFB) riser by including the cluster information collected from image processing and wavelet analysis into the calculation of system drag. The performance of the proposed drag model is compared with some commonly used drag models. A good agreement with the experimental data is achieved by the proposed cluster-based drag model. Error analysis of the proposed cluster-based drag model based on the local distributions of solids holdup and particle velocity is conducted. The clustering phenomenon in the low-density and high-density CFB risers and the effect of the cluster size on the simulation accuracy are also numerically studied by the proposed drag model.