Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

Experimental and theoretical studies of a silver complex of O-functionalized N-heterocyclic carbene

Experimental and theoretical studies of a silver complex namely, [1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazol-2-ylidene]AgCl (1b), supported over an O-functionalized N-heterocyclic carbene ligand are reported. Specifically, [1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazol-2-ylidene]AgCl (1b) was synthesized by reaction of 1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazolium chloride 1a with Ag₂O in 42% yield. The 1-i-propyl-3-(2-oxo-2-t-butyl ethyl)imidazolium chloride 1a was synthesized by the alkylation reaction of 1-i-propylimidazole with α-chloropinacolone in 70% yield. The molecular structures of 1a and 1b have been determined by X-ray diffraction. Detailed theoretical investigation has been performed using the density functional theory method with the B3LYP functional. Bonding in 1b has been probed with the help of charge decomposition analysis (CDA), atoms in molecule (AIM) approach as well as natural bond orbital (NBO) methods. The Ag-NHC bond has a dominantly covalent character with NHC acting as an effective σ-donor. The π-back-bonding from the metal to the ligand was found to be negligible.     

Palladium complexes of amido-functionalized N-heterocyclic carbenes as effective precatalysts for the Suzuki-Miyaura C-C cross-coupling reactions of aryl bromides and iodides

A series of air-stable, robust and highly active palladium based precatalysts of amido-functionalized N-heterocyclic carbenes for the Suzuki-Miyaura C-C cross-coupling reaction has been designed. In particular, the [1-R-3-{N-(benzylacetamido)imidazol-2-ylidene]₂PdCl₂ [R = i-Pr (1c) and CH₂Ph (2c)] complexes efficiently carried out the Suzuki-Miyaura coupling of the aryl bromide and iodide substrates with phenyl boronic acid in good to excellent yields in air at 90 °C in 12 h. Quite interestingly, of these palladium precatalysts, the i-propyl derivative (1c) exhibited superior activity as compared to the benzyl derivative (2c). The density functional theory (DFT) studies carried out on the 1c and 2c complexes revealed the strong σ-donating nature of the NHC ligand as reflected in their high d/b ratio [i.e. forward σ-donation (d) to backward π-donation (b)] of these complexes and, thus, point towards greater stability of the Pd-NHC interaction in these complexes.     

Synthesis of l-aminohomohistidine (l-Ahh)

A short synthesis of l-aminohomohistidine (l-Ahh), which starts from readily available δ-hydroxy-l-lysine is described. The embedding of the basic guanidino moiety in the aromatic imidazole lowers the basicity of the side chain to a pK_a of 8.3. It is proposed that l-Ahh may be employed as an arginine-mimetic in medicinal chemistry.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

Synthesis of high-molecular-weight poly(l-lactic acid) through the direct condensation polymerization of l-lactic acid in bulk state

A strategy was attempted to produce high-molecular-weight poly(l-lactic acid) (PLLA) through the direct condensation polymerization of l-lactic acid in bulk state. Polymerizations were carried out with titanium(IV) butoxide (TNBT) as a catalyst employing different duration of decompression, esterification and polycondensation. The molecular weights were characterized by using the gel permeation chromatography (GPC). The stereosequences were analyzed from the ¹³C NMR spectra on the basis of the triad fractions.     

Copper-free and amine-free Sonogashira coupling in air in a mixed aqueous medium by palladium complexes of N/O-functionalized N-heterocyclic carbenes

Highly convenient copper-free and amine-free Sonogashira coupling of aryl bromides and iodides with terminal acetylenes under amenable conditions in air and in a mixed aqueous medium are reported using several new, user friendly and robust palladium precatalysts (1–5) of N/O-functionalized N-heterocyclic carbenes (NHCs). In particular, the precatalysts, 1 and 2, were synthesized from the imidazolium chloride salts by the treatment with PdCl₂ in pyridine in presence of K₂CO₃ as a base while the precatalysts, 3–5, were synthesized from the respective silver complexes by the treatment with (COD)PdCl₂. The DFT studies carried out on the 1–5 complexes suggest the presence of strong NHC–Pd σ-interactions arising out of deeply buried NHC–Pd σ-bonding molecular orbitals (MOs) that account for the inert nature of the metal–carbene bonds and also provide insights into the exceptional stability of these precatalysts.     

Influence of the nature of the ligand on the microstructure of poly d,l-lactides prepared with organoaluminum initiators

The polymerization of d,l-lactide with organoaluminum initiators bearing two different ligands, acetylacetone (1) and achiral Schiff’s base (2), has been studied. The microstructure of the obtained polymers analyzed by high resolution ¹³C NMR (125 MHz) is strongly influenced by the nature of the ligand. Al(acac)₃ (1) leads to stereocopolymers having random repartition of configurational units while polylactides prepared with aluminum methoxide derivatives bearing as ligand Schiff’s base (2) present some degree of stereoregularity with preferential formation of isotactic sequences.Variation of the ligand linked to the initiator appears as one of the best tools for the moulding of the microstructure of obtained polylactides.     

De novo approach to l-anhydrohexitol nucleosides as building blocks for the synthesis of l-hexitol nucleic acids (l-HNA)

A stereoselective and scalable route to 1,5-anhydrohexitol nucleoside analogues belonging to l-series as building blocks for l-HNA oligonucleotide synthesis has been efficiently tuned. Key to the successful outcome of our approach is the development of a DDQ-mediated domino reaction, which leads to the formation of an unsaturated 1,6-anhydrosugar derivative. Sugar elaborations and base insertion then enable to synthesize six-membered nucleosides.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

Synthesis of l,l-puromycin

l,l-Puromycin, a diastereomer of the natural peptidyl nucleoside antibiotic puromycin, has been synthesized from l-xylose in 13 steps.     

Synthesis, characterization of aluminum complexes and the application in ring-opening polymerization of l-lactide

Aluminum complexes supported by a sulfonamide/Shiff base ligand are described. Reaction of AlMe₃ with 1 equiv of ligand 1, gives methyl aluminum complex 2, and aluminum complex 3 is prepared by the reaction of complex 2 with 1 equiv of benzyl alcohol. Experimental results show that complex 3 is an efficient initiator for the ring-opening polymerization of lactide in controlled fashion, yielding polymers with expectative molecular weight and low polydispersity indexes. Furthermore, the complex 3 has isotactic selectivity for the ring-opening polymerization of rac-lactide.     

Poly l-lactide-layered double hydroxide nanocomposites via in situ polymerization of l-lactide

The use of clay nanofillers offers a potential route to improved barrier properties in polylactide films. Magnesium-aluminium layered double hydroxides (LDHs) are interesting in this respect and we therefore explored synthesis of PLA-LDH nanocomposites by ring-opening polymerization. This method is attractive because it should ensure good dispersion of LDH in the polymer. The effect of adding either LDH carbonate (LDH-CO₃) or laurate-modified LDH (LDH-C₁₂) was investigated. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy revealed that exfoliated nanocomposites were obtained when using LDH-C₁₂ but that LDH-CO₃ gave a partly phase-separated morphology. Thermogravimetric analysis showed that PLA-LDH combinations exhibited higher degradation onset temperatures and differential scanning calorimetry confirmed that LDHs can act as nucleating agents. However, PLA molecular weight was significantly reduced when in-situ polymerization was conducted in the presence of the LDHs and we suggest that chain termination via LDH surface hydroxyl groups and/or metal-catalyzed degradation could be responsible.     

Electrospun poly(l-lactide)-grafted hydroxyapatite/poly(l-lactide) nanocomposite fibers

Composite fibers composed of poly(l-lactide)-grafted hydroxyapatite (PLA-g-HAP) nanoparticles and polylactide (PLA) matrix were prepared by electro-spinning. Environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM) were employed to investigate the morphology of the composite fibers and the distribution of PLA-g-HAP nanoparticles in the fibers, respectively. At a low content (∼4 wt%) of PLA-g-HAP, the nanoparticles dispersed uniformly in the fibers and the composite fibrous mats exhibited higher strength properties, compared with the pristine PLA fiber mats and the simple hydroxyapatite/PLA blend fiber mats. But when the content of PLA-g-HAP further increased, the nanoparticles began to aggregate, which resulted in the deterioration of the mechanical properties of the composite fiber mats. The degradation behaviors of the composite fiber mats were closely related to the content of PLA-g-HAP. At a low PLA-g-HAP content, degradation may be delayed due to the reduction of autocatalytic degradation of PLA. When PLA-g-HAP content was high, degradation rate increased because of the enhanced wettability of the composite fibers and the escape of the nanoparticles from fiber surfaces during incubation.     

Coordination polymers of silver(I) with bis(N-heterocyclic carbene): Structural characterization and carbene transfer

Reactions of the ethylene- and methylene-bridged bis(imidazolium) salts with an equivalent amount of silver oxide in dichloromethane at room temperature produced readily the silver NHC compounds [Ag₂LBr₂]. These compounds are partially soluble in DMF. The X-ray structure determination on 3d (L = 1,1′-dibenzyl-3,3′-ethylenediimidazolin-2,2′-diylidene) reveals the formation of bromide bibridged (Ag₂LBr₂)_n chains and a unique supramolecular motif with weak Ag?Ag interactions of 3.429 Å. Similar to monomeric silver(I) NHC complexes, the silver coordination polymers can also act as carbene transfer reagents for the formation of chelating palladium NHC complexes in excellent yields.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Phospha-palladacycles and N-heterocyclic carbene palladium complexes: efficient catalysts for CC-coupling reactions

Due to the great importance of palladium-catalyzed Heck-type reactions in scientific and industrial chemistry, a lot of publications and reviews have been published during the last years describing this matter under different aspects. This article presents a summary of catalytic applications of palladium complexes with phosphorus ligands containing a metallated sp³-carbon centre (“palladacycles”) or with N-heterocyclic carbene ligands in C-C and C-N coupling reactions of aryl halides including recent results of mechanistic discussions about their role in the catalytic cycle.     

One-pot synthesis of N-Cbz-l-BMAA and derivatives from N-Cbz-l-serine

We report herein an asymmetric synthesis of the modified amino acid N-Cbz-l-BMAA and seven of its alkyl derivatives (2a-h) from N-Cbz-l-serine via ring-opening of the β-lactone (formed under modified Mitsunobu conditions) by different amines. This procedure is simple, one-pot and can generate various derivatives that can be investigated for their toxicological effects. In addition, it can be employed to produce analytical standards for water monitoring as well as labeled compounds for biotransformation studies. This toxin has been the focus of serious ecological and public concern since its implication in degenerative disease such as Alzheimer and Parkinsonism dementia.     

Palladium-catalyzed borylation of l-tyrosine triflate derivative with pinacolborane: practical route to 4-borono-l-phenylalanine (l-BPA) derivatives

Efficient palladium-catalyzed borylation of protected l-tyrosine triflate with pinacolborane was achieved despite previous reports to the contrary. In addition to the use of an inexpensive boron source, the reaction was carried out in the presence of only 0.5 mol % palladium catalyst. Furthermore, the borylation can be performed using pinacolborane prepared in situ from pinacol and borane-diethylaniline complex. This represents a practical entry to 4-borono-l-phenylalanine (l-BPA) derivatives.     

Organometallic peptide NHC complexes of Cp∗Rh(III) and arene Ru(II) moieties from l-thiazolylalanine

The 3-ethyl thiazolium peptide salts Boc-Thia-Leu-OMe and Boc-Thia-Leu-Phe-OMe based on the unnatural amino acid thiazolylalanine (Thia) have been prepared. After deprotonation, they reacted rapidly via the silver carbene transfer reaction with [RhCp^∗Cl₂]₂ and [Ru(p-cymene)Cl₂]₂ to yield the corresponding thiazole-based carbene complexes 7-10 in acceptable yield. All new compounds were characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. These complexes constitute the first examples of thiazolylalanine-2-ylidene metal bioconjugates.