From straight chain to macrocyclic complexes containing mixed sulfur/nitrogen donors and coordinated 1,3-diynes

The acid-mediated reaction of [{Co₂(CO)₆(μ-η²-HOCH₂CC-)}₂] (1) with the meta- and para-substituted aminothiophenols, 3-NH₂-C₆H₄SH and 4-NH₂-C₆H₄SH, affords the straight chain species, [{Co₂(CO)₆(μ-η²-(3-NH₂-C₆H₄S)CH₂CC-)}₂] (2) and [{Co₂(CO)₆(μ-η²-(4-NH₂-C₆H₄S)CH₂CC-)}₂] (3), respectively. The molecular structure of 3 reveals the presence of two isomeric forms differing in the relative disposition of the S-aryl groups. Conversely, reaction of 1 with the ortho-substituted aminothiophenol, 2-NH₂-C₆H₄SH, furnishes the 10-membered macrocyclic species [{Co₂(CO)₆}₂{cyclo-μ-η²:μ-η²-CH₂C₂C₂CH₂SC₆H₃-NH-2}] (4) along with the linear chain complex [{Co₂(CO)₆(μ-η²-(2-NH₂-C₆H₄S)CH₂CC-)}₂] (5). On the other hand, treatment of 1 with the ortho-substituted mercaptopyridine, 2-SH-C₅H₄N, in the presence of HBF₄ gives the salt [{Co₂(CO)₆(μ-η²-(2-S-C₅H₄NH)CH₂CC-)}₂](BF₄)₂ (6a) in good yield; work-up in the presence of base affords the neutral complex [{Co₂(CO)₆(μ-η²-(2-S-C₅H₄N)CH₂CC-)}₂] (6b). Single crystal X-ray diffraction studies have been reported on 3-5 and 6a.     

A comparison between the reaction of P2Ph4 with [{Co2(CO)6}2(μ-η:μ-η-HOCH2CCCCCH2OH)] and the reaction of [Co2(μ-PPh2)2(CO)6] with HOCH2CCCCCH2OH

Reaction of P₂Ph₄ with the diyne-diol complex [{Co₂(CO)₆}₂(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] in toluene at 65 °C gives [{Co₂(μ-P₂Ph₄)(CO)₄}{Co₂(CO)₆}(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] (1). Thermolysis of 1 at 95 °C leads to [{Co₂(CO)₅}₂(μ-P₂Ph₄)(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)](2) and (μ₂-PPh₂)(μ₂-CO)(CO)₇] (3). The structures of 1-3 have been established by X-ray crystallography. In 1, a pseudoequatorial P₂Ph₄ ligand bridges the cobalt-cobalt bond of a Co₂(CC)(CO)₄ unit. By contrast, in isomeric 2, a pseudoaxial P₂Ph₄ ligand spans two Co₂(CC)(CO)₅ units, a new coordination mode for [{Co₂(CO)₅L}₂(μ-η²:μ-η²-diyne)] complexes. Complex 3 arises from dehydration-cyclocarbonylation of the diyne-diol in 1 to give a 2(5H)-furanone, a process that has not been previously reported. Reaction of HOCH₂CCCCCH₂OH with [Co₂(μ-PPh₂)₂(CO)₆] at 80 °C in toluene gave [Co₃(μ-PPh₂)₃(CO)₆], [Co₂(CO)₆(μ-η²-HOCH₂CCCCCH₂OH)] and [Co₂{μ-η⁴-PPh₂C(CCCH₂OH)C(CH₂OH)CO}(μ-PPh₂)(CO)₄] (4). The regiochemistry of 4 was confirmed by X-ray crystallography.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Amination and Suzuki coupling reactions catalyzed by palladium complexes coordinated by cobalt-containing monodentate phosphine ligands with bis-trifluoromethyl substituents on bridged arylethynyl: Observation of some unusual metal-containing compounds

Two cobalt-containing bulky monodentate phosphines {[(μ-PPh₂CH₂PPh₂)Co₂(CO)₄][(μ,η-(^tBu)₂PCCAr]} (4cm: Ar = 3-CF₃C₆H₄; 4cmm: Ar = 3,5-(CF₃)₂C₆H₃) were prepared from the reaction of Co₂(CO)₆(μ-PPh₂CH₂PPh₂) (3) with each corresponding alkynes (^tBu)₂PCCAr. Both compounds were converted to their oxidized forms {[(μ-PPh₂CH₂PPh₂)Co₂(CO)₄][(μ,η-(^tBu)₂P(O)CCAr]} (4cmO: Ar = 3-CF₃C₆H₃; 4cmmO: Ar = 3,5-(CF₃)₂C₆H₃) in the presence of oxide. Further reactions of 4cm and 4cmm with Pd(OAc)₂ gave palladium complexes {[(μ-PPh₂CH₂PPh₂)Co₂(CO)₄][(μ,η-(^tBu)₂PCC(Ar)-κC¹)]Pd(μ-OAc)} 5cm (Ar = 3-CF₃C₆H₃) and 5cmm (Ar = 3,5-(CF₃)₂C₆H₂), respectively. By contrast, reactions of 4cm and 4cmm with Pd(COD)Cl₂ gave products, [{μ-P,P-PPh₂CH₂PPh₂}Co₂(CO)₃(μ-CO){μ,η-(^tBu)₂PCCAr}]-PdCl₂] 8cm and 8cmm, respectively, with unique bonding modes. Several crystallines of [(4cm)₂Pd₃(μ-Cl)(μ-CO)₂)(μ-Cl)]₂ (9) were obtained along with crystallines of 8cm during the crystallization process. The crystal structures of all three compounds, 4cmmO, 8cmm and 9 were determined by single-crystal X-ray diffraction methods. Fair to excellent efficiencies were observed for employing 4cmm/palladium salt as catalytic precursor in amination as well as in Suzuki coupling reactions.     

Synthesis, structures and comparative electrochemical study of 2,5-bis(trimethylsilylethynyl)thiophene coordinated cobalt carbonyl units

The reaction between 2,5-bis(trimethylsilylethynyl)thiophene and Co₂(CO)₈ or Co₂(CO)₆(X), (X = dppa, dppm), gave rise to the formation of substituted ethynylcobalt complexes containing one or two Co₂(CO)₆ or Co₂(CO)₄(X) units, 2-[Co₂(CO)₄(X){μ₂-η²-(SiMe₃)C₂}]-5-(Me₃SiCC)C₄H₂S (X = 2CO (1), dppa (3) or dppm (4)) and 2,5-[Co₂(CO)₄(X){μ₂-η²-SiMe₃C₂}]₂C₄H₂S (X = 2CO (2), dppa (5) or dppm (6)). Desilylation of the non-metallated and metallated alkynes in 3, 4 and 6 occurred on treatment with KOH and tetrabutylammonium fluoride to give 2-[Co₂(CO)₄(μ-X){μ₂-η²-SiMe₃C₂}]-5-(CCH)C₄H₂S (X = dppa (7), dppm (8)) and 2,5-[Co₂(CO)₄(μ-dppm){μ₂-η²-HC₂}]₂C₄H₂S (9), respectively. Crystals of 6 suitable for single-crystal X-ray diffraction were grown and the molecular structure of this compound is discussed. A comparative electrochemical study of all these complexes is presented by means of the cyclic and square-wave voltammetry techniques.     

Formation of multifunctional ligands by nucleophilic addition of alcohols and thiols to the alkyne groups in compound C5H5FeC5H4CCSCCH: Reactivity studies

The multifunctional ligands [(Z)-FcCCSC(H)C(H)XR] [X = O, R = Me (2a); X = O, R = Et (2b); X = S, R = Ph (3); X = S, R = C₆F₅ (5)] and [(Z,Z)-Fc(SR)CC(H)SC(H)C(H)SR] [R = Ph (4), C₆F₅ (6)] have been prepared through hydroalkoxylation and hydrothiolation processes of the alkyne groups in the compound FcCCSCCH 1. Reactions between compound 3 and the carbonyl metals Co₂(CO)₈, Os₃(CO)₁₀(NCMe)₂ and Fe₂(CO)₉ have allowed the synthesis of the polynuclear compounds [(Z)-{Co₂(CO)₆}(μ-η²-FcCCSC(H)C(H)SPh)] 9, [(Z)-Os₃(CO)₉(μ-CO){μ₃-η²-FcCCSC(H)C(H)(SPh)}] 10 and [(Z)-{Fe₃(CO)₉}[μ₃,η³-(CCS)-FcCCSC(H)C(H)(SPh)] 11. All the compounds have been characterized by elemental analysis, ¹H and ¹³C{¹H} NMR spectroscopy, mass spectrometry and the crystal structure of compounds [(Z)-FcCCSC(H)C(H)OMe] 2a and [{Co₂(CO)₆}₂(μ-η²:η²-FcCCSCCSiMe₃)] 7 have been solved by X ray diffraction analysis.     

Reactions of linked tetrahedron clusters [Co2(CO)6(μ-HC2CH2O)-]2R with Rh2(CO)4Cl2 to give mixed-metal linked alkyne-bridged butterfly clusters containing C2Co2Rh2 unit

The reactions of compound Rh₂(CO)₄Cl₂, 1 with [Co₂(CO)₆(μ-HC₂CH₂O)-]₂R (R = C₆H₄, 2; (COCH₂)₂, 3; C₆H₄-1,4-(CO)₂, 4; (COCH)₂, 5; (CO)₂, 6) in benzene at 60 °C produce five new mixed-metal linked clusters Rh₂Co₂(CO)₁₀(μ₄,η²-HC₂CH₂O-R-OCH₂C₂H-μ)Co₂(CO)₆ (R = C₆H₄, 7a; (COCH₂)₂, 7b; C₆H₄-1,4-(CO)₂, 7c; (COCH)₂, 7d; (CO)₂, 7e) and five known linked octahedral clusters [Rh₂Co₂(CO)₁₀(μ₄,η²-HC₂CH₂O-)]₂R (R = C₆H₄, 8a; (COCH₂)₂, 8b; C₆H₄-1,4-(CO)₂, 8c; (COCH)₂, 8d; (CO)₂, 8e), respectively. Treatment of clusters 7a-8e in benzene at room temperature under air for 24 h with stirring afford the precursor clusters 2-6, respectively. The structure of cluster 7a has been determined by single-crystal X-ray diffraction. The linked cluster 7apossesses two isomers A and B in its structures, the Rh₂(CO)₄ unit inserts into one of two Co-Co bonds and coordinates to the Co₂C₂ core forming one distorted closo-Rh₂Co₂C₂ octahedron framework which is connected to the Co₂C₂ tetrahedron unit via C₆H₄(OCH₂)₂-1,4 as a bridging ligand. All clusters were characterized by C, H elemental analysis, IR and ¹H NMR spectroscopy.     

Alkynylphosphanes as supports for mixed-metal Co4M (M = Ru, Os) fluoride complexes: Syntheses, structures and thermolysis studies

Treatment of the tetrameric group eight fluoride complexes [MF(μ-F)(CO)₃]₄ [M = Ru (1a), Os (1b)] with the alkynylphosphane, Ph₂PCCPh, results in fluoride-bridge cleavage and the formation of the air-sensitive monomeric octahedral complexes [MF₂(CO)₂(PPh₂CCPh)₂] [M = Ru (2a), Os (2b)] in high yield. The molecular structure of 2b reveals a cis, cis, trans configuration for each pair of ligands, respectively. The free alkyne moieties in 2 can be readily complexed to hexacarbonyldicobalt fragments by treatment with dicobalt octacarbonyl to afford [MF₂(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂] [M = Ru (3a), Os (3b)]. Evidence for an intramolecular non-bonded contact between a bound fluoride and a cobalt carbonyl carbon atom is seen in the molecular structure of 3a. Thermolysis of 3a at 50 °C results in fluoride dissociation to give [RuF(CO)₂(μ-η¹:η²-PPh₂CCPh)₂{Co₂(CO)₆}₂]⁺ (4), while no reaction occurred with the osmium analogue. Prolonged thermolysis at 120 °C in a sealed vessel of both 3a and 3b gave only insoluble decomposition products.     

Insertion of alkynes into the heterocycle of (η-pentaalkyl-2,3-dihydro-1,3-diborolyl)(η-pentamethylcyclopentadienyl)ruthenium: Formation and characterization of 4-borataborepine ruthenium complexes

The violet ruthenium complex [(η⁵-C₅Me₅)Ru(η⁵-C₃B₂Me₄R¹)] (2a, R¹ = Me) reacts with terminal alkynes R²CCH to give yellow 4-borataborepine compounds [(η⁵-C₅Me₅)Ru{η⁷-(MeC)₃(R¹B)₂(R²C₂H)}] (4c, R¹ = Me, R² = Ph; 4d, R¹ = Me, R² = SiMe₃; 4e, R¹ = Me, R² = H). The insertion of alkynes into the folded C₃B₂ heterocycle of 2a causes some steric hindrance, which yields with elimination of the distant boranediyl group the corresponding boratabenzene complexes 5 as byproducts. The analogous reactions with internal alkynes R²CCR² proceed slowly and afford predominantly the boratabenzene complexes [(η⁵-C₅Me₅)Ru{η⁶-(MeC)₃(MeB)(R²C)₂}] (5f, R² = Et, 5g, R² = p-tolyl), respectively. In the latter case, three byproducts are formed: methylboronic acid and 1,2,3,4-tetra-p-tolyl-1,3-butadiene (9) due to hydrolysis of the postulated 2,3,4,5-tetra-p-tolyl-1-methylborole (10) and unexpectedly, the cationic triple-decker complex [{(η⁵-C₅Me₅)Ru}₂{μ,η⁷-(MeC)₃(MeB)₂(CH)₂}]Cl (11) having two separated CH groups. The new compounds were characterized by NMR, MS, and single-crystal X-ray studies of 4c, 5f, 9 and 11.     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.     

Titanium (IV) complexes based on substituted 2-[(2-hydroxyethyl)]aminophenols

Novel substituted 2-[(2-hydroxyethyl)]aminophenols, MeN(CHR¹CR²R³OH)(C₆H₄-o-OH) (2-5), were synthesized by the reaction of 2-methylaminophenol with corresponding oxiranes. Titano-spiro-bis(ocanes) [MeN(CHR¹CR²R³O)(C₆H₄-o-O)]₂Ti 6-9 (2, 6, R¹ = H, R² = R³ = Me; 3, 7, R¹ = R² = Ph (treo-), R³ = H; 4, 8, R¹ = Ph, R² = R³ = H; 5, 9, R¹ = R² = H, R³ = Ph) based on [ONO]-ligands have been synthesized. The obtained compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The complex [Ti(μ²-O){O-o-C₆H₄}{μ²-CMe₂CH₂}NMe]₆ (10) was obtained by controlled hydrolysis of 6. Molecular structure of 10 was determined by X-ray structure analysis.     

Isocyanide insertion reactivity of dinuclear niobium and tantalum imido complexes: X-ray crystal structure of [{Nb(η-C5H4SiMe3)(CH2Ph)2}2(μ-1,4-NC6H4N)]

The reactivity of dinuclear niobium and tantalum imido complexes with the isocyanide compound 2,6-Me₂C₆H₃NC has been studied. The trialkyl complexes [{NbR₃(CH₃CN)}₂(μ-1,3-NC₆H₄N)], [{NbR₃(CH₃CN)}₂(μ-1,4-NC₆H₄N)] and [{TaR₃(CH₃CN)}₂(μ-1,4-NC₆H₄N)] (R=CH₂SiMe₃) gave [{Nb(η²-RCNAr)₂R}₂(μ-1,3-NC₆H₄N)] (1), [{Nb(η²-RCNAr)₂R}₂(μ-1,4-NC₆H₄N)] (2) and [{Ta(η²-RCNAr)₂R}₂(μ-1,4-NC₆H₄N)] (3) (R=CH₂SiMe₃; Ar=2,6-Me₂C₆H₃), from the isocyanide insertion in two of the metal alkyl carbon bonds. The reaction of the isocyanide reagent with the di-alkyl mono-cyclopentadienyl derivatives [{Nb(η⁵-C₅H₄SiMe₃)R₂}₂(μ-1,3-NC₆H₄N)] (R=Me, CH₂Ph, CH₂SiMe₃), [{Nb(η⁵-C₅H₄SiMe₃)R₂}₂(μ-1,4-NC₆H₄N)] (R=Me, CH₂Ph (4), CH₂SiMe₃) and [{Ta(η⁵-C₅Me₅)(CH₂SiMe₃)₂}₂(μ-1,4-NC₆H₄N)] yielded [{Nb(η⁵-C₅H₄SiMe₃)(η²-RCNAr)R}₂(μ-1,3-NC₆H₄N)] (R=Me (5), CH₂Ph (6), CH₂SiMe₃ (7)), [{Nb(η⁵-C₅H₄SiMe₃)(η²-RCNAr)R}₂(μ-1,4-NC₆H₄N)] (R=Me (8), CH₂Ph (9), CH₂SiMe₃ (10)) and [{Ta(η⁵-C₅Me₅)(η²-Me₃SiCH₂CNAr)CH₂SiMe₃}₂(μ-1,4-NC₆H₄N)] (11) (Ar=2,6-Me₂C₆H₃), respectively, from a single insertion process. The reaction with the mono-alkyl complex [{Nb(η⁵-C₅H₄SiMe₃)(Me)Cl}₂(μ-1,4-NC₆H₄N)] gave [{Nb(η⁵-C₅H₄SiMe₃)(η²-MeCNAr)Cl}₂(μ-1,4-NC₆H₄N)] (12), produced from the isocyanide insertion in the metal-alkyl carbon bond. The alkyl-amido complex [{Nb(η⁵-C₅H₄SiMe₃)(Me)NMe₂}₂(μ-1,4-NC₆H₄N)] gave, from the preferential isocyanide insertion in the metal-amide nitrogen bond, [{Nb(η⁵-C₅H₄SiMe₃)(η²-Me₂NCNAr)Me}₂(μ-1,4-NC₆H₄N)] (13). The molecular structure of one of the alkyl precursors, [{Nb(η⁵-C₅H₄SiMe₃)(CH₂Ph)₂}₂(μ-1,4-NC₆H₄N)] (4), has been determined.     

Synthesis of [1′-(diphenylthiophosphoryl)ferrocenyl]ethyne and alkyne-metal complexes thereof

The novel functionalized ferrocene alkyne Ph₂P(S)fcCCH (1; fc = ferrocene-1,1′-diyl) was synthesized from Ph₂P(S)fcCHO (6) via the Corey-Fuchs reaction. It was further reacted with K₂[HgI₄]/KOH to give mercury(II) acetylide Hg{CCfcP(S)Ph₂}₂ (8), and with [Co₂(CO)₈] to afford the trimetallic Co₂Fe complex [(μ-η²:η²-1){Co(CO)₃}₂](Co-Co) (9). All compounds were characterized by spectral methods (IR, NMR, and MS) and by combustion or high-resolution MS elemental analyses. In addition, the crystal structures of 1, Ph₂PfcBr (5), 6, Ph₂P(S)fcCHCBr₂ (7), and 9 were determined by single-crystal X-ray diffraction.     

Di- and tri-nuclear molybdenum-palladium complexes bearing strong π-acceptor “P-N-P” ligands, MeN{P(OR)2}2 (R = CH2CF3 or Ph)

The dipalladium complexes, [PdCl(μ-MeN{P(OR)₂}₂)]₂ (R = CH₂CF₃, 1a; Ph, 1b) react with [Mo₂(η⁵-C₅H₅)₂(CO)₆] in boiling benzene to afford the molybdenum-palladium heterometallic complexes, [(η⁵-C₅H₅)(CO)Mo(μ-MeN{P(OR)₂}₂)₂PdCl] (R = CH₂CF₃, 3a; Ph, 3b), [(η⁵-C₅H₅)Mo(μ₃-CO)₂(μ-MeN{P(OR)₂}₂)₂Pd₂Cl], (R = CH₂CF₃, 5a; Ph, 5b), [(η⁵-C₅H₅)(Cl)Mo(μ₂-CO)(μ₂-Cl)(μ-MeN{P(OR)₂}₂)PdCl], (R = CH₂CF₃, 6a; Ph, 6b) and also the mononuclear complex [Mo(CO)Cl(η⁵-C₅H₅)(κ²-MeN{P(OR)₂}₂)], (R = Ph, 4b). These complexes have been separated by column chromatography and are characterised by elemental analysis, IR, ¹H, ³¹P{¹H} NMR data. The structures of 1a, 3a, 4b, 5b and 6a have been confirmed by single crystal X-ray diffraction. The CO ligands in 5b and 6a adopt a semi-bridging mode of bonding; the Mo-CO distances (1.95-1.97 Å) are shorter than the Pd-CO distances (2.40-2.48 Å). The Pd-Mo distances fall in the range, 2.63-2.86 Å. The reaction of [Mo₂(η⁵-C₅H₅)₂(CO)₆] with MeN{P(OPh)₂}₂ in toluene gives [Mo₂(CO)₄(η⁵-C₅H₅)₂(κ¹-MeN{P(OPh)₂}₂)₂] (2) in which the diphosphazane acts as a monodentate ligand.     

Olefin-aminocarbyne coupling in diiron complexes: Synthesis of new bridging aminoallylidene complexes

The bridging aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; Xyl, 1b; 4-C₆H₄OMe, 1c; Xyl = 2,6-Me₂C₆ H₃) react with acrylonitrile or methyl acrylate, in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³- C_α(N(Me)(R))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = CN, 3a; R = Xyl, R′ = CN, 3b; R = 4-C₆H₄OMe, R′ = CN, 3c; R = Me, R′ = CO₂Me, 3d; R = 4-C₆H₄OMe, R′ = CO₂Me, 3e). Likewise, 1a reacts with styrene or diethyl maleate, under the same reaction conditions, affording the complexes [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(R′)C_γ(H)(R″)}(μ-CO)(CO)(Cp)₂] (R′ = H, R″ = C₆H₅, 3f; R′ = R″ = CO₂Et, 3g). The corresponding reactions of [Ru₂{μ-CN(Me)(CH₂Ph)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1d) with acrylonitrile or methyl acrylate afford the complexes [Ru₂{μ-η¹:η³-C_α(N(Me)(CH₂Ph))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R′ = CN, 3h; CO₂Me, 3i), respectively.The coupling reaction of olefin with the carbyne carbon is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs selectively between the less substituted alkene carbon and the aminocarbyne, and the C_β-H, C_γ-H hydrogen atoms are mutually trans.The reactions with acrylonitrile, leading to 3a-c and 3h involve, as intermediate species, the nitrile complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NC-CHCH₂)(Cp)₂][SO₃CF₃] (M = Fe, R = Me, 4a; M = Fe, R = Xyl, 4b; M = Fe, R = 4-C₆H₄OMe, 4c; M = Ru, R = CH₂C₆H₅, 4d).Compounds 3a, 3d and 3f undergo methylation (by CH₃SO₃CF₃) and protonation (by HSO₃CF₃) at the nitrogen atom, leading to the formation of the cationic complexes [Fe₂{μ-η¹:η³-C_α(N(Me)₃)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 5a; R = CO₂Me, 5b; R = C₆H₅, 5c) and [Fe₂{μ-η¹:η³-C_α(N(H)(Me)₂)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 6a; R = CO₂Me, 6b; R = C₆H₅, 6c), respectively.Complex 3a, adds the fragment [Fe(CO)₂(THF)(Cp)]⁺, through the nitrile functionality of the bridging ligand, leading to the formation of the complex [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CNFe(CO)₂Cp)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (9).In an analogous reaction, 3a and [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃], in the presence of Me₃NO, are assembled to give the tetrameric species [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CN[Fe₂{μ- CN(Me)(R)}(μ-CO)(CO)(Cp)₂])}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Me, 10a; R = Xyl, 10b; R = 4-C₆H₄OMe, 10c).The molecular structures of 3a and 3b have been determined by X-ray diffraction studies.     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

Metal β-diketiminates revisited: ansa-CH2-bridged bis(β-diketiminate)s of lithium and aluminium having diverse structures

The metal β-diketiminato ligand-to-metal binding modes are briefly reviewed, with reference particularly to our previous work on metal complexes using the ligands [{N(R¹)C(R²)}₂CH] (R¹ = SiMe₃ = R and R² = Ph; or R¹ = C₆H₃Prⁱ₂-2,6 and R² = Me). The syntheses of the β-diketimines H[{N(R)C(Ar)}₂CH] 1 (Ar = Ph) and 2 (Ar = C₆H₄Me-4) and the ansa-CH₂-bridged bis(β-diketimine)s 3 (Ar = Ph) and 4 (Ar = C₆H₄Me-4) are reported. Thus, from the appropriate compound Li[{N(R)C(Ar)}₂CH] and H₂O, (CH₂Br)₂ or CH₂Br₂ the product was 2, 3 or 4. Compound 1 was prepared from K[{N(R)C(Ph)}₂CH] and (CH₂Br)₂. Each of 3 or 4 with LiBuⁿ surprisingly yielded the bicyclic dilithium compound 5 (Ar = Ph) or 6 (Ar = C₆H₄Me-4) in which each of the β-diketiminato fragments is an N,N′-bridge between the two lithium atoms and the CH₂ moiety joins the two ligands through their central carbon atoms. However, 4 with AlMe₃ yielded the expected ansa-CH₂-bridged-bis[(β-diketiminato)(dimethyl)alane] 7, which was also obtained from 6 and Al(Cl)Me₂. X-ray structures of the known compounds 2 and 3, and of 5, 6 and 7 are presented; the ¹H NMR spectra of 6 in toluene-d₈ show that there is restricted rotation about the NC-C₆H₄Me-4 bond.     

Reactivity of electron-poor decamethyl-1,3-diboraruthenocene with sulfur and phosphorus compounds

Decamethyl-1,3-diboraruthenocene [(η⁵-C₅Me₅)Ru{η⁵-(CMe)₃(BMe)₂}] (1) reacts with cyclo-octasulfur in hexane to give [(η⁵-C₅Me₅){η⁵-(CMe)₃(BMe)₂}RuS] (3), which may also be obtained from 1 and propylene sulfide. 1 reacts with H₂S to form the ruthenathiacarboranyl complex [(η⁵-C₅Me₅)Ru{η⁴-(CMe)₃(BMe)₂S}] (6), for which a nido-structure is proposed. The isomeric compounds 3 and 6 have different stabilities: 3 loses sulfur and unexpectedly the closo-cluster [(η⁵-C₅Me₅)₂Ru₂H(CMe)₃(BMe)₂] (4) is formed with hydrogen bridging the basal and apical Ru centers. Reaction of 1 with carbonylsulfide (COS) yields the dinuclear ruthenium compound [(η⁵-C₅Me₅)Ru{η⁵-(CMe)₃(BMe)₂(S)(COBMe)}]₂ (7) in which two B-O groups bridge two ruthenium complexes. Its formation results from a complex reaction sequence: sulfur inserts into the diborolyl ring and the ligand CO forms an oxygen-boron bridge to a second molecule, followed by insertion of the carbonyl carbon into the double bond of the diboraheterocycle. Carbon disulfide reacts with 1 to give the dinuclear complex 8 with two CS₂ molecules connecting the ruthenium centers. When 1 and P₄ are heated in toluene, the sandwich 9 is obtained by formal insertion of a P-H group into the diborolyl ring of 1 and the triple-decker [{η⁵-(C₅Me₅)Ru}₂{μ-(MeC)₃P(MeB)₂} (10) is detected in the mass spectrum. The phosphaalkyne PCtBu inserts into 1 to give the ruthenaphosphacarborane [(η⁵-C₅Me₅)Ru{(CMe)₂(BMe)(PCtBu)(CMe)(BMe)}] (11) in high yield. Phosphanes react with 1 to give weak donor-acceptor complexes 1 · PH₂R (12) (R=Ph, H). The compositions of the compounds are deduced from spectroscopic and analytical data and are confirmed for 4 and 7 by X-ray structural analyses.     

Relationships between Fe NMR, Mössbauer parameters, electrochemical properties and the structures of ferrocenylketimines

A comparative study of the electrochemical properties, ⁵⁷Fe NMR and Mössbauer spectroscopic data of compounds [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-C(R¹)N-R²}] {R¹ = H, R² = CH₂-CH₂OH (1a), CH(Me)-CH₂OH (1b), CH₂C₆H₅ (1c), C₆H₄-2Me (1d), C₆H₄-2SMe (1e) or C₆H₄-2OH (1f) and R¹ = C₆H₅, R² = C₆H₄-2Me (2d)} is reported. The X-ray crystal structure of [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CHN-C₆H₄-2OH}] (1f) is also described. Density functional theoretical (DFT) studies of these systems have allowed us to examine the effects induced by the substituents of the “-C(R¹)N-R²” moiety or the aryl rings (in 1d-1f) upon the electronic environment of the iron(II) centre.