Membrane Potential of Composite Bipolar Membrane in Ethanol-Water Solutions: The Role of the Membrane Interface

The membrane potential across a composite bipolar membrane (CBM) composed of a cation-exchange membrane with an anion-exchange membrane is theoretically and experimentally analyzed for LiCl ethanol-water solutions. The theoretical approach is based on an extension of the Donnan equilibrium and the Nernst-Planck equation of monopolar charged membranes for the case of two ion-exchange layers by considering the effect of electrolyte ion pairing in the external solution. The experimental results show that the effective membrane charge densities of the two ion-exchange layers will become smaller than those which are separately estimated for each layer. We have introduced a contact factor, zeta, into the theoretical approach to clarify this phenomenon in this study, and the theoretical predictions were in good agreement with the experimental data. The membrane potential measurements show that CBM has the characteristics of a bipolar membrane and can significantly contribute to a better electrochemical characterization of the CBMs. Copyright 1999 Academic Press.     

Metallization of solid hydrogen: the challenge and possible solutions

The search for the means to convert molecular hydrogen to a metal under static conditions at high pressure is reviewed with emphasis on selected recent developments in both experimental studies and theoretical approaches. One approach suggested recently makes use of mixtures of hydrogen and suitable impurities. In these materials hydrogen is perturbed by impurities with the goal of obtaining the metallization of hydrogen at moderate pressures. This approach has also been extensively examined through the use of first-principles methods and we review this recently explored experimental approach and several theoretical studies that have provided an atomic-scale picture of the interaction of hydrogen with impurities under pressure. The objective of this novel approach is to help determine if metallization of hydrogen at pressures is attainable with currently available experimental techniques.     

Sorption and diffusion of low molecular weight gases and vapors in glassy polymers at high concentration of sorbate

A theoretical approach has been developed to describe the sorption and diffusion processes of low weight molecular gases and vapors in polymers at wide ranges of sorbate concentration. The equation of an S‐shaped gas sorption isotherm in glassy polymer matrix has been derived. The concentration dependence of the sorbate molecule diffusion coefficient has been established. For an S‐shaped sorption isotherm, this dependence is nonmonotonous. The conditions of cluster formation of sorbate molecules have been analyzed within the proposed approach, in which it is possible to determine a correlation between these conditions and parameters of sorption isotherm. The comparison of the experimental and theoretical data provides an assessment of the microscopic characteristics of investigated polymer–vapor systems, such as the distances between vapor molecules in a matrix corresponding to intermolecular repulsion and attraction. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2314–2323, 1999     

A new theoretical-experimental model deriving from the contactless measurement of the thickness of bulge-tested elastomeric samples

In this paper, an ultrasound measurement method was applied to bulge test on carbon black-filled SBR specimens, in order to determine their thickness at the top of the dome. This method consists in measuring first the variation in the ultrasonic velocity as a function of the deformation in the uniaxial state and subsequently obtaining the thickness value in the equibiaxial state, assuming the congruence of velocity in uniaxial and equibiaxial stress states, respectively.The comparison between experimental data and the thickness values deriving from the most reliable theoretical criteria for both metallic and rubbers-like materials was shown.A new theoretical approach taking into account the slight compressibility of elastomers to estimate the thickness at the dome apex was proposed. Such an approach provided a general equation to define the thickness of the dome in bulge-tested SBR+20%CB as a function of the Poisson ratio.     

The standard free energy of surfactant adsorption at air/water and oil/water interfaces: Theoretical vs. empirical approaches

The standard free energy of surfactant adsorption represents the work of transfer of a surfactant molecule from the bulk of solution to an infinitely diluted adsorption layer. This quantity can be determined by non-linear fits of surface-tension isotherms with the help of a theoretical model of adsorption. Here, the models of Frumkin, van der Waals and Helfand-Frisch-Lebowitz are applied, and the results are compared. Irrespective of the differences between these models, they give close values for the standard free energy. The results from the theoretical approach are compared with those from the most popular empirical approach. The latter gives values of the standard free energy, which are considerably different from the respective true values, with c.a. 10 kJ/mol for nonionic surfactants, and with c.a. 20 kJ/mol for ionic surfactants. These differences are due to contributions from interactions between the molecules in dense adsorption layers. It is concluded that the true values of the standard free energy can be determined with the help of an appropriate theoretical model. For the processed sets of data, the van der Waals model gives the best results, especially for the determination of the standard adsorption enthalpy and entropy from the temperature dependence of surface tension. The results can be useful for the development of a unified approach to the thermodynamic characterization of surfactants.     

物理法COD减排理论极限能耗的热力学分析

首先针对系统的可持续性发展提出了三点本质要求,在此基础上提出了基于减排过程节能机制的热力学框架,并根据热力学第一、第二定律建立了计算物理法脱除有机污染物理论极限能耗的热力学分析方法.此外,以典型有机污染物的脱除为例,分别计算了封闭体系中298.15K和1.01325×105Pa下不同初始浓度、不同种类以及不同COD减排量的有机污染物脱除的理论极限能耗.本文的计算结果表明,废水中有机污染物的减排需要很高的能耗,脱除相同量有机污染物所需的理论极限能耗随着初始浓度的减小而显著增加,且不同种类污染物处理的难易程度和能耗高低相差很大,这充分说明减排与节能有着密不可分的联系,充分考虑污染物的种类、物理化学性质、毒性和浓度将有助于减排政策的科学制定.     

Theoretical study of the structural and energetic properties of platinum clusters with up to 60 atoms

Structural Chemistry - Applying a theoretical approach that combines an efficient and fast global optimization based on genetic algorithms (GA) to search in structure space and the parameterized...     

Protrusion and deformation of an elastic particle at an advancing front interface

The response of an elastic particle to an extensional field close to an advancing liquid–gas interface in a capillary was examined both from an experimental and theoretical viewpoint. Experimental evidence is given on both the protrusion and deformation of an elastic particle at an advancing front interface. To interpret our experimental results, we followed and extended Hoffman's approach to the case of deformable particles. A hybrid approach was followed where the height of the bump was calculated theoretically as an equilibrium between capillary and drag forces for a given deformation of the particle, whereas the latter was supplied by an independent experimental measurement. For an elastic particle, the height of the bump goes through a maximum and further on decay almost linearly when plotted against the dimensionless parameter introduced by Hoffman. The difference between the theoretical prediction and the experimental data is discussed in relation to the asymmetry of the bump profiles observed in the experiment that could be responsible for a larger contribution of capillary forces from those calculated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1362–1374, 2003     

Comparison of an empirical and a theoretical linear solvation energy relationship applied to the characterization of solute distribution in a poly(ethylene) glycol-salt aqueous biphasic system

A Linear Solvation Energy Relationship (LSER) developed by Abraham has been applied to the partition of organic solutes in an Aqueous Biphasic System (ABS) and to published values of their 1-octanol/water partition coefficients. The results are compared to the application of a conceptually similar Theoretical Linear Solvation Energy Relationship (TLSER) developed by Famini and co-workers. Differences and similarities in the molecular properties highlighted by each LSER are discussed. The theoretical relationship of Famini, although modeled on the approach of Abraham, seems not to encapsulate molecular properties in the same way as the Abraham's empirical relationship. However, this theoretical approach has the great merit of computational simplicity, and it is concluded that efforts directed toward its improvement could be rewarding.     

Influence de la substitution et de la solvatation sur les forces acides. Approche Theorique.

The use of a theoretical method which takes account of solvent effects permits an original approach of importance of substitution and solvation on acid strengths.     

Kinetics of spreading of photodamaged DOPC liposomes at the air-water interface

The kinetics of surface film formation from DOPC small unilamellar liposomes spread at the air-water interface was studied. A simple theoretical and experimental approach was used.It was found that the surface transformation process was accelerated under photodynamic lipid peroxidation in presence of methylene blue and red light illumination. A theoretical approach, coupling the photodynamic action and the process of spreading of liposomes was developed. The mechanisms of photomodification and destabilization of the liposomal bilayer structures was analyzed.     

Solid-state nuclear magnetic resonance in the rotating tilted frame

Recent methodological advances have made it possible to measure fine structure on the order of a few hertz in the nuclear magnetic resonance (NMR) spectra of quadrupolar nuclei in polycrystalline samples. Since quadrupolar couplings are often a significant fraction of the Zeeman coupling, a complete analysis of such experimental spectra requires a theoretical treatment beyond first-order. For multiple pulse NMR experiments, which may include sample rotation, the traditional density matrix approaches for treating higher-order effects suffer from the constraint that undesired fast oscillations (i.e., multiples of the Zeeman frequency), which arise from allowed overtone transitions, can only be eliminated in numerical simulations by employing sampling rates greater than 2I times the Zeeman frequency. Here, we present a general theoretical approach for arbitrary spin I that implements an analytical "filtering" of undesired fast oscillations in the rotating tilted frame, while still performing an exact diagonalization. Alternatively, this approach can be applied using a perturbation expansion for the eigenvalues and eigenstates, such that arbitrary levels of theory can be explored. The only constraint in this approach is that the Zeeman interaction remains the dominant interaction. Using this theoretical framework, numerical simulations can be implemented without the need for a high sampling rate of observables and with significantly reduced computation times. Additionally, this approach provides a general procedure for focusing on the excitation and detection of both fundamental and overtone transitions. Using this approach we explore higher-order effects on a number of sensitivity and resolution issues with NMR of quadrupolar nuclei.     

固体异质结界面结构预测方法及AutoInterface程序实现

预测材料异质结的界面原子结构对于理解界面对性能的影响至关重要. 目前, 从理论上预测材料界面结构仍具有极大挑战, 主要是缺乏普适有效的理论计算方法. 本文介绍了本课题组在异质结界面结构预测方面取得的最新进展. 结合马氏体相变唯象理论、 图论和随机表面行走算法, 提出了界面结构的一种有效预测方法, 可以实现自动化的计算预测. 通过GaP/TiO₂半导体异质结等展示了该方法的有效性和在催化等领域的应用前景.     

Structure and stability of supramolecular crown ether complexes

Despite the fact that the complexation of ammonium cations with ionophores like crown ethers plays an important role in biological and industrial processes, there is still a lack of theoretical methods to reproduce or even predict the host–guest complex structures or their thermodynamic stabilities in an accurate manner. Hence, the development of ionophores has often relied on a trial‐and‐error approach and the synthetic efforts associated with this have been enormous, so far. Therefore, theoretical methods for the reliable prediction of binding affinities of crown ether derivatives with ammonium ions would be an indispensable tool for the rational design of new receptors with tailored properties. Here, we suggest a computationally efficient but still accurate theoretical approach. It is tested for a model system consisting of 18‐crown‐6 ether and an ammonium cation, but is invented for application to much larger complexes. The accuracy of various approximate quantum‐chemical methods, based on density functional theory (DFT) and many‐body perturbation theory, is evaluated against the gold standard CCSD(T) in the basis set limit as internal reference. An important aspect is the consideration of dispersion interactions in DFT methods, for which the dispersion‐correction by Grimme was employed. For all selected methods, the basis‐set dependence of calculated interaction energies was investigated. © 2015 Wiley Periodicals, Inc.     

Effect of an axial magnetic field on the performance of a quadrupole mass spectrometer

We consider the case of a quadrupole mass spectrometer (QMS) in which a static magnetic field is applied axially in the z-direction along the length of the mass filter. The theoretical approach assumed in the model is that the QMS contains hyperbolic rods as electrodes and that the magnetic field acts over the full length of the mass filter assembly. Initial experimental results with argon and helium for a low-resolution instrument confirm the predicted theoretical trends. The analysis also predicts for which values of operating parameters an enhancement of the instrument resolution is achieved when an axial magnetic field is applied. The model predicts instrument resolution R > 3000 for a QMS with a 200 mm long mass filter via application of an axial magnetic field.     

Anharmonic effect on unimolecular reactions with application to the photodissociation of ethylene

The importance of anharmonic effect on dissociation of molecular systems, especially clusters, has been noted. In this paper, we shall present a theoretical approach that can carry out the first principle calculations of anharmonic canonical and microcanonical rate constants of unimolecular reactions within the framework of transition state theory. In the canonical case, it is essential to calculate the partition function of anharmonic oscillators; for convenience, the Morse oscillator potential will be used for demonstration in this paper. In the microcanical case, which involves the calculation of the total number of states for the activated complex and the density of states for the reactant, we make use of the fact that both the total number of states and the density of states can be expressed in the inverse Laplace transformation of the partition functions and that the inverse Laplace transformation can in turn be carried out by using the saddle-point method. We shall also show that using the theoretical approach presented in this paper the total number of states and density of states can be determined from thermodynamic properties and the difference between the method used in this paper and the thermodynamic model used by Krems and Nordholm will be given. To demonstrate the application of our theoretical approach, we chose the photodissociation of ethylene at 157 and 193 nm as an example.     

Optimization of enzymatic biochemical logic for noise reduction and scalability: how many biocomputing gates can be interconnected in a circuit?

We report an experimental evaluation of the "input-output surface" for a biochemical AND gate. The obtained data are modeled within the rate-equation approach, with the aim to map out the gate function and cast it in the language of logic variables appropriate for analysis of Boolean logic for scalability. In order to minimize "analog" noise, we consider a theoretical approach for determining an optimal set for the process parameters to minimize "analog" noise amplification for gate concatenation. We establish that under optimized conditions, presently studied biochemical gates can be concatenated for up to order 10 processing steps. Beyond that, new paradigms for avoiding noise buildup will have to be developed. We offer a general discussion of the ideas and possible future challenges for both experimental and theoretical research for advancing scalable biochemical computing.