Mono and dinuclear rhodium, iridium and ruthenium complexes containing chelating 2,2′-bipyrimidine ligands: Synthesis, molecular structure, electrochemistry and catalytic properties

The mononuclear cations [(η⁵-C₅Me₅)RhCl(bpym)]⁺ (1), [(η⁵-C₅Me₅)IrCl(bpym)]⁺ (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(bpym)]⁺ (3) and [(η⁶-C₆Me₆)RuCl(bpym)]⁺ (4) as well as the dinuclear dications [{(η⁵-C₅Me₅)RhCl}₂(bpym)]²⁺ (5), [{(η⁵-C₅Me₅)IrCl}₂(bpym)]²⁺ (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(bpym)]²⁺ (7) and [{(η⁶-C₆Me₆)RuCl}₂(bpym)]²⁺ (8) have been synthesised from 2,2′-bipyrimidine (bpym) and the corresponding chloro complexes [(η⁵-C₅Me₅)RhCl₂]₂, [(η⁵-C₅Me₅)IrCl₂]₂, [(η⁶-PrⁱC₆H₄Me)RuCl₂]₂ and [(η⁶-C₆Me₆)RuCl₂]₂, respectively. The X-ray crystal structure analyses of [3][PF₆], [5][PF₆]₂, [6][CF₃SO₃]₂ and [7][PF₆]₂ reveal a typical piano-stool geometry around the metal centres; in the dinuclear complexes the chloro ligands attached to the two metal centres are found to be, with respect to each other, cis oriented for 5 and 6 but trans for 7. The electrochemical behaviour of 1-8 has been studied by voltammetric methods. In addition, the catalytic potential of 1-8 for transfer hydrogenation reactions in aqueous solution has been evaluated: All complexes catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide. For both the mononuclear and dinuclear series the best results were obtained (50 °C, pH 4) with rhodium complexes, giving turnover frequencies of 10.5 h⁻¹ for 1 and 19 h⁻¹ for 5.     

Mono and dinuclear arene ruthenium complexes containing 6,7-dimethyl-2,3-di(pyridine-2-yl)quinoxaline as chelating ligand: Synthesis and molecular structure

The mononuclear cations of the general formula [(η⁶-arene)RuCl(dpqMe₂)]⁺ (dpqMe₂ = 6,7-dimethyl-2,3-di(pyridine-2-yl)quinoxaline; arene = C₆H₆, 1; C₆H₅Me, 2; p-PrⁱC₆H₄Me, 3; C₆Me₆, 4) as well as the dinuclear dications [(η⁶-arene)₂Ru₂Cl₂(μ-dpqMe₂)]²⁺ (arene = C₆H₆, 5; C₆H₅Me, 6; p-PrⁱC₆H₄Me, 7; C₆Me₆, 8) have been synthesised from 6,7-dimethyl-2,3-di(pyridine-2-yl)quinoxaline (dpqMe₂) and the corresponding chloro complexes [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂, [(η⁶-C₆H₅Me)Ru(μ-Cl)Cl]₂, [(η⁶-p-PrⁱC₆H₄Me)Ru(μ-Cl)Cl]₂ and [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂, respectively. The X-ray crystal structure analyses of [1][PF₆], [3][PF₆] and [6][PF₆]₂ reveal a typical piano-stool geometry around the metal centre; in the dinuclear complexes the two chloro ligands, with respect to each other, are found to be trans oriented.     

Synthesis, characterization of novel half-sandwich iridium and rhodium complexes containing pyridine-based organochalcogen ligands

A series of neutral pyridine-based organochalcogen ligands, 2,6-bis(1-methylimidazole-2-thione)pyridine (Bmtp), 2,6-bis(1-isopropylimidazole-2-thione)pyridine (Bptp), and 2,6-bis(1-tert-butylimidazole-2-thione)pyridine (Bbtp) have been synthesized and characterized. Reactions of [Cp*M(μ-Cl)Cl]₂ (Cp* = η⁵-pentamethylcyclopentadienyl, M = Ir, Rh) with three pyridine-based organochalcogen ligands result in the formation of the complexes Cp*M(L)Cl₂ (M = Ir, L = Bmtp, 1a·Cl₂; M = Rh, L = Bmtp, 1b·Cl₂; M = Ir, L = Bptp, 2a·Cl₂; M = Rh, L = Bptp, 2b·Cl₂; M = Ir, L = Bbtp, 3a·Cl₂; M = Rh, L = Bbtp, 3b·Cl₂), respectively. All compounds have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of Bbtp, 1a·Cl₂, 1b·Cl₂, 2b·Cl₂ and 3b·Cl₂ have been determined by X-ray crystallography.     

Mono- and dinuclear ruthenium complexes of bridging ligands incorporating two di-2-pyridylamine motifs: Synthesis, spectroscopy and electrochemistry

Mono- and dinuclear ruthenium(II) complexes of six bridging ligands that contain a central arene (phenyl, naphthalenyl or biphenyl) core to which are attached two di-2-pyridylamine groups have been prepared. These complexes possess six-membered chelate rings. Full assignments of their ¹H NMR spectra are described which provides insight into the comformations of the ligands in these complexes. The extent of metal–metal communication in the dinuclear complexes was probed by electrochemical measurements and related to metal–metal distances.     

Bimetallic ruthenium-tin chemistry: Synthesis and molecular structure of arene ruthenium complexes containing trichlorostannyl ligands

A series of neutral, anionic and cationic arene ruthenium complexes containing the trichlorostannyl ligand have been synthesised from SnCl₂ and the corresponding arene ruthenium dichloride dimers [(η⁶-arene)Ru(μ₂-Cl)Cl]₂ (arene = C₆H₆, PrⁱC₆H₄Me). While the reaction with triphenylphosphine and stannous chloride only gives the neutral mono(trichlorostannyl) complexes [(η⁶-C₆H₆)Ru(PPh₃)(SnCl₃)Cl] (1) and [(η⁶-PrⁱC₆H₄Me)Ru(PPh₃)(SnCl₃)Cl] (2), the neutral di(trichlorostannyl) complex [(η⁶-PrⁱC₆H₄Me)Ru(NCPh)(SnCl₃)₂] (3) could be obtained for the para-cymene derivative with benzonitrile as additional ligand. By contrast, the analogous reaction with the benzene derivative leads to a salt composed of the cationic mono(trichlorostannyl) complex [(η⁶-C₆H₆)Ru(NCPh)₂(SnCl₃)]⁺ (5) and of the anionic tris(trichlorostannyl) complex [(η⁶-C₆H₆)Ru(SnCl₃)₃]⁻ (6). On the other hand, [(η⁶-PrⁱC₆H₄Me)Ru(μ₂-Cl)Cl]₂ reacts with SnCl₂ and hexamethylenetetramine hydrochloride or 18-crown-6 to give the anionic di(trichlorostannyl) complex [(η⁶-PrⁱC₆H₄Me)Ru(SnCl₃)₂Cl]⁻ (4), isolated as the hexamethylenetetrammonium salt or the chloro-tin 18-crown-6 salt. The single-crystal X-ray structure analyses of 1, 2, [(CH₂)₆N₄H][4], [(18-crown-6)SnCl][4] and [5][6] reveal for all complexes a pseudo-tetrahedral piano-stool geometry with ruthenium-tin bonds ranging from 2.56 (anionic complexes) to 2.60 Å (cationic complex).     

Organometallic ruthenium, rhodium and iridium complexes containing a P-bound thiophene-2-(N-diphenylphosphino)methylamine ligand: Synthesis, molecular structure and catalytic activity

Reaction of Ph₂PNHCH₂-C₄H₃S with [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂, [Ru(η⁶-benzene)(μ-Cl)Cl]₂, [Rh(μ-Cl)(cod)]₂ and [Ir(η⁵-C₅Me₅)(μ-Cl)Cl]₂ yields complexes [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 1, [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2, [Rh(Ph₂PNHCH₂-C₄H₃S)(cod)Cl], 3 and [Ir(Ph₂PNHCH₂-C₄H₃S)(η⁵-C₅Me₅)Cl₂], 4, respectively. All complexes were isolated from the reaction solution and fully characterized by analytical and spectroscopic methods. The structure of [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2 was also determined by single crystal X-ray diffraction. 1-4 are suitable precursors forming highly active catalyst in the transfer hydrogenation of a variety of simple ketones. Notably, the catalysts obtained by using the ruthenium complexes [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 1 and [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2 are much more active in the transfer hydrogenation converting the carbonyls to the corresponding alcohols in 98-99% yields (TOF ≤ 200 h⁻¹) in comparison to analogous rhodium and iridium complexes.     

Cationic arene ruthenium complexes containing chelating 1,10-phenanthroline ligands

The monocationic chloro complexes containing chelating 1,10-phenanthroline (phen) ligands [(arene)Ru(N∩N)Cl]⁺ (1: arene = C₆H₆, N∩N = phen; 2: arene = C₆H₆, N∩N = 5-NO₂-phen; 3: arene = p-MeC₆H₄Prⁱ, N∩N = phen; 4: arene = p-MeC₆H₄Prⁱ, N∩N = 5-NO₂-phen; 5: arene = C₆Me₆, N∩N = phen; 6: arene = C₆Me₆, N∩N = 5-NO₂-phen; 7: arene = C₆Me₆, N∩N = 5-NH₂-phen) have been prepared and characterised as the chloride salts. Hydrolysis of these chloro complexes in aqueous solution gave, upon precipitation of silver chloride, the corresponding dicationic aqua complexes [(arene)Ru(N∩N)(OH₂)]²⁺ (8: arene = C₆H₆, N∩N = phen; 9: arene = C₆H₆, N∩N = 5-NO₂-phen; 10: arene = p-MeC₆H₄Prⁱ, N∩N = phen; 11: arene = p-MeC₆H₄Prⁱ, N∩N = 5-NO₂-phen; 12: arene = C₆Me₆, N∩N = phen; 13: arene = C₆Me₆, N∩N = 5-NO₂-phen; 14: arene = C₆Me₆, N∩N = 5-NH₂-phen), which have been isolated and characterised as the tetrafluoroborate salts. The catalytic potential of the aqua complexes 8-14 for transfer hydrogenation reactions in aqueous solution has been studied: complexes 12 and 14 catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide with turnover numbers around 200 (80 °C, 7 h). In the case of 12, it was possible to observe the postulated hydrido complex [(C₆Me₆)Ru(phen)H]⁺ (15) in the reaction with sodium borohydride; 15 has been characterised as the tetrafluoroborate salt, the isolated product [15]BF₄, however, being impure. The molecular structures of [(C₆Me₆)Ru(phen)Cl]⁺ (1) and [(C₆Me₆)Ru(phen)(OH₂)]²⁺ (12) have been determined by single-crystal X-ray structure analysis of [1]Cl and [12](BF₄)₂.     

Ruthenium and rhodium nitrosyl complexes containing dichalcogenoimidodiphosphinate ligands

Interaction of [Ru(NO)Cl₃(PPh₃)₂] with K[N(R₂PS)₂] in refluxing N,N-dimethylformamide afforded trans-[Ru(NO)Cl{N(R₂PS)₂}₂] (R = Ph (1), Prⁱ (2)). Reaction of [Ru(NO)Cl₃(PPh₃)₂] with K[N(Ph₂PSe)₂] led to formation of a mixture of trans-[Ru(NO)Cl{N(Ph₂PSe)₂}₂] (3) and trans-[Ru(NO)Cl{N(Ph₂PSe)₂}{Ph₂P(Se)NPPh₂}] (4). Reaction of Ru(NO)Cl₃ · xH₂O with K[N(Ph₂PO)₂] afforded cis-[Ru(NO)(Cl){N(Ph₂PO)₂}₂] (5). Treatment of [Rh(NO)Cl₂(PPh₃)₂] with K[N(R₂PQ)₂] gave Rh(NO){N(R₂PQ)₂}₂] (R = Ph, Q = S (6) or Se (7); R = Prⁱ, Q = S (8) or Se (9)). Protonation of 8 with HBF₄ led to formation of trans-[Rh(NO)Cl{HN(Prⁱ₂PS)₂}₂][BF₄]₂ (10). X-ray diffraction studies revealed that the nitrosyl ligands in 2 and 4 are linear, whereas that in 9 is bent with the Rh–N–O bond angle of 125.7(3)°.     

Cationic half-sandwich complexes (Rh, Ir, Ru) containing 2-substituted-1,8-naphthyridine chelating ligands: Syntheses, X-ray structure analyses and spectroscopic studies

Reactions of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me) and [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh, Ir) with 2-substituted-1,8-naphthyridine ligands, 2-(2-pyridyl)-1,8-naphthyridine (pyNp), 2-(2-thiazolyl)-1,8-naphthyridine (tzNp) and 2-(2-furyl)-1,8-naphthyridine (fuNp), lead to the formation of the mononuclear cationic complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ {L = pyNp (1); tzNp (2); fuNp (3)}, [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ {L = pyNp (4); tzNp (5); fuNp (6)}, [(η⁵-C₅Me₅)Rh(L)Cl]⁺ {L = pyNp (7); tzNp (8); fuNp (9)} and [(η⁵-C₅Me₅)Ir(L)Cl]⁺ {L = pyNp (10); tzNp (11); fuNp (12)}. All these complexes are isolated as chloro or hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV/Vis spectroscopy. The molecular structures of [1]Cl, [2]PF₆, [4]PF₆, [5]PF₆ and [10]PF₆ have been established by single crystal X-ray structure analysis.     

Stepwise formation of metallo-prisms of iridium and rhodium complexes bearing pentamethylcyclopentadienyl ligands

Reactions of [M(Cp^∗)Cl(μ-Cl)]₂ (M = Ir(1a); M = Rh(1b)) with tridentate ligands tpt (tpt = 2,4,6-tripyridyl-1,3,5-triazine) gave the corresponding trinuclear complexes [M₃(Cp^∗)₃(μ₃-4-tpt-κN)Cl₆] (M = Ir(2a); M = Rh(2b)), which can be converted into hexanuclear complexes [M₆(Cp^∗)₆(μ₃-4-tpt-κN)₂(μ-Cl)₆](O₃SCF₃)₆ (M = Ir(3a); M = Rh(3b)) by treatment with AgO₃SCF₃, respectively. X-ray of 3b revealed that each of six pentamethylcyclopentadienyl metal moieties was connected by two μ-Cl-bridged atoms and a tridentate ligand to construct a cation triangular metallo-prism cavity with the volume of about 273 Å³ based on the distance of the two triazine moieties is 3.62 Å.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Reactions of half-sandwich rhodium(III) and iridium(III) compounds with pyridinethiolate ligands: Mono-, di-, and tri-nuclear complexes

Neutral trinuclear metallomacrocycles, [Cp^*RhCl(μ-4-PyS)]₃ (3) and [Cp^*IrCl(μ-4-PyS)]₃ (4) [Cp^* = pentamethylcyclopentadienyl, 4-PyS = 4-pyridinethiolate], have been synthesized by self-assembly reactions of [Cp^*RhCl₂]₂ (1) and [Cp^*IrCl₂]₂ (2) with lithium 4-pyridinethiolate, respectively. In situ reaction of complex 3 with three equivalent of lithium 4-pyridinethiolate resulted in [Cp^*Rh(μ-4-PyS)(4-PyS)]₃ (5) containing both skeleton and pendent 4-PyS groups. Chelating coordination of 2-pyridinethiolate broke down the triangular skeleton to give mononuclear metalloligands Cp^*Rh(2-PyS)(4-PyS) (6) and Cp^*Ir(2-PyS)(4-PyS) (7) [2-PyS = 2-pyridinethiolate], which could also be synthesized from Cp^*RhCl(2-PyS) (10) and Cp^*IrCl(2-PyS) (11) with lithium 4-pyridinethiolate. The coordination reactions of 6 with complexes 1 and 2 gave dinuclear complexes [Cp^*Rh(2-PyS)(μ-4-PyS)][Cp^*RhCl₂] (8) and [Cp^*Rh(2-PyS)(μ-4-PyS)][Cp^*IrCl₂] (9), respectively. Molecular structures of 3, 4, 6 and 11 were determined by X-ray crystallographic analysis. All the complexes have been well characterized by elemental analysis, NMR and IR spectra.     

Anticancer activity of new organo-ruthenium, rhodium and iridium complexes containing the 2-(pyridine-2-yl)thiazole N,N-chelating ligand

The dinuclear dichloro complexes [(η⁶-arene)₂Ru₂(μ-Cl)₂Cl₂] and [(η⁵-C₅Me₅)₂M₂(μ-Cl)₂Cl₂] react with 2-(pyridine-2-yl)thiazole (pyTz) to afford the cationic complexes [(η⁶-arene)Ru(pyTz)Cl]⁺ (arene = C₆H₆1, p-ⁱPrC₆H₄Me 2 or C₆Me₆3) and [(η⁵-C₅Me₅)M(pyTz)Cl]⁺ (M = Rh 4 or Ir 5), isolated as the chloride salts. The reaction of 2 and 3 with SnCl₂ leads to the dinuclear heterometallic trichlorostannyl derivatives [(η⁶-p-ⁱPrC₆H₄Me)Ru(pyTz)(SnCl₃)]⁺ (6) and [(η⁶-C₆Me₆)Ru(pyTz)(SnCl₃)]⁺ (7), respectively, also isolated as the chloride salts. The molecular structures of 4, 5 and 7 have been established by single-crystal X-ray structure analyses of the corresponding hexafluorophosphate salts. The in vitro anticancer activities of the metal complexes on human ovarian cancer cell lines A2780 and A2780cisR (cisplatin-resistant), as well as their interactions with plasmid DNA and the model protein ubiquitin, have been investigated.     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Graphite furnace atomic absorption spectrometric determination of iridium,rhodium and ruthenium in high-purity platinum after matrix extraction

Ir, Rh and Ru are separated from a large excess of platinum by extraction with isoamyl alcohol-isobutyl methyl ketone mixture. Graphite furnace atomic absorption spectrometry using the method of standard addition is then used to determine the metals with satisfactory precision and accuracy.     

The coordination chemistry and reactivity of amino-dithiaphospholanes with rhodium, iridium, and ruthenium

Novel amino-dithiaphospholane complexes of ruthenium, iridium, and rhodium were synthesized, and their properties were studied. Reaction of the new amino-dithiaphospholane (RS)₂ (R = binaphthyl, R′ = CH₂Ph, (rac)-4) with [RuCl₂(p-cymene)]₂ afforded [RuCl₂(p-cymene)((rac)-4)] in 67% isolated yield. Similarly, the new amino-dithiaphospholanes (RS)₂ (R = cyclohexyl, (rac)-7) and (RS)₂ (R = phenyl, 9) gave upon reaction with [RhCl(CO)₂]₂ and [IrCp^∗Cl₂]₂ the novel complexes [RhCl(CO)(L)₂] and [IrCp^∗Cl₂(L)] (L = (rac)-7, 9) in 61-96% yields. The ruthenium complex is catalytically active for the etherification of propargylic alcohols with methanol and ethanol (8-48 h, 90 °C, 40-85% isolated yields).     

Synthesis, structure, electrochemistry, photophysics and electroluminescence of 1,3,4-oxadiazole-based ortho-metalated iridium(III) complexes

Four new iridium(III) complexes 1-4, with 1,3,4-oxadiazole derivative as cyclometalated ligand for the first time, have been synthesized and structurally characterized by NMR, EA, MS and X-ray diffraction analysis (except 1). The stronger ligand field strength of the dithiolate ancillary ligands results in higher oxidation potentials and lower HOMO energy levels of complexes than acetylacetone. The absorption spectra of these complexes display low-energy metal-to-ligand charge transfer transition ranging from 350 to 500 nm. Complexes with dithiolate ancillary ligand emit at maximum wavelengths of ca. 500 nm, blue shifting 17 and 11 nm with respect to their counterpart with acetylacetone ligand. The electrophosphorescent devices with 2-4 as phosphorescent dopant in emitting layer have been fabricated. All devices have a low turn-on voltage in the range of 4.5 and 4.9 V. A high-efficiency green emission with maximum luminous efficiency of 5.28 cd/A at current density of 1.37 mA/cm² and a maximum brightness of 2592 cd/m² at 15.2 V has been achieved in device using 2 as emitter.     

Synthesis, structure, redox and spectra of green iridium complexes of tridentate azo-aromatic ligands

Reactions of IrCl₃·xH₂O with the ligands, 2-[(phenylamino)phenylazo]pyridine (HL^1a) and 2-[(p-tolylamino)phenylazo]pyridine (HL^1b) produce [Ir(L¹)₂]Cl (L¹ = L^1a, [1]Cl and L¹ = L^1b, [2]Cl) along with many unidentified products. The iridium complexes have been characterized by various techniques such as X-ray crystallography, mass spectrometry, ¹H and ¹³C NMR, cyclic voltammetry and absorption studies. The complex [1]ClO₄ crystallises in triclinic space group. The crystallographic data have been determined. Notably, the Ir-N (azo) lengths are short (av. 1·9875(4) ?) as compared to the remaining four Ir-N lengths (av. 2·052(5) ?). There is significant degree of ligand backbone conjugation in the coordinated ligands, which result in shortening of the C-N lengths on the other side of the middle phenyl ring and also in lengthening of the diazo (N=N) lengths. The complexes display multiple low energy transitions ranging between 1010 and 450 nm. These are electro active and show three reversible redox responses in the potential range, +1·5 V to −1·5 V. The cathodic potential responses are ascribed as ligand reductions, while the redox process at the anodic potential occurs at a mixed metal-ligand (HOMO) orbital.     

Syntheses and molecular structures of 18/16-electron half-sandwich iridium(III) complexes with chelating anilido-imine ligands

A 18-electron complex Cp^∗IrCl[o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)] (Cp^∗ = η⁵-pentamethylcyclopentadienyl) (1a) was obtained by the reaction of the lithium salt of o-C₆H₄N (C₆H₃-Me-p)(CHNHC₆H₃-Me-p) (L₁) with [Cp^∗IrCl(μ-Cl)]₂ in toluene. However, when bulkier ligands (L₂ = o-C₆H₄N(C₆H₃-Me-p)(CHNHC₆H₃-i-Me₂-2,6), L₃ = o-C₆H₄N(C₆H₃-Me-p) (CHNHC₆H₃-i-Pr₂-2,6)) were employed in the same reaction, two 16-electron complexes {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Me₂-2,6)]}⁺Cl⁻ (2b) and {Cp^∗Ir[o-C₆H₄N(C₆H₃-Me-p)(CHNC₆H₃-i-Pr₂-2,6)]}⁺Cl⁻ (3b) were formed. A 16-electron complex {Cp^∗Ir [o-C₆H₄N(C₆H₃-Me-p) (CHNC₆H₃-Me-p)]}⁺SO₃ CF⁻₃ (1b) bearing L₁ could be achieved by the reaction of 1a with AgSO₃CF₃ in CH₃CN solution. The molecular structures of 1a and 2b were determined by X-ray crystallography. Theoretical calculations of all the 18/16-electron species were performed to study their bonding characters and electronic properties. Electron donating effect of Cp^∗ and steric effect of anilido-imine ligand were considered as major factors in the formation of coordinative unsaturated complexes 1b, 2b, 3b.     

Preparation, characterization and structure of ruthenium phosphine complexes containing non-innocent ligands

Phosphine ruthenate complexes containing the non-innocent ligands 4-chloro-1,2-phenylenediamine (opda-Cl) and 3,3′,4,4′-tetraamminebiphenyl (diopda) were synthesized and characterized by means of X-ray diffraction, electrochemistry, ³¹P{¹H} NMR and electronic spectroscopies. Crystals of cis-[RuCl₂(dppb)(bqdi-Cl)] complex were isolated as a mixture of two conformational isomers due to different positions of the chlorine atoms of the o-phenylene ligand in relation to the P1 atom of the phosphine moiety.