Synthesis, characterization and reactivity of tetranuclear ruthenium hydrido clusters containing chiral phosphine ligands

The chiral clusters [H(4)Ru(4)(CO)(12-n)(L)(n)] (n = 1, 2; L = NMDPP), 1,1-[H(4)Ru(4)(CO)(10)(L-L)] (L-L = DUPHOS, DIPAMP), 1,2-[H(4)Ru(4)(CO)(10)(DIOP)] and [{H(4)Ru(4)(CO)(10)(DIOP)}(2)] have been synthesized by derivatizing the parent carbonyl cluster [H(4)Ru(4)(CO)(12)] with the appropriate mono- or didentate chiral phosphine ligand. The phosphine-substituted clusters were found to be able to catalyze the (asymmetric) hydrogenation of tiglic acid albeit with relatively low selectivity (enantiomeric excesses varying from 0 to 23%). It was found that the stability of the chiral ruthenium hydride clusters and the product distribution obtained in the catalytic reactions are dependent on the nature of the chiral phosphine. The crystal structures of [H(4)Ru(4)(CO)(12-n)(L)(n)] (n = 1, 2; L = NMDPP), 1,1-[H(4)Ru(4)(CO)(10)(L-L)] (L-L = DUPHOS, O-DUPHOS (partially oxygenated ligand), DIPAMP), 1,2-[H(4)Ru(4)(CO)(10)(DIOP)] and [{H(4)Ru(4)(CO)(10)(DIOP)}(2)] are presented.     

Synthesis and characterization of diiron ethanedithiolate complexes with monosubstituted phosphine ligands

Reactions of (μ-edt)Fe₂(CO)₆ (edt = SCH₂CH₂S) (1) with the monophosphine ligands Ph₂PCH₂Ph, Ph₂PC₆H₁₁, Ph₂PCH₂CH₂CH₃, or P(2-C₄H₃O)₃ in the presence of Me₃NO?2H₂O afforded (μ-edt)Fe₂(CO)₅L [L = Ph₂PCH₂Ph, 2; Ph₂PC₆H₁₁, 3; Ph₂PCH₂CH₂CH₃, 4; P(2-C₄H₃O)₃, 5] in 70–88% yields. Complexes 2–5 were characterized by spectroscopy and single crystal X-ray diffraction analysis. The phosphorus of 2–5 is in an apical position of the distorted octahedral geometry of iron.     

Syntheses and structural characterization of dinuclear and tetranuclear iron(III) complexes with dinucleating ligands and their reactions with hydrogen peroxide

The iron(III) complexes [Fe(2)(HPTB)(mu-OH)(NO(3))(2)](NO(3))(2).CH(3)OH.2H(2)O (1), [Fe(2)(HPTB)(mu-OCH(3))(NO(3))(2)](NO(3))(2).4.5CH(3)OH (2), [Fe(2)(HPTB)(mu-OH)(OBz)(2)](ClO(4))(2).4.5H(2)O (3), [Fe(2)(N-EtOH-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3CH(3)OH.1.5H(2)O (4), [Fe(2)(5,6-Me(2)-HPTB)(mu-OH)(NO(3))(2)](ClO(4))(NO(3)).3.5CH(3)OH.C(2)H(5)OC(2)H(5).0.5H(2)O (5), and [Fe(4)(HPTB)(2)(mu-F)(2)(OH)(4)](ClO(4))(4).CH(3)CN.C(2)H(5)OC(2)H(5).H(2)O (6) were synthesized (HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, N-EtOH-HPTB = N,N,N',N'-tetrakis(N' '-(2-hydroxoethyl)-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane, 5,6-Me(2)-HPTB = N,N,N',N'-tetrakis(5,6-dimethyl-2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane). The molecular structures of 2-6 were established by single-crystal X-ray crystallography. Iron(II) complexes with ligands similar to the dinucleating ligands described herein have been used previously as model compounds for the dioxygen uptake at the active sites of non-heme iron enzymes. The same metastable (mu-peroxo)diiron(III) adducts were observed during these studies. They can be prepared by adding hydrogen peroxide to the iron(III) compounds 1-6. Using stopped-flow techniques these reactions were kinetically investigated in different solvents and a mechanism was postulated.     

Nickel(II) complexes containing bidentate amido phosphine ligands derived from alpha-iminophosphorus ylides: synthesis and structural characterization

The reactions of prop-2-ynyltriphenylphosphonium bromide with a series of primary aromatic or aliphatic amines in refluxing acetonitrile generated the corresponding 2-hydrocarbylaminoprop-1-enyltriphenylphosphonium bromide [RNHC(Me)=CHPPh(3)]+Br- (R = 2,6-C(6)H(3)iPr(2) (1a), 2,6-C(6)H(3)Me(2) (1b), Ph (1c), t-Bu (1d)) as crystalline solids. Deprotonation of 1a-d with NaH in THF at -35 degrees C afforded the alpha-iminophosphorus ylides RN=C(Me)CH=PPh(3) (2a-d) in high yield. Spectroscopic and crystallographic data of 2 suggest a strong intramolecular interaction between the imino nitrogen and the phosphorus atom. In contrast to N-arylated 2a-c, the N-tert-butyl-derived 2d is extremely moisture-sensitive. Hydrolysis of 2d led to elimination of benzene and generated concomitantly the phosphine oxide 3d that contains an ene-amine functionality. The reactions of 2a-c with Ni(COD)(2) in the presence of an excess amount of pyridine in toluene produced the divalent nickel complexes of the type [kappa(2)-RNC(Me)=CHPPh(2)]Ni(Ph)(Py) (4a-c). The solution and solid-state structures of these new compounds are presented.     

The preparation and structural characterization of ruthenium carbonyl cluster complexes containing 3,3 dimethylthietane ligands

The reaction of Ru₃(CO)₁₂ with 3,3 dimethylthietane (DMT) at 68°C yielded the new tetraruthenium cluster complex Ru₄(CO)₁₂(-SCH₂CMe₂CH₂)₂,1 in 23% yield. Compound1 was characterized crystallographically and was shown to consist of a puckered square of four ruthenium atoms with two DMT ligands bridging opposite sides of the cluster via the sulfur atoms. Compound1 reacts with CO (98°C/1 atm) to yield the new tetraruthenium complex Ru₄(CO)₁₃ (-SCH₂CMe₂CH₂),2 in 69% yield. Compound2 consists of a butterfly tetrahedral cluster of four ruthenium atoms with a DMT ligand bridging the wing-tip metal atoms. Addition of DMT to2 regenerates1 in 67% yield. Crystal data—1: space group = ,a=17.490(2) Å,b=18.899(3) Å,c=9.781(1) Å, =93.06(1)°, =91.06(1)°, =105.239(9)°,Z=4, 5799 reflections,R=0.026; for2: space group = P2₁/n,a=15.430(3) Å,b=18.285(4) Å,c=9.850(2) Å, =90.05(2)°,Z=4, 2111 reflections,R=0.036.     

Synthesis and characterization of supramolecular complexes of a tetranuclear metallocycle with platinum(II) bis-ethynylphenylethynylpyridine organometallic complexes

A novel Pt(II) organometallic complex with 4-(4-ethynyl-phenylethynyl)-pyridine (DEBPy-H), namely [Pt(dppp)(DEBPy)₂] (dppp = 1,3-bis-(diphenylphosphino)-propane), has been prepared by two synthetic routes. The DEBPy-H ligand was prepared by a shorter synthetic pathway and in higher yield than the method of previous reports. New Pt(II) organometallic complexes with DEBPy-H and four bidentate ligands [Pt(L–L)(DEBPy)₂] (L–L = 1,2-bis-(diphenylphosphino)-benzene, bis-(dicyclohexyl)-ethane, 4,4′-dimethyl-2,2′-bipyridine, or 5,5′-dimethyl-2,2′-bipyridine) have also been prepared. These five Pt(II) complexes have two pyridyl units as an available coordination site that can operate as a metalloligand in nanoscale tectonics. A supramolecular complex of a tetranuclear metallocycle, [Pt(dppp)(DEBPy)₂]₂[Pt(dppp)]₂(OTf)₄, was synthesized from [Pt(dppp)(DEBPy)₂] and [Pt(dppp)(OTf)₂] as a corner connection through coordination-driven self-assembly. This supramolecular Pt(II) complex exists as a tetranuclear structure of the square type according to the interpretation of the ESI-mass and NMR spectra in solution. Five Pt(II) organometallics demonstrated the formation of similar tetranuclear metallocycles with [Pt(dppp)(OTf)₂], as indicated by their ESI-mass and UV–vis spectra in solution.     

Experimental and theoretical characterization of Ru(II) complexes with polypyridine and phosphine ligands

The synthesis and the experimental and theoretical characterization of ruthenium hydride complexes containing phosphorus and polypyridine ligands [RuH(CO)(N-N)(PPh₃)₂]⁺ with N-N = dppz 1, dppz-CH₃2 (2.1 isomer), dppz-Cl 3 (3.1 isomer), ppl 4, and 2,2′-biquinoline 5, (where dppz = dipyrido[3,2-a:2′,3′-c]phenazine), are presented. ¹H NMR, ³¹P NMR, ¹³C NMR, IR-FT, UV-Vis and elemental analysis are used to characterize the complexes. Optimized molecular geometries in the gas phase at the B3LYP/LACVP(d,p) level showed a distorted octahedral structure for ruthenium, the phosphine ligands are localized in a trans position, while the polypyridine ligand, which in all the cases is planar except in 5, adopt a trans position relative to the carbon monoxide and hydride ligands. The theoretical absorption spectra (one hundred excited states) were calculated for the seven complexes by the time dependent density functional theory (TD-DFT) in the gas phase. They predicted very well the UV-Vis spectra. It was possible to identify the character of each electronic transition and the fragments of the complexes involved in it. Theoretical evidence of the substituent effect in the polypyridine ligand and of the ligand effect (dppz, biq, ppl) was found, displayed mainly in the longer wavelength band. The theoretical results showed that the properties of these complexes can be tuned with changes localized in the polypyridine ligand covalently bonded to ruthenium.     

Bent and linear trinuclear nickel complexes with ligands derived from N -acylsalicylhydrazide ligands: structural characterization and bioactivity

Two trinuclear Ni(II) complexes Ni₃(L₁)₂(py)₂(DMF)(H₂O) (1) and Ni₃(L₂)₂(py)₂(DMF)₂ (2) with two new trianionic pentadentate ligands N-(3,5-dimethylbenzoyl)-salicylhydrazide (H₃L₁) and N-(phenylacetyl)-5-nitrosalicylhydrazide (H₃L₂) have been synthesized and characterized by X-ray crystallography. Nickel ions in the two complexes have square-planar/octahedral/square-planar coordination. Central metal ion and two terminal metal ions in the two complexes are combined by two bridging deprotonated ligands, forming a trinuclear structural unit with an M–N–N–M–N–N–M core. Studies on the trinuclear Ni(II) complexes show that the β-branched N-acylsalicylhydrazide ligands with sterically flexible Cα methylene groups yield linear trinuclear Ni(II) complexes, while α-branched N-acylsalicylhydrazide ligands tend to form bent trinuclear Ni(II) complexes. Antibacterial screening data in a previous study indicates that bent trinuclear Ni(II) compound 1 is more active than linear compound 2 and less active than a tetranuclear nickel compound.     

Dinuclear triple helicates with diazine ligands: X-ray structural, electrochemical, and magnetic studies

A series of dinuclear complexes of Mn(III), Fe(III), and Co(III) with two diazine Schiff bases, H2salhn and H2mesalhn, is reported. The Schiff bases are prepared by condensation reactions of hydrazine with salicylaldehyde (H2salhn) and with 2-hydroxyacetophenone (H2mesalhn) in 1:2 mol ratio. X-ray crystallographic characterization reveals triple helical structures of [Co2(salhn)3], [Co2(mesalhn)3], and [Fe2(mesalhn)3]. In each complex, three dinucleating O,N,N,O donor ligands provide three diazine (=N-N=) bridges between the metal ions and facial O3N3 coordination spheres around them. The ligands are twisted about the N-N single bond and coordinate to the two metal ions in a helical fashion to generate the triple helical structure. The dicobalt(III) complex of mesalhn2- is D3-symmetric, while the diiron(III) analogue is very close to being of this symmetry. On the other hand, the dicobalt(III) complex of salhn2- significantly deviates from the ideal D3-symmetry due to the large range covered by the twist angles of the three ligands. In the crystal lattice of these complexes, intermolecular C-H...O, C-H...N, O-H...O, C-H...Cl, and pi-pi interactions involving the complex and the solvent molecules lead to one- and two-dimensional supramolecular structures. The complexes [Fe2(mesalhn)3] and [Co2(mesalhn)3] are redox active and display two successive metal-centered reductions on the cathodic side of Ag/AgCl reference electrode. Weak antiferromagnetic spin-coupling is operative between the two metal ions in [Mn2(salhn)3] (J = -0.57(1) cm(-1)) and in [Fe2(mesalhn)3] (J = -2.82(4) cm(-1)).     

S K-edge X-ray absorption studies of tetranuclear iron-sulfur clusters: mu-sulfide bonding and its contribution to electron delocalization.

X-ray absorption spectroscopy (XAS) at the sulfur ( approximately 2470 eV) and chlorine ( approximately 2822 eV) K-edges has been applied to a series of 4Fe-4S model complexes. These are compared to 2Fe-2S model complexes to obtain insight into the localized ground state in the mixed-valence dimer versus the delocalized ground state in the mixed-valence tetramer. The preedges of hypothetical delocalized mixed-valence dimers [Fe(2)S(2)](+) are estimated using trends from experimental data and density functional calculations, for comparison to the delocalized mixed-valence tetramer [Fe(4)S(4)](2+). The differences between these two mixed-valence sites are due to the change of the sulfide-bridging mode from micro(2) to micro(3). The terminal chloride and thiolate ligands are used as spectator ligands for the electron density of the iron center. From the intensity of the preedge, the covalency of the terminal ligands is found to increase in the tetramer as compared to the dimer. This is associated with a higher effective nuclear charge on the iron in the tetramer (derived from the energies of the preedge). The micro(3)-bridging sulfide in the tetramer has a reduced covalency per bond (39%) as compared to the micro(2)-bridging sulfide in the dimer (51%). A simple perturbation model is used to derive a quadratic dependence of the superexchange coupling constant J on the covalency of the metal ions with the bridging ligands. This relationship is used to estimate the superexchange contribution in the tetramer (J = -156 cm(-)(1)) as compared to the mixed-valence dimer (J = -360 cm(-)(1)). These results, combined with estimates for the double exchange and the vibronic coupling contributions of the dimer sub-site of the tetramer, lead to a delocalized S(t) = (9)/(2) spin ground state for the mixed-valence dimer in the tetramer. Thus, the decrease in the covalency, hence the superexchange pathway associated with changing the bridging mode of the sulfides from micro(2) to micro(3) on going from the dimer to the tetramer, significantly contributes to the delocalization of the excess electron over the dimer sub-site in the tetramer.     

Iron carbonyl cluster complexes with monophosphine ligands: synthesis,characterization, and crystal structure

Three new monophosphine-substituted iron carbonyl cluster complexes [(μ-PDT)Fe₂(CO)₅L] [(PDT = SCH₂CH₂CH₂S, L = P(CH₂Ph)₃, 1; P(C₆H₁₁)₃, 2; PPh₂(PhMe-p), 3)], which can be regarded as active site mimics for [FeFe]-hydrogenase, have been prepared in 40–70 % yields by reactions of the parent complex (μ-PDT)Fe₂(CO)₆ (A) with monophosphine ligands in the presence of the decarbonylating agent Me₃NO·2H₂O. All three complexes were characterized by elemental analysis and spectroscopic techniques, as well as by X-ray crystallography for complex 1. The IR spectra of the complexes reveal that the electron-donating abilities of the different monophosphine ligands follow the order PPh₂(PhMe-p) > P(C₆H₁₁)₃ > P(CH₂Ph)₃.     

Synthesis and structural characterization of di- and tetranuclear zinc complexes with phenolate and carboxylate bridges. Correlations between 13C NMR chemical shifts and carboxylate binding modes

Two di- and a tetranuclear zinc-carboxylate complexes with different coordination modes, [Zn(2)L(mu(1,3)-OAc)(2)](ClO(4)) (1), [Zn(2)L(mu(1,3)-Pro)(2)](ClO(4)) (2), and [Zn(2)L(mu(1,1)-HCO(2))(mu(1,3)-HCO(2))](2)(ClO(4))(2) (3) (where L = 2,6-bis(N-2-(2'-pyridylethyl)formimidoyl)-4-methylphenol, OAc = acetate, and Pro = propionate) have been synthesized. Their compositions and structures have been identified by elemental analyses, IR, NMR, and X-ray single-crystal diffraction. The cations in both 1 and 2 reveal that the two zinc ions are assembled by a phenolate and a pair of syn-syn mu(1,3)-carboxylate bridges with metal-metal distances of 3.281 and 3.331 A, respectively, and each polyhedron around the zinc ion is a slightly distorted trigonal bipyramid. Compound 3 is a tetranuclear complex consisting of two identical dinuclear subunits that connect to each other by the two formate groups. In each subunit, the pair of metal ions separated at 3.130(1) A is assembled by a phenolate oxygen from L, and a monodentate and a syn-syn bidentate formate bridges. The formate group displays a novel tridentate mode, namely, monodentate and syn-anti bidentate bridges. On the other hand, the solid-state (13)C NMR technique was employed to distinguish the different binding modes of acetate group in five-coordinate zinc complexes. The chemical shifts are as follows: chelating mode (ca. 184 ppm) > bidentate bridge (ca. 180 ppm) > monodentate bridge (ca. 176 ppm).     

Synthesis, structural characterization, and photophysical properties of palladium and platinum(II) complexes containing 7,8-benzoquinolinate and various phosphine ligands

A series of mononuclear cyclometalated benzo[h]quinolinate platinum and palladium(II) complexes with phosphine ligands, namely, [M(bzq)ClL] (L=PPh2H, Pt 1, Pd 2; PPh2CCPh, Pt 3, Pd 4), [Pt(bzq)(PPh2H)(PPh2CCPh)]ClO4 5, [Pt(bzq)(PPh2C(Ph)=C(H)PPh2)]ClO4 6, and [Pt(bzq)(CCPh)(PPh2CCPh)] (7a, 7b), were synthesized. The X-ray crystal structures of 1, 6.CH3COCH3.1/2CH3(CH2)4CH3, and 7b.CH3COCH3 have been determined. In 1, the metalated carbon atom and the P atom are mutually cis, whereas in 7b they are trans located. For complex 6, C and N are crystallographically indistinguishable. Reaction of [Pt(bzq)(mu-Cl)]2 with PPh2H and excess of NEt3 leads to the phosphide-bridge platinum dimer [Pt(bzq)(mu-PPh2)]2 8 (X-ray). Moderate pi-pi intermolecular interactions and no evident Pt-Pt interactions are found in 1, 7b, and in 8. All of the complexes exhibit absorption bands at high energy due to the intraligand transitions (1IL pi --> pi) and absorptions at lower energy which are attributed to MLCT (5d) pi --> pi (CLambdaN) transition. Platinum complexes show strong luminescence in both solid state and frozen solutions. The influence of the coligands on the photophysics of the platinum complexes has been examined by absorption and emission spectroscopy.     

Synthesis and structural characterization of two copper complexes with long rigid ligands

Two copper complexes with long rigid ligands, Cu(Tta)₂(L¹) (I), and Cu(Tta)₂(L²) (II), where L₁ = (E)-3-(4-(1H-benzo[d]imidazol-1-yl)-(4-phenyl)phenyl)-1-phenylprop-2-en-1-one, L² = (E)-3-(4-(1H-imidazol-1-yl)phenyl)-1-(4-phenyl)phenyl)prop-2-en-1-one), have been synthesized and characterized. The single-crystal X-ray analysis (CIF files CCDC nos. 1409671 (I) and 1409672 (II)) for complexes I and II demonstrates that each copper ion assumes a distorted square-pyramidal MO₄N polyhedron in which four oxygen atoms come from the Tta ligands, and one nitrogen atom comes from the N-donor ligand. Both of the complexes are linked into 3D networks through weak intermolecular interactions.     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012