Acceptor substituted N-heterocyclic carbenes and their Rh(I)complexes: Synthesis, structure and properties

Rhodium(I) complexes of acceptor substituted N-heterocyclic carbenes were obtained either by transmetalation from the corresponding Ag(I) complexes or by thermal decomposition of corresponding pentafluorobenzene carbene adducts. All complexes were fully characterized by means of NMR- and mass spectroscopy. Compounds 5, 6, 7 and 11 were although characterized by single-crystal X-ray analysis. The relative σ-donor/π-acceptor strength of the NHC ligands was determined by means of IR spectroscopy. Dimerisation behaviour of Rh carbonyl complexes was studied.     

Synthesis and reactivity of substituted cyclopentadienyl rhodium(I) and (III) complexes

New cyclopentadienyl derivatives of rhodium COD complexes [Cp*=C₅H₄COOCH₂CHCH₂ (1); C₅H₄CH₂CH₂CHCH₂ (2); C₅H(i-C₃H₇)₄ (3)] and carbonyl complex [Cp*=C₅H(i-C₃H₇)₄ (4)] were synthesized from [RhCl(COD)]₂ and [RhCl(CO)₂]₂. 1, 2 and 3 oxidized by iodine gave iodine bridged dimers 5, 6 and 7, respectively. Triphenyl phosphine, carbon monoxide and carbon disulfide molecules broke down the iodine bridged structure easily and produced monomer products Cp*RhI₂L [Cp*=C₅H₄COOCH₂CHCH₂, L=CS₂ (8); L=PPh₃ (9). Cp*=C₅H(i-C₃H₇)₄, L=CO (10)]. All of these new compounds were characterized by elemental analysis, ¹H NMR, IR, UV-Vis and mass spectroscopy. The crystal structure of 1 was solved in the triclinic space group with one molecule in the unit cell, the dimensions of which are a=7.082(9) Å, b=8.392(3) Å, c=13.889(5) Å, α=101.19(3)°, β=99.06(6)°, γ=105.11(5)°, and V=763(1) ų. The crystal structure of 3 was solved in the orthorhombic space group Pn21a with four molecules in the unit cell, the dimensions of which are a=9.748(3) Å, b=16.054(5) Å, and V=2319(1) ų. Least squares refinement leads to values for the conventional R₁ of 0.0251 for 1 and 0.0558 for 3, respectively. Compared to that in 1, a shorter metal-ligand bond length in 3 was observed and this is attributed to the rich electron density on Rh(I) metal center piled up by the C₅H(i-C₃H₇)₄ ligand.     

Heteroleptic half-sandwich Ru(II), Rh(III) and Ir(III) complexes based on 5-ferrocenyldipyrromethene

The synthesis and characterization of heteroleptic complexes with the formulations [(η⁶-arene)RuCl(fcdpm)] (η⁶-arene = C₆H₆, C₁₀H₁₄) and [(η⁵-C₅Me₅)MCl(fcdpm)] (M = Rh, Ir; fcdpm = 5-ferrocenyldipyrromethene) have been reported. All the complexes have been characterized by elemental analyses, IR, ¹H NMR and electronic spectral studies. Structures of [(η⁶-C₆H₆)RuCl(fcdpm)] and [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] have been determined crystallographically. Chelating monoanionic linkage of fcdpm to the respective metal centres has been supported by spectral and structural studies. Further, reactivity of the representative complex [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] with ammonium thiocyanate (NH₄SCN) and triphenylphosphine (PPh₃) have been examined.     

Solvent-dependent interconversions between Rh(I), Rh(II), and Rh(III) complexes of an aryl-monophosphine ligand

Reaction of the aryl-monophosphine ligand alpha(2)-(diisopropylphosphino)isodurene (1) with the Rh(I) precursor [Rh(coe)(2)(acetone)(2)]BF(4) (coe=cyclooctene) in different solvents yielded complexes of all three common oxidation states of rhodium, depending on the solvent used. When the reaction was carried out in methanol a cyclometalated, solvent-stabilized Rh(III) alkyl-hydride complex (2) was obtained. However, when the reaction was carried out in acetone or dichloromethane a dinuclear eta(6)-arene Rh(II) complex (5) was obtained in the absence of added redox reagents. Moreover, when acetonitrile was added to a solution of either the Rh(II) or Rh(III) complexes, a new solvent-stabilized, noncyclometalated Rh(I) complex (6) was obtained. In this report we describe the different complexes, which were fully characterized, and probe the processes behind the remarkable solvent effect observed.     

Half-sandwich Ru(II), Ir(III) and Rh(III) complexes with bridging or chelating N-heterocyclic bis-carbene ligand: Synthesis and characterization

N-heterocyclic bis-carbene ligand (bis-NHC) which was derived from 1,1′-diisopropyl-3,3′-ethylenediimidazolium dibromide (L·2HBr) via silver carbene transfer method, reacted with [(η⁶-p-cymene)RuCl₂]₂ and [Cp^∗MCl₂]₂ (Cp^∗ = η⁵-C₅Me_5, M = Ir, Rh) respectively, afforded complexes [(η⁶-p-cymene)RuCl₂]₂(L) (1), [Cp^∗IrCl₂]₂(L) (2) and [Cp^∗RhCl(L)][Cp^∗RhCl₃] (3). When [Cp^∗IrCl₂]₂ was treated with 2 equiv AgOTf at first, and then reacted with bis-NHC ligand, [Cp^∗IrCl(L)]OTf (4) was obtained. The molecular structures of complexes 1-4 were determined by X-ray single crystal analysis, showing that 1 and 2 adopted bridging coordination mode, 3 and 4 adopted chelating coordination mode. All of these complexes were characterized by ¹H, ¹³C NMR spectroscopy and element analysis.     

Synthesis reactivity and electrochemical properties of substituted cyclopentadienyl cobalt (III) complexes

Cyclopentadienyl cobalt complexes (η⁵‐C₅H₄R) CoLI₂ [L = CO,R=‐COOCH₂CH=CH₂ (3); L=PPh₃, R=‐COOCH₂‐CH=CH₂ (6); L=P(p‐C₆H₄O₃)₃, R = ‐COOC(CH₃) = CH₂ (7), ‐COOCH₂C₆H₅ (8), ‐COOCH₂CH = CH₂ (9)] were prepared and characterized by elemental analyses, ¹H NMR, ER and UV‐vis spectra. The reaction of complexes (η⁵‐C₅H₄R)CoLI₂ [L= CO, R= ‐COOC(CH₃) = CH₂ (1), ‐COOCH₂C₆H₅(2); L=PPh₃, R=‐COOC (CH₃) = CH₂ (4), ‐COOCH₂C₆H₅ (5)] with Na‐Hg resulted in the formation of their corresponding substituted cobaltocene (η⁵‐C₅H₄R)₂ Co[R=‐COOC(CH₃) = CH₂ (10), ‐COOCH₂C₆H₅ (11)]. The electrochemical properties of these complexes 1–11 were studied by cyclic voltammetry. It was found that as the ligand (L) of the cobalt (III) complexes changing from CO to PPh₃ and P(p‐tolyl)₃, their oxidation potentials increased gradually. The cyclic voltammetry of α,α′‐substituted cobaltocene showed reversible oxidation of one electron process.     

Tetramethyl(2-methylthioethyl)cyclopentadienyl complexes of zirconium(iv): synthesis,crystal structure,and dynamic behavior in solutions

Chelating sulfur-containing cyclopentadienyl ligand tetramethyl(2-methylthioethyl)cyclopentadiene (1), was synthesized for the first time. Its sodium (2a) and lithium (2b) derivatives were isolated in the crystalline state. Starting from compound1 some novel Zr^IV complexes were prepared: [tetramethyl(2-methylthioethyl)cyclopentadienylltriclllorozirconium (3), bis[tetramethyl(2-methylthioethyl)cyclopentadienylldichlorozirconium (4), and [pentamethylcyclopentadienyll [tetramethyl(2-methylthioethyl)cyclopentadienylldichlorozirconium (5). The crystal structures of3 and5 were determined by X-ray diffraction analysis. The dynamic behavior of complex3 in various solvents was investigated by¹H and¹³C N MR spectroscopy. The SZr coordination bond was shown to exist in complex3 both in the crystalline state and in solution. No coordination of this type was found in compounds4 and5.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 984–992, April, 1996.     

Synthesis, structure and reactivity of homobimetallic Rh(I) and Ir(I) complexes of s- and as-indacene-diide

The Rh(COD) and Ir(COD) homobimetallic complexes of s-indacene-diide, 2,6-dimethyl-s-indacene-diide, as-indacene-diide, and 2,7-dimethyl-as-indacene-diide have been synthesized from the di-lithium salts of the dianions and metal dimers [M(μ-Cl)L₂]₂ (M = Rh, Ir; L₂ = COD, NBD, (ethylene)₂, (CO)₂ as mixtures of syn and anti isomers. The syn/anti ratio depends on the nature of the ancillary ligands at the metal and on the s or as geometry of the bridging ligand. In the reaction of the 2,7-dimethyl-as-indacene-diide-[M(COD)]₂ species with CO, the higher reactivity of the syn isomers has been justified on the basis of a greater instability of the ground state due to steric interactions between the COD groups. Bis-η¹ metal-bonded intermediates have been identified in the carbonylation of iridium derivatives; on the other hand, the formation of the bis-η⁵ mixed complexes syn and anti-{2,7-dimethyl-as-indacene-diide-[Rh(COD)][Rh(CO)₂]} and their reactivity strongly support the existence of metal---metal interaction in the rhodium derivatives.     

Synthetic, structural, spectroscopic, and electrochemical studies of mixed sandwich Rh(III) and Ir(III) complexes involving Cp* and tridentate macrocycles

The syntheses, structures, spectroscopy, and electrochemistry for six Ir(III) and Rh(III) mixed sandwich mononuclear complexes involving tridentate macrocycles and pentamethylcyclopentadienide (Cp*) are reported. The complexes are readily prepared by direct ligand substitution reactions from the dichloro bridged binuclear complexes, [{M(Cp*)(Cl)₂}₂]. All complexes have the general formula [M(L)(Cp*)]X₂ (M = Ir(III) or Rh(III), L = macrocycle, or Cl⁻) and exhibit a distorted octahedral structure involving three donor atoms from the macrocycle and the facially coordinating carbocyclic Cp* ligand. The complex cations include: [Rh(η⁵ -Cp*)(9S3)]²⁺ (1), [Rh(η⁵-Cp*)(9N3)]²⁺ (2), [Rh(η⁵-Cp*)(10S3)]²⁺ (3), [Ir(η⁵-Cp*)(9S3)]²⁺ (4), [Ir(η⁵-Cp*)(9N3)]²⁺ (5), and [Ir(η⁵-Cp*)(10S3)]²⁺ (6), where 9S3 = 1,4,7-trithiacyclononane, 9N3 = 1,4,7-triazacyclononane, and 10S3 = 1,4,7-trithiacyclodecane. The structures for all six complexes are supported by ¹H and ¹³C{¹H} NMR spectroscopy, and five complexes are also characterized by single-crystal X-ray crystallography (complexes 1-5). The ¹H NMR splittings between the two sets of methylene protons for both the Rh(III) and Ir(III) 9S3 complexes are much larger (0.4 vs. 0.2 ppm) compared to those in the two 9N3 complexes. Similarly, the ¹³C{¹H} NMR spectra in all four thioether complexes show that the ring carbons in the Cp* ligand are shifted by over 10 ppm downfield compared to the azacrown complexes. The electrochemistry of the complexes is surprisingly invariable and is dominated by a single irreversible metal-centered reduction near −1.2 V vs. Fc/Fc⁺.     

Coordination chemistry of ester-functionalized cp ligands: synthesis and catalytic activity of [Rh{CpCO2(CHPh)2OH}(NBD)] and [Rh{CpCO2(CH2)3OH}(NBD)]

Two new sodium hydroxyalkoxycarbonylcyclopentadienide salts Na[rac-CpCO₂(CHPh)₂OH] (1) and Na[(2S,3S)-CpCO₂(CHPh)₂OH] (2) were prepared by reaction of NaCp with the five-membered cyclic carbonates cis-4,5-diphenyl-1,3-dioxolan-2-one and (4S,5S)-4,5-diphenyl-1,3-dioxolan-2-one. The reaction of these salts with [Rh(NBD)Cl]₂ gave [Rh{rac-CpCO₂(CHPh)₂OH}(NBD)] (3) and (−)-[Rh{(2S,3S)-CpCO₂(CHPh)₂OH}(NBD)] (4) whose catalytic activity in the hydroformylation of hex-1-ene and styrene has been investigated and compared with that of the previously reported rhodium complexes [Rh{CpCO₂(CHR)₂OH}(NBD)] (R=H, Me). In addition we also discuss some preliminary results regarding the behavior of these complexes in the hydrogenation of the same substrates. The reactivity of NaCp toward the six-membered cyclic carbonate 1,3-dioxan-2-one has also been studied and it has been found that the reaction leads to two cyclopentadienide anions [CpCO₂(CH₂)₃OH]⁻ (5) and [CpCO₂(CH₂)₃OC(O)O(CH₂)₃OH]⁻ (6) in amounts strictly dependent on the carbonate/NaCp stoichiometric ratio.     

Synthesis and characterization of Ru(III), Rh(III), Pt(IV) and Ir(III) thiosemicarbazone complexes

Ru(III), Rh(III), Pt(IV) and Ir(III) complexes of 2-furfural thiosemicarbazone as ligand have been synthesised. These complexes have the composition [M(ligand)₂X₂]X (M = Ru(III) Rh(III) and Ir(III) X = Cl and Br) and [Pt(ligand)₂ X₂] X₂ (X = Cl, Br and 1/2SO₄). The deprotonated ligand forms the complexes of the formulae M(ligand-H)₃ and Pt(ligand-H)₃Cl. All these complexes have been characterized by elemental analysis, magnetic measurements, electronic and infrared spectral studies. All the complexes are six-coordinate octahedral.     

Chiral bisphospholane ligands (Me-ketalphos): synthesis of their Rh(I) complexes and applications in asymmetric hydrogenation

Rhodium complexes of functionalized bisphospholane ligands (S,S,S,S-Me-ketalphos) 1 and (R,S,S,R-Me-ketalphos) 2 have been used as catalyst precursors for the asymmetric hydrogenation of several different types of functionalized olefins and have achieved high enantioselectivities.     

Rhodium(III), palladium(II) and platinum(II) complexes of Bis(o-aminobenzenesulfonyl)ethylenediamine

New complexes of the formulae K₃[RhL ₃]·2 H₂O, [PdL]·H₂O and [M(LH₂)Cl₂] [whereM = Pd, Pt andLH₂ = bis(o-aminobenzenesulfonyl)ethylenediamine] have been prepared and characterized by conductivity measurements, thermogravimetric analysis, X-ray powder patterns and IR, Ligand Field and¹H-NMR spectroscopy.

---

Rhodium(III), Palladium(II)- und Platin(II)-Komplexe mit Bis(o-aminobenzolosulfonyl)ethylendiamin (Kurze Mitteilung)

Zusammenfassung Neue Komplexe der allgemeinen Formeln K₃[RhL ₃]·2H₂O, [PdL]·H₂O und [M(LH₂)Cl₂] mitM = Pd, Pt undLH₂ = Bis(o-aminobenzolosulfonyl)ethylendiamin wurden dargestellt und mit Konduktionsmessungen, thermogravimetrischen Analysen, Röntgenstrukturanalysen, IR, Ligandfeld- und¹H-NMR-Spektroskopie charakterisiert.

     

Rh(III), Pd(II), Pt(IV) and Au(III) complexes of 2-thiopyrimidine derivatives

Some news thiopyrimidine derivatives and complexes [4-amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidine (TANH), its 2-methylthio derivative (MTH), the ammonium salt ofTANH (sTANH) and six new complexes of formulas: Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃ Pd(TANH)₂Cl₂ and Au(TAN ^–)Cl] have been synthesized and characterized by elemental analysis, IR and¹H-NMR spectroscopy techniques. The thermal behaviour of all compounds has also been studied.

---

Rh(III), Pd(II), Pt(IV) und Au(III) Komplexe von 2-Thiopyrimidin Derivaten

Zusammenfassung Es wurden einige neue Thiopyrimidinderivate und deren Komplexe synthetisiert und mittels Elementaranalyse, IR und¹H-NMR charakterisiert: 4-Amino-5-nitroso-6-oxo-1,2,3,6-tetrahydro-2-thio-pyrimidin (TANH), dessen 2-Methylthio-Derivat (MTH), das Ammoniumsalz vonTANH (sTANH) und sechs neue Komplexe der Formeln Rh(MT)₂Cl · 2H₂O, Pd(MTH)₂Cl₂, Pt(MTH)₂Cl₄, Au(MTH)Cl₃, Pd(TANH)₂Cl₂ und Au(TAN ^–)Cl. Das thermische Verhalten der Verbindungen wurde ebenfalls untersucht.

     

Synthesis,characterization and biological studies of alkenyl‐substituted titanocene(IV) carboxylate complexes

The carboxylate compounds [Ti(η⁵‐C₅H₅)(η⁵‐C₅H₄{CMe₂(CH₂CH₂CH?CH₂)})(O₂CCH₂SXyl)₂] (2; Xyl = 3,5‐Me₂C₆H₃) and [Ti(η⁵‐C₅H₅)(η⁵‐C₅H₄{CMe₂(CH₂CH₂CH?CH₂)})(O₂CCH₂SMesl)₂] (3; Mes 1 = 2,4,6‐Me₃C₆H₂) were synthesized by the reaction of [Ti(η⁵‐C₅H₅)(η⁵‐C₅H₄{CMe₂(CH₂CH₂CH?CH₂)})Cl₂] (1) with 2 equivalents of xylylthioacetic acid or mesitylthioacetic acid, respectively. Compounds 2 and 3 were characterized by spectroscopic methods. The cytotoxic activity of 1–3 was tested against human tumor cell lines from four different histogenic origins—8505C (anaplastic thyroid cancer), DLD‐1 (colon cancer) and the cisplatin sensitive A253 (head and neck cancer) and A549 (lung carcinoma)—and compared with those of the reference complex [Ti(η⁵‐C₅H₅)₂Cl₂] (R1) and cisplatin. Surprisingly, the cytotoxic activities of the carboxylate derivatives were lower than those of their corresponding dichloride analogue (1). However, complexes 1–3 were more active than titanocene dichloride against all the studied cells with the exception of complex 2 against A253 and A549 cell lines. DNA‐interaction tests were also carried out. Solutions of all the studied complexes were treated with different concentrations of fish sperm DNA, observing modifications of the UV spectra with intrinsic binding constants of 2.99 × 10⁵, 2.45 × 10⁵, and 2.35 × 10⁵ M ^?1 for 1–3. Structural studies based on density functional theory calculations of 2 and 3 were also carried out. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Solid-state mechanochemical synthesis of cobalt(III), iron(III), and chromium(III) bisdicarbollyl complexes

Thallous dicarbollide reacts with cobalt(II), iron(III) and chromium(III) chlorides without a solvent under conditions of mechanical activation to form the corresponding carborane complexes of tervalent metals. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1715–1717, October, 1993.     

Aluminum(III), gallium(III), and indium(III) 4-hydroxyacridinato complexes

4-Hydroxyacridine (HAcr) is an O,N-chelating ligand whose coordination chemistry toward group 13 M(III) ions has received little attention. The molecular structure of HAcr consists of a 2,3-disubstituted-8-hydroxyquinoline; thus, in order to compare 8-hydroxyquinoline (HQ), 2-methyl-8-hydroxyquinoline (HMeQ′), and 2,3-disubstituted-8-hydroxyquinoline (HAcr) for steric and/or electronic influence, HAcr chelating ability toward the Al(III), Ga(III), and In(III) triad has been investigated. Irrespective of the nature of M(III), only complexes containing two equivalents of deprotonated HAcr are obtained. This article describes the synthesis and characterization of different series of bis-chelated pentacoordinated (Acr)₂MY (M = Al, Ga, In; Y = Cl, Br, I, NCS, N₃) or (Acr)₂MZ (M = Ga or In; HZ = C₆H₅OH, C₆H₁₃OC₆H₄OH, C₆H₅COOH, or C₆H₁₃OC₆H₄COOH) six-coordinate neutral (Acr)₂In(acac) (H(acac) =acetylacetone), or ionic [(Acr)₂In(N,N)][CF₃SO₃] (N,N = 2,2′-bipyridine or 1,10-phenanthroline) complexes. These results significantly contribute to elucidating the complexation capability of HAcr.     

Success and serendipity during studies aimed at preparing carbenerhodium(I) complexes

The preparation of a series of new square-planar and half-sandwich type carbenerhodium(I) complexes will be described. The key to success is the use of the bis(stibane)rhodium compound trans-[RhCl(C₂H₄)(SbiPr₃)₂] as starting material from which in a stepwise manner the complexes trans-[RhCl(=CRR′)(SbiPr₃)₂] (L = PiPr₃, AsiPr₃, SbEt₃) and [C₅H₅Rh(=CCR′)L] (L = SbiPr₃, PiPr₃, PMe₃, CO, CNtBu) have been obtained. Displacement of the carbene ligand in either trans-[RhCl(=CPH₂)L₂]L = SbiPr₃, PiPr₃ or [C₅H₅Rh(=CPh₂)(PiPr₃)] by CO or CNtBu leads to the formation of the corresponding carbonyl- or isocyanidrhodium compounds and the C---C coupling products Ph₂C=C=O and Ph₂C=C=NtBu, respectively. The carbene ligand is also involved in the selective formation of the isomeric olefins CH₂=CHCPh₂H and Ph₂C=CHCH₃ on treatment of trans-[RhCl(=CPh₂)(SbiPr₃)₂] and trans-[RhCl(=CPh₂)(PiPr₃)₂] with ethene. The most spectacular reaction of the bis(triisopropylstibane) complexes, however, occurs on warming of trans-[RhCl(=CRR′)(SbiPr₃)₂] in the absence of any substrate which yields the first representatives of dinuclear transition-metal compounds containing a tertiary stibane ligand in a bridging position. Some exploratory studies on the reactivity of the Rh₂(μ-SbiPr₃) complexes indicate that the triisopropylstibane can be replaced by SbMe₃, SbEt₃ or CNtBu without destroying the dimetallic core of the molecule.