Cathodic stripping voltammetry of orotic acid (vitamin B13) at the hanging mercury drop electrode (HMDE)

Summary Controlled adsorptive accumulation of orotic acid (vitamin B₁₃) at the hanging mercury drop electrode (HMDE) provides the basis for the direct stripping measurement of that compound in nanomolar concentration. Differential pulse voltammetry applied to a sample at pH 11.20 fixed in NaOH has a detection limit of 5.0 × 10^–10 mol/l of orotic acid (with 3 min of preconcentration).The cathodic stripping response is evaluated with respect to experimental parameters such as preconcentration time, preconcentration potential, bulk concentration and other parameters. Cathodic stripping voltammetry can be proposed for the determination of the orotic acid, the reproducibility of this method was studied.

---

Cathodic-Stripping Voltammetrie von Orotsäure (Vitamin B₁₃) an der hängenden Quecksilbertropfelektrode

     

Adsorption voltammetric techniques for the determination of uranium(VI) with 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone as complex forming reagent

Uranium (VI) can be determined by adsorptive voltammetric techniques, as its chloranilic acid complex, over a wide concentration range. Differential pulse polarography is useful for quantification of uranium between 0.1 and 1.5 mg/l; for the range from 10 to 500 g/l differential pulse voltammetry and for ultra-trace analysis between 0.024 and 40 g/l adsorptive stripping voltammetry are preferred. The standard deviation for the 3-detection limit of 24 ng/l uranium was found to be 8%. In the trace analysis of metals in aquatic environmental systems by adsorptive stripping voltammetry it is normally necessary to decompose polluted water samples by UV irradiation or microwave digestion. The advantage of the developed method is the fact that no sample pretreatment is necessary.Dedicated to Professor R. Geyer on the occasion of his 80th birthday     

Square-Wave Cathodic Stripping Voltammetry of Marcellomycine. A Sensitive Analytical Method

Abstract

Square-wave adsorptive stripping voltammetry has been applied to the determination of a new cytostatic anthracyclinic compound, marcellomycine. 100-fold and 1000-fold increases of sensitivity have been found with regard to the differential pulse stripping voltammetry and differential pulse polarography respectively. The detection limit is fixed at 5 × 10^?9 M.     

Electrochemical behavior and voltammetric determination of the herbicide metribuzin at mercury electrodes

The electrochemical behavior of the herbicide metribuzin (4-amino-6-tert-butyl-4,5-dihydro-3-methylthio-1,2,4-triazin-5-one) at mercury electrodes was studied in aqueous solutions by direct current (DC) and tast polarography, differential pulse (DPV) and cyclic voltammetry (CV), and controlled-potential coulometry. The electrolysis products were separated and identified by chromatographic techniques combined with mass spectrometric detection. The reduction process in acid media includes two irreversible steps. In the first four-electron step the N–NH₂ and the 1,6-azomethine bonds are reduced. The second step leads to the formation of 5-tert-butyl-2,3,4,5-tetrahydroimidazol-4-one at the mercury-pool electrode. The first reduction step combined with adsorptive accumulation of the herbicide molecule at the mercury electrode surface was used for its determination by differential pulse adsorptive stripping voltammetry (DPAdSV). Calibration curves were linear in the range 1–30 μg L^–1 with a detection limit of 0.27 μg L^–1 (1 nmol L^–1) under the conditions used (buffer pH 4.5, E_acc = –0.45 V relative to Ag/AgCl and t_acc = 10 s). Preconcentration on solid-phase extraction columns (SPE-phenyl) was used for the determination of very small amounts of metribuzin in river water samples. Recovery was approximately 97%. The reproducibility of the analytical procedure including SPE treatment and DPV determination was expressed as relative standard deviations of 2.53 and 3.66% for 2 and 6 μg L^–1 metribuzin, respectively.     

Study of the electrochemical behaviour of metaclazepam in aqueous media and its determination in biological fluids

Summary The polarographic behaviour of metaclazepam in Britton Robinson universal buffer has been investigated by the following techniques: DC tast and differential pulse polarography, cyclic voltammetry, microcoulometry and adsorptive stripping voltammetry. The compound is polarographically active over the entire pH-range, showing a single well-defined wave. This has been characterized as being a 2e^– diffusion-controlled wave in acid media. The reduction step is due to the C=N group. The drug is also surface-active and the adsorption at the electrode is higher in alkaline than in acid media. A stripping method for the determination of this psychotropic drug at the sub-micromolar and nanomolar concentration levels is described. Adsorptive accumulation for 300 s followed by differential pulse measurement in Britton Robinson buffer at pH 9.1 can be used for the determination of metaclazepam in urine with an accuracy and precision of 2% and 3%, respectively. The detection limit was 0.55 ng per ml of urine (adsorptive accumulation at –0.60 V for 300 s).     

Simultaneous voltammetric determination of cobalt, nickel and labile zinc, using 2-quinolinethiol in the presence of surfactants without prior digestion

2-Quinolinethiol forms very stable cobalt and nickel complexes, which are strongly chemisorbed on the hanging mercury drop electrode (HMDE). This allows the simultaneous determination of cobalt, nickel and labile zinc traces; Co and Ni by differential pulse adsorptive stripping voltammetry (DPAdSV) and Zn by differential pulse sweep voltammetry (DPSV), even in the presence of a large amount of surfactant like Triton X-100. This is advantageous for determining these metals directly in natural waters, without previous UV-irradiation or acid digestion. The surfactant does not only not interfere, but shows a beneficial effect with respect to the resolution between copper and nickel peaks. The method has been tested in estuary waters. The determination limits are 1 nmol/l Ni, 10 nmol/l Co and 1 mol/l Zn, with RSD less than 6.3%.     

Electrochemical determination of carbaryl oxidation in natural water and soil samples

An electrochemical method for the determination of carbaryl, after prior oxidation to 1,4-naphthoquinone in natural water and soils is reported. The coulometric oxidation of carbaryl at a platinum electrode was studied using 0.024 mol/L Britton-Robinson buffer (pH 7.0). The reduction of the oxidation product 1,4-naphthoquinone at a dropping mercury electrode was used for the indirect determination of carbaryl after separation on C₁₈ Sep-pak cartridges by differential pulse polarography (detection limits: 0.41 mg L^?1 of water and 0.47 mg kg^?1 of soil) and directly without separation by adsorptive stripping voltammetry (detection limits: 5 μg L^?1 of water and 7 μg kg^?1 of soil, for 75 s preconcentration time). Relative errors were lower than 3.7% and relative standard deviations smaller than 4.5%.     

Determination of Cobalt Ions in Natural Waters Using Differential Pulse Adsorptive Stripping Voltammetry

Abstract

Differential pulse adsorptive stripping voltammetry using dimethylglyoxime complexes in the presence of triethanolamine and ammonium chloride can be applied to the determination of cobalt (II) ions in natural waters with high sensitivity. The limit of detection is about 3 ppt. Actual analysis of estuary water are reported. In this particular case of natural water, the factors influencing the use of differential pulse adsorptive stripping voltammetry for the determination of cobalt are described in detail.     

Catalytic Adsorptive Stripping Voltammetric Determination of Cobalt and Nickel as Their α‐Furil Dioxime Complexes

The exploitation of the catalytic‐adsorptive effect in the Co(II)‐dioxime‐nitrite systems provides a significant increase of the Co adsorptive stripping voltammetric response and subsequently the influence of the interfering elements such as Ni and Zn is strongly diminished. The purpose of the present paper was to study voltammetric properties of Co and Ni in a supporting electrolyte containing ammonia buffer, α‐furil dioxime in the absence and in the presence of nitrite, by differential pulse polarography and adsorptive stripping voltammetry. Results of detailed studies aimed at optimizing the analytical parameters for simultaneous catalytic adsorptive stripping voltammetric determination of Co and Ni in the form of complexes with α‐furil dioxime in the presence of Zn matrix are presented. In the supporting electrolyte of composition 0.1 M NH₄Cl, 0.5 M NH₃, 4×10^?5 M αFD, 0.5 M NaNO₂ the linearity range amounts from 0.03 to 2.4 μg/L for Co and from 0.3 to 9 μg/L for Ni for 20 s of accumulation. The method enables the determination of Co and Ni in the presence of a great excess of Zn with the detection limit equal to 0.02 μg/L Co and 0.2 μg/L Ni obtained for a 20 s accumulation time.     

Determination of the pesticide Chlorpyrifos by cathodic adsorptive stripping voltammetry

The adsorption behavior and differential pulse cathodic adsorptive stripping voltammetry of the pesticide Chlorpyrifos (CP) were investigated at the hanging mercury drop electrode (HMDE). The pesticide was accumulated at the HMDE and a well-defined stripping peak was obtained at –1.2 V vs Ag/AgCl electrode at pH 7.50. A voltammetric procedure was developed for the trace determination of Chlorpyrifos using differential pulse cathodic adsorptive stripping voltammetry (DP-CASV). The optimum working conditions for the determination of the compound were established. The peak current was linear over the concentration range 9.90 × 10^–8– 5.96 × 10^–7 mol/L of Chlorpyrifos. The influence of diverse ions and some other pesticides was investigated. The analysis of Chlorpyrifos in commercial formulations and treated waste water was carried out satisfactorily     

Determination of zinc, cadmium, lead and copper in soils and sewage sludges by microprocessor-controlled voltammetry in comparison with atomic absorption spectrometry

Summary Information on the heavy metal contents in soils and sewage sludges is of strong ecological interest. For control of the maximum allowed concentrations photometric and atomic absorption spectrometric methods have been developed for the determination of the single elements; sample digestion is carried out using hydrochloric acid and nitric acid.Differential pulse polarography and differential pulse anodic stripping voltammetry allow the simultaneous determination of different heavy metals in one digestion solution according to their electrochemical behaviour. This possibility is given, for instance, for zinc, cadmium, lead and copper. The adequate procedure was tested with a microprocessor-controlled polarograph. Flame atomic absorption spectrometry was used as reference method.

---

Bestimmung von Zink, Cadmium, Blei und Kupfer in Böden und Klärschlämmen durch mikroprozessorgesteuerte Voltammetrie im Vergleich mit der Atomabsorptionsspektrometrie

     

Voltammetric Determination of Selected Aminoquinolines Using Carbon Paste Electrode

Optimum conditions have been found for voltammetric determination of mutagenic 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline by differential pulse voltammetry and adsorptive stripping differential pulse voltammetry on carbon paste electrode. The lowest limits of determination were found for adsorptive stripping differential pulse voltammetry in 0.1 mol dm^?3 H₃PO₄ (5×10^?7 mol dm^?3 , 1×10^?7 mol dm^?3, and 1×10^?7 mol dm^?3 for 5‐aminoquinoline, 6‐aminoquinoline and 3‐aminoquinoline, respectively). The possibility to determine mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 5‐aminoquinoline or 6‐aminoquinoline, and mixtures of 5‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline by differential pulse voltammetry was verified. Binary mixtures of 8‐aminoquinoline with 3‐aminoquinoline or 6‐aminoquinoline, and of 3‐aminoquinoline with 5‐aminoquinoline could be successfully analyzed.     

Electrochemical behavior and voltammetric determination of the herbicide metribuzin at mercury electrodes

The electrochemical behavior of the herbicide metribuzin (4-amino-6-tert-butyl-4,5-dihydro-3-methylthio-1,2,4-triazin-5-one) at mercury electrodes was studied in aqueous solutions by direct current (DC) and tast polarography, differential pulse (DPV) and cyclic voltammetry (CV), and controlled-potential coulometry. The electrolysis products were separated and identified by chromatographic techniques combined with mass spectrometric detection. The reduction process in acid media includes two irreversible steps. In the first four-electron step the N-NH2 and the 1,6-azomethine bonds are reduced. The second step leads to the formation of 5-tert-butyl-2,3,4,5-tetrahydroimidazol-4-one at the mercury-pool electrode. The first reduction step combined with adsorptive accumulation of the herbicide molecule at the mercury electrode surface was used for its determination by differential pulse adsorptive stripping voltammetry (DPAdSV). Calibration curves were linear in the range 1-30 microg L(-1) with a detection limit of 0.27 microg L(-1) (1 nmol L(-1)) under the conditions used (buffer pH 4.5, Eacc = -0.45 V relative to Ag/AgCl and tacc = 10 s). Preconcentration on solid-phase extraction columns (SPE-phenyl) was used for the determination of very small amounts of metribuzin in river water samples. Recovery was approximately 97%. The reproducibility of the analytical procedure including SPE treatment and DPV determination was expressed as relative standard deviations of 2.53 and 3.66% for 2 and 6 microg L(-1) metribuzin, respectively.     

An electroanalytical study of the anticancer drug dacarbazine

The electrochemical behaviour of dacarbazine [5-(3,3-dimethyl-1-triazenyl) imidazole-4-carboxamide; DTIC] was investigated by Tast and differential pulse polarography (d.p.p.) at the dropping mercury electrode, by cyclic and differential pulse voltammetry at the hanging mercury drop electrode and by anodic voltammetry at the glassy carbon electrode. Calibration graphs were obtained for 2×10^?8?2×10^?5 M DTIC by d.p.p., for 5×10^?9?1×10^?5 M by adsorptive stripping voltammetry ar a hanging mercury drop electrode, and for 1?10×10^?5 M by high-performance liquid chromatography with oxidative amperometric detection at a glassy carbon electrode. The methods are compared and applied to determine DTIC added to blood serum after a simple clean-up procedure.     

Electrochemical methods for monitoring of environmental carcinogens

The use of modern electroanalytical techniques, namely differential pulse polarography, differential pulse voltammetry on hanging mercury drop electrode or carbon paste electrode, adsorptive stripping voltammetry and high performance liquid chromatography with electrochemical detection for the determination of trace amounts of carcinogenic N-nitroso compounds, azo compounds, heterocyclic compounds, nitrated polycyclic aromatic hydrocarbons and aromatic and heterocyclic amines is discussed. Scope and limitations of these methods are described and some practical applications based on their combination with liquid-liquid or solid phase extraction are given.     

Present potential of electrochemical methods for metal determinations in reference materials

Summary Based on high-pressure ashing, the potential to determine some trace metals (Zn, Cd, Pb, Cu, Ni, Co, Al, Tl, Cr, Fe) by anodic or cathodic stripping voltammetry in the square wave (SWV) and differential pulse modes (DPASV) is described. In comparison to the differential pulse mode, the square wave mode shows advantages for cathodic stripping and for zinc determination.New developments by use of potentiometric stripping analysis (PSA) permit the determination of Pb and Cd in whole blood without sample pretreatment and Pb, Cd, and Cu in milk and milk powder with simple pretreatment.Mercury film microelectrodes prepared by electrodeposition of Hg onto a carbon fiber were used for the rapid multicomponent trace determination of heavy metals in very small (5 l) samples by voltammetry and potentiometry.

---

Gegenwärtiges Potential elektrochemischer Methoden für Metallbestimmungen in Referenzmaterialien

     

Adsorptive stripping voltammetry of chlordiazepoxide at the hanging mercury drop electrode

Controlled adsorptive accumulation at the hanging mercury drop electrode enables 0.8–11 × 10^?5 M chlordiazepoxide to be quantified by differential-pulse stripping voltammetry with accumulation times of 1–3 min. With 3-min accumulation, the peak current is enhanced 12-fold for 1.0 × 10^?7 M chlordiazepoxide compared to the current from differential pulse polarography. The detection limit is 0.9 × 10^?9 M for 4-min accumulation. The procedure is applied to spiked human serum after preseparation of the drug on a Sep-Pak C₁₈ cartridge.     

Inversvoltammetrische Bestimmungen von Blei, Cadmium, Kupfer und Zink in Grundwasser und Leitungswasser

Zusammenfassung Die inverse Voltammetrie ist für Schwermetallbestimmungen in Grund- und Leitungswasser geeignet. Das wird durch die Qualitätskriterien der Werte und den Vergleich mit atomabsorptionsspektrometrischen Messungen gezeigt. Beim Grundwasser tritt die Art der Probenahme als wichtige Einflußgröße hervor. Stagniertes Wasser in Hausinstallationen zeigt bis zu 10fache Konzentrationen, verglichen mit den durch kräftiges Abfließen erreichbaren Minimalwerten. Die Wassertemperatur ist hierfür eine gute Beurteilungshilfe.

---

Determination of lead, cadmium, copper and zinc in ground water and tap water by anodic stripping voltammetry

Summary Heavy metals in ground water and tap water can be determined by differential pulse anodic stripping voltammetry (DPASV). This is shown by the quality criteria of the results and by comparison with AAS values. Concentrations down to 0.1 g/l are detectable. The way of sampling turns out to be quite important for ground water results. Heavy metal content in tap water is influenced by the retention time in the domestic pipes. Stagnation values are up to ten times the minimum concentration measured after heavy discharge. Water temperature is shown to be a good criterion for heavy metal concentration in that case.

Diese Arbeit wurde von der Deutschen Forschungsgemeinschaft unterstützt.     

Determination of the pesticide Chlorpyrifos by cathodic adsorptive stripping voltammetry

The adsorption behavior and differential pulse cathodic adsorptive stripping voltammetry of the pesticide Chlorpyrifos (CP) were investigated at the hanging mercury drop electrode (HMDE). The pesticide was accumulated at the HMDE and a well-defined stripping peak was obtained at –1.2 V vs Ag/AgCl electrode at pH 7.50. A voltammetric procedure was developed for the trace determination of Chlorpyrifos using differential pulse cathodic adsorptive stripping voltammetry (DP-CASV). The optimum working conditions for the determination of the compound were established. The peak current was linear over the concentration range 9.90 × 10^–8– 5.96 × 10^–7 mol/L of Chlorpyrifos. The influence of diverse ions and some other pesticides was investigated. The analysis of Chlorpyrifos in commercial formulations and treated waste water was carried out satisfactorily Received: 10 July 1997 / Revised: 1 April 1998 / Accepted: 6 April 1998     

Voltammetric studies of a psychotropic drug with nitro groups. Determination of flunitrazepam in urine using HMDE

The adsorption behaviour of flunitrazepam at the hanging mercury drop electrode was studied by staircase voltammetry and by adsorptive stripping differential pulse voltammetry. Flunitrazepam is adsorbed in the whole potential range, from the most positive values up to the reduction potential. Flunitrazepam reduction product is also adsorbed. The time dependence of the voltammetric response proves that a diffusion-controlled adsorption takes place. Flunitrazepam can be determined (down to nanomolar levels) by using adsorptive preconcentration prior to the differential pulse voltammetric scan. An application of such a method to flunitrazepam determination in human urine is described. The detection limit was 30 ng per milliliter of urine with a 20-sec accumulation time; the mean relative standard deviation was lower than 3.2% and the mean recovery 97.8%.