Flat Supercontinuum Generated in a Single-Mode Optical Fibre with a New Chromatic Dispersion Profile

A new chromatic dispersion profile of a single-mode optical fibre is proposed for generating a supercontinuum with a flatly broadened spectrum. The chromatic dispersion D(A, z) is a convex function of wavelengths and has no zero-dispersion wavelengths over the whole part of the fibre as D(A, z) is negative. It is shown that the flat supercontinuum spectrum is obtained when the pump wavelength is set in the vicinity of the wavelength at which the peak chromatic dispersion is near zero and the strong residual pump component is eliminated.     

Supercontinuum spectra generation in the single-mode optical fibre with concave dispersion profile

In this paper, a new method is proposed to generate broad supercontinuum (SC) spectra in the single-mode optical fibre with concave dispersion profile. We numerically simulate pulse evolutions and discuss physics mechanism in detail for SC spectrum generation in the optical fibre with concave dispersion profile. Furthermore, general criteria are presented for specifying the shape of SC spectrum by introducing normalized parameters, which are related to the fibres and the initial pump pulses. The results show that the flat and broad SC spectra are indeed generated in our proposed optical fibre.     

Effects of pulse chirp on supercontinuum produced in dispersion decreasing fibre

The supercontinuum (SC) source plays a key role in wavelength division multiplexing over the optical time division multiplexing (WDM/OTDM) transmission system. The SC produced in dispersion decreasing fibre (DDF) is wider and flatter than that produced in dispersion shifted fibre (DSF). In this paper, a SC producing process in DDF is numerically simulated, the effects of pump pulse chirp on the SC width and flatness are initially studied and the corresponding theoretical explanations are given. Particularly, we have analysed and compared the evolutions of the SC along DDF pumped by different chirp pulses. Several valuable conclusions are obtained.     

Ultra-Broadened Supercontinuum Generation in a Novel Dispersion-Flattened and Decreasing Fibre

A new approach is introduced to enhance supercontinuum （SC） spectrum in a dispersion-flattened/decreasing fibre with a convex dispersion profile. A flat SC spectrum nearly extending from 1200hm to 2100hm can be generated based on this scheme. It is found that group-velocity dispersions （GVD） and self-phase modulation （SPM） effects are the primary factors for pump Raman scattering （SRS） effect plays an essential self-steepening effect can be ignored. pulse compression and SC spectrum generation, stimulated role on the final SC-spectrum bandwidth and flatness, but     

Broad and ultra-flattened supercontinuum generation in the visible wavelengths based on the fundamental mode of photonic crystal fibre with central holes

By coupling a train of femtosecond pulses with 100 fs pulse width at a repetition rate of 76 MHz generated by a mode-locked Ti:sapphire laser into the fundamental mode of photonic crystal fibre(PCF) with central holes fabricated through extracting air from the central hole,the broad and ultra-flattened supercontinuum(SC) in the visible wavelengths is generated.When the fundamental mode experiences an anomalous dispersion regime,three phases in the SC generation process are primarily presented.The SC generation(SCG) in the wavelength range from 470 nm to 805 nm does not emerge significant ripples due to a higher pump peak power and the corresponding mode fields at different wavelengths are observed using Bragg gratings.The relative intensity fluctuations of output spectrum in the wavelength ranges of 530 nm to 640 nm and 543 nm to 590 nm are only 0.028 and 0.0071,respectively.     

The system of L-band 2×10 Gb/s WDM transmission over conventional single mode fibre with 600 km by chirped fibre Bragg gratings dispersion compensation

A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel $\lambda _{1}=1570.83$~nm; 80th channel $\lambda _{2}=1603.57$ nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a $2\times 10$ Gb/s wavelength division multiplexing (WDM) L-band transmission of 600 km based on conventional single mode fibre (G.652 fibre) is performed without forward error correction. The bit error rate (BER) is less than 10$^{ - 12}$ and the power penalties of the 2{nd} and 80{th} channel of L-band are 1.8~dB and 2.0~dB, respectively.     

The system of L-band 2 × 10 Gb/s WDM transmission over conventional single mode fibre with 600 km by chirped fibre Bragg gratings dispersion compensation

A chirped fibre Bragg grating according to ITU-T suggested L-band （2nd channel λ1 = 1570.83 nm; 80th channel λ2 = 1603.57 nm） with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a 2 × 10 Gb/s wavelength division multiplexing （WDM） L-band transmission of 600 km based on conventional single mode fibre （G.652 fibre） is performed without forward error correction. The bit error rate （BER） is less than 10-12 and the power penalties of the 2nd and 80th channel of L-band are 1.8 dB and 2.0 dB, respectively.     

Photoelectric Hybrid Optical Bistable Device Using Fibre Bragg Gratings with Two Feed Signals

A photoelectric hybrid optical bistable device (OBD) is investigated by using fibre Bragg gratings as a lightintensity modulator. A new operation with two feed signals is proposed, and with this method the output characteristic of the OBD is remarkably improved. The potential application of such a device in optic stabilizer for fibre laser is also briefly discussed.     

Inflation in de Sitter spacetime and CMB large scale anomaly

The influence of cosmological constant-type dark energy in the early universe is investigated. This is accommodated by a new dispersion relation in de Sitter spacetime. We perform a global fit to explore the cosmological parameter space by using the Cosmo MC package with the recently released Planck TT and WMAP polarization datasets. Using the results from the global fit, we compute a new CMB temperature–temperature(TT) spectrum.The obtained TT spectrum has lower power compared with that based on the ΛCDM model at large scales.     

Analysis of sampled fiber Bragg gratings polarization-maintaining fiber

A novel type of sampled fiber Bragg gratings (FBGs) written in polarization-maintaining fiber (PMF) is proposed.The reflection spectrum,time delay,and group velocity dispersion (GVD) of the gratings are an- alyzed.In addition,the reflection spectrum is optimized by apodization.The scheme of multi-wavelength output based on the gratings is proposed,which could be used as a multi-wavelength polarization filter in the density wavelength division multiplexed (DWDM) system.     

Improved high birefringence photonic crystal fibres with dispersion flattened and single mode operation

A kind of improved high birefringence photonic crystal fibre (PCF) is proposed in this paper. The characteristics of birefringence, dispersion and leakage loss are studied by the multipole method. Numerical results show that the improved PCF possesses the properties of a flat dispersion and single mode operation. Moreover, with the operating wavelength λ = 1.55μm, the modal birefringence increases greatly in comparison with that of the original PCF, and the leakage loss is about 10⁴ times smaller than that of the original PCF because the modification gives rise to the strong confinement of guided modes. It is expected that the improved PCF can be used as high birefringence and dispersion flattened fibres.     

Polarization dependent dispersion and its impact on optical parametric process in high nonlinear microstructure fibre

High nonlinear microstructure fibre （HNMF） is preferred in nonlinear fibre optics, especially in the applications of optical parametric effects, due to its high optical nonlinear coefficient. However, polarization dependent dispersion will impact the nonlinear optical parametric process in HNMFs. In this paper, modulation instability （MI） method is used to measure the polarization dependent dispersion of a piece of commercial HNMF, including the group velocity dispersion, the dispersion slope, the fourth-order dispersion and group birefringence. It also experimentally demonstrates the impact of the polarization dependent dispersion on the continuous wave supercontinuum （SC） generation. On one axis MI sidebands with symmetric frequency detunings are generated, while on the other axis with larger MI frequency detuning, SC is generated by soliton self-frequency shift.     

A novel 2-μm pulsed fiber laser based on a supercontinuum source and its application to mid-infrared supercontinuum generation

A new method to achieve 2-μm pulsed fiber lasers based on a supercontinuum(SC) is demonstrated. The incident pump light is a pulsed SC which contains a pump light and a signal light at the same time. The initial signal of the seed laser is provided by the incident pump light and amplified in the cavity. Based on this, we obtain a 2-μm pulsed laser with pulse repetition rate of 50 kHz and pulse width of 2 ns from the Tm-doped fiber laser. This 2-μm pulsed laser is amplified by two stages of fiber amplifiers, then the amplified laser is used for mid-infrared(mid-IR) SC generation in a 10-m length of ZrF4–BaF2–LaF3–AlF3–NaF(ZBLAN) fiber. An all-fiber-integrated mid-IR SC with spectrum ranging from 1.8 μm to4.3 μm is achieved. The maximal average output power of the mid-IR SC from the ZBLAN fiber is 1.24 W(average output power beyond 2.5 μm is 340 mW), corresponding to an output efficiency of 6.6% with respect to the 790-nm pump power.     

A New Method for Filter Design Based on Long-Period Fibre Grating

We present a simple method to induce mechanically a long-period fibre grating in a general sing mode fibre.The transmission spectrum of the new type of grating can be tailored by changing the external applied pressure or by introducing a phase-shift in the grating.The tunability this kind of gratings exhibit will be particularly useful for the filter design.     

Realization of Stable Narrow Linewidth Dual-Wavelength Lasing in an Erbium-Doped Fibre Laser by Cleaving the Wavelength-Selective Filter Spectrum

We propose and demonstrate a new concept of stable narrow-line-width and close wavelength spacing dualwavelength lasing in an Er-doped fibre ring laser （EDFRL） by cleaving the spectrum with a wavelength-selective component in the EDFRL. A fibre loop mirror （FLM） combining with a polarization controller （PC） acts as the cleaver. The cleaver can produce a fine pectinate spectrum. By adjusting the PC, the fine pectinate spectrum can be so changeable that cleaving the spectrum of a fibre Bragg grating （FBG） into two parts. As a result, we obtain the dual-wavelength fibre lasering with a bandwidth of only 0.03nm and a wavelength spacing of only 0.07nm. Furthermore, the laser can also perform stable switchable single wavelength or stable different-bandwidth dual-wavelength by carefully adjusting the PC at room temperature.     

Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

Broadband normal dispersion pumping supercontinuum （SC） generation in silica photonic crystal fiber （PCF） is investigated in this paper. A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation. The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region. The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme. The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration, and the pump-to-SC conversion efficiency is up to 90%. In order to avoid the output fiber end face damage and increase the stability of the system, an improved output solution for the high power SC is proposed in our experiment. This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.     

Dispersion flattened photonic crystal fiber with high nonlinearity for supercontinuum generation at 1.55 μm

A robust design for a photonic crystal fiber (PCF) based on pure silica with small normal dispersion and high nonlinear coefficient for its dual concentric core structure is presented.This design is suitable for flat broadband supercontinuum (SC) generation in the 1.55-μm region.The numerical results show that the nonlinear coefficient of the proposed eight-ring PCF is 33.8 W -1 ·km -1 at 1550 nm.Ultraflat dispersion with a value between -1.65 and -0.335 ps/(nm·km) is obtained ranging from 1375 to 1625 nm.The 3-dB bandwidth of the SC is 125 nm (1496–1621 nm),with a fiber length of 80 m and a corresponding input peak power of 43.8 W.The amplitude noise is considered to be related to SC generation.For practical fabrication,the influence of the random imperfections of airhole diameters on dispersion and nonlinearity is discussed to verify the robustness of our design.     

Small-Pitch Kagome Hollow-Core Photonic Crystal Fibre

A hollow-core photonic crystal fibre (HC-PCF) based on small-pitch kagome lattice cladding is designed and fabricated. The pitch of the fibre is only 2.45μm and it corresponds to a region of low normalized frequency which has never been investigated before. Both experiments and calculations show that this kagome HC-PCF has a broad optical transmission band from 400nm to 900nm, covering the whole visible and near infrared region of the spectrum. Additionally, the loss curve of the fibre is flat in the visible region and the minimum of the loss achieves 0.16dB/m, which is lower than the loss of the kagome HC-PCFs reported before. Furthermore, this fibre can well confine the modes in the air core. No surface modes can be detected in the surrounding silica of the hollow core.     

Improving performance of optical fibre chaotic communication by dispersion compensation techniques

This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication system. The obtained results show that the transmitter-receiver synchronization progressively degrades and the signal-to-noise ratio of the recovered message deteriorates as the fibre length increases due to the dispersion accumulation. Two segments of 2.5-km dispersion-compensating fibres are symmetrically placed at both ends of a segment of 245-km nonzero dispersionshifted fibre with low dispersion in one compensation period. The numerical results show that the signal-to-noise ratio of the extracted 1 GHz sinusoidal message is improved from -2.92 dB to 15.38 dB by this dispersion compensation for the transmission distance of 500 km.     

Suppression of the interactions between fibre gratings used as dispersion compensators in dense wavelength-division multiplexing systems

Chirped fibre Bragg gratings (CFBGs) are required to be concatenated to compensate the fibre dispersion in the dense wavelength-division multiplexing (DWDM) systems. When the channel spacing is small, the performance of CFBGs is degraded, which restricts the usage of fibre gratings. The origin of the interactions between the gratings is analysed and methods of suppressing the interactions are also proposed.