离子色谱法分析金属离子的研究进展

综述了离子色谱法(IC)分析金属离子的研究进展,对目前应用于分析金属离子的阳离子交换IC、阴离子交换IC和螯合离子色谱进行了评述。阳离子交换IC是IC分析金属离子的主要形式,固定相为强酸(磺酸)型阳离子交换剂和弱酸(羧酸)型阳离子交换剂,结合适当的检测方法,阳离子交换IC可以测定碱金属、碱土金属、过渡金属、稀土离子、铵离子及低相对分子质量的有机胺类分子等。阴离子交换IC可以分析碱土金属、过渡金属、稀土离子等,对金属离子的分析具有更好的选择性,并可以实现金属离子和无机阴离子的同时测定。螯合离子色谱可以对复杂基体中的痕量金属离子进行测定。引用文献125篇。     

络合物离子色谱在微量金属分析中的新发展

评述了络合物ＩＣ（包括阳离子交换ＩＣ、配位ＩＣ、阴离子交换ＩＣ和离子对色谱）在微量金属分析中的新发展，以配位化学基本理论对金属络合物ＩＣ的保留行为和分离机理进行讨论，并对各种金属络合物ＩＣ技术和应用进行比较和对照。     

高效液相色谱法同时测定钼和钒的4-(2-吡啶偶氮)间苯二酚螯合物

用高效液相色谱分离和检测无机离子的方法已深受注意。反相离子对高效液相色谱法对金属螯合物的分离和测定更加有效。倘若能使用某些络合剂,于柱前或柱上将某些干扰离子隐蔽,可以提高此种方法的选择性。     

牡蛎源类蛋白反应修饰肽的分离纯化及肽锌螯合物的结构表征

以牡蛎为原料制备了类蛋白反应修饰肽,利用Sephadex G-15凝胶层析柱和反向高效液相色谱(RP-HPLC)等分离技术得到1条锌离子螯合活性为161 mg/g的多肽(M_w=835),多肽序列为EVPPEEH.以测得的肽序列为模板合成多肽,将纯肽与锌离子进行螯合反应制备肽锌螯合物.螯合物的红外光谱和圆二色光谱表征结果表明,锌离子主要与多肽链上的羰基氧发生相互作用.与多肽的空间结构相比,螯合物的无规则卷曲结构减少,β转角增加而β折叠减少.由肽锌螯合物的分子模拟和二级质谱结果可知,多肽与锌离子螯合后有2种空间构象:一种通过六配位的方式螯合1个锌离子,其中主要的螯合位点为多肽Val-2和Pro-3或者Glu-5和Glu-6之间的羰基氧;另一种是通过四配位的方式螯合1个锌离子,主要的螯合位点为多肽Glu-5和Glu-6之间的羰基氧.     

聚丙烯酰胺型配体交换色谱载体的合成及分离氨基酸

合成了以亲水性聚丙烯酰胺为骨架的含有可与铜离子形成五元环螯合物配位基团的螯合树脂,这些树脂的Cu~(2+)络合物作为配体交换色谱载体对中性氨基酸进行了分离,并与2种已知螯合树脂的Cu~(2+)络合物作为载体的色谱行为作了比较。本文合成的树脂具有最好的分高性能,研究了色谱条件对分离的影响,讨论了色谱分离机制。     

IDA型Cu~(2 )-螯合亲和膜色谱法对牛肝过氧化氢酶纯化的研究(英文)

首次采用以改性纤维素为基质、亚氨二乙酸（ＩＤＡ）为取代配基的铜离子螯合膜色谱法对牛肝过氧化氢酶（ＢＬＣ）的分离纯化进行了研究。缓冲液的ｐＨ值对ＢＬＣ与螯合配基的结合影响显著。在选定的色谱条件下，ＢＬＣ粗酶液经ＩＤＡ型Ｃｕ２＋－螯合膜色谱柱一步纯化，比活性平均提高４．７倍，回收率为６７．７％。金属螯合膜色谱柱可用含０．２ｍｏｌ／Ｌ的咪唑或５０ｍｍｏｌ／ＬＥＤＴＡ－１ｍｏｌ／ＬＮａＣｌ的缓冲液再生，反复使用，后者比前者对柱子的再生效果更好。     

蛋白质在合成阳离子交换剂上的色谱特性研究

用国产材料按间接法合成了螯合型弱阳离子交换剂,详细研究了合成填料的色谱性能,并与商品柱的分离效能进行了比较;在宽温度范围内研究了蛋白质在弱阳离子交换系统中的色谱热力学,测定了蛋白质在色谱过程变性时的热力学参数 (△H0和△S0) 和补偿温度β,提出用标准熵变△S0判断蛋白质的构象变化和用△H0与△S0的补偿关系鉴定蛋白质各变体在色谱系统保留机理的同一性。考察了螯合型弱阳离子交换剂与金属离子的作用,研究了蛋白质在金属螯合色谱中的保留机理。     

三聚磷酸钠与柠檬酸钠钙螯合机理和螯合能力的对比分析

选取了常用洗涤助剂三聚磷酸钠(STPP)与柠檬酸钠(NaCA)为研究体系,通过实验测定和理论分析,对洗涤助剂的钙螯合能力进行了研究.实验研究采用铬黑T指示剂络合滴定法,分别测定以上2种助剂的钙螯合能力,结果表明:2种助剂均可与Ca2+离子形成稳定的螯合物,但螯合Ca2+离子的能力不同,三聚磷酸钠螯合能力较强.理论计算运用Gaussian09程序包,采用密度泛函的B3LYP方法,6-31G(d,p)基组,在溶剂化条件下计算出2种洗涤助剂与Ca2+离子形成螯合物的几何结构及其结合能,三聚磷酸钠和柠檬酸钠与Ca2+离子的螯合物均为六配位八面体结构,磷酸基团或羧酸基团与羟基参与配位.实验所得螯合能力的差异可以由理论计算得到的分子结构、结合能及前线分子轨道方面进行解释.     

稀土—5—Br—PADAP螯合物的高效液相色谱分离与测定

以配合物形式分离金属离子已有报道.胡之德等研究了In、Pt、Pd等金属与5-Br-PADAP螯合物的色谱行为,在硅胶柱上成功地分离了这几种金属元素.林长山等应用反相高效液相色谱法,分离了Fe(Ⅲ)、Co(Ⅱ)和V(Ⅱ)3种金属的5-Br-PADAP螯合物,并做了定量的研究.本文应用高效液相色谱法研究了镧系-5-Br-PADAP螯合物色谱行为,探讨了相关因素对分离和测定的影响,讨论了螯合物的保留值与稀土元素原子半径的关系.     

IDA型Cu~(2+):-螯合亲和膜色谱法对牛肝过氧化氢酶纯化的研究(英文):

首次采用以改性纤维素为基质、亚氨二乙酸（ＩＤＡ）为取代配基的铜离子螯合膜色谱法对牛肝过氧化氢酶（ＢＬＣ）的分离纯化进行了研究。缓冲液的ｐＨ值对ＢＬＣ与螯合配基的结合影响显著。在选定的色谱条件下,ＢＬＣ粗酶液经ＩＤＡ型Ｃｕ２＋－螯合膜色谱柱一步纯化,比活性平均提高４．７倍,回收率为６７．７％。金属螯合膜色谱柱可用含０．２ｍｏｌ／Ｌ的咪唑或５０ｍｍｏｌ／ＬＥＤＴＡ－１ｍｏｌ／ＬＮａＣｌ的缓冲液再生,反复使用,后者比前者对柱子的再生效果更好。     

Complexation ion chromatography —an overview of developments and trends in trace metal analysis

Complexation ion chromatography (IC), including all ion chromatographic modes in which complexation is exploited for the separation and detection of metal ions in different ways, is now a widely accepted method of trace metal analysis. Some of the significant advances in the theoretical aspects and practical applications of complexation IC modifications (non-suppressed cation chromatography with complex- forming mobile phases, coordination chromatography with chelate-forming bonded phases, ion-exchange and ion-pair chromatography of anionic metal chelates) recently developed in the authors' laboratories are reviewed. The retention behaviour and separation mechanism of non-complexed and completed metal analytes are discussed from the point of view of basic coordination chemistry (stability of metal complexes, effective charge of metal atom, ligand completing ability, etc.). Comparisons and contrasts between various metal complexation IC techniques and their common features and advantages relative to other methods used in analyses for transition and heavy metal ions are evaluated.     

Ion chromatographic determination of transition metals in irradiated nuclear reactor surveillance samples

The determination of transition metal ions in radioactive (+/-25 microCi/g) low-alloy steels (nuclear reactor surveillance samples) by ion chromatography (IC) is described. The analysis has been done directly without prior separation of the iron matrix. The eluted metal ions have been detected with a UV-visible spectrophotometric detector after post-column complexation with 4-(2-pyridylazo)resorcinol. The results are in a good agreement with the certified values for the standard reference material used. The method was applied to nuclear reactor surveillance samples for the determination of Cu, Mn, Co and Ni.     

Separation of metal ions and metal-containing species by micellar electrokinetic capillary chromatography, including utilisation of metal ions in separations of other species

The use of micellar electrokinetic capillary chromatography (MEKC) for the separation of metal ions and metal-containing species is reviewed, together with the use of metal ions as a means to separate other species. Topics covered include the manipulation of separation selectivity through the use of complexation reactions induced by addition of a metal ion to the background electrolyte, enantiomeric separations facilitated through metal-analyte interactions, separation of organometallic species, separation of stable metal complexes in which the entire complex is the analyte and the separation of metal ions as analytes using pre-capillary or on-capillary complexation reactions with a suitable ligand.     

Ion chromatographic determination of transition metals in irradiated nuclear reactor surveillance samples

The determination of transition metal ions in radioactive (±25 Ci/g) low-alloy steels (nuclear reactor surveillance samples) by ion chromatography (IC) is described. The analysis has been done directly without prior separation of the iron matrix. The eluted metal ions have been detected with a UV-visible spectrophotometric detector after post-column complexation with 4-(2-pyridylazo)resorcinol. The results are in a good agreement with the certified values for the standard reference material used. The method was applied to nuclear reactor surveillance samples for the determination of Cu, Mn, Co and Ni.     

锆胶基质阳离子色谱柱填料的制备

以10μm锆胶微球包覆聚苯乙烯制成强酸、弱酸型的阳离子色谱柱填料,具有良好的色谱性能。使用D ionex-120型双柱离子色谱仪,较好地分离碱金属、碱土金属离子及铵离子,比较了不同交换基团对溶质保留的影响。由于锆胶基质具有高的化学稳定性和机械强度,用作离子色谱柱填料有良好的应用前景。     

Metal ion complexation by acyclic polyethers with lipophilic amide, thioamide, and amine end groups

A series of acyclic polyethers with lipophilic amide, thioamide, and amine end groups was synthesized. Metal ion transport across bulk liquid membranes and measurement of thermodynamic parameters for ligand-metal ion complexation by titration calorimetry show strong selectivity for complexation of lead ion over other metal ion species for the diamide ligand. Lead ion complexation by the acyclic polyether diamide involves the amide oxygens and silver ion coordination by a dithioamide analog involves the thioamide sulfurs. With a proper length of the ethereal linkage, the ligand wraps around the metal ion in a pseudocyclic fashion.     

Separation selectivity of anionic metal complexes of N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid in ion and ion electrokinetic chromatography

The complexes of Fe(III), Co(III), Mn(III), Al(III), Cu(II), Ni(II), Cd(II) and Zn(II) with N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid (HBED) were separated by ion exchange in different modes: ion chromatography (IC) and ion electrokinetic chromatography (IEKC). In column IC these complexes were separated on an IonPac AS4a anion-exchange column (Dionex, USA). Parameters of the background electrolyte that were examined in IEKC mode include polymer, competing ion concentration and pH. The use of poly(diallyldimethylammonium chloride) (PDADMACl) as a modifier in IEKC provides separation selectivity only slightly different from that observed in IC on the IonPac AS4a column. Optimal separation conditions were found to be: 0.1 mM HBED, 50 mM PDADMAOH, 10 mM Na2 B4 O7, pH adjusted to 10 with acetic acid. The use of an aromatic ligand allowed a 10-fold decrease in detection limits of metal ions in comparison with previously studied EDTA. A separation efficiency up to 400,000 theoretical plates was demonstrated for IEKC.     

Acetohydroxamate Resin as Column Packing for Ion Chromatography

A chelating resin with acetohydroxamate functional groups was synthesized and used as the stationary phase in ion chromatography for the determination of copper. As the reaction mechanism was mainly complexation, the coordination behavior of the synthesized resin toward Cu(II) was studied by means of EPR, IR and electronic spectrometry and potentiometry. The kinetic study shows that the resin is suitable for use in ion chromatography. We employed a resin column 250 mm long by 3 mm I.D. in conjunction with a mixture of hydrochloric acid and acetone as mobile phase for the determination of Cu(II). Detection of the chromatography system was carried out via post-column derivatisation of the column effluent with PAR at 520nm. The detection limit is 0.22ppm, and the relationship was linear in the range 0.25-1.20ppm. We investigated the effect of other metal ions, As(V), Cd(II), Cr(III), Hg(II), Ni(II), Pb(II) and Zn(II), or foreign ligands, EDTA, ascorbic acid, humic acid or sodium chloride on the determination of Cu(II) ion. A concentration column packed with acetohydroxamate resin combined with the above separation system was also used to determine of copper ion; the dynamic range is 2-15 ppb and the detection limit is 0.70ppb. The proposed system was applied to the analysis of Cu(II) in sea water.     

High-Performance Chelation Chromatography of Metal Ions on Sorbents with Grafted Iminodiacetic Acid

The chromatographic behavior of some alkaline-earth, transition, heavy, and rare-earth metals on a number of complexing sorbents containing surface iminodiacetic acid (IDA) functional groups is studied. The conditions under which metal retention is determined by complexation on the sorbent surface were established, and the main principles of a new variant of the liquid chromatography, i.e., high-performance chelation ion chromatography (HPCIC), are formulated. The efficiency and selectivity of separation of the metal ions are considered depending on the type of the IDA bonding, the sorbent matrix parameters, the eluent composition, and the temeprature of the chromatographic column. Under optimal conditions, the metal retention is shown to linearly correlate with the stability constants of the respective complexes in the double-logarithmic scale. The application of HPCIC to the analysis of multicomponent systems is considered.