Binding of acrylic and sulphonic polyanions by open-chain polyammonium cations

The interactions between some acrylic and sulphonic polyanions and some protonated amines (diamines NH₂-(CH₂)_x-NH₂, x=2,…,10; linear tri-, tetra-, penta- and hexa-amines) were studied potentiometrically in aqueous solution, at 25°C. For both types of polyanions AL₂H_i (L⁻, monomer of polyanion, A, amine) species are formed, with i=1,…,n (n=number of amino groups in the amine). The stability of these species is strictly dependent on the polyammonium cation charge, and fairly independent of the type of amine (in diamine species maximum stability is observed for x=4, 5). Acrylic and sulphonic polyanion complexes are considerably stronger than analogous species formed by low molecular weight anions. Mean stability can be expressed as log K=2.87ζ^2/3, for polyacrylic anions and log K=2.42ζ^2/3 for polysulphonic anions (ζ=absolute value for charge product of reactants).     

The extraction equilibria of the ion associate of periodate with 1-(3,5-diamino-6-chloropyrazinecarboxyl) guanidine

The extraction equilibrium of the ion-associate of periodate with 1-(3,5-diamino-6-chloropyrazinecarboxyl) guanidine hydrochloride (DPG⁺Cl⁻) was investigated spectrophotometrically. The optimum conditions for the extraction of the ion associate DPG⁺·IO₄⁻ with cyclohexanone have been established. The ion association constants, β, K_D and K_ex and the molar absorpativity of the formed ion associate were determined. These values enable a convenient application of the investigated system for the extraction spectrophotometric determination of periodate ions in the aqueous media. The molar ratio of the ion associate was found to be 1:1 of periodate to the reagent DPG⁺Cl⁻ at pH 4–5.     

Determination of stability constants for rare earth elements and fulvic acids extracted from different soils

Fulvic acids (FAs) were extracted by alkali extraction from different soil samples in China, then purified using resins and characterized by Fourier transform infrared spectroscopy. The complexing ability of FAs was investigated by measuring the stability constants of rare earth elements (REEs) (La³⁺, Ce³⁺, Sm³⁺, Gd³⁺, Y³⁺) with FAs by the ion exchange technique. The results indicated that maximum binding ability forY³⁺ (4.414.44) was higher than other REEs (La³⁺, Ce³⁺, Sm³⁺, Gd³⁺) (0.721.03). There were two types of binding sites in the functional groups of fulvic acids. The complexing reaction followed two steps. The stability constants (K₁ and K₂) of REEs with FAs were calculated from experimental data by division of Scatchard plots into two straight-line segments. Y³⁺ (log K₁=5.72±0.05, log K₂=4.83±0.01) also has higher stability constants than the other four REEs (log K₁=4.37±0.16, log K₂=3.62±0.28).     

宏观均相多孔电极电化学阻抗谱基础

电化学阻抗谱可用于诊断多孔电极内电荷转移反应,即界面电荷集聚和电荷传导,以及反应物质输运。本文采用复相量方法,在同态假设条件下,重新推演多孔电极阻抗谱模型,厘清传统多孔电极阻抗谱模型中的模糊性表述。(1) 定义多孔电极表征输入参数,包括电极基体电子电导率σ₁ 、电解质离子电导率σ₂、界面电荷传递电导率g_ct、单位面积界面电容C、固相扩散系数D、速度常数k、电极厚度d、特征孔深L_p 和单位体积表面积S_c;(2) 解析阻抗谱特征输出参数,包括场扩散常数K,特征频率ω₀、ω₁、ω₂、ω₃和 ω_max,它们分别相关于界面传导反应、有限场扩散、氧化还原反应、孔内扩散和最小特征孔尺寸,以及分别对应于从传导到扩散和从扩散到饱和的转折频率f_k1 和f_k2;(3) 当参数X和Z同时变化时(X = σ₁和Z = d,S_c,L_p,C,g_ct,D,k),通过阻抗谱特征参数的演变规律,分析了电荷转移反应中X和Ζ参数耦合竞争;(4)为深入分析电荷转移反应中参数X和Z的耦合竞争,引入了分叉频率f_XZ和f_ZX 。f_XZ和f_ZX所处位置可以用于表征参数X和Z影响电荷转移反应的深度和广度。当分叉频率f_XZ和f_ZX不存在时,表明电荷转移反应中参数X和Z在全频率范围内存在耦合竞争。总之,借助于特征频率和分叉频率,本文一方面研究了动力学参数和微观结构参数对多孔电极中电荷转移反应的影响,另一方面分析谱图的变化及其背后的阻抗谱特征演化规律。本文研究结果可为阻抗谱的系统仿真和辨识提供理论基础,可为多孔电极内电荷转移反应的竞争分析提供技术支撑,还可为电化学储能系统的优化设计提供诊断工具。     

Investigation on the viscoelasticity of synchronous hepatocellular carcinoma cells

Having made use of the micropipette aspiration technique, we here investigated the viscoelastic properties of hepatocellular carcinoma (HTC) cells from the view of cell cycle. The synchronous G₁ and S phase cells were achieved through thymine-2-desoryriboside and colchicine sequential blockage method and double thymine-2-desoryriboside blockage method, respectively. The synchronization results detected with flow cytometer showed that it could meet the requirements of the experiments nicely. Experimental results were analyzed with a standard linear solid viscoelastic model, in which an elastic element, K₁, is in parallel with a Maxwell element composed of another elastic element, K₂, in series with a viscous element, μ. The results indicated that high K₁, K₂ values and low μ value was the general characteristics of the cells; G₁ phase cells had higher K₁ values and low μ value than S phase cells, which endowed G₁ phase cells with higher elasticity and faster passive deformability than S phase cells. The results maybe also reflected the difference of cytoskeleton between G₁ and S phase cells, and suggested that G₁ phase cells were more suitable for surviving and metastasis in blood circulation than S phase cells.     

Kinetic analysis of thermogravimetric data obtained under linear temperature programming—a method based on calculations of the temperature integral by interpolation

A new technique, called interpolation method, with general application in the kinetic analysis of processes studied by thermogravimetry (TG) under linear temperature programming is developed. It is based on the linear relationship, with slope 1, between log g() and log I(γ, θ) for the appropriate kinetic function, where I(γ, θ) is the normalized temperature integral, θ the normalized temperature (θ=T/T₀) and γ a dimensionless activation energy (γ=E/RT₀). Values of log I(γ, θ) are calculated by linear interpolations in a pre-built table. This method can easily be programmed and implemented in a personal computer, where the results (kinetic parameters and quality of regressions for the kinetic functions considered) are typically obtained in a very short time. The method is validated by analyzing different simulated thermogravimetric curves and comparing the results with those determined with some classic methods taken from the literature. In addition, the results are compared with the values obtained by a similar method, also developed and explained in this paper, which involves the evaluation of all the values of the temperature integral by numerical integration, therefore, demanding a much larger calculation time. The interpolation method is found to be more accurate than other published methods, particularly in the case of thermogravimetric curves corresponding to processes with low activation energies. The results obtained are always similar to those determined by the integration method, which is taken as reference. Application of the technique to experimental data for various types of reactions shows that the results are in agreement with the published parameters and kinetic laws.     

Theoretical study of the elimination kinetics of several 2-substituted ethyl N,N-dimethylcarbamates in the gas phase, [(CH3)2NCOOCH2CH2Z, Z=CH2Cl, C≡CH, C≡N]

The theoretical studies of the gas-phase elimination of 2-substituted ethyl N,N-dimethylcarbamates (Z=CH₂Cl, C≡CH, C≡N) were performed using ab initio MP2/6-31G and MP2/6-31G(d) levels of theory. The gas phase elimination reaction of these carbamates yields N,N-dimethylcarbamic acid and the corresponding substituted olefin in a rate-determining step. The intermediate N,N-dimethylcarbamic acid is unstable and rapidly decomposes through a four-membered cyclic transition state to dimethylamine and CO₂ gas. The results of these calculations suggest a mechanism to be concerted, asynchronous, and a six-membered cyclic transition state structure. Plotting the relative theoretical rate coefficients against Taft's σ* values gave an approximate straight line (ρ*=0.4057, r=0.9894 at 360 °C). The correlation between experimental log k_rel vs. theoretical log k_rel. for these 2-substituted ethyl N,N-dimethylcarbamates gave an approximate straight line (r=0.9715 at 360 °C), suggesting the same type of mechanism.     

Some further considerations on deriving matrix elements of non-periodic potentials in the basis of the non-degenerate harmonic oscillator wavefunctions

Using the properties of the generating function of the Hermite polynomials, we have calculated the matrix elements for the Gaussian-type potential V_G(x)=A exp{−B(x−C)²} and for the Morse-type potential V_M(x)=D_e[1−exp(−ax)]² in the basis of the non-degenerate harmonic oscillator wavefunctions. The final forms of these matrix elements are very simple to use and hence suitable for the numerical resolution of the Schrödinger equation for multiple-well potentials or anharmonic oscillators.     

The adsorption, CMC determination and corrosion inhibition of some N-alkyl quaternary ammonium salts on carbon steel surface in 2 M H2SO4

Electrochemical measurements were performed to investigate the effectiveness of cationic surfactants of the N-alkyl quaternary ammonium salt type, i.e. myristyltrimethylammonium chloride (MTACl), cetyldimethylbenzylammonium chloride (CDBACl), and trioctylmethylammonium chloride (TOMACl), as corrosion inhibitors for type X4Cr13 ferritic stainless steel in 2 M H₂SO₄ solution. Potentiodynamic polarization measurements showed that these surfactants hinder both anodic and cathodic processes, i.e. act as mixed-type inhibitors. It was found that the adsorption of the N-alkyl ammonium ion in 2 M H₂SO₄ solution follows the Langmuir adsorption isotherm. Plots of log [θ/(1 − θ)] versus log c_inh yielded straight lines with a slope, which changed drastically at the critical micelle concentration (CMC) of the surfactants studied. Accordingly, the CMC could be accurately determined from these measurements. The calculated values of the free energy of adsorption ΔG_ads are, in cases when the charge on the metal surface is negative with respect to the PZC, relatively high what is characteristically for the chemisorption. On the other hand, for positive metal surfaces it is assumed that SO₄²⁻ anions are adsorbed first, so the cationic species would be limited by the surface concentration of anions. Accordingly ΔG_ads values were lower in this case and the adsorption is due to merely electrostatic attraction, which is characteristically of physisorption.     

Dynamics of 4,4'-di-n-heptylazoxybenzene (HAB) studied using dielectric and 2H NMR relaxation measurements

Results of studies of 4,4'-di-n-heptylazoxybenzene (HAB) in the isotropic, nematic and smectic A phases are presented. Two experimental methods were employed: broad band dielectric spectroscopy and nuclear magnetic resonance spectroscopy. The complex dielectric permittivity, ε*(ω)=ε'(ω)-iε'(ω), was measured in the frequency range 1 kHz-4 GHz. This allowed two main relaxation processes to be separated in all the phases studied: the low frequency (l. f.) process connected with molecular reorientations around the short axes, and the high frequency (h. f.) process connected with the rotations around the long axes. The corresponding relaxation times and activation enthalpies were obtained. The l. f. relaxation time changes step-wise at the phase transitions, whereas the h. f. relaxation time passes smoothly through all the phases. The measurement of ²H spin-lattice relaxation times was carried out throughout the mesophase range at 61.38 MHz. These data were analysed together with the relaxation times measured at 10.00 and 46.04 MHz, available from previous studies. Using suitable theoretical models the principal components of the diffusional tensor, D_‖ and D_⊥, as well as the diffusion coefficients D_R relative to the internal rotation of the phenyl rings, were determined. The results of both studies are compared and discussed.     

Determination of sunscreen agents in cosmetic products by supercritical fluid extraction and high-performance liquid chromatography

A rapid supercritical fluid extraction (SFE) procedure for the isolation of five of the most common sunscreen agents (2-ethylhexyl-p-dimethylaminobenzoate, 2-hydroxy-4-methoxybenzophenone, 2-ethylhexyl-p-methoxycinnamate, 4-methylbenzylidene camphor and 4-tert.-butyl-4′-methoxydibenzoylmethane) from cosmetic products is described. Investigation of the factors affecting the extraction efficiency in SFE indicated that sunscreen recoveries were affected mainly by the supercritical CO₂ pressure and by the trapping method. The sunscreens were analyzed by reversed-phase high-performance liquid chromatography after a 10-min extraction of the cosmetic product with CO₂ at 250 bar and 40°C, using sequential glass surface and C₁₈ sorbent as collection system. A quantitative comparison of SFE with a liquid extraction procedure was performed on commercial cosmetics. The SFE method yielded recoveries higher than 94.8% compared with conventional liquid extraction and exhibited a precision better than 5.3% relative standard deviation. Moreover, SFE minimized sample handling, reduced the consumption of harmful solvents and afforded a more effective purification of the cosmetic matrices.     

A triple helical calcium-based coordination polymer with strong blue fluorescent emission

A hydrothermal reaction of 1,3-dicyanobenzene and Ca(OH)₂ yielded a triple helical calcium-based coordination polymer of the formula, C₂₀H₂₅Ca_2.50O_18.50 (1). The 1,3-benzenecarboxylate anion, found in the final product was generated in situ during the synthesis by the hydrolysis of 1,3-dicyanobenzene. X-ray diffraction study shows that the complex 1 crystallizes in the monoclinic system, C2/c space group, a=15.5701(5), b=21.4445(7), c=17.1601(6) Å, β=111.7400(7)°, V=5322.1(3) Å³, Z=8, D_c=1.651 Mg/m³. The calcium atoms show differences in the coordination environments. Complex 1 emits strong blue fluorescent light (λ_em(max)=419 nm) when it is excited by UV light (λ_ex(max)=316 nm) in the solid state at room temperature.     

自由基照像光显影研究——能量转移机理及动力学

研究了重原子化合物及各种气氛对四溴化碳-无色结晶紫自由基片光显影速度的影响。当片子中有重原子化合物碘仿,对碘苯胺或三苯基铋,或者片子置于氮气中光显影时,显影速度明显增加;在氧气中显影速度大大下降。氮气中的显影速度常数K₀。与氯氧混合气体中显影度常数K满足如下关系: K₀/K=1+a[O₂]式中a为淬灭常数。因此,证明是三线态-三线态传能。 实验证明,在光显影主期中,满足D=D₀+Kt动力学关系。式中D为光密度,D₀为光密度常数,K为光显影速度常数,t为显影时间。     

Kinetic modelling of cadmium removal from phosphoric acid by non-dispersive solvent extraction

In this work it is reported that the kinetic modelling of the separation of cadmium from phosphoric acid by non-dispersive solvent extraction. Using Cyanex 302 as selective extractant, the extraction step was carried out in a hollow fibre module containing polypropylene fibres, whereas the concentration step required a ceramic module with tubular channels due to the high acidity of the backextraction agent. Application of the methodology previously reported by the authors led to the development of a kinetic model with three design parameters, i.e., equilibrium constant of the extraction reaction (K'_e = 6 × 10³ mol⁻²/l⁻²), membrane mass transport coefficient of the extraction module K_me=8.33×10⁻⁸ m/s) and of the backextraction module (K_ms=3.33×10⁻⁸ m/s), that described satisfactorily the behaviour of the separation-concentration system. Thus, in this work a new application of the non-dispersive solvent extraction technology is presented, characterising at the same time the behaviour and parameters of a new type of contactor, i.e., a tubular ceramic module.     

基于一维双螺旋链的锌配合物的合成与荧光性能

选择配体N,N'-双(3-吡啶)丙二酰胺(3-bpma)、1,4-对苯二乙酸(H₂pda)和硝酸锌在水热条件下,自组装制备了一个基于双螺旋链的三维超分子锌配合物[Zn(3-bpma)(pda)]_n(1),并通过红外光谱、元素分析、热重分析和X射线单晶衍射分析进行了晶体结构表征。 单晶结构分析表明标题锌配合物是正交晶系,Pna21空间群,晶胞参数a=1.62512(11) nm,b=1.15947(8) nm,c=1.19282(8) nm,α=90°,β=90°,γ=90°,V=2.2476(3) nm³,M_r=513.80,D_c=1.518 g/cm³,Z=4,F(000)=1056,R₁=0.0381,wR₂=0.0669。 金属锌离子被两种桥连配体3-bpma和pda连接形成一种一维双螺旋链状结构,相邻的链间进一步通过氢键作用拓展成为三维超分子网络结构。 标题锌配合物具有强荧光发射特性,而且其对不同的有机溶剂分子和金属离子有显著的荧光传感特性,可以作为检测硝基苯的高灵敏性荧光传感材料。 CCDC:1811967     

Predicted radiolysis yield in a Fricke solution irradiated with various heavy ions

Experimental data on the spatial distribution of the energy deposited around an energetic heavy ion, from 1 MeV proton to 5.9 MeV/n uranium ion, which have been reported in the literature were documented to obtain a scaled radial dose distribution; (β/Z*)² D(Z*, β,t)=200 (for t=0–1), 200/t² (for t=1t_c), and 200 t_c/t³ (for t>t_c) where Z* and β are the effective charge and velocity relative to c, the velocity of light, of the incident ion, respectively, D the dose in unit of Gy, t the radial distance in unit of nm, t_c the critical distance empirically determined.

Then, if we know the yield of any chemical reaction as a function of dose from the results of experiments using γ-radiations or fast electrons or theoretical calculations, we can calculate the probability for the yield of the chemical reaction in the system bombarded with a heavy ion of the effective charge Z* and velocity β. The results of the present calculation of the LET-values and of G(Fe³⁺) in the ferrous sulfate acidic solution are presented and compared with reported experimental results.     

Spectral characterization of a novel near-infrared cyanine dye: a study of its complexation with metal ions

The spectral features of the near-infrared (NIR) dye TG-170 in different solutions and its complexation with several metal ions were investigated. The absorbance maxima of the dye are at λ=819, 805, and 791 nm in dimethyl sulfoxide (DMSO), methanol, and a buffer of pH 5.9, respectively. These values match the output of a commercially available laser diode (780 nm), thus making use of such a source practical for excitation. The emission wavelengths of the dye are at λ_em =822, 812, and 803 nm in DMSO, methanol, and the buffer, respectively. The molar absorptivity and fluorescence quantum yield increase accordingly. The addition of either an Al(III) ion or Be(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=3.11×10⁵ M⁻¹ for the Al(III) ion and K_SV=1.17×10⁶ M⁻¹ for the Be(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 4.37×10⁴ M⁻¹ for the Al–dye complex and 1.94×10⁶ M⁻¹ for the Be–dye complex.     

Extraction and DFT study on the complexation of H3O with hexaethyl p-tert-butylcalix[6]arene hexaacetate

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium H₃O⁺(aq) + 1· Na⁺(nb)  1·H₃O⁺(nb) + Na⁺(aq) taking place in the two-phase water–nitrobenzene system (1 = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K_ex (H₃O⁺, 1·Na⁺) = −0.6 ± 0.1. Further, the stability constant of the 1·H₃O⁺ complex in water saturated nitrobenzene was calculated for a temperature of 25 °C as log β_nb (1·H₃O⁺) = 6.8 ± 0. 2. By using quantum mechanical DFT calculations, the most probable structure of the 1·H₃O⁺ complex species was predicted. In this complex, the hydroxonium ion H₃O⁺ is bound partly to three carbonyl oxygen atoms by strong hydrogen bonds and partly to three alternate phenoxy oxygens by somewhat weaker hydrogen bonds.     

三环已基锡L-扁桃酸酯配合物的合成、结构及性质

三环己基氢氧化锡与L-扁桃酸(物质的量比1:1)在苯和乙醇混合溶剂中反应合成了三环己基锡L-扁桃酸酯。 经X射线衍射方法测定了其晶体结构,配合物属斜方晶系,空间群为P2₁2₁2₁,晶体学参数a=0.80825(4) nm,b=1.77151(8) nm,c=1.8385(2) nm,α=β=γ=90°,V=2.6324(2) nm³,Z=4,D_c=1.310 g/nm³,μ(MoKα)=9.92 cm^-1,F(000)=1080,R₁=0.0472,wR₂=0.1341。 中心锡原子与环己基碳原子和氧原子构成畸型四面体。 对其结构进行量子化学从头计算,探讨了配合物的稳定性、分子轨道能量以及一些前沿分子轨道的组成特征。 研究了配合物的热稳定性、电化学性能、圆二色谱和体外抗癌活性。