活性碳纤维固相微萃取/气相-质谱联用测定水中苯系物

 对直接进样、二硫化碳萃取和活性碳纤维固相微萃取 (ACF SPME)分别与气相 质谱联用测定水中的苯系物的方法进行了比较研究。对 3种方法的线性、重复性、最小检出限等进行了试验测定。测定结果表明 ,固相微萃取在灵敏度方面优于其他方法 ,但在重复性方面还有待提高。利用固相微萃取方法进行了实际废水样的检测及回收率试验 ,结果令人较为满意。     

固相微萃取-气相色谱法测定涂料中苯系物

采用固相微萃取(SPME)技术结合气相色谱法对涂料中的苯系物进行检测和分析,针对涂料中存在的主要污染物,对影响SPME的参数进行了优化.建立的方法在所测的范围内具有良好的线性(相关系数:0.9991～0.9996);检出限达0.05～0.60 μg/L;重复测定的相对标准偏差小于2.3%.     

固相微萃取-气相色谱/质谱联用分析室内空气中的苯系物

自制了一种固相微萃取采样装置,建立了固相微萃取-气相色谱/质谱(SPME-GC/MS)联用测定室内空气中苯系物的分析方法。方法的线性范围为1~300μg/m3,检出限为0.1~0.3μg/m3,RSD(n=6)3.2%~15%。采用该方法研究了广州市内20户新装修民居中苯、甲苯、乙苯、对二甲苯和1,3,5-三甲苯的含量及分布,并探讨了苯系物的来源。     

聚丙烯酸树脂涂层HS-SPME-GC-MS监测城市污水中的芳香烃化合物

采用聚丙烯酸树脂涂层-固相微萃取-气相色谱-质谱(PA—SPME—GC—MS)联用技术,在优化的萃取条件下检测了城市污水中的苯系物和多环芳烃等芳香烃化合物．该方法的最低检出限达12ng／L水平,相对标准偏差为1．7％～9．8％．     

苯系物的色谱分析方法的研究进展

对近几年来苯系物的色谱分析方法的研究进展进行了综述,着重介绍了气相色谱内标法以及顶空、固相微萃取、液液微萃取等前处理方法,并对苯系物的分析发展方向和控制进行了展望(引用文献49篇)。     

有序介孔碳涂层纤维固相微萃取用于环境水样中苯系物的测定

本文采用直接粘合法制备了有序介孔碳涂层萃取纤维,并将其应用于水中苯、甲苯、乙苯、邻二甲苯4种苯系物的固相微萃取。结果表明,所合成的介孔碳粉末孔径分布集中,比表面积和孔容分别为701.4m~2/g和0.353cm~3/g,制备得到的涂层完整、连续,与基体结合紧密。采用顶空-固相微萃取与气相色谱-质谱联用技术对水样中的苯系物进行分析测定,结果表明:该萃取纤维具有良好的热稳定性和溶剂稳定性;在最佳萃取及检测条件下,方法线性范围为1~1 000μg/L,相关系数良好;检出限在0.086~0.088μg/L之间;同一涂层的相对标准偏差(RSD,n=5)为2.0%~5.5%;萃取效率远远高于商用聚二甲基硅氧烷涂层(PDMS,100μm)和商用聚丙烯酸酯涂层(PA,85μm)。将此方法应用于两种实际水样的检测,没有检测到4种苯系物,在两个不同浓度的加标条件下,样品回收率均在81.0%~112.8%之间,满足实际分析要求。     

顶空-固相微萃取-气相色谱-质谱法测定烟气中挥发性和半挥发性成分

提出了顶空-固相微萃取-气相色谱-质谱法测定烟气中挥发性和半挥发性成分。结合信息量最大的原则,确定了固相微萃取时萃取纤维头为碳分子筛/聚二甲基硅烷萃取纤维头,萃取温度为70℃,萃取时间为60min。在气相色谱分离中用Agilent DB-1色谱柱为固定相,在质谱分析中采用全扫描模式。结果表明:共鉴定出107种成分,含量最大的成分是烟碱(18.07%),其次是新植二烯(11.46%),主要的3类挥发性和半挥发性成分依次为苯系物、酮类以及杂环类。     

固相微萃取-气相色谱法测定食品添加剂中有害有机挥发杂质

建立了固相微萃取（SPME）-气相色谱法（GC）测定食品添加剂中有害有机挥发杂质：二氯甲烷、三氯甲烷、苯、三氯乙烯和1、4-二n恶烷的方法。以聚二甲基硅氧烷（PDMS）涂层的萃取纤维萃取糖精钠、柠檬酸、苯甲酸钠溶液中的待测组分。以HP-5毛细管柱为分离柱，火焰离子化检测器（FID）定量测定。优化了固相微萃取条件：萃取纤维、萃取方式、萃取温度、平衡时间、pH及电解质浓度等。在优化的试验条件下，进行了方法的检出限、精密度、回收率试验。5种组分的回收率在97．3％～103．9％之间。     

有序介孔碳涂层修饰固相微萃取纤维的制备及吸附性能研究

以酚醛树脂为碳源,三嵌段共聚物F127为软模板剂,制备了具有有序介孔碳涂层的固相微萃取纤维。氮气吸脱附表征表明,粉末介孔碳比表面积929 m2/g,平均孔径5.1 nm。利用气相色谱-飞行时间质谱联用技术,介孔碳涂层修饰的固相微萃取纤维对多种有机物萃取结果表明纤维对苯系物有较佳的萃取性能。介孔碳涂层是一种具有应用前景的新型固相微萃取涂层。     

顶空固相微萃取-气相色谱-质谱联用法测定海洋沉积物中的苯系物

利用顶空固相微萃取（HS-SPME）与气相色谱-质谱（GC-MS）联用建立了测定海洋沉积物中的苯、甲苯、乙苯、对二甲苯、间二甲苯、邻二甲苯以及苯乙烯等7种常见苯系物的检测分析方法。对无机盐的加入、平衡时间、萃取温度、萃取时间、解吸温度和时间等多个固相微萃取条件以及色谱条件进行了优化,内标法定量。结果表明：在0.500~20.0 ng/g范围内7种苯系物的线性关系良好,相关系数在0.995~0.999之间;方法检出限为0.0818~0.175 ng/g（干重）;日内和日间重现性较好,相对标准偏差分别为1.2%~3.6%（n=5）和0.4%~6.3%（n=3）;在每1.00 g海洋沉积物样品中2.0和15.0 ng加标水平下,平均加标回收率分别为61.7%~79.5%和77.1%~85.6%,相对标准偏差分别为5.4%~9.6%和3.9%~7.6%（n=5）。该方法快速、灵敏、简便,准确度高,重现性好,适合海洋沉积物样品中苯系物的痕量分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.