Mn2Ca双金属簇合物组装去Mn光系统II水氧化复合物的研究

报道了Mn₂Ca双金属簇合物与去锰的PSII 颗粒的光组装过程, 发现Mn₂Ca化合物具有明显的恢复去锰PSII的电子传递和放氧活性的能力, 并且表现了比MnCl₂更高的光组装效率. 我们认为该化合物中Ca与Mn原子之间的羧酸酯桥的连接方式可能有利于水氧化复合物(WOC)的光组装及锰簇的稳定.     

光合放氧复合物锰簇光组装

在光系统II水氧化过程中, 由锰簇及其附近一个具氧化还原活性的酪氨酸Y_Z组成的光合放氧复合物通过4个连续的氧化还原反应将水裂解为质子和氧气。在光系统II的功能性组装过程中,光合放氧复合物锰簇是通过一个被称作光组装的过程形成的。结合当前的研究进展,本文详尽地介绍了光合放氧复合物锰簇光组装的动力学模型、与锰簇形成相关的蛋白及锰簇的外围配体、锰与去锰光系统II的结合特性、其它辅助因子对锰簇光组装的影响及锰簇光组装的机理。此外,结合我们的研究结果,对人工合成的锰化合物与去锰光系统II放氧复合物的光组装进行了综述和讨论。本文最后介绍了目前光合放氧复合物锰簇结构及功能研究中存在的一些问题,并对光合放氧复合物锰簇结构及功能研究的应用前景进行了展望。     

新型配合物Mn2Hg4(SCN)12的合成与晶体结构分析

A new inorganic coordination compound Mn₂Hg₄(SCN)₁₂ was synthesized. The grown crystals were characterized by elemental analysis, infrared spectroscopic analysis and powder crystal X-ray diffraction in detail. The crystal structure of Mn₂Hg₄(SCN)₁₂ was determined by single-crystal X-ray diffraction. It belongs to monoclinic system, P2₁/c space group. The cell dimensions are: a=1.171 6 nm, b=1.431 05 nm, c=2.105 1 nm, β=100.738°, and Z=4. In the structure of it, half of Mn²⁺ cations have five-coordinate number, and other half of Mn²⁺ cations have six-coordinate number; 3/4 of Hg²⁺ cations are coordinated by four SCN^-, 1/4 of Hg²⁺ cations are coordinated by three SCN^- and one NCS^-, all the coordination geometry of Hg²⁺ show slightly distorted tetrahedrons. CCDC: 244939.     

Mn2O3纳米结构的简易合成与电化学性质

用简易的室温或水热方法制备出不同形貌的MnCO₃微结构。经600 ℃热处理后,室温制备MnCO₃转变成Mn₂O₃胶体片,而水热制备MnCO₃样品则形成多孔Mn₂O₃纳米结构。然而,室温制备MnCO₃经120 ℃热处理后形成Mn₂O₃晶相。制备样品经过XRD和SEM表征表明,热处理MnCO₃前驱物形成Mn₂O₃过程导致产物形貌与结构变化。其形成机理又通过TEM和FTIR进一步研究。Mn₂O₃纳米结构的电容性质通过循环伏安法表征,结果表明Mn₂O₃形貌与结构对其电容有重要影响。     

一个Yb8簇合物的合成、结构及CO2催化转化性质

使用多齿席夫碱配体H₂L与Yb(acac)₃·2H₂O反应,设计并通过溶剂热法合成了一例结构新颖的八核镱簇合物[Yb₈(acac)₄(HL)₄(L)₂(μ₃-O)₄(C₂H₅O)₄]·2C₂H₅OH·2CH₂Cl₂ (1)。单晶 X 射线衍射分析表明,簇合物呈中心对称的八核结构,中心稀土离子Yb1(Ⅲ))为八配位的双帽三角棱柱几何构型,Yb2、Yb3和Yb4均为七配位,分别为单帽三角棱柱、五角双锥及单帽八面体几何构型。簇合物1具有良好的溶剂稳定性。近红外荧光测试表明：簇合物1在室温下表现出Yb(Ⅲ)特征发射峰。此外,催化性质研究表明：簇合物1可以有效地催化CO₂与环氧化合物的环加成反应,且作为异相催化剂表现出良好的循环性能。     

三核钨簇合物-V2O5催化剂对苯乙烯氧化反应的催化

本文研究了三核钨簇合物［W₃O₂(CH₃CO₂)₆(H₂O)₃］Br₃·2H₂O与一些物质组成的二元催化剂对苯乙烯氧化反应的催化作用,结果表明：钨簇合物-V₂O₅催化剂对苯乙烯氧化反应的催化效果特别显著,而且在反应前后其重量、结构及催化活性基本不变,可以多次回收重复使用。对影响钨簇合物-V₂O₅催化剂催化性能的几个因素进行了讨论,测定了催化剂及其吸附氧气的红外光谱,说明钨簇合物及V₂O₅可以与O₂形成分子氧配合物及超氧(O^-₂)配合物。     

BiVO4/ZnFe2O4同型异质结光阳极的构筑及其光电催化分解水性能

光生电子-空穴对的复合被认为是限制BiVO₄材料光电催化转换效率的重要原因之一。基于此,通过简单的水热-煅烧方法构筑了 BiVO₄/ZnFe₂O₄同型异质结光阳极,BiVO₄/ZnFe₂O₄复合光阳极在 1.23 V(vs RHE)下的光电流密度为 3.33 mA·cm^-2,较纯BiVO₄提升了2倍 (1.20 mA·cm^-2)。相关的结构及性能测试表明,BiVO₄和ZnFe₂O₄形成了带隙错开的n-n异质结,使得光生载流子得到有效分离,更有效地参与水氧化过程,进而提高了BiVO₄的光电催化水分解性能。     

簇合物(p-H2)N-HCCCN的结构和能量

采用两体作用势模型和遗传算法对簇合物（p-H₂）_N-HCCCN的极小能量结构和能量进行了理论研究.结果表明,20 个para-H₂分子形成HCCCN周围的第一个溶剂层,第一个溶剂层包含三个溶剂环,每个溶剂环都有6 个para-H₂分子,第19和20个para-H₂分子分别聚集在HCCCN分子的N、H原子末端. 进一步计算了（p-H₂）_N-HCCCN的化学势,发现化学势随para-H₂分子个数的增加呈震荡变化.     

Cu4簇合物“元件组装”合成及其结构与电催化作用

以元件组装方法合成了Cu₄(HL)₄·2H₂O簇合物(H₂L=N-乙氧羰基-N’-o-硝基苯基硫脲)。用X射线单晶衍射技术、核磁共振谱、红外光谱和元素分析等确定了簇合物及其相应组装元件的晶体结构和化学组成,并对簇合物的电催化性质进行了检测。结果表明,该簇合物由4个Cu(Ⅰ)以M-M键构成簇核,4个硫脲配体分别以硫羰基硫原子和氮原子配位于Cu(Ⅰ)构成簇合物配位结构,DPV分析显示该簇合物对O₂具有较高催化活性。     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.     

Preparation of Mn2O3 and Mn3O4 nanofibers via an electrospinning technique

Thin PVA/manganese acetate composite fibers were prepared by using sol-gel processing and electrospinning technique. After calcinations of the above precursor fibers, Mn₂O₃ and Mn₃O₄ nanofibers with a diameter of 50-200 nm could be successfully obtained. The fibers were characterized by TG-DTA, Scanning electron microscopy, FT-IR, WAXD, respectively. The results showed that the crystalline phase and morphology of nanofibers were largely influenced by the calcination temperature.     

Magnetic properties of Mn2V2O7 single crystals

Magnetic properties of Mn₂V₂O₇ single crystals are investigated by means of magnetic susceptibility, magnetization, and heat capacity measurements. A structural phase transition of the α-β forms is clearly observed at the temperature range of 200-250 K and an antiferromagnetic ordering with magnetic anisotropy is observed below 20 K. A spin-flop transition is observed with magnetic field applied along the [110] axis of β-Mn₂V₂O₇, of which corresponds to the [001] axis of α-Mn₂V₂O₇, suggesting that the spins of Mn²⁺ ions locate within honeycomb layers which point likely in the [110] direction of β-Mn₂V₂O₇ or the [001] axis of α-Mn₂V₂O₇. However, a rather small jump of magnetization at spin-flop transition suggests a possible partition of crystal to some domains through β-to-α transition on cooling or much complex spin structure in honeycomb lattice with some frustration.     

Catalytic reduction of nitrogen monoxide with propene over Nb/TiO2 mixed mechanically with Mn2O3

Selective catalytic reduction of nitrogen monoxide (NO) over a catalyst of mechanically mixed Nb/TiO₂ and Mn₂O₃ (Mn₂O₃+Nb/TiO₂) in an oxidizing atmosphere with propene (C₃H₆) was studied. The Mn₂O₃+Nb/TiO₂ catalyst showed high activity for the reduction of NO to N₂. The maximum conversion of NO to N₂ was observed at 200∼300°C, with about 80% reduction of NO to N₂. Mn₂O₃ enhanced the formation of NO₂ from NO and the activation of propene to react with NO₂ for reduction to N₂.     

NO在Mn_2O_3(110)表面吸附的密度泛函理论研究

基于第一性原理密度泛函计算方法研究了NO在Mn_2O_3(110)面的吸附行为,计算了Mn_2O_3(110)面吸附NO和O_2的吸附构型的结构参数、吸附能和电子结构.结果表明,在Mn_2O_3(110)表面上,NO倾向于吸附在Mn top位,吸附前后的结构总能变化在-0.61~-1.29 eV之间,NO吸附后Mn吸附位周围的配位结构发生变化,使得Mn的电子向NO转移.进一步研究了吸附O_2后的Mn_2O_3表面再进一步吸附NO的行为,发现了ONOO*结构的形成.NO和O_2在表面共吸附形成ONOO*结构时的吸附能(-1.23和-1.39 eV)高于单纯吸附NO时的吸附能,此时Mn的电子向ONOO*结构转移,NO和O_2投影态密度的电子峰广泛交叠,说明成键原子之间有强共价键作用.     

Hydrophilic and hydrophobic nano-sized Mn3O4 particles

Mn₃O₄ Hausmanite nanoparticles were prepared in aqueous solution by using metallic salt and hydrazine as precursor and reducing agent, respectively. The crystallite sizes ranged from 10 to 20 nm and the particle diameter distribution was very narrow and estimated between 20 and 30 nm. Influence of some parameters such as temperature, time of reaction, surfactant nature was studied for a synthesis in an aqueous medium. The as-made manganese oxides particles could be dispersed in an organic solvent containing stabilizing agents, according to perform the synthesis in an H₂O/n-hexan two-phase medium. These nanoparticles were characterized by X-ray diffraction, infrared spectroscopy, scanning and transmission electron microscopies and nitrogen absorption measurements.     

Crystal structure and characterization of Rb2Ca[B4O5(OH)4]2·8H2O

Dirubidium calcium tetraborate octahydrate, Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O, was prepared by reaction of Rb-borate aqueous solution with CaCl₂ and it's structure has been determined by single-crystal X-ray diffraction data. It crystallizes in the orthorhombic system, space group P2₁2₁2₁ with unit cell parameters, Z=4, The structure contains alternate layers of [B₄O₅(OH)₄]²⁻ polyanions separated by water molecules and Rb, Ca cations. The isolated [B₄O₅(OH)₄]²⁻ is constructed from two BO₃(OH) tetrahedron groups and two BO₂(OH) triangular groups joined at common oxygen atoms. The two BO₃(OH) tetrahedron groups are further linked by means of an oxygen bridge across the ring. The Ca²⁺ ion displays seven coordination, while the two non-equivalent Rb⁺ ions display nine and seven coordination, respectively. Infrared and Raman (4000-400 cm⁻¹) spectra of Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O were recorded at room temperature and analyzed. Fundamental vibrational modes were identified and band assignments were made. The dehydration of this hydrated mixed borate occurs in one step and leads to an amorphous phase which undergoes a crystallization.