新型双核铜金属配合物为中性载体的硫氰酸根离子高选择性电极的研究

研制了基于N,N'-亚乙基(μ-5,5-亚甲基-二水杨醛根)(乙酰丙酮根)合二铜(II) [Cu₂(II)-MDSBAE]金属配合物为中性载体的阴离子选择性电极. 试验表明, 以Cu₂(II)-MDSBAE金属配合物为中性载体的电极对SCN^－具有良好的电位响应特性, 且呈现反Hofmeister行为,其选择性序列为: SCN^－＞Sal^－＞I^－＞ClO₄^－＞NO₃^－＞Br^－＞NO₂^－＞Cl^－≈SO₃^2－＞SO₄^2－. 在pH 5.0的磷酸盐缓冲体系中, 电极电位呈现近能斯特响应, 线性响应范围为1.0×10^－6～1.0×10^－1 mol/L, 斜率为－53. 6 mV/dec (25 ℃), 检测下限为8.1×10^－7 mol/L. 用交流阻抗研究了电极的响应机理, 并用紫外可见光谱技术测定了电极载体与SCN^－, Sal^－, I^－, ClO₄^－和NO₃^－离子间的配位数及缔合常数. 将该电极用于实验室废水和工业废水中硫氰酸根的检测, 其结果令人满意.     

一种基于PVC膜电极的电位式葡萄糖传感器的研制

以三庚基十二烷基碘代季铵盐为电活性物质的PVC膜电极, 对过氧化氢和六价钼的络合物具有良好的电位响应. 将葡萄糖氧化酶固定到PVC膜电极表面, 制备成电位式葡萄糖传感器. 在优化的实验条件下, 该传感器在葡萄糖浓度为2×10^－4～5×10^－3 mol/L范围内有线性响应, 检测下限为5×10^－5 mol/L. 另外该传感器具有较高的稳定性和良好的选择性, 抗坏血酸、尿酸和一些氨基酸未对测定产生干扰.     

石墨烯/铁氰化钴复合膜修饰玻碳电极同时测定对苯二酚、邻苯二酚和间苯二酚

采用滴涂法和电沉积法制备了石墨烯/铁氰化钴复合膜修饰玻碳电极. 用扫描电镜对该纳米复合膜进行了表征.用循环伏安法研究了对苯二酚(HQ)、邻苯二酚(CT)和间苯二酚(RS)在修饰电极上的电化学行为. 实验结果表明, 相对于裸玻碳电极和石墨烯修饰电极, HQ, CT 和RS 在石墨烯/铁氰化钴修饰电极上的氧化峰电流显著提高. 利用差分脉冲伏安法测定, HQ, CT 和RS 分别在1.0×10^－6～1.5×10^－4 mol/L, 1.0×10^－6～2.0×10^－4 mol/L 和3.5×10^－6～2.5×10^－4 mol/L浓度范围内与氧化峰电流呈良好的线性关系, 相关系数分别为0.991, 0.993 和0.992. 信噪比为3 时, HQ, CT 和RS 检出限分别为2.0×10^－7, 2.1×10^－7 和3.5×10^－7 mol/L. 将该方法用于水样分析, 回收率为95.6%～106.1%.     

氮掺杂碳纳米管修饰电极的电化学行为

制备了氮掺杂改性的碳纳米管, 并用循环伏安法(CV)测定了多巴胺(DA)和抗坏血酸(AA)在不同氮含量的碳纳米管修饰电极上的电化学行为. 结果表明, 氮掺杂碳纳米管修饰电极对AA和DA有不同的电催化行为, 其中高氮含量修饰电极对AA的催化作用强, 而低氮含量修饰电极对DA的催化作用强. 微分脉冲伏安法(DPV)的结果显示, DA的氧化峰电流与其浓度在5.0×10^－6～2.0×10^－4 mol/L范围内呈良好的线性关系, 检出限达1.64×10^－6 mol/L (S/N＝3); AA氧化峰电流与其浓度在3.0×10^－5～1.0×10^－2 mol/L范围内呈良好的线性关系, 检出限达3.26×10^－6 mol/L (S/N＝3). 该修饰电极在AA大量存在(AA浓度为DA浓度两万倍)时可选择性地实现多巴胺的测定而不造成干扰.     

碳纳米管修饰金电极检测特定序列DNA

利用化学偶联法将末端修饰氨基的寡聚核苷酸固定在表面修饰有羧基化碳纳米管(CNTs-COOH)的金电极表面, 制备新型核酸探针, 可以特异性结合目标单链寡聚核苷酸. 以阿霉素作为嵌合指示剂, 利用示差脉冲法测定杂交的结果. 经过实验条件的优化, 测定DNA浓度在1.0×10^－6～1.0×10^－9 mol/L呈良好的线性关系. 检测限为: 2.54×10^－10 mol/L. 碳纳米管特有的纳米结构对检测结果的放大作用, 提高了该传感器的检测限和灵敏度.     

修饰铂电极上Cd(Ⅱ)的示波双电位滴定法

制备了镉修饰铂电极, 用循环伏安法表征了Cd(Ⅱ)在该电极上的吸附特性, 探讨了电极的响应机理. 通过优化试验条件, 建立了一种新的测定Cd(Ⅱ)的示波双电位滴定法. 在1.0 mol/L 的六次甲基四胺溶液中(pH＝6.0), 用制备的修饰铂电极作为双指示电极, 以EDTA 标准溶液滴定Cd(Ⅱ), 利用示波器屏幕上荧光点的显著最大位移指示滴定终点.Cd(Ⅱ)在9.0×10^－4～3.5×10^－3 mol/L 时, 回收率为99.8%～100.3%. 该修饰电极具有良好的稳定性和重现性, 在含有1.0×10^－3 mol/L Cd(Ⅱ)的溶液中, 连续13 次测定, 所得终点电位值均在37 mV左右, 其相对标准偏差(RSD)0.02%. 应用该方法测定含镉样品, RSD 值(n＝7)小于0.81%, 回收率为99.71%～100.09%, 测定结果与指示剂法测定值相符.     

基于对氨基苯甲酸/硫堇/纳米金共价修饰玻碳电极的葡萄糖生物传感器

实验制备了以对氨基苯甲酸(4-ABA)、硫堇(TH)、纳米金(Au NPs)共价键合葡萄糖氧化酶的新型葡萄糖生物传感器. 主要采用循环伏安法, 以羟基二茂铁作为电子媒介体, 对含葡萄糖和未含葡萄糖的电解液进行了研究. 结果表明: 传感器的响应电流值随葡萄糖氧化酶膜层数的不同而变化. 考虑到酶电极的长期稳定性与构造简单性, 我们制作了两层葡萄糖氧化酶膜的酶电极. 该传感器对1×10^－2 mol/L葡萄糖的响应电流达2.47 μA, 响应时间仅4.7 s. 该生物传感器检测的线性范围为3×10^－5～1×10^－3 mol/L, 最低检测浓度可达5.8×10^－6 mol/L. 该传感器制备简单, 稳定好, 具有一定的使用价值.     

聚乙烯吡咯烷酮/硫化镉量子点修饰电极的制备及其对血红蛋白的测定研究

制备了聚乙烯吡咯烷酮(PVP)表面修饰的硫化镉(CdS)半导体纳米晶体(量子点), 并将其修饰玻碳电极, 用于血红蛋白(Hemoglobin, Hb)的电化学行为的研究. 实验结果表明, 血红蛋白在该修饰电极上有良好的电流响应, 流动注射分析结果进一步表明该修饰电极具有好的稳定性和重现性. 在1.0×10^－8～2.0×10^－5 mol/L浓度范围内, 血红蛋白的浓度与其响应电流呈良好的线性关系, 线性相关系数为0.9986, 检出限为5.0×10^－9 mol/L. 将该方法用于全血中血红蛋白的测定, 也获得了良好的结果.     

双水杨醛乙二胺中性载体的锰离子电极的研究

研究以双水杨醛乙二胺[BBG]为中性载体,制备了一种对锰离子(Mn2 )具有优良的电位响应特性的离子选择性电极,其选择性次序为:Mn2 >>Rb ＞Al3 ＞Ca2 ＞Bi3 ＞Cu2 ＞Co2 ＞Fe3 ＞Cd2 ＞Ba2 ＞Ce3 ＞Cr3 ＞La3 ＞Na .该电极在pH 3.0的NaOH-HNO3溶液体系中具有最佳的电位响应,在1.0×10-1mol/L～ 1.0×10-5 mol/L Mn2 浓度范围呈近能斯特响应,斜率为32.0 mV/p Mn2 (25 ℃),检测下限为8.0×10-6 mol/L.采用交流阻抗和紫外光谱分析技术研究了配合物本身的结构对电极电位响应行为的作用机理.将该电极用于实际样品的测定,获得满意的结果.     

Ag+存在下催化还原铬黑T及应用于Ag+检测

以铬黑T(EBT)为探针,在有Ag⁺存在的最优条件下,EBT被NaBH 4催化还原,体系在445 nm发射波长处荧光强度明显增强,基于此构建一种光学测定溶液中微量Ag⁺的方法。在最优条件下,Ag⁺浓度在(7.5×10-9~1.0×10^-6 mol·L^-1)范围内呈良好的线性关系,线性回归方程为ΔI F=5.59×10⁸ c-31(c,mol·L^-1,r=0.9966),Ag⁺的最低有效检测浓度为6.0×10^-8 mol·L^-1。在最优条件下,运用该方法对样品中Ag⁺浓度进行检测,样品中Ag⁺浓度的检测回收率在98.8%~102.4%之间,RSD=2.1%。该检测方法能够对水溶液中微量的Ag⁺进行有效定量检测,且操作简单、检测限低、灵敏度高。     

Potentiometric Membrane Electrode for Cr(III) Ion Based on a New Aryl Amide Bifunctional Bridging Ligand as a Neutral Carrier

A novel Cr(III) ion‐selective electrode is constructed by incorporating a new aryl amide bifunctional bridging ligand, 2,2′‐bis{[(2″‐benzylaminoformyl)phenxoyl]methyl}‐diethylether (BBPMD) as a neutral carrier into the PVC matrix. The proposed electrode, with optimum membrane composition, exhibits an excellent near‐Nernstian response for Cr³⁺ ion ranging from 2.8 × 10^?6 to 1.0 × 10^?1 mol/L with a detection limit of 8.6 × 10^?7 mol/L and a slope of 19.5 ± 0.2 mV/dec in pH 3.0 nitrate buffer solution at 25 °C. It has an appropriate response time, suitable reproducibility, and good selectivity towards Cr³⁺ ion. The operational pH range of the proposed electrode is 2.5–6.5. The response mechanism was discussed in view of UV‐vis spectroscopy and the A. C. impedance technique. The excellent analytical features of the proposed electrode could lead to its successful application as an indicator electrode in potentiometric titration of Cr³⁺ ion and in the direct determination of Cr³⁺ ion in tea leaves and coffee samples.     

Novel potentiometric sensor for the determination of Cd2+ based on a new nano-composite

A novel ion selective carbon paste electrode for Cd²⁺ ions based on 2,2′-thio-bis[4-methyl(2-amino phenoxy) phenyl ether] (TBMAPPE) as an ionophore was prepared. The carbon paste was made based on a new nano-composite including multi-walled carbon nanotubes (MWCNTs), nanosilica and room-temperature ionic liquid, 1-Butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆). The constructed nano-composite electrode showed better sensitivity, selectivity, response time, response stability and lifetime in comparison with typical Cd²⁺ carbon paste sensor for the successful determination of Cd²⁺ ions in water and in waste water samples. The best performance for nano-composite sensor was obtained with an electrode composition of 18% TBMAPPE, 20% BMIM-PF₆, 48% graphite powder, 10% MWCNT and 4% nanosilica. The new electrode exhibited a Nernstian response (29.95?±?0.10?mV?decade^?1) toward Cd²⁺ ions in the range of 3.0?×?10^?8 to 1.0?×?10^?1?mol?L^?1 with a detection limit of 7.5?×?10^?9?mol?L^?1. The potentiometric response of prepared sensor was independent of the pH of test solution in the pH range 3.0 to 5.5. It had a quick response with a response time of about 6?s. The proposed electrode showed fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions.     

基于壳聚糖-纳米金/纳米普鲁士蓝/L-半胱氨酸修饰的 葡萄糖传感器的研究

在金电极表面修饰一层L-半胱氨酸,再利用静电吸附作用固定纳米普鲁士蓝(nano-PB),然后利用壳聚糖-纳米金复合膜将葡萄糖氧化酶(GOD)固定于修饰电极表面,制成新型的葡萄糖传感器.通过交流阻抗技术,循环伏安法和计时电流法考察了电极的电化学特性.在优化的实验条件下,该传感器在葡萄糖浓度为3.0×10-6～1.0×10-3 mol/L范围内有线性响应,检测下限为1.6×10-6 mol/L.此外该传感器具有响应快、稳定性好和选择性良好的特点,能有效排除常见干扰物质如抗坏血酸、尿酸等对测定的影响.     

Mixed Aza‐Thioether Crowns Containing a 1,10‐Phenanthroline Sub‐Unit as Neutral Ionophores for Silver Ion

Three different recently synthesized aza‐thioether crowns containing a 1,10‐phenanthroline sub‐unit (L1–L3) and a corresponding acyclic ligand (L4) were studied to characterize their abilities as silver ion ionophores in PVC‐membrane electrodes. Novel conventional silver‐selective electrodes with internal reference solution (CONISE) and coated graphite‐solid contact electrodes (SCISE) were prepared based on one of the 15‐membered crowns containing two donating S atoms and two phenanthroline‐N atoms (L1). The electrodes reveal a Nernstian behavior over wide Ag⁺ ion concentration ranges (1.0×10^?5?1.0×10^?1 M for CONISE and 5.0×10^?8?4.0×10^?2 M for SCISE) and very low limits of detection (8.0×10^?6 M for CONISE and 3.0×10^?8 M for SCISE). The potentiometric response is independent from pH of the solution in the pH range 3.0–8.0. The electrodes manifest advantages of low resistance, very fast response and, most importantly, good selectivities relative to a wide variety of other cations. The electrodes can be used for at least 2 months (for CONISE) and 4 months for (SCISE) without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of Ag⁺ ion and in the determination of silver in photographic emulsions and in radiographic and photographic films.     

Carbon Paste Electrode Modified with Functionalized Nanoporous Silica Gel as a New Sensor for Determination of Silver Ion

A new dipyridyl‐functionalized silica gel (DPSG) was synthesized. The potentiometric response of silver ion was investigated at a carbon paste electrode chemically modified with functionalized nanoporous silica gel. The electrodes with a DPSG proportions of 10.1% (w/w), showed very stable potential. Calibration plots with Nernstian slopes for Ag⁺ were observed, 58.7 (±0.9) mV decade^?1, over a wide linear range of concentration (5.0×10^?7 to 1.0×10^?1 M). The electrode has a detection limit of 1.0×10^?7 M. The selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode has fast response time, high performance, high sensitivity in wide cation activity ranges, and good long term stability (more than 6 months). The method was satisfactory and used to determine the concentration of silver ion in waste waters contaminated by this metal.     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Development of Pr(III) Selective Electrode Using 1,6,7,12‐Tetramine‐2,5,8,11‐tetraoxo‐1(12),6(7)‐di(biphenyl)‐dodecane (TATODBDD) as a Neutral Carrier

A polyvinyl chloride (PVC) membrane based Pr(III) selective electrode was constructed using 1,6,7,12‐tetramine‐2,5,8,11‐tetraoxo‐1(12),6(7)‐di(biphenyl)dodecane (TATODBDD) as a neutral carrier. The sensor exhibits a Nernstian response for Pr(III) ions, a wide concentration range of 3.9×10^?7?1.0×10^?1 mol/L with a detection limit of 5.0×10^?8 mol/L and slope of 19.5 mV/decade. The developed sensor revealed relatively good selectivity and high sensitivity for Pr(III) ions over the other lanthanide ions. The potentiometric response of the sensor is independent in the pH range 2.9–9.5. The advantages of sensor are low resistance, very fast response time (<10 s) with good selectivity. This sensor can be used up to 6 weeks without any divergences in potential response.