TiO2-双亲共聚物复合纳米粒子的合成与紫外光敏特性

用偶联剂乙烯基三乙氧基硅烷改性纳米粒子TiO₂, 应用超声技术将TiO₂ 纳米粒子分散在甲醇介质中, 然后用苯乙烯(ST)原位聚合包封, 再用丙烯酰胺或乙烯基吡咯烷酮(VP)共聚, 两步原位分散聚合得到了有机聚合物为壳、TiO₂为核的有机/无机复合粒子. 用红外光谱、紫外-可见光谱、透射电子显微镜等检测手段进行表征. 结果显示: 由于双亲共聚物对TiO₂纳米粒子的敏化作用, 紫外-可见光谱图上两种纳米复合粒子的最大吸收峰均有明显红移, 并且吸收光谱的范围扩大了, 其中尤以TiO₂/(PST-co-PVP)为甚. 意味着光敏化活性的提高, 特别是在可见光谱的范围内. 这种情形对宽带隙半导体材料如TiO₂纳米粒子的光催化特性是有利的, 表明这类材料的应用空间得到了拓展.     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

纳米TiO2表面接枝聚苯乙烯及其抗紫外老化研究

利用偶联剂γ-甲基丙烯酰氧基丙基三甲氧基硅烷(KH570)对纳米TiO₂进行表面预处理, 在此基础上通过分散聚合工艺制备聚苯乙烯(PSt)接枝包覆纳米TiO₂. 运用红外光谱、热重分析及透射电镜对处理前后纳米TiO₂进行了表征, 并通过紫外人工加速老化试验比较了表面处理前后纳米TiO₂对聚丙烯/聚苯乙烯(PP/PSt)体系的抗紫外老化性能. 结果显示: KH570与纳米TiO₂表面羟基进行了缩合, PSt在粒子表面实现了接枝聚合, 接枝率约为60% (w); PSt接枝包覆纳米TiO₂呈均匀的微球形, 纳米TiO₂被包覆于微球内部; PSt接枝包覆后纳米TiO₂在PP/PSt中的分散效果较改性前有显著的改进, 其抗紫外老化性能明显优于改性前体系.     

LB技术制备SnO2-TiO2无机交替纳米薄膜

采用LB技术将SnO₂纳米粒子和TiO₂纳米粒子组装进花生酸的交替多层膜，通过热处理除去膜中的有机成分后，采用红外光谱、紫外可见光谱、X-光电子能谱、低角X-射线衍射、原子力显微镜以及扫描电子显微镜等手段对处理后的膜进行了形貌、组成和结构表征，表明制得的是SnO₂纳米粒子-TiO₂纳米粒子无机-无机交替的均匀的纳米薄膜。     

纳米TiO2/聚N-异丙基丙烯酰胺复合水凝胶的合成及其表征

通过利用偶联剂和超声分散将TiO₂表面功能化, 在其表面引入烯键, 与聚N-异丙基丙烯酰胺在交联剂存在下共聚, 制备了不同纳米TiO₂含量的聚N-异丙基丙烯酰胺复合水凝胶．采用红外光谱、扫描电镜、紫外光谱、热重分析、动态粘弹谱仪等表征了复合水凝胶的微观结构和形貌, 测试了复合凝胶材料对紫外线的吸收、热稳定性、机械强度及其韧性. 结果表明: 纳米TiO₂粒子的引入, 使得复合凝胶材料对紫外线吸收效果显著, 凝胶的稳定性、机械强度及韧性得到明显改善.     

B离子掺杂TiO2催化剂(TiO2－xBx)光催化活性的研究

采用溶胶-凝胶法制备出纳米TiO₂和TiO_2－xB_x催化剂. 光催化实验证明, TiO_2－xB_x催化剂的紫外、可见光催化活性均高于TiO₂. XRD, XPS和Raman结果表明, B离子是以取代式掺杂占据了TiO₂的O^2－的晶格位置. UV-Vis和PL谱的结果表明, B离子的2p轨道与O的2p轨道形成混合价带, 产生可见光响应, B离子的掺入有效地阻止了光生载流子的复合, 促进了其分离, 是TiO_2－xB_x催化剂紫外、可见光催化活性提高的主要原因.     

离子液体中纳米TiO2/聚3-甲基噻吩复合膜的制备及性质研究

采用溶胶凝胶法制成了纳米TiO₂电极, 在离子液体中将其应用于3-甲基噻吩的电化学聚合, 采用循环伏安法(CV), 在线紫外可见光谱(UV-Vis), 扫描电镜(SEM)和电化学阻抗谱(EIS)对TiO₂/聚3-甲基噻吩(TiO₂/PMT)复合膜进行了表征并研究了其电化学性质. 实验证明, 不论是用循环伏安法, 恒电位, 还是恒电流方法, 都能在电极上得到聚3-甲基噻吩(PMT)膜, 并伴随有明显的掺杂和去掺杂过程. 对应的在线紫外可见光谱上, 也出现了氧化和还原两种不同的吸收状态, 还原(去掺杂)过程中在480 nm处有一个吸收峰, 而氧化(掺杂)过程中此峰消失, 取而代之的是一个可见光区的逐渐增强的吸收. PMT膜是p型半导体, TiO₂是n型半导体, 两者之间能够形成p-n异质结, 使光电转换效率得以提高. SEM给出了TiO₂电极和聚合物修饰的TiO₂的形貌图, 电极的交流阻抗谱则从一个角度说明了聚合物膜修饰电极的导电性.     

离子液体中纳米TiO2/聚3-甲基噻吩复合膜的制备及性质研究

采用溶胶凝胶法制成了纳米TiO₂电极, 在离子液体中将其应用于3-甲基噻吩的电化学聚合, 采用循环伏安法(CV), 在线紫外可见光谱(UV-Vis), 扫描电镜(SEM)和电化学阻抗谱(EIS)对TiO₂/聚3-甲基噻吩(TiO₂/PMT)复合膜进行了表征并研究了其电化学性质. 实验证明, 不论是用循环伏安法, 恒电位, 还是恒电流方法, 都能在电极上得到聚3-甲基噻吩(PMT)膜, 并伴随有明显的掺杂和去掺杂过程. 对应的在线紫外可见光谱上, 也出现了氧化和还原两种不同的吸收状态, 还原(去掺杂)过程中在480 nm处有一个吸收峰, 而氧化(掺杂)过程中此峰消失, 取而代之的是一个可见光区的逐渐增强的吸收. PMT膜是p型半导体, TiO₂是n型半导体, 两者之间能够形成p-n异质结, 使光电转换效率得以提高. SEM给出了TiO₂电极和聚合物修饰的TiO₂的形貌图, 电极的交流阻抗谱则从一个角度说明了聚合物膜修饰电极的导电性.     

纳米TiO2/聚N-异丙基丙烯酰胺复合水凝胶的合成及其表征

通过利用偶联剂和超声分散将TiO₂表面功能化, 在其表面引入烯键, 与聚N-异丙基丙烯酰胺在交联剂存在下共聚, 制备了不同纳米TiO₂含量的聚N-异丙基丙烯酰胺复合水凝胶．采用红外光谱、扫描电镜、紫外光谱、热重分析、动态粘弹谱仪等表征了复合水凝胶的微观结构和形貌, 测试了复合凝胶材料对紫外线的吸收、热稳定性、机械强度及其韧性. 结果表明: 纳米TiO₂粒子的引入, 使得复合凝胶材料对紫外线吸收效果显著, 凝胶的稳定性、机械强度及韧性得到明显改善.     

核/壳型CdTe@SiO2荧光纳米复合粒子的制备与表征

利用反相微乳法, 以巯基乙酸修饰的水溶性CdTe量子点为核, 包覆SiO₂, 制备得到核壳型CdTe@SiO₂荧光纳米复合粒子. 用紫外-可见(UV-vis)分光光度计, 荧光(PL)分光光度计, 红外(FT-IR)光谱仪, 透射电子显微镜(TEM)等分析测试手段, 对得到的荧光纳米复合粒子的性能进行表征, 结果表明: 得到的CdTe@SiO₂纳米复合粒子是核壳型结构, 由SiO₂壳层包覆多个量子点, 其大小均匀, 水溶性好, 有效地提高了量子点的稳定性, 大大增强了其抗光漂白性能, 为该材料的进一步生物应用打下了良好的基础.     

Sol-gel preparation and spectroscopic study of the pyrophanite MnTiO_3 nanoparticles

Titanium dioxide (TiO2) is one of the green cata-lysts, which has attracted much attention due to its promising applications in the purification of air, the bactericidal action of water, and environmental photocatalytic degradation of organic pollutant co…     

金纳米颗粒在不同包裹介质中的超快等离子体动力学

Herein, we prepared four samples, namely gold/poly(sodium-p-styrenesulfonate) (Au/PSS), gold/silicon dioxide (Au/SiO₂), gold/titanium dioxide (Au/TiO₂), and gold/cuprous oxide (Au/Cu₂O) core/shell nanocomposites, to investigate how the surrounding medium affects the ultrafast plasmon dynamics of Au nanoparticles (NPs). We recorded femtosecond transient absorption spectra of Au NPs in Au/PSS, Au/SiO₂, Au/TiO₂, and Au/Cu₂O core/shell nanocomposites at various time delays. We found that the spectral features in the femtosecond transient absorption spectra of Au NPs in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites were dramatically different from those of Au NPs in Au/PSS and Au/SiO₂ core/shell nanocomposites. A comprehensive analysis of the ultrafast plasmon dynamics of Au NPs in the core/shell nanocomposites revealed that following excitation of the resonance plasmon band of Au NPs, the exited electrons could be efficiently transferred into the conduction bands of TiO₂ and Cu₂O in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites.     

共沉淀法制备氧化硅改性的纳米二氧化钛及其性质

采用共沉淀法合成了氧化硅改性的具有高比表面积的纳米二氧化钛.氧化硅的添加提高了二氧化钛纳米颗粒的热稳定性能,有效地抑制了纳米二氧化钛的颗粒增长、团聚和锐钛向金红石的晶型转换.光催化降解亚甲基蓝证明,样品具有较高的光催化活性,而且随着氧化硅添加量的增加,光催化活性提高.     

CNTs/TiO2多孔复合膜的组装及光催化性能

提出了一种在掺氟的SnO2(FTO)导电玻璃上组装碳纳米管(CNTs)/Fe-Ni/TiO2多孔复合膜光催化剂的新方法.采用喷涂热解法(SPD)将掺杂镍和铁的含有嵌段聚合物P123的二氧化钛前驱体溶胶涂覆在FTO导电玻璃上,制备Fe-Ni/TiO2多孔膜,再采用化学气相沉积法(CVD)在Fe-Ni/TiO2膜上原位生长CNTs,得到CNTs/Fe-Ni/TiO2多孔复合膜光催化剂.CNTs/Fe-Ni/TiO2复合膜具有多级孔结构特征,在TiO2表面原位生长的CNTs不但具有较好的石墨化结构,且CNTs较均匀地分布在整个膜层的孔中.考察了CNTs/Fe-Ni/TiO2复合膜光催化剂的结构和性能,并通过降解甲基橙溶液评价了复合膜的光催化活性.结果表明,CNTs的复合及铁和镍的掺杂等改性显著提高了TiO2膜材料的光催化活性.     

Dispersing and functionalizing multiwalled carbon nanotubes in TiO2 sol

We report that oxidized multiwalled carbon nanotubes (MWCNTs) can be synchronously dispersed and functionalized in TiO2 sol via an in situ sol-gel process. Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and atomic force microscopy (AFM) were used to characterize the functionalized MWCNTs. The results revealed that the hydrolysis and condensation originated from Ti(OC4H9)4 molecules favor the dispersion of MWCNTs in as-prepared TiO2 sol. Based on the strong interaction between the oxidized MWCNTs and TiO2 sol during the in situ sol-gel process, MWCNT (core)-TiOx (shell) tubular composites and TiO2 nanotubes can be obtained through filtrating, washing, and annealing of this kind of TiO2 sol containing functionalized MWCNTs, as revealed by TEM, XPS, Raman spectroscopy, and redispersion experiment. By casting the dilute dispersion of functionalized MWCNTs onto a hydrophilic Si surface, discrete and individual nanotubes can be observed by AFM.     

光诱导聚合制备聚噻吩/二氧化钛复合粒子的结构及光催化性能

通过光诱导噻吩在TiO2的氯仿悬浮液中聚合反应,制备了聚噻吩/二氧化钛(PTh/TiO2)复合粒子,并采用比表面积分析仪、扫描电子显微镜、粒径分析仪、X射线光电子能谱、紫外-可见漫反射光谱和红外光谱对复合粒子进行了表征.结果表明,PTh/TiO2复合粒子上的聚噻吩骨架中S原子与TiO2粒子间存在强相互作用,该复合粒子对...     

Synthesis and Characterization of a Novel Graphene Oxide/titanium Dioxide Solvent-free Nanofluid

A novel graphene oxide/titanium dioxide(GO/TiO_2) solvent-free nanofluid was firstly synthesized by employing GO, which was in-situ deposited by TiO_2 as the core and(3-Glycidyloxypropyl) trime thoxysilane(KH560) and polyetheramine-M2070 as the shell. The morphology and structure of GO/TiO_2 nanofluid were verified by Transmission electron microscopy(TEM), X-ray diffraction(XRD) analysis, Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and UV-vis absorption spectra. These studies confirmed that TiO_2 has been deposited onto GO with good dispersion, and the organic shell has been grafted onto the core successfully. Thermo gravimetric analysis(TGA) and viscosity analysis indicated that this nanoparticle hybrid material presented a liquid state without solvent at room temperature, and has great fluidity and thermal stability. The solubility investigation of GO/TiO_2 nanofluid revealed its excellent amphiphilicity and the potential as the functional nanocomposites.     

Hydrothermal synthesis, characterization, and photocatalytic performance of silica-modified titanium dioxide nanoparticles

Silica-modified titanium dioxides were prepared by a hydrothermal method and then characterized by XRD, FT-IR, XPS, TEM, and UV-visible spectroscopy. The silica-modified titanium dioxides were in anatase phase and had large surface areas. There was strong interaction between SiO2 and TiO2, and TiOSi bonds formed during the hydrothermal process. The addition of silica in TiO2 particles could effectively suppress the formation of the rutile phase and the growth of titanium dioxide crystals. DRS spectra proved an increase in the band-gap transition with the increase of silica. The silica-modified TiO2 nanoparticles exhibited better photocatalytic activity, which increased with the silica amount, in comparison with pure TiO2 nanoparticles. Due to better thermal stability, the photocatalytic activity of the silica-modified TiO2 sample held good photocatalytic activity even after calcined at 1273 K.     

纳米结构TiO2/SiO2的逐层自组装

采用逐层自组装方法在二氧化硅球表面交替组装了十二烷基硫酸钠单分子膜和二氧化钛纳米粒子膜 ,该复合多层膜经高温煅烧后得到了核壳型纳米结构二氧化钛 /二氧化硅复合颗粒 .利用XRD ,SEM ,X射线能谱等对复合颗粒进行了表征 .结果表明 :二氧化钛在复合颗粒表面排列紧密、均匀 ,粒径在 5 0nm左右 ,为锐钛矿型结构 .复合颗粒中二氧化钛的含量随组装层数的增加而均匀增加     

Formation and properties of composites based on microgels of a responsive polymer and TiO2 nanoparticles

Organic-inorganic composites were prepared with titanium dioxide (TiO2) nanoparticles embedded within colloidal particles of a cross-linked, thermally responsive polymer. To promote the incorporation of unaggregated nanoparticles of TiO2, temperature responsive microspherical gels (microgels) of N-isopropylacrylamide (NIPAM) with interpenetrating (IP) linear chains of poly(acrylic acid) (PAAc) were synthesized. Dynamic light scattering (DLS) measurements revealed that these microgels reversibly shrink and swell in diameter from 300-400 nm to 600-800 nm with temperature. Two types of nanoparticles of TiO2 were immobilized within the IP-microgels-fine TiO2 nanoparticles synthesized by the hydrolysis of titanium(IV) isopropoxide and commercially available Degussa P25. Characterization of the composite was conducted using transmission electron microscopy (TEM) and UV-vis absorption spectroscopy from which it was determined that the extent of loading of the TiO2 within the colloidal particles can be easily manipulated from a low value of 10% (weight) to a value as high as 75%. The TiO2 nanoparticles were in a dispersed state within the microgels and the composites showed rapid (approximately minutes) sedimentation, which is useful for gravity separations. By using turbidometry to characterize the settling behavior of the organic-inorganic composites, it was found that the settling time decreases as the content of TiO2 increases within the particles.