pH-responsive microgels containing hydrophilic crosslinking co-monomers: shell-exploding microgels through design

pH-responsive microgels are crosslinked polymer colloids that swell when the pH approaches the pK _a of the particles. They have potential application for injectable gels for tissue repair and drug delivery systems. This study focuses on the pH-triggered gelation behaviour of a series of poly (EA/MAA/X) microgels. EA and MAA are ethylacrylate and methacrylic acid. Here, we investigate the effect of crosslinking monomer type (X) on microgel properties. The crosslinking monomers used were poly (ethyleneglycol) dimethacrylate (PEGD), ethyleneglycol dimethacrylate (EGD) and butanediol diacrylate (BDD). The microgel containing PEGD (m-PEGD) is a new system. The microgel containing BDD (m-BDD) was used as a control system. The concentrated microgel dispersions formed physical gels when the pH was increased to 5.3?C6.7, and the polymer volume fractions (? _p ) were above about 0.05. Evidence from photon correlation spectroscopy (PCS) and dynamic rheology was presented for abrupt pH-triggered increases, and then decreases of the hydrodynamic diameters for m-PEGD and the microgel prepared using EGD (m-EGD). This appears to be tuneable through crosslinker structure. An unexpected gelation behaviour, which may involve a new gel state for microgels, was found for m-PEGD dispersions. Uniquely, those dispersions formed gels at pH values less than the microgel's pK _a . This behaviour was linked to an outer-shell electrostatic repulsive interaction. The data point to a phenomenon, whereby the m-PEGD shells appear to explode at pH values above 7.0. The control microgel prepared, using BDD (m-BDD), did not show any evidence of shell fragmentation at any pH. That microgel has potential as a model pH-responsive microgel system in that the properties measured by PCS and rheology agreed well. To probe that system in more detail, the rheological data for m-BDD was analysed using scaling theory. The variation of the storage modulus (G') with ? _p gave a scaling exponent of 2.0.     

Facile synthesis of thermo- and pH-responsive biodegradable microgels

A novel and facile strategy has been designed to prepare biodegradable microgels with thermo- and pH-responsive property. The microgels were synthesized by the crosslinking of N-isopropylacrylamide with vinyl groups functionalized poly(L-glutamic acid) (PGA). The resultant microgels exhibited pH-dependent phase transition behaviors in aqueous solutions and underwent abrupt lower critical solution temperature decrease when the pH was reduced below the pK _a of PGA. Dynamic light scattering measurement revealed that the microgels exhibited shrinkage as the temperature increased or the pH decreased.     

Microwave, photo- and thermally responsive PNIPAm-gold nanoparticle microgels

Microwave-, photo- and thermo-responsive polymer microgels that range in size from 500 to 800 microm and are swollen with water were prepared by a novel microarray technique. We used a liquid-liquid dispersion technique in a system of three immiscible liquids to prepare hybrid PNIPAm- co-AM core-shell capsules loaded with AuNPs. The spontaneous encapsulation is a result of the formation of double oil-in-water-in-oil (o/w/o) emulsion. It is facilitated by adjusting the balance of the interfacial tensions between the aqueous phase (in which a water-soluble drug may be dissolved), the monomer phase and the continuous phase. The water-in-oil (w/o) droplets containing 26 wt% NIPAm and Am monomers, 0.1 wt% Tween-80 surfactant, FITC fluorescent dye and colloidal gold nanoparticles spontaneously developed a core-shell morphology that was fixed by in situ photopolymerization. The results demonstrate new reversibly swelling and deswelling AuNP/PNIPAm hybrid core-shell microcapsules and microgels that can be actuated by visible light and/or microwave radiation (相似文献   

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

Photo- and thermally stimulated relaxation processes in pre-irradiated atomic solids

Atomic and electronic relaxation processes in pre-irradiated atomic solids are considered using preliminary irradiated by an electron beam solid Ar as an example. The results of real-time-correlated study are presented for the first time with an accent on recently found anomalous low-temperature sputtering of Ar atoms from the surface. The experiments were performed using a set of activation spectroscopy methods—thermally stimulated exoelectron emission (TSEE) thermally stimulated luminescence (TSL) in combination with measurements of the sputtering yield. Solid evidence of thermally induced charge recombination mechanism is obtained. Mechanism of energy transfer based on the crowdion model is discussed. Photo-stimulated sputtering from pre-irradiated rare gas solids (RGS) is predicted.     

Synthesis and characterization of novel pH-responsive microgels based on tertiary amine methacrylates

Emulsion polymerization of 2-(diethylamino)ethyl methacrylate (DEA) in the presence of a bifunctional cross-linker at pH 8-9 afforded novel pH-responsive microgels of 250-700 nm diameter. Both batch and semicontinuous syntheses were explored using thermal and redox initiators. Various strategies were evaluated for achieving colloidal stability, including charge stabilization, surfactant stabilization, and steric stabilization. The latter proved to be the most convenient and effective, and three types of well-defined reactive macromonomers were examined, namely, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (PDMA50-St), and partially quaternized styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (10qPDMA50-St). The resulting microgels were pH-responsive, as expected. Dynamic light scattering and 1H NMR studies confirmed that reversible swelling occurred at low pH due to protonation of the tertiary amine groups on the DEA residues. The critical pH for this latex-to-microgel transition was around pH 6.5-7.0, which corresponds approximately to the known pKa of 7.0-7.3 for linear PDEA homopolymer. The microgel particles were further characterized by electron microscopy and aqueous electrophoresis studies. Their swelling and deswelling kinetics were investigated by turbidimetry. The PDEA-based microgels were compared to poly[2-(diisopropylamino)ethyl methacrylate] (PDPA) microgels prepared with identical macromonomer stabilizers. These PDPA-based microgels had a lower critical swelling pH of around pH 5.0-5.5, which correlates with the lower pKa of PDPA homopolymer. In addition, the kinetics of swelling for the PDPA microgels was somewhat slower than that observed for PDEA microgels; presumably this is related to the greater hydrophobic character of the former particles.     

Preparation and characterization of novel cationic pH-responsive poly(N,N'-dimethylamino ethyl methacrylate) microgels

Novel monodisperse cationic pH-responsive microgels were successfully prepared by dispersion polymerization in ethanol/water mixture using N,N'-dimethylamino ethyl methacrylate (DMAEMA) as the monomer, poly(vinyl pyrrolidone) (PVP) as the steric stabilizer and N,N'-methylenebisacrylamide (MBA) as the cross-linker. The effects of various polymerization parameters, such as medium polarity, concentration of cross-linker, concentration of monomer, and concentration and molecular weight of stabilizer on the final diameter and monodispersity of poly(N,N'-dimethylamino ethyl methacrylate) (PDMAEMA) microgels were systematically studied. The pH-responsive characteristics of PDMAEMA microgels were also investigated. The experimental results showed that these microgels exhibited excellent pH-responsivity and significantly swelled at low pH values. The maximum ratio of volume change of the prepared microgels in response to pH variation was more than 11 times. It was found that the prepared microgels completely aggregated at the isoelectric point (IEP) around pH 6. On the other hand, the microgels were stable in aqueous solution at both low and high pH values. The results can be used for effectively controlled separation of particles.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Photo- and thermally stimulated luminescence of polyminerals extracted from herbs and spices

Ionizing radiation processing is a widely employed method for preservative treatment of foodstuffs. Usually it is possible to detect irradiated herbs and spices by resorting to luminescence techniques, in particular photo- and thermostimulated luminescence. For these techniques to be useful, it is necessary to characterize the response to radiation of each particular herb or spice. In this work, the thermoluminescence (TL) and photostimulated luminescence (PSL) properties of inorganic polymineral fractions extracted from commercial herbs and spices previously irradiated for disinfestation purposes have been analyzed. Samples of mint, cinnamon, chamomile, paprika, black pepper, coriander and Jamaica flower were irradiated from 50 to 400 Gy by using a beta source. The X-ray diffraction (XRD) analysis has shown that the mineral fractions consist mainly of quartz and feldspars. The PSL and TL response as a function of the absorbed dose, and their fading at room temperature have been determined. The TL glow curves have been deconvolved in order to obtain characteristic kinetics parameters in each case. The results of this work show that PSL and TL are reliable techniques for detection and analysis of irradiated foodstuffs.     

Study of pH-responsive microgels containing methacrylic acid: effects of particle composition and added calcium

pH-responsive microgel dispersions contain cross-linked polymer particles that swell when the pH approaches the pKa of the ionic monomer incorporated within the particles. In recent work from our group, it was demonstrated that the mechanical properties of degenerated intervertebral discs (IVDs) could be restored to normal values by injection of pH-responsive microgel dispersions (Saunders, J. M.; Tong, T.; LeMaitre, C.; Freemont, A. J.; Saunders, B. R. Soft Matter 2007, 3, 486). These dispersions change from a fluid to a gel with increasing pH. The present work investigates the pH-dependent properties of dispersions of microgel particles containing MAA (methacrylic acid) and also the effects of added Ca2+. Two microgels are discussed: microgel A is poly(EA/MAA/AM) (EA and AM are ethyl acrylate and allyl methacrylate), and microgel B is poly(EA/MAA/BDDA) (butanediol diacrylate). The pH-dependent particle properties investigated include hydrodynamic diameters and electrophoretic mobilities. The critical coagulation concentrations (CCC) of dilute dispersions and the elastic modulus (G') of concentrated, gelled microgel dispersions were also investigated. In the absence of added Ca2+, the particle swelling and G' were smallest and largest, respectively, for microgel A. The changes in hydrodynamic diameter and mobility with pH were explained in terms of a core-shell swelling mechanism. Added Ca2+ was found to significantly decrease the CCCs, extents of particle swelling, and magnitude of the electrophoretic mobility. This was attributed to the ionic cross-linking of neighboring RCOO- groups by Ca2+. It is suggested that the formation of ionic cross-links is inefficient within the microgel particles because of the presence of covalent cross-links that oppose the large-scale conformational rearrangement of neighboring RCOO- groups. The effect of Ca2+ on the properties of the gelled dispersions is important from the viewpoint of potential application in vivo. Rheological studies of the gelled microgel dispersions showed that added Ca2+ did not have a specific influence on G'. The differences observed in the presence of Ca2+ were attributed to ionic strength effects (screening). The key parameter that controls G' of the gelled microgel dispersions is pH. The results from this work suggest that the elasticity of the gels would be slightly reduced in vivo as a consequence of the high ionic strength present.     

Efficient synthesis of sterically stabilized pH-responsive microgels of controllable particle diameter by emulsion polymerization

Emulsion polymerization of 2-vinylpyridine (2VP) in the presence of divinylbenzene (DVB) cross-linker, a cationic surfactant, and a hydrophilic macromonomer, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), at around neutral pH and 60 degrees C afforded near-monodisperse, sterically stabilized latexes at approximately 10% solids. Judicious selection of the synthesis parameters enabled the mean latex diameter to be varied over an unusually wide range for one-shot batch syntheses. Scanning electron microscopy studies confirmed near-monodisperse spherical morphologies, with mean weight-average particle diameters ranging from 370 to 970 nm depending on the initiator, polymeric stabilizer, and surfactant concentrations. Particle sizing studies were also conducted using disk centrifuge photosedimentometry and dynamic light scattering and gave similar data. These lightly cross-linked latexes acquired cationic microgel character at low pH, as expected. The critical pH for this latex-to-microgel transition was around pH 4.1 at 1.0 wt % DVB, which is significantly lower than the pKa of 4.92 estimated for linear P2VP homopolymer by acid titration. 1H NMR and aqueous electrophoresis studies indicated that substantial swelling occurred at low pH due to protonation of the 2VP groups, while dynamic light scattering (DLS) studies indicated volumetric swelling ratios of up to 3 orders of magnitude, depending on the initial latex diameter. Systematic variation of the degree of cross-linking led to a monotonic decrease in the pKa values of the P2VP latexes (as judged by acid titration) and also the critical swelling pH (as judged by visual inspection). This was attributed to the increasingly branched nature of the P2VP chains in their swollen microgel form. Preliminary studies of the kinetics of acid-induced swelling were also conducted using the pH jump method in conjunction with a stopped-flow apparatus. These P2VP latexes swell significantly faster than P2VP latexes described in the literature and the characteristic time scales observed in the present study are much closer to those predicted by the Tanaka equation.     

Synthesis of polyampholyte microgels from colloidal salts of pectinic acid and their application as pH-responsive emulsifiers

A novel method for obtaining cross-linked microgels of apple pectin has been introduced. This method is based on the Ugi four-component condensation in colloidal suspensions of pectinic acid and amines. Using various processing parameters (the polysaccharide concentration, the type and density of crosslink, and the optimal pH range), particles with controlled colloidal properties have been obtained. Lightly cross-linked polysaccharide chains acquire anionic character due to deprotonation of the carboxyl groups at pH?9–10. Increasing the degree of cross-linking leads to a polyampholyte microgel, which can be protonated in acidic medium or deprotonated in basic medium. Polyampholyte microgels derived from apple pectin have proved to be an effective Pickering emulsifier at low concentrations and pH?2–3, forming stable oil-in-water emulsions. These Pickering emulsions exhibited pH-responsive behavior: raising the solution pH to 10 resulted in immediate demulsification due to the destabilization of microgel network at the oil–water interface.     

Photo- and thermochromic spirans

The mechanisms of the valence isomerization of 2H-pyrans and chromene were calculated by means of the MINDO/3 method. A correlation between the magnitude of the barrier of activation of the electrocyclic reaction and the differences in the energies of the bonds of the tautomeric forms was noted. A simple scheme that makes it possible to estimate the magnitude of the activation barrier of the thermochromic transformations of spiropyrans on the basis of quantum-chemical calculations by the Pariser-Parr-Pople (PPP) method is proposed.See [1] for Communication 16.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 172–177, February, 1988.The authors thank V. A. Lokshin and N. A. Voloshin for providing us with data on the barriers of thermochromic transformations of spiropyrans.     

Effect of chemical composition on properties of pH-responsive poly(acrylamide-co-acrylic acid) microgels prepared by inverse microemulsion polymerization

In this research, a series of pH-responsive microgels based on acrylamide (AM), acrylic acid (AA) as the main monomers, and N,N′-methylenebisacrylamide as a divinyl cross-linking agent, have been prepared by inverse microemulsion polymerization. The effect of chemical composition of poly(acrylamide-co-acrylic acid) (P(AM-co-AA)) on hydrodynamic diameters, morphology, swelling ratios and pH-responsive behaviour and thermal properties of microgels were discussed. With an increase of the mole percentages of AA in the feed ratio, the microgels have higher swelling ratios. The TEM photographs show that the spherical morphology of the microgels are regular relatively. Comparing with PAM microgels, number-average diameters of P(AM-co-AA) microgels were larger because of the presence of AA chain segment in the polymer chain. Turbidities of microgels determined through UV–vis spectrophotometer indicate that the microgels exhibit favourable pH-responsive behaviour, and responsive pH value is related to the dissociation constant of AA. Moreover, thermal stable properties of microgels were confirmed by differential scanning calorimeter. It was observed that an increase in the mole percentages of AA in the feed ratio provided lower glass transition temperature and thermal decomposition temperature of pH-responsive microgels.     

Photo-, solvent-, and ion-controlled multichromism of imidazolium-substituted diarylethenes

Cationic diarylethenes with an imidazolium ring are synthesized for the first time. The imidazolium cationic moiety is connected directly to the ethene unit as one of the aryl units that take part in the photoinduced pericyclization reaction. The imidazolium-substituted diarylethenes undergo reversible photochromic reactions in a variety of organic media, including ionic liquids, even though they have a delocalized cationic charge in one of the five-membered aromatic rings. The closed-ring isomer shows solvatochromism depending on the solvent donor numbers. Addition of some tetraalkylammonium salts, such as tetrabutyl ammonium nitrate, into the colored organic solution of diarylethene also causes a color change, indicating its ionochromic property. These solvato- and ionochromic properties are considered in connection with the shift of chemical equilibrium between the closed-ring isomers, one with an extended pi-conjugation system and one with limited pi-conjugation due to the strong interaction with solvent molecules and anions with high donor number.     

Photo- and thermochromic spirans

New spiropyrans with -acceptor azomethine and ketovinyl substituents in the 8 position were synthesized using the functional possibilities of the carbonyl group. The structures of the compounds obtained and their photochromic properties in 2-propanol at –70°C were studied.For Communication 17 see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 176–179, February, 1993.     

Photo- and thermally induced coloration of a crystalline MOF accompanying electron transfer and long-lived charge separation in a stable host-guest system

A new type of electron transfer (ET) system was built via the combination of a highly stable MOF host framework and methyl viologen guest molecule. The π-stacking arrangements adjust the distance between the D-A components, contributing to the formation of an ultra long-lived charge separated state in the photo/thermo dual stimuli-responsive complex.     

Crystallization behavior of soft, attractive microgels

The equilibrium phase behavior and the dynamics of colloidal assemblies composed of soft, spherical, colloidal particles with attractive pair potentials have been studied by digital video microscopy. The particles were synthesized by precipitation copolymerization of N-isopropylacrylamide (NIPAm), acrylic acid (AAc), and N,N'-methylene bis(acrylamide) (BIS), yielding highly water swollen hydrogel microparticles (microgels) with temperature- and pH-tunable swelling properties. It is observed that in a pH = 3.0 buffer with an ionic strength of 10 mM, assemblies of pNIPAm-AAc microgels crystallize due to a delicate balance between weak attractive and soft repulsive forces. The attractive interactions are further confirmed by measurements of the crystal melting temperatures. As the temperature of colloidal crystals is increased, the crystalline phase does not melt until the temperature is far above the lower critical solution temperature (LCST) of the microgels, in stark contrast to what is typically observed for phases formed due to purely repulsive interactions. The unusual thermal stability of pNIPAm-AAc colloidal crystals demonstrates an enthalpic origin of crystallization for these microgels.     

PNIPAM-co-polystyrene core-shell microgels: structure, swelling behavior, and crystallization

The present contribution presents the single-step preparation and characterization of poly(N-isopropyl acrylamide)-co-polystyrene core-shell microgels with varying polystyrene content. The swelling behavior of the particles is investigated using dynamic light scattering and differs significantly from the swelling behavior of poly(N-isopropyl acrylamide) homopolymer particles. The lower critical solution temperature is found to be shifted to lower temperatures upon increasing the polystyrene content of the particles. The core-shell structure of the particles is revealed by means of small angle neutron scattering (SANS) using the method of contrast variation. Additionally, the formation of mesoscopic crystals of these particles is investigated by means of scanning electron microscopy and also by SANS. The particles seem to have preferable properties with respect to crystallization compared to homopolymer microgels.