General synthesis of I-III-VI2 ternary semiconductor nanocrystals

Metastable orthorhombic phase of AgInS2 nanocrystals with various shapes, including particles, rods, and worms, have been obtained to demonstrate a facile and effective one-pot chemical route for the synthesis of high quality I-III-VI2 ternary semiconductor nanocrystals (AgInS2, CuInS2, AgInSe2) with controllable shape and size.     

Size-controlled chalcopyrite CuInS2 nanocrystals: One-pot synthesis and optical characterization

Chalcopyrite ternary CuInS2 semiconductor nanocrystals have been synthesized via a facile one-pot chemical approach by using oleylamine and oleic acid as solvents.The as-prepared CuInS2 nanocrystals have been characterized by instrumental analyses such as X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM)/high-resolution TEM(HRTEM),energy-dispersive X-ray spectroscopy(EDS),UV-vis absorption spectroscopy(UV-vis) and photoluminescence(PL) spectroscopy.The particle sizes of the CuInS2 nanocrystals could be tuned from 2 to 10 nm by simply varying reaction conditions.Oleylamine,which acted as both a reductant and an effective capping agent,plays an important role in the size-controlled synthesis of CuInS2 nanocrystals.Based on a series of comparative experiments under different reaction conditions,the probable formation mechanism of CuInS2 nanocrystals has been proposed.Furthermore,the UV-vis absorption and PL emission spectra of the chalcopyrite CuInS2 nanocrystals have been found to be adjustable in the range of 527-815 nm and 625-800 nm,respectively,indicating their potential application in photovoltaic devices.     

One-pot synthesis of new-phase AgInSe2 nanorods

AgInSe2 nanorods with a previously unknown orthorhombic phase isostructural to AgInS2 have been prepared by the thermolysis of [(PPh3)2AgIn(SeC{O}Ph)4] in a mixture of oleylamine (OA) and dodecanethiol (DT) at 185 degrees C. A systematic study indicates that the ratio of surfactants is crucial for obtaining both monodispersed nanorods and the new orthorhombic phase AgInSe2. The AgInSe2 nanorods have been characterized by TEM, XRPD, EDX, and XPS.     

Facile synthesis of ZnS-AgInS2 solid solution nanoparticles for a color-adjustable luminophore

Nanoparticles of ZnS-AgInS2 solid solution (ZAIS) were synthesized by the thermal decomposition of (AgIn)xZn2(1-x)(S2CN(C2H5)2)4 precursors in a hot oleylamine solution. X-ray powder diffraction analyses revealed that the resulting nanoparticle powders were not a mixture of ZnS and AgInS2 but a ZnS-AgInS2 solid solution in which the fraction of ZnS was enlarged with a decrease in the value of x, that is, an increase in the content of Zn2+ in the precursors used. The energy gap of ZAIS nanoparticles could be controlled by the composition of solid solution. Intense emission was observed at room temperature, regardless of the kind of the particles, the peak wavelength of PL being blue-shifted from 720 to 540 nm with a decrease in the value of x. The highest quantum yield of ca. 24% was obtained for nanoparticles prepared with x = 0.86, which was much higher than the quantum yields reported for I-III-VI2-based semiconductor nanoparticles, such as CuInS2 and ZnS-CuInS2 solid solution.     

Solvothermal synthesis of zincblende and wurtzite CuInS2 nanocrystals and their photovoltaic application

We report a simple solvothermal synthesis approach to the growth of CuInS(2) nanocrystals with zincblende- and wurtzite-phase structures. Zincblende nanocrystals with particle sizes of 10-20 nm were produced using oleylamine as the solvent. When ethylenediamine was used as the solvent, similarly sized wurtzite nanocrystals with some degree of particle aggregation were formed. Use of a mixture of these solvents gave products with mixed phases including some polyhedral nanostructures. The crystal phases of these nanocrystals were carefully determined by X-ray diffraction and transmission electron microscopy analysis. All the samples exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1300 nm. Pure-phase zincblende and wurtzite CuInS(2) nanocrystals were employed as ink in the fabrication of solar cells. The spray-coated nanocrystal layer was subjected to a selenization process. A power conversion efficiency of ~0.74% and a good external quantum efficiency profile over broad wavelengths have been measured. The results demonstrate that wurtzite and zincblende CuInS(2) nanocrystals may be attractive precursors to light-absorbing materials for making efficient photovoltaic devices.     

One-pot synthesis and third-order nonlinear optical properties of AgInS2 nanocrystals

Good quality colloidal nanocrystals of metastable orthorhombic phase of AgInS2 obtained by decomposing the single-precursor [(Ph3P)2AgIn(SCOPh)4] in a mixture of dodecanethiol and oleic acid at 125-200 degrees C, exhibit significant third order non-linear optical properties.     

A simple solution route to single-crystalline Sb2O3 nanowires with rectangular cross sections

We report a simple solution route to large-scale synthesis of uniform, single-crystalline, and well-faceted orthorhombic antimony trioxide (Sb(2)O(3)) nanowires with rectangular cross sections by direct air oxidation of bulk metal antimony (Sb) in a mixed solution made of ethylenediamine (EDA) and deionized water (DIW). The as-synthesized products were analyzed by range of methods, such as XRD, SEM, EDX, TEM, SAED, HRTEM, FTIR, Raman, UV-vis absorption, and photoluminescence (PL) spectra. The as-synthesized Sb(2)O(3) nanowires with rectangular cross sections are usually hundreds of micrometers in length, typically 80-100 nm in width, and 60-80 nm in thickness. The novel room temperature photoluminescence properties of Sb(2)O(3) nanowires with rectangular cross sections displayed a significant UV luminescence with a strong emission band at 374 nm, which was reported for the first time, indicating the as-synthesized products with an optical band gap E(g) = 3.3 eV. It is expected that as-synthesized Sb(2)O(3) nanowires would be a new member of functional materials and used in the manufacture of advanced nanodevices.     

Facile thermolysis synthesis of CuInS2 nanocrystals with tunable anisotropic shape and structure

Monodisperse CuInS(2) nanocrystals are produced by injecting mixed metal-oleate precursors into hot organic solvents containing the dissolved sulphur sources. A better understanding of the formation mechanism of CuInS(2) has enabled us to tailor anisotropic shapes in the form of triangular-pyramid, circular cone, and bullet-like rods with tunable crystal phases by varying the synthetic conditions.     

Studies on optical absorption and photoluminescence of thioglycerol-stabilized CdS quantum dots

Nanoparticles of CdS were prepared at 303 K by aqueous precipitation method using CdSO4 and (NH4)2S in presence of the stabilizing agent thioglycerol. Adjustment of the thioglycerol (T) to ammonium sulphide (A) ratio (T:A) from 1:25 to 1:3.3 was done during synthesis and nanoparticles of different size were obtained. The prepared colloids were characterized by UV-vis and photoluminescence (PL) spectroscopic studies. Prominent first and second excitonic transitions are observed in the UV-vis spectrum of the colloid prepared with a T:A ratio of 1:3.3. Particle size analysis was done using XRD, high resolution TEM and dynamic light scattering and found to be approximately 3 nm. UV-vis and PL spectral features also agree with this particle size in colloid with T:A of 1:3.3. The band gap of CdS quantum dots has increased from the bulk value 2.4-2.9 eV. PL spectra show quantum size effect and the peak is shifted from 628 to 556 nm when the ratio of T:A was changed from 1:25 to 1:3.3. Doping of CdS with Zn2+ and Cu2+ is found to enhance the PL intensity. PL band shows blue-shift and red-shift on doping with Zn2+ and Cu2+, respectively. UV and PL spectral features of the CdS/Au hybrid nanoparticles obtained by a physical mixing of CdS and Au nanoclusters in various volume ratios is also discussed. Au red-shifts and rapidly quenches the PL of CdS. An additional low energy band approximately 650 nm is observed in the UV visible spectrum of the hybrid nanoparticles.     

Development of one-dimensional nanostructures through the crystallization of amorphous colloids

In this paper we have demonstrated that the crystallization method of amorphous colloids is convenient and feasible in the large-scale production of one-dimensional (1D) nanostructures. For the crystals with highly anisotropic structures, such as orthorhombic, trigonal, and hexagonal crystals, the crystallization generally tends to occur along the (001) axis. The preparation of orthorhombic bismuth sulfide (Bi2S3) nanorods and trigonal selenium ( t-Se) nanowires by the crystallization route was used as typical examples to illustrate the process and mechanism of crystallization. The as-prepared products were characterized with transmission electron microscopy, field-emission scanning electron microscopy, X-ray diffraction, and selected area electron diffraction. Additionally, the detailed crystal growth processes involved in the crystallization of amorphous Bi2S3 colloid were investigated by studying the morphology and structure of intermediates. It demonstrates that the growth of the nanorods is through two key steps: (1) the formation of multiple activated sites on the surface of spherical Bi2S3 colloid and (2) the subsequent preferential growth along these sites.     

掺杂CuInS2纳米晶玻璃的三阶非线性光学性质

采用溶胶-凝胶法结合气氛控制制备了CuInS2纳米晶玻璃. 利用X射线粉末衍射仪(XRD)和透射电子显微镜(TEM)对CuInS2纳米晶在玻璃中的形貌和微结构进行了表征, 并利用飞秒Z扫描技术对该玻璃的三阶非线性光学性质进行了研究. 结果表明, 在钠硼硅玻璃中形成了尺寸分布为10 nm左右的均一的CuInS2四方晶系纳米晶. 该玻璃体现出优良的三阶非线性光学性能, 其三阶非线性光学折射率γ、吸收系数β和极化率χ(3)分别为8.57×10-16 m2/W, 3.74×10-8 m/W和1.95×10-17 m2/V2.     

Freezing of parallel hard cubes with rounded edges

The freezing transition in a classical three-dimensional system of rounded hard cubes with fixed, equal orientations is studied by computer simulation and fundamental-measure density functional theory. By switching the rounding parameter s from zero to one, one can smoothly interpolate between cubes with sharp edges and hard spheres. The equilibrium phase diagram of rounded parallel hard cubes is computed as a function of their volume fraction and the rounding parameter s. The second order freezing transition known for oriented cubes at s = 0 is found to be persistent up to s = 0.65. The fluid freezes into a simple-cubic crystal which exhibits a large vacancy concentration. Upon a further increase of s, the continuous freezing is replaced by a first-order transition into either a sheared simple cubic lattice or a deformed face-centered cubic lattice with two possible unit cells: body-centered orthorhombic or base-centered monoclinic. In principle, a system of parallel cubes could be realized in experiments on colloids using advanced synthesis techniques and a combination of external fields.     

Size-selected synthesis of PtRu nano-catalysts: reaction and size control mechanism

A rapid synthesis method for the preparation of PtRu colloids and their subsequent deposition on high surface area carbons is presented. The reaction mechanism is shown to involve the oxidation of the solvent, ethylene glycol, to mainly glycolic acid or, depending on the pH, its anion, glycolate, while the Pt(+IV) and Ru(+III) precursor salts are reduced. Glycolate acts as a stabilizer for the PtRu colloids and the glycolate concentration, and hence the size of the resulting noble metal colloids is controlled via the pH of the synthesis solution. Carbon-supported PtRu catalysts of controlled size can be prepared within the range of 0.7-4 nm. Slow scan X-ray diffraction and high-resolution transmission electron microscopy show the PtRu catalysts to be crystalline. The Ru is partly dissolved in the face-centered cubic Pt lattice, but the catalysts also consist of a separate, hexagonal Ru phase. The PtRu catalysts appear to be of the same composition independent of the catalyst size in the range of 1.2-4 nm. Particular PtRu catalysts prepared in this work display enhanced activities for the CH(3)OH electro-oxidation reaction when compared to two commercial catalysts.     

Large-scale synthesis of tungsten oxide nanofibers by electrospinning

We show in this communication that large-scale synthesis of orthorhombic WO3 nanofibers can be obtained via a simple electrospinning method. The morphology and the crystal structure are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), FTIR, X-ray diffraction patterns (XRD) and X-ray photoelectron spectra (XPS) spectra. SEM and TEM images showed that the diameter of the obtained WO3 nanofibers is between 100 and 500 nm. The structure of the obtained WO3 nanofibers was characterized by FTIR, XRD, and XPS spectra. The photoluminescence of the obtained WO3 nanofibers were also investigated.     

Shape-controlled synthesis of ternary chalcogenide ZnIn2S4 and CuIn(S,Se)2 nano-/microstructures via facile solution route

We demonstrated in this paper the shape-controlled synthesis of ZnIn2S4, CuInS2, and CuInSe2 nano- and microstructures through a facile solution-based route. One-dimensional ZnIn2S4 nanotubes and nanoribbons were synthesized by a solvothermal method with pyridine as the solvent, while ZnIn2S4 solid or hollow microspheres were hydrothermally prepared in the presence of a surfactant such as cetyltrimethylammonium bromide (CTAB) or poly(ethylene glycol) (PEG). The mechanisms related to the phase formation and morphology control of ZnIn2S4 are proposed and discussed. The UV-vis absorption spectra show that the as-prepared nano- and micromaterials have strong absorption in a wide range from UV to visible light and that their band gaps are somewhat relevant to the size and morphology. The photoluminescence measurements of the ZnIn2S4 microspheres at room temperature reveal intense excitation at approximately 575 nm and red emission at approximately 784 nm. Furthermore, CuInS2 and CuInSe2 with different morphologies such as spheres, platelets, rods, and fishbone-like shapes were also obtained by similar hydrothermal and solvothermal synthesis.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

有机杂化含Te2^2-／Se3^2-过渡金属化合物的溶剂热合成及晶体结构

本文通过溶剂热法合成了2种新的有机杂化锌碲化物[Zn(dien)2](Te2)(1)和镍硒化物[Ni(dien)2](Se3)(2)(dien=二乙烯三胺),单晶X射线衍射分析结果表明,化合物1属于正交晶系,Cmca空间群,晶胞参数:a=9.212(2),b=10.854(3),c=15.723(4),Z=4。化合物2属于正交晶系,Pna21空间群,晶胞参数:a=18.047(4),b=9.8236(19),c=9.0079(19),Z=4。在两种化合物中,1的阳离子中Zn2 与2个dien螯合形成稍变形的八面体几何构型,阴离子为哑铃型的Te22-。2的阳离子中Ni2 离子与2个dien螯合形成稍变形的八面体几何构型,阴离子为‘V’字型的Se32-。     

Controlled synthesis of monodispersed AgGaS2 3D nanoflowers and the shape evolution from nanoflowers to colloids

Monodispersed AgGaS₂ three-dimensional (3D) nanoflowers have been successfully synthesized in a “soft-chemical” system with the mixture of 1-octyl alcohol and cyclohexane as reaction medium and oleylamine as surfactant. The crystal phase, morphology and chemical composition of the as-prepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution TEM (HTEM), respectively. Results reveal that the as-synthesized AgGaS₂ nanoflowers are in tetragonal structure with 3D flower-like shape. Controlled experiments demonstrated that the shape transformation of AgGaS₂ nanocrystals from 3D nanoflowers (50 nm) to nanoparticles (10-20 nm) could be readily realized by tuning the reaction parameters, e.g., the ratio of octanol to cyclohexane, the length of carbon chain of fatty alcohol, the concentration of oleylamine, etc. The UV-vis and PL spectra of the obtained AgGaS₂ nanoflowers and colloids were researched. In addition, the photoelectron energy conversion (SPV) of AgGaS₂ nanoflowers was further researched by the surface photovoltage spectra.     

Crystal formation and growth during the hydrothermal synthesis of beta-Ni(OH)2 in one-dimensional nano space

Hydrothermal synthesis of beta-Ni(OH)(2) was performed inside uniform carbon-coated nanochannels of an anodic aluminium oxide film. The time course of crystal formation and growth of Ni(OH)(2) in such one-dimensional nano space was observed using transmission electron microscopy (TEM), and the changes in the number and size of crystals with the hydrothermal reaction period were quantitatively analyzed using the TEM images. Moreover, the effect of the channel size (25, 100 and 300 nm in diameter) on the crystal growth was examined. In the early stage of the reaction, the crystal formation and growth of beta-Ni(OH)(2) in the one-dimensional channels took place in the same manner as in conventional hydrothermal synthesis. However, except for the 300 nm-channels, further crystal growth was hampered by the spatial restriction, and it allowed only the growth toward the channel axis. In the case of the 25 nm-channels, many Ni(OH)(2) crystals of less than 40 nm formed initially, but slowly disappeared except for a few that grew larger at the expense of the small crystals. This finding clearly indicates that the crystal growth of Ni(OH)(2) during the whole hydrothermal process was governed by the Ostwald ripening. With this mechanism and the spatial restriction, single crystals of beta-Ni(OH)(2) nanorods with a length of over 150 nm were finally formed.     

Aerosol-assisted synthesis of mesoporous titania nanoparticles with high surface area and controllable phase composition

Mesoporous titania nanoparticles (denoted as MTN) with high surface area (e.g., 252 m² g⁻¹) were prepared using tetrapropyl orthotitanate (TPOT) as a titania precursor and 10–20 nm or 20–30 nm silica colloids as templates. Co-assembly of TPOT and silica colloids in an aerosol-assisted process and immediate calcination at 450 °C resulted in anatase/silica composite nanoparticles. Subsequent removal of the silica colloids from the composite by NaOH solution created mesopores in the TiO₂ nanoparticles with pore size corresponding to that of silica colloids. Effects of silica colloids’ contents on MTN porosity and crystallites’ growth at a higher calcination temperature (e.g., 1000 °C) were investigated. Silica colloids suppressed the growth of TiO₂ crystallites during calcination at a higher calcination temperature and controllable contents of the silica colloids in precursor solution resulted in various atomic ratios of anatase to rutile in the calcinated materials. The mesostructure and crystalline structure of these titania materials were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), differential thermal analysis (DTA)-thermo-gravimetric analysis (TGA), and N₂ sorption.