Synthesis and characterization of bio-based epoxy blends from renewable resource based epoxidized soybean oil as reactive diluent

A novel bioresin, epoxidized soybean oil was synthesized by in situ method and was characterized employing FTIR and NMR. The bioresin was blended with epoxy(DGEBA) at different ratios as reactive diluents for improved processibility and toughened nature. The composition with 20 wt% bioresin exhibited improved impact strength to the tune of 60% as compared to virgin epoxy. Fracture toughness parameters critical stress intensity factor(KIC) and critical strain energy release rate(GIC) were evaluated using single edge notch bending test and demonstrated superior enhancement in toughness. Dynamic mechanical, thermal, thermo mechanical and fracture morphological analyses have been studied for bio-based epoxy blends. Curing kinetics has been evaluated through DSC analysis to investigate the effect of bioresin on cross-linking reaction of neat epoxy with triethylenetetramine as curing agent.     

Reactive processing of syndiotactic polystyrene with an epoxy/amine solvent system

Syndiotactic polystyrene (sPS) is a new semi-crystalline thermoplastic which is believed to fill the price-performance gap between engineering and commodity plastics. In order to reduce the high processing temperature of sPS (>290°C), an epoxy-amine model system was used as a reactive solvent. Such a processing aid can be used to achieve a 50 to 500 fold lowering of the melt viscosity. When initially homogeneous solutions of sPS in a stoechiometric epoxy-amine mixture are thermally cured, Reaction Induced Phase Separation (RIPS) takes place, leading to phase separated thermoplastic-thermoset polymer blends. We focus our study on low (wt% sPS < 20%) and high concentration blends (wt% sPS > 60%) prepared by two processing techniques (mechanical stirring in a laboratory reactor or internal mixer/ reactive extrusion respectively). These blends have different potential interests. Low concentration blends (sPS domains in an epoxy-amine matrix) are prepared to create new, tunable blend morphologies by choosing the nature of the phase separation process, i.e. either crystallisation followed by polymerization or polymerization followed crystallisation. High concentration blends (sPS matrix containing dispersed epoxy-amine particles after RIPS) are prepared to facilitate the extrusion of sPS. In this case, the epoxy amine model system served as a reactive solvent. The time to the onset of RIPS is in the order of 7-9 min for low concentration blends, while it increases to 20-45 min for high concentration samples, as the reaction rates are substantially slowed down due to lower epoxy and amine concentrations. During the curing reaction the melting temperature of sPS in the reactive solvent mixture evolves back from a depressed value to the level of pure sPS. This indicates a change in the composition of the sPS phase, caused by (complete) phase separation upon reaction. We conclude that our epoxy amine system is suited for reactive processing of sPS, where final properties depend strongly on composition and processing conditions.     

Cure Kinetics of Poly(acrylonitrile-butadiene-styrene) Modified Epoxy–Amine System

The cure kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA) modified with different amounts of poly(acrylonitrile-butadiene-styrene) (ABS) and cured with 4,4′-diaminodiphenylsulfone (DDS) was investigated by employing differential scanning calorimetry (DSC). The curing reaction was followed by using an isothermal approach over the temperature range 150–180°C. The amount of ABS in the blends was 3.6, 6.9, 10 and 12.9 wt%. Blending of ABS in the epoxy monomer did not change the reaction mechanism of the epoxy network formation, but the reaction rate seems to be decreased with the addition of the thermoplastic. A phenomenological kinetic model was used for kinetic analysis. Activation energies and kinetic parameters were determined by fitting the kinetic model with experimental data. Diffusion control was incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The reaction rates for the epoxy blends were found to be lower than that of the neat epoxy. The reaction rates decreased when the ABS contents was increased, due to the dilution effect caused by the ABS on the epoxy/amine reaction mixture.     

环氧树脂共混物相结构的调控方法研究

研究了环氧树脂(E51)/聚砜(PSF)共混物相结构的控制方法.通过抑制相分离、控制预固化的反应程度控制环氧树脂的分子量,固化后可获得不同的共混物相结构.依据红外测定的固化反应程度设定固化程序,可有效控制共混物的相结构.加入促进剂三氟化硼-乙基胺(BTF-EA)可提高固化反应速度,使相分离结构在早期被抑制,以获得小微区的相结构.     

Insights into phthalonitrile/epoxy blends modification system from non-competitive cure system based on alicyclic anhydride

A series of polymer blends were prepared from 1,3-bis(3,4-dicyanophenoxy)benzene (3BOCN) and epoxy resin with methyl tetrahydrophthalic anhydride as curing agent.The curing behavior and curing kinetics of the blends were studied by differential scanning calorimetry.The apparent activation energy of the blends with various contents of 3BOCN was higher than that of the blends without 3BOCN.A model experiment suggested that there is no obvious reaction between phthalonitrile and epoxy.The thermal and mechanical properties of the polymer blends were evaluated.The polymer blends exhibit high storage modulus and char yield compared with the neat epoxy.The polymer blends show ductile fracture morphology by scanning electron microscopy (SEM) images.     

Preparation of hybrid microcapsules and application to self‐healing agent

It was tried to prepare hybrid microcapsules composed of porous inorganic particles and epoxy resin shell and to apply to the self‐healing agent. A water soluble imidazole of gelation promoting agent as the core material was microencapsulated in the porous inorganic particles, which were coated with epoxy resin. The porous inorganic particles were prepared with the interfacial reaction between sodium silicate and calcium ion in the (W/O) dispersion. In the experiment, the concentration of sodium silicate and the mixing speed to form the (W/O) dispersion were mainly changed. The porous inorganic particles were immersed in the aqueous solution dissolving imidazole and then, added in the corn oil dissolving epoxy resin to be microencapsulated with gelated epoxy resin. The hybrid microcapsules containing imidazole with the mean diameters from 200 to 400 µm were able to be prepared and to induce the gelation reaction of epoxy resin by breaking the hybrid microcapsule shell due to heating. Copyright © 2013 John Wiley & Sons, Ltd.     

环氧树脂/聚砜共混体系相结构的调控研究——环氧预聚物分子量的影响

研究了不同分子量的环氧预聚物对双酚A型双官能团环氧树脂 /聚砜 (PSF) /固化剂 (二氨基二苯基砜 ,DDS)体系相分离结构的影响 .通过红外光谱 (FTIR)和动态热机械分析 (TMA)对反应转化率、玻璃化温度以及固化温度的关系的研究 ,表明环氧预聚物分子量较小时 ,凝胶点和玻璃化是影响相结构的关键因素 ;环氧分子量较大时 ,环氧扩链后粘度的变化则成为抑制相分离的重要因素 .电子显微镜 (SEM)结果表明改变环氧预聚物分子量可以达到调控相结构的目的 ,随着预聚物分子量的增大 ,体系的微区尺寸减小 .     

热塑性聚醚酰亚胺改性四官能度环氧树脂的相分离研究──固化剂用量的影响

以DSC、TRLS和SEM等方法研究了固化剂DDS用量对苯端基聚醚酰亚胺(P-PEI)改性4,4'-二氨基二苯甲烷四缩水甘油环氧树脂(TGDDM)体系的固化速率及相结构的影响.结果表明,20phrP-PEI改性环氧体系在150℃固化时,随DDS量增加,固化反应速率增大,相分离时间提前,形成了不同的相结构,解释了DDS量对粘接剪切强度的影响.     

Kinetic studies of the effect of ABS on the curing of an epoxy/cycloaliphatic amine resin

Using differential scanning calorimetry (DSC), we have studied, under isothermal and dynamic conditions, the kinetics of the cure reaction for an epoxy resin based on the diglycidyl ether of bisphenol A (DGEBA) modified with different contents of acrylonitrile–butadiene–styrene (ABS) and cured with 1,3‐bisaminomethylcyclohexane (1,3‐BAC). Kinetic analysis were performed using three kinetic models: Kissinger, Flynn–Wall–Ozawa, and the phenomenological model of Kamal as a result of its autocatalytic behavior. Diffusion control is incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The total heats of reaction were not influenced by the presence of ABS. The autocatalytic mechanism was observed both in the neat system as well as in its blends. The reaction rates of the blends and the maximum conversions reached did not change too much with the ABS content. Blending ABS within the epoxy resin does not change the reaction mechanism of the epoxy resin formation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 351–361, 2000     

Miscibility and cure kinetics studies on blends of bisphenol-A polycarbonate and tetraglycidyl-4,4′-diaminodiphenylmethane epoxy cured with an amine

Differential scanning calorimetry (DSC) has been applied to characterize the glass transition behavior of the blends formed by bisphenol-A polycarbonate (PC) with a tetrafunctional epoxy (tetraglycidyl-4,4′-diaminodiphenyl methane, TGDDM) cured with 4,4′-diaminodiphenylsulphone (DDS). A rare miscibility in the complete composition range has been demonstrated in these blends. Additionally, the blend morphology was examined using scanning electron microscopy (SEM) and a homogeneous single-phase PC/epoxy network has been observed in the blends of all compositions. Moreover, polycarbonate incorporation has been found to exert a distinct effect on the cure behavior of the epoxy blends. The cure reaction rates for the epoxy-PC blends were significantly higher due to the presence of PC. In addition, the cure mechanism of the epoxy blends was no longer autocatalytic. An n-th order reaction mechanism with n = 1.2 to 1.5 has been observed for the blends of DDS-cured epoxy with PC of various compositions studied using DSC. The proposed n-th order kinetic model has been found to describe well the cure behavior of the epoxy/PC blends up to the vitrification point. © 1995 John Wiley & Sons, Inc.     

PVC／PE交联共混体系的动态力学研究

在ＰＶＣ／ＰＥ共混体系中加入交联剂和引发剂能产生ＰＶＣ－ＣＯ－ＰＥ共聚物，这种共聚物在共混物中可起到增容剂的作用。通过动态力学分析和扫描电镜研究了ＰＶＣ／ＰＥ交联共混体系的相容性。发现引发剂、交联剂、稳定剂和增塑剂等对共混物中的交联反应均有较大的影响。     

新型光固化环氧丙烯酸酯乳液的制备及其防腐性能研究

将环氧树脂和非离子型表面活性剂在一定温度下与丙烯酸反应合成出改性环氧丙烯酸酯树脂,再利用相反转乳化法制备得到光固化水性环氧乳液。对该反应的原料种类、反应条件、以及乳化工艺进行了优化研究,并对不同条件下得到的乳液进行了综合性能评价。着重考察了环氧树脂的种类以及光引发剂的种类对乳液粒径、清漆膜电化学防腐性能和耐盐雾性能的影响。结果表明:选取环氧树脂E20,光引发剂IRGACURE651,酯化反应温度为105℃,反应时间3h,乳化温度为25℃~30℃,搅拌速度为800r/min时,制得的乳液稳定性和漆膜性能(包括漆膜的力学性能、电化学防腐性能和耐盐雾性能)最佳。     

Epoxy/poly(benzyl methacrylate) blends: miscibility, phase separation on curing and morphology

Diglycidyl ether of bisfenol-A (DGEBA)/polybenzyl methacrylate (PBzMA) blends cured with 4,4’-diaminodiphenylmethane (DDM) were studied. Miscibility, phase separation, cure kinetics and morphology were investigated through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Non-reactive DGEBA/PBzMA blends are miscible over the whole composition range. The addition of PBzMA to the reactive (DGEBA+DDM) mixture slows down the curing rate, although the reaction mechanism remains autocatalytic. On curing, initially miscible (DGEBA+DDM)/PBzMA blends phase separate, arising two glass transition temperatures that correspond to a PBzMA-rich phase and to epoxy network. Cured epoxy/PBzMA blends present different morphologies as a function of the PBzMA content.     

Lanthanide–imidazole complexes as latent curing agents for epoxy resins

Imidazoles have for some time been recognized as curing agents for epoxy resins. Once the resin and the imidazole compound are mixed there is a relatively short time in which the mixture can be used, since the polymerization (curing) reaction occurs to some extent even at room temperature causing the reaction mixture to thicken. In order to circumvent this problem we have found that imidazoles can be complexed with organo-lanthanide compounds thereby tying up the imidazole and retarding its rate of reaction in the cure of epoxy materials at ambient temperatures. When it is desired to enhance the rate of cure the temperature of the mixture is simply raised. This paper concerns studies of the epoxy cure reaction with the M(THD)₃–IM series. M represents the lanthanide metals Eu, Ho, Pr, Dy, Yb, and Gd, and THD is 2,2,6,6-tetramethyl-3,5-heptanedione. Cure reactions were followed by differential scanning calorimetry and in some cases by infrared spectroscopy. We have demonstrated that these organo-lanthanide–imidazole complexes are effective thermally latent curing agents for epoxy resins. At a temperature of 150°C cure is quite rapid. In the course of these studies it has also been determined that there is an inverse correlation between the lanthanide ionic radius in the complex and the temperature at which the cure reaction occurs. Thus the Yb compound, where the imidazole is most strongly bound, cures at the highest temperature and Pr, where imidazole is bound most weakly, at the lowest. Consistent with these facts is the observation that the Yb compound also gives the longest latency period when mixed with epoxy resin.     

Phase separation,porous structure,and cure kinetics in aliphatic epoxy resin containing hyperbranched polyester

Thermosetting blends of an aliphatic epoxy resin and a hydroxyl‐functionalized hyperbranched polymer (HBP), aliphatic hyperbranched polyester Boltorn H40, were prepared using 4,4′‐diaminodiphenylmethane (DDM) as the curing agent. The phase behavior and morphology of the DDM‐cured epoxy/HBP blends with HBP content up to 40 wt % were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The cured epoxy/HBP blends are immiscible and exhibit two separate glass transitions, as revealed by DMA. The SEM observation showed that there exist two phases in the cured blends, which is an epoxy‐rich phase and an HBP‐rich phase, which is responsible for the two separate glass transitions. The phase morphology was observed to be dependent on the blend composition. For the blends with HBP content up to 10 wt %, discrete HBP domains are dispersed in the continuous cured epoxy matrix, whereas the cured blend with 40 wt % HBP exhibits a combined morphology of connected globules and bicontinuous phase structure. Porous epoxy thermosets with continuous open structures on the order of 100–300 nm were formed after the HBP‐rich phase was extracted with solvent from the cured blend with 40 wt % HBP. The DSC study showed that the curing rate is not obviously affected in the epoxy/HBP blends with HBP content up to 40 wt %. The activation energy values obtained are not remarkably changed in the blends; the addition of HBP to epoxy resin thus does not change the mechanism of cure reaction of epoxy resin with DDM. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 889–899, 2006     

Synthesis,characterization of novel interacting blends of acrylated poly(ester-amide)s containing epoxy residues with vinyl ester resin

Unsaturated bisamic acids were prepared by reaction between maleic anhydride and different aromatic diamines. Unsaturated poly(ester-amide) resin (UPEAs) was prepared by reaction of diglycidylether of bisphenol-A (DGEBA) with unsaturated bisamic acids. Acrylation of Unsaturated poly(ester-amide)s (UPEAs) was carried out to afford acrylated UPEAs resin (i.e., AUPEAs). Interacting blends of Acrylated unsaturated poly(ester-amide)s (AUPEAs) with vinyl ester epoxy (VE) resin were prepared. APEAs and AUPEAs were characterized by elemental analysis, molecular weight determined by vapor pressure osmometer and by IR spectral study and by thermogravimetry. The curing of interacting blends was monitored on differential scanning calorimeter (DSC). Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized thermo-gravimetrically (TGA).     

Kinetics study of imidazole-cured epoxy-phenol resins

The reaction kinetics of diglycidyl ether of bisphenol A (DGEBA) cured with different concentrations of imidazole and bisphenol A (BPA) were investigated by using differential scanning calorimetry. Both dynamic and isothermal DSC were studied. Two initiation mechanisms were found to play roles in the curing reactions. One was based on adduct formation of epoxy groups with pyridine-type nitrogen and the other was based on ionic complexes of imidazole and BPA. The subsequent propagation was composed of three main reactions, viz. the epoxide/phenol reaction, the acid/base reaction, and the epoxide/R-O⁻ reaction. A generalized kinetics model was developed and used to predict the conversion of epoxide groups using a wide range of imidazole and BPA concentrations, and cure temperature. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3233–3242, 1999     

Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends

Polymer blends is a well-established and suitable method to produced new polymeric materials as compared to synthesis of a new polymer. The combination of two different types of polymers will produce a new and unique material, which has the attribute of both polymers. The aim of this work is to analyze mechanical and morphological properties of bio-phenolic/epoxy polymer blends to find the best formulation for future study. Bio-phenolic/epoxy polymer blends were fabricated using the hand lay-up method at different loading of bio-phenolic (5 wt%, 10 wt%, 15 wt%, 20 wt%, and 25 wt%) in the epoxy matrix whereas neat bio-phenolic and epoxy samples were also fabricated for comparison. Results indicated that mechanical properties were improved for bio-phenolic/epoxy polymer blends compared to neat epoxy and phenolic. In addition, there is no sign of phase separation in polymer blends. The highest tensile, flexural, and impact strength was shown by P-20(biophenolic-20 wt% and Epoxy-80 wt%) whereas P-25 (biophenolic-25 wt% and Epoxy-75 wt%) has the highest tensile and flexural modulus. Based on the finding, it is concluded that P-20 shows better overall mechanical properties among the polymer blends. Based on this finding, the bio-phenolic/epoxy blend with 20 wt% will be used for further study on flax-reinforced bio-phenolic/epoxy polymer blends.     

Diglycidyl ether of bisphenol-A epoxy resin–polyether sulfone/polyether sulfone ether ketone blends: phase morphology, fracture toughness and thermo-mechanical properties

The properties of diglycidyl ether of bisphenol-A epoxy resin toughened with poly(ether sulfone ether ketone) (PESEK) and poly(ether sulfone) (PES) polymers were investigated. PESEK was synthesised by the nucleophilic substitution reaction of 4,4’-difluorobenzophenone with dihydroxydiphenylsulfone using sulfolane as solvent and potassium carbonate as catalyst at 230 °C. The T _g–composition behaviour of the homogeneous epoxy resin/PESEK blend was modelled using Fox, Gordon–Taylor and Kelley–Bueche equations. A single relaxation near the glass transition of epoxy resin was observed in all the blend systems. From dynamic mechanical analysis, the crosslink density of the blends was found to decrease with increase in the thermoplastic concentration. The storage modulus of the epoxy/PESEK blends was lower than that of neat resin, whilst it is higher for epoxy/PES blends up to glass transition temperature, thereafter it decreases. Scanning electron microscopic studies of the blends revealed a homogeneous morphology. The homogeneity of the blends was attributed to the similarity in chemical structure of the modifier and the cured epoxy network and due to the H-bonding interactions between the blend components. The fracture toughness of epoxy resin increased on blending with PESEK and PES. The increase in fracture toughness was due to the increase in ductility of the matrix. The thermal stability of the blends was comparable to that of neat epoxy resin.     

环氧树脂在热塑性树脂改性中的应用

本文综述了国内外有关利用环氧树脂改性热塑性树脂共混体系研究的最新进展。着重阐述了环氧树脂在热塑性树脂之间的增容作用,如尼龙6(PA6)合金体系,改性聚苯乙烯塑料(ABS)合金体系,以及聚对苯二甲酸丙二醇酯(PTT)合金体系等。同时,介绍了利用环氧树脂的反应活性提高无机填料在聚合物中分散性研究的情况,如二氧化硅纳米粒子在聚醚砜(PES)中,以及滑石粉在聚丙烯(PP)中分散性的提高。最后,简介了环氧树脂改性热塑性树脂提高热塑性树脂物理机械性能方面的研究方向和成果并展望了环氧树脂在热塑性树脂改性研究中的前景。