Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Preparation of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> by polyacrylamide gel processing and its thermoelectric properties

Ca₃Co₄O₉ powder was prepared by a polyacrylamide gel route in this paper. The effect of the processing on microstructure and thermoelectric properties of Ca₃Co₄O₉ ceramics via spark plasma sintering were investigated. Electrical measurement shows that the Seebeck coefficient and conductivity are 170 μV/K and 128 S/cm, respectively, at 700 °C, yielding a power factor value of 3.70 × 10⁻⁴ W m⁻¹ K⁻² at 700 °C, which is larger than that of Ca₃Co₄O₉ ceramics via solid-state reaction processing. The polyacrylamide gel processing is a fast, cheap, reproducible and easily scaled up chemical route to improve the thermoelectric properties of Ca₃Co₄O₉ ceramics by preparing the homogeneous and pure Ca₃Co₄O₉ phase.     

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>composite particles

Using Fe₃O₄ nano-particles as seeds, a new type of Fe₃O₄/Au composite particles with core/shell structure and diameter of about 170 nm was prepared by reduction of Au³⁺ with hydroxylamine in an aqueous solution. Particle size analyzer and transmission electron microscope were used to analyze the size distribution and microstructure of the particles in different conditions. The result showed that the magnetically responsive property and suspension stability of Fe₃O₄ seeds as well as reduction conditions of Au³⁺to Au⁰are the main factors which are crucial for obtaining a colloid of the Fe₃O₄/Au composite particles with uniform particle dispersion, excellent stability, homogeneity in particle sizes, and effective response to an external magnet in aqueous suspension solutions. UV-Vis analysis revealed that there is a characteristic peak of Fe₃O₄/Au fluid. For particles with d(0.5)=168 nm, the λmax is 625 nm.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Au composite nano-particles and their optical properties

Fe₃O₄/Au composite particles with core/shell structure were prepared by reduction of Au³⁺ with hydroxylamine in the presence of an excess of Fe₃ O₄ as seeds. The resultant colloids, with an average diameter of less than 100 nm, were obtained; the remaining non-reacted Fe₃O₄ seeds can be removed by treatment with diluted HCl solution. The Fe₃O₄/Au colloids exhibit a characteristic peak of UV-visible spectra, which largely depend on the size of the particle and the suspension medium. The localized surface plasmon resonance peaks red shift and broaden with increased nanoparticle diameter or increased solvent ionic strength. The optical property is very important in the establishment of means for the detection of biomolecules.     

Voltammetric determination of the trace amounts of bromate in drinking water after pre-concentration on hydrous γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

A differential pulse voltammetric (DPV) method for the determination of bromate in drinking water, after pre-concentration on γ-Al₂O₃, is proposed. The reduction peak of bromate has been observed at the potential E _p -−1.6 V in an ammonia buffer as a supporting electrolyte. The method has been successfully applied to determine a bromate concentration of 2.5 μg·l⁻¹ in drinking water (RSD=6.1%, n=7). A sample pre-treatment with a column filled with mixed cation-exchange resin in Ag, Ba and H forms was needed before pre-concentration of bromate on alumina.     

Effect of metal substitution for cobalt on the oxygen adsorption properties of YBaCo<Subscript>4</Subscript>O<Subscript>7</Subscript>

YBaCo₄O₇ compound is capable to intake and release a large amount of oxygen in the temperature range of 200–400°C. In the present study, the effect of Zn, Ga and Fe substitution for Co on the oxygen adsorption/desorption properties of YBaCo₄O₇ were investigated by thermogravimetry (TG) method. Due to fixed oxidation state of Zn2+ ions, the substitution of Zn²⁺ for Co²⁺ suppresses the oxygen adsorption of YBaCo_4−xZn_xO₇. The substitution of Ga³⁺ for Co³⁺ also decreases the oxygen absorption capacity of YBaCo_4−xGa_xO₇. This can be explained by the strong affinity of Ga³⁺ ions towards the GaO₄ tetrahedron. Compared with Zn- and Ga-substituted samples, the drop of oxygen adsorption capacity is smallest for Fe-substituted samples because of the similar changeability of oxidation states of Co and Fe ions.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Adsorption behavior of <Superscript>99</Superscript>Tc on Fe,Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>

Summary The adsorption of ⁹⁹Tc on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ was studied by batch experiments under aerobic and anoxic conditions. The effects of pH and CO₃^2- concentration of the simulated ground water on the adsorption ratios were also investigated, and the valences of Tc in solution after the adsorption equilibrium were studied by solvent extraction. The adsorption isotherms of TcO₄- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ were determined. Experimental results have shown that the adsorption ratio of Tc on Fe decreases with the increase of pH in the range of 5-12 and increases with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M. Under aerobic conditions, the adsorption ratios of ⁹⁹Tc on Fe₂O₃ and Fe₃O₄ were not influenced by pH and CO₃^2-concentration. When Fe was used as adsorbent, Tc existed mainly in the form of Tc(IV) after equilibrium and in the form of Tc(VII) when the adsorbent was Fe₂O₃ or Fe₃O₄ under aerobic conditions. The adsorption ratios of Tc on Fe, Fe₂O₃ and Fe₃O₄ decreased with the increase of pH in the range of 5-12 and increased with the decrease of the CO₃^2- concentration in the range of 10^-8M-10^-2M under anoxic conditions. Tc existed mainly in the form of Tc(IV) after equilibrium when Fe, Fe₂O₃ and Fe₃O₄ was the adsorbent under anoxic conditions. The adsorption isotherms of TcO_4- on the adsorbers Fe, Fe₂O₃ and Fe₃O₄ are fairly in agreement with the Freundlich’s equation under both aerobic and anoxic conditions.     

Porous redox-active Cu2O-SiO2 nanostructured film: Preparation, characterization and application for a label-free amperometric ferritin immunosensor

A novel Cu₂O-SiO₂ nanostructured particle was synthesized by a solution-phase method and was adopted for construction of a label-free amperometric immunosensor. The porous Cu₂O-SiO₂ nanoparticles had good redox electrochemical activity, large surface-to-volume ratio, film-forming ability and high stability. The physical morphology and structure of Cu₂O-SiO₂ nanoparticles were examined by scanning electron microscope (SEM) and transmission electron microscopy (TEM). The chemical component of Cu₂O-SiO₂ was confirmed by X-ray photoelectron spectroscopy (XPS) and auger electron spectra (AES). The electrode modification process was probed by cyclic voltammetry (CV) and the performance of the immunosensor was studied by differential pulse voltammetry (DPV) measurements. To improve the analytical characteristics of the immunosensor, the experimental conditions were optimized. The immunosensor exhibited a good response to ferritin in ranges from 1.0 to 5.0 and 5.0 to 120.0 ng mL⁻¹ with a detection limit of 0.4 ng mL⁻¹. The fabricated immunosensor could make a low-cost, sensitive, quantitative detection of ferritin, and would have a potential application in clinical immunoassays.     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

Chitosan–iron oxide nanobiocomposite based immunosensor for ochratoxin-A

The rabbit immunoglobulin antibodies (IgGs) have been immobilized onto nanobiocomposite film of chitosan (CH)–iron oxide (Fe₃O₄₎ nanoparticles prepared onto indium–tin oxide (ITO) electrode for detection of ochratoxin-A (OTA). Excellent film forming ability and availability of –NH₂ group in CH and affinity of surface charged Fe₃O₄ nanoparticles for oxygen support the immobilization of IgGs. Differential pulse voltammettry (DPV) studies indicate that Fe₃O₄ nanoparticles provide increased electroactive surface area for loading of IgGs and improved electron transport between IgGs and electrode. IgGs/CH–Fe₃O₄ nanobiocomposite/ITO immunoelectrode exhibits improved characteristics such as low detection limit (0.5 ng dL⁻¹), fast response time (18 s) and high sensitivity (36 μA/ng dL⁻¹ cm⁻²) with respect to IgGs/CH/ITO immunoelectrode.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-C18 nano-magnetic composite materials and their cleanup properties for organophosphorous pesticides

Magnetic Fe₃O₄-C18 composite nanoparticles of approximately 5–10 nm in size were synthesized and characterized by IR spectroscopy, atomic absorption spectroscopy, X-ray diffraction, and transmission electron microscopy. The magnetic Fe₃O₄-C18 composite nanoparticles were applied for cleanup and enrichment of organophosphorous pesticides. Comparative studies were carried out between magnetic Fe₃O₄-C18 composite nanoparticles and common C18 materials. Residues of organophosphorous pesticides were determined by gas chromatography in combination with a nitrogen/phosphorus detector. The cleanup and enrichment properties of magnetic Fe₃O₄-C18 composite nanoparticles are comparable with those of common C18 materials for enrichment of organophosphorous pesticides, but the cleanup and enrichment are faster and easier to perform. Figure Presumed mechanism for the adhesion of the OPs to the Fe₃O₄-C18 magnetic nanoparticles     

Supramolecular microrods can be prepared by mixing aqueous Ru(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>Cl<Subscript>3</Subscript> and K<Subscript>3</Subscript>Fe(CN)<Subscript>6</Subscript> solutions at room temperature

This paper describes the ionic self-assembly method to fabricate supramolecular one-dimensional microrods in solution. Such microrods were formed in a one-step process through the mixing aqueous Ru(NH₃)₆Cl₃ and K₃Fe(CN)₃ solutions at room temperature. Chemical composition of the resulting structures, which are composed of from Fe(CN)₆⁴⁻ and Ru(NH₃)₆³⁺, was determined by energy-dispersed spectroscopy. The data show that the formation of microrods depends on the molar ratio and concentration of the reactants.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Electronic structure and chemical bonding in K<Subscript>2</Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript>

The calculations of the electronic structure of layered polyvanadate K₂V₃O₈ were made employing the spin-polarized tight-binding LMTO method. Calculated magnetic moment for K₄V₆O₁₆ compound phase equals 1.97 μ_B. V-O interactions were established to be dominating in the chemical bonding generation in this polyvanadate according to the estimated crystal orbital overlap population. The covalent bonds V(2)-V(2) in V(2)₂O₇ groups and electron density localization on vanadium atoms in isolated pyramids V(1)O₅ were found.     

Magnetic solid-phase extraction of imatinib and doxorubicin as cytostatic drugs by Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide nanocomposite

Magnetic solid-phase extraction based on Fe₃O₄/graphene oxide nanocomposites was investigated for the separation, preconcentration and determination of imatinib and doxorubicin in aqueous solutions. Synthesis of Fe₃O₄/graphene oxide was characterized by transmission electron microscopy, energy-dispersive X-ray analyzer and vibrating sample magnetometer. After optimizing the conditions, optimal experimental conditions including sample pH, the amount of the magnetic nanoparticles, the effect of salt concentration and other chemotherapy medications, eluent type and extraction time were studied and established. The method showed good linearity for the determination of doxorubicin and imatinib in the concentration range of 0.01–100 μg mL^?1 in aqueous solutions with limit of detection 1.8 ng mL^?1 for doxorubicin and 1.9 ng mL^?1 for imatinib. The relative recoveries of doxorubicin and imatinib levels were 96.7 and 88.4%, respectively. The results indicate that the present procedure is a suitable method for extraction of imatinib and doxorubicin from environmental water samples.     

Amperometric Immunosensor Based on Gold Nanoparticles/Fe3O4-FCNTs-CS Composite Film Functionalized Interface for Carbofuran Detection

In this paper, a novel amperometric immunosensor for the determination of carbofuran based on gold nanoparticles (GNPs), magnetic Fe₃O₄ nanoparticles-functionalized multiwalled carbon nanotubes-chitosan (Fe₃O₄-FCNTs-CS), and bovine serum albumin (BSA) composite film was proposed. First, GNPs were immobilized onto the glassy carbon electrode (GCE) surface, and then the magnetic Fe₃O₄ nanoparticles mixed with chitosan-functionalized multiwall carbon nanotubes (CS-FCNTs) homogeneous composite (CS-FCNTs-Fe₃O₄) was immobilized onto the GNPs layer by electrostatic interactions between amino groups of CS and GNPs. Because chitosan (CS) contains many amino groups, it can absorb more antibodies. FCNTs have high surface area, high electrical conductivity, and it can enhance the electron transfer rate; Magnetite (Fe₃O₄) nanoparticles can provide a favorable microenvironment for biomolecules immobilization due to their good biocompatibility, strong superparamagnetic property, and low toxicity; and GNPs possess high surface-to-volume reaction, stability, and high conductivity. Gold Nanoparticles/Fe₃O₄-FCNTs-CS composite film was constructed onto the GCE surface, which had significant synergistic effects toward immunoreaction signal amplification. The stepwise assembly process was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Under the optimal conditions, the current response was proportional to the concentration of carbofuran ranging from 1.0 ng/mL to 100.0 ng/mL and from 100.0 ng/mL to 200 µg/mL with the detection limit 0.032 ng/mL. The proposed immunosensor exhibited good accuracy, high sensitivity, and stability, and it can be used for detection of carbofuran pesticide.     

Constant current anodic stripping chronopotentiometric determination of uranium in uranium mineral ores via accumulation of K<Subscript>2</Subscript>UO<Subscript>2</Subscript>[Fe(CN)<Subscript>6</Subscript>] on the palladium plated aluminum electrode

In the present work the uranyl hexacyanoferrate (K₂UO₂[Fe(CN)₆]) is deposited on the palladized aluminum (Pd-Al) electrode from a \textUO₂^{2 +} + \textFe( \textCN )₆ ^{- 3} {\text{UO}}_{2}^{2 + } + {\text{Fe}}\left( {\text{CN}} \right)_{6}^{ - 3} solution. Then the anodic stripping chronopotentiometry (ASCP) was used to strip the K₂UO₂[Fe(CN)₆] from the Pd-Al surface. The operational conditions including: pH, K₃Fe(CN)₆ concentration, deposition potential, deposition time and stripping current were optimized. The ASCP calibration graph was linear in concentration range 10–460 μM. of \textUO₂^{2 +} {\text{UO}}_{2}^{2 + } and the detection limit was 8.5 μM. The interference of some concomitant ions during the deposition process of K₂UO₂[Fe(CN)₆] was studied. The proposed method was successfully applied for analysis of some uranium mineral ores.