Influence of flow-induced deformations of fabrics on the formation and transport of bubbles during liquid moulding processes

The viscous flow-induced deformation of non-crimp fabrics during liquid moulding processes, such as resin transfer moulding, and its influence on the creation of bubbles behind the liquid front are studied. A transverse flow with a low Reynolds number through random arrays of aligned cylinders is considered with account of changes in the transverse permeability of fibre bundles. A combined methodology of directly solving the two-dimensional Navier–Stokes equations for the flow in the vicinity of a single fibre and minimization of the dissipation rate in a system of fibres is employed. Sethian’s level set method is used for transient calculations of the motion of the liquid-gas front, at which the capillary pressure is accounted for. The continuity is maintained, and local correlations between the dimensions of neighbouring gaps formed between bundles are used. The elastic deformations of the fibre bundles are calculated based on micromechanical analyses. The void fractions of inter-and intrabundle bubbles obtained differ for deformable and non-deformable fabrics, but both the cases compare well with those from real mouldings.     

Reversible coagulation–fragmentation processes and random combinatorial structures: Asymptotics for the number of groups

The equilibrium distribution of a reversible coagulation‐fragmentation process (CFP) and the joint distribution of components of a random combinatorial structure (RCS) are given by the same probability measure on the set of partitions. We establish a central limit theorem for the number of groups (= components) in the case a(k) = qk^p?1, k ≥ 1, q, p > 0, where a(k), k ≥ 1, is the parameter function that induces the invariant measure. The result obtained is compared with the ones for logarithmic RCS's and for RCS's, corresponding to the case p < 0. © 2004 Wiley Periodicals, Inc. Random Struct. Alg. 2004     

电厂冷却水在湖泊和水库中热扩散过程的数学模拟

本文对电厂冷却水排入湖泊和水库后的热扩散过程进行了数学模拟,建立了三维扩散方程,给出了一维、二维和三维计算湖泊和水库中任意点任意时刻水温上升量的计算公式,并通过实例对一维情形的计算公式进行了验证,结果很好.     

基于元胞自动机的植物病虫害传播的计算机仿真

利用元胞自动机方法建立植物病虫害传播的数学模型。在此基础上,分别对两种不同病虫害来源的情况进行仿真。仿真结果表明,在参数给定的情况下,无论病虫来源于自身还是外界,植物病虫害的传播均在一定时间后达到稳定状态,不同状态元胞占有率相近;相同参数下,同病虫来源于自身相比,植物病虫从外界入侵时,植物被感染的变化率较低,病虫害传播路径较有规律,有利于病虫害源的确定和病虫害的治理。     

Mathematical modeling of the dissolving and deposition processes during solution seepage in a porous medium

A mathematical model that describes solution seepage in a porous medium and the processes of mineral dissolving and secondary deposition is proposed. Self-similar solutions describing the motion of the leading and trailing fronts, that is, the boundaries of the complete-dissolving zone, are determined. The main features of the processes under consideration are studied and numerical calculations are performed. It is shown that the model describes well the experimental data on mineral leaching by sulfate solutions. The dynamics of mineral extraction from productive solutions in a medium with a nonuniformacidity distribution are investigated. It is shown that, in the elevated-PH zones, the mineral is dissolved; whereas, in the low-acidity zones, secondary deposition of the mineral occurs. In the latter case, after the work has been completed, the bed may contain more or less considerable mineral resources, depending on the extent of the low-PH zone and its proximity to an extraction well.     

煤炭城市可持续发展的系统动力学模拟与调控

煤炭城市是由人口、资源、经济与环境四个子系统构成的复杂系统.其可持续发展依赖于各子系统的合理结构和发展模式以及对系统的有效控制.将可持续发展思想与系统动力学模拟方法相结合,在分析了煤炭城市系统结构基础上,构建了煤炭城市系统动力学模型:确定生育指数、各产业投资比例、资源循环利用率等为调控参数,以典型煤炭城市鸡西市为例进行了5种发展模式的模拟和调控.结果表明:可持续发展模式与其他四种发展模式相比,取得的经济、资源、环境整体效益最大,是鸡西市发展的相对最佳方案.     

基于SD的煤炭矿区节能减排仿真与调控

煤炭矿区在生产煤炭能源的同时,会产生大量的能耗和排放,而降低煤炭产量必然会影响矿区的经济效益.如何协调经济发展与能源消耗、污染排放之间的矛盾,是煤炭矿区亟待解决的难点问题.通过分析煤炭生产各环节节能与减排要素、煤炭矿区节能减排系统的复杂结构和系统内部的动态反馈机制,建立了煤炭矿区节能减排系统动力学模型,并对煤炭矿区不同的发展方案进行了仿真模拟.结果表明,矿区总投资、煤炭生产投资、环保投资、各种吨煤能耗量等因素在煤炭矿区节能减排系统中发挥了重要的影响作用;可以通过增加矿区总投资,优化煤炭生产投资与环保投资比例,降低吨煤能耗量来达到矿区经济与节能减排协调发展的状态.