Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Theoretical study of the gas-phase Fe<Superscript>+</Superscript>-mediated oxidation of ethane by N<Subscript>2</Subscript>O

We report herein a comprehensive study of the gas-phase Fe⁺-mediated oxidation of ethane by N₂O on both the sextet and quartet potential energy surfaces (PESs) using density functional theory. The geometries and energies of all the relevant stationary points are located. Initial oxygen-atom transfer from N₂O to iron yields FeO⁺. Then, ethane oxidation by the nascent oxide involves C–H activation forming the key intermediate of (C₂H₅)Fe⁺(OH), which can either undergo C–O coupling to Fe⁺ + ethanol or experience β-H shift giving the energetically favorable product of FeC₂H₄ ⁺ + H₂O. Reaction of FeC₂H₄ ⁺ with another N₂O constitutes the third step of the oxidation. N₂O coordinates to FeC₂H₄ ⁺ and gets activated by the metal ion to yield (C₂H₄)Fe⁺O(N₂). After releasing N₂ through the direct H abstraction and/or cyclization pathways, the system would be oxidized to ethenol, acetaldehyde, and oxirane, regenerating Fe⁺. Oxidation to acetaldehyde along the cyclization –C–to–C hydrogen shift pathway is the most energetically favored channel.     

Reactions of [Cp*Ru(H<Subscript>2</Subscript>O)(NBD)]<Superscript>+</Superscript> with diynes

Abstract  Formal [2 + 2 + 2] addition reaction of [Cp*Ru(H₂O)(NBD)][BF₄] (NBD = norbornadiene) with 4,4′-Diethynylbiphenyl generates [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂. The reaction of [Cp*Ru(H₂O)(NBD)][BF₄] with 1,4-diphenylbutadiyne generates the unusual [2 + 2 + 2] additional organic compound Ph–C≡C–C₉H₈–Ph in addition to the organometallic compound [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄]. [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BPh₄]₂ is generated after the reaction of compound [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂ with Na[BPh₄]. The structure of this compound was confirmed by X-ray diffraction. A possible approach to form Ph–C≡C–C₉H₈–Ph and [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄] is suggested. Graphical Abstract  Formal [2 + 2 + 2] addition reaction of [Cp*Ru(H₂O)(NBD)]BF₄ (NBD = norbornadiene) with 4,4′-Diethynylbiphenyl generates [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂. The reaction of [Cp*Ru(H₂O)(NBD)][BF₄] with 1,4-diphenylbutadiyne simply generates unusual [2 + 2 + 2] additional organic compound Ph–C≡C–C₉H₈–Ph in addition to the organometallic compound [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄]. [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BPh₄]₂ is generated after the reaction of compound [C₉H₉-η⁶-C₆H₄(RuCp*)–C₆H₄(RuCp*)-η⁶-C₉H₉][BF₄]₂ with Na[BPh₄]. The structure of this compound was confirmed by X-ray diffraction. And the possible approach to form Ph–C≡C–C₉H₈–Ph and [Cp*Ru(η⁶-C₆H₅–C≡C–C≡C–Ph)][BF₄] was suggested. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Pyridyl derivatives provide new pathways for labeling protein with fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript>

The purpose of this work was to indirect label IgG with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and to check the radiochemical behavior of the labeled product. The compound of (bis(2-pyridylmethyl)-amino)-acetic acid (L²H) was synthesized and labeled with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺. The labeling yield of ¹⁸⁸Re(CO)₃–L²H was more than 90%. The effects of protein concentration, reaction time, pH and reaction temperature of labeling of IgG with ¹⁸⁸Re(CO)₃–L²H were investigated. The conjugation conditions were optimized. The labeled product was analyzed by size exclusion HPLC and TLC. The stability of ¹⁸⁸Re(CO)₃–L²H–IgG in vitro was high. The results of this study may be useful for [¹⁸⁸Re(CO)₃(H₂O)₃]⁺ labeling of protein for radioimmunotherapy.     

Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003     

Pivalates with the M<Superscript>II</Superscript><Subscript>4</Subscript>O<Subscript>4</Subscript> cubane core (M = Co,Ni): synthesis,structure, magnetic properties,and solid-state thermolysis

Methods were developed for the controlled thermal synthesis of high-spin cubane-like pivalates {M^II ₄(μ₃−OR)₄} (M = Co or Ni; R = H or Me) starting from mono-and polynuclear complexes. The solid-state thermal decomposition of the known pivalate clusters [M^II ₄(μ₃−OMe)₄−(μ₂−OOCBu^t)₂(η²−OOCBu^t)₂(MeOH)₄] and the new clusters [M₄^II(μ₃)−OH₄(η¹−OOCBu^t)₃−(μ−(NH₂)₂C₆H₂Me₂)₃(η¹−(NH₂)₂C₆H₂Me₂)₃]⁺(OOCBu^t)− (M = Co or Ni) was studied by differential scanning calorimetry and thermogravimetry. The thermolysis of cubane-like CoII and NiII pivalates is a destructive process. The phase composition of the decomposition products is determined by the nature of coordinated ligands and the structural features of the metal core.     

Cuboidal oxalate cluster complexes with the Mo<Subscript>3</Subscript>CuQ<Subscript>4</Subscript><Superscript>5+</Superscript> cluster core (Q = S or Se): synthesis,structure, and electrochemical properties

The reactions of the [Mo₃(μ₃-Q)(μ₂-Q)₃(H₂O)₃(C₂O₄)₃]²⁻ complex (Q = S or Se) with CuX salts (X = Cl, Br, I, or SCN) in water produce the cuboidal heterometallic clusters [Mo₃(CuX)(μ₃-Q)₄(H₂O)₃(C₂O₄)₃]²⁻, which were isolated as the potassium and tetraphenylphosphonium salts. Two new compounds, K₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·6H₂O and (PPh₄)₂[Mo₃(CuBr)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O, were structurally characterized. All compounds were characterized by elemental analysis and IR spectroscopy. The K₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] compound was characterized by the ⁷⁷Se NMR spectrum; the (PPh₄)₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃], (PPh₄)₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] and K₂[Mo₃(CuSCN)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O compounds, by electrospray mass spectra. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1639–1644, September, 2007.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular modeling of hydration properties of hydrophobic ions Li<Superscript>+</Superscript>@C<Subscript>60</Subscript> and K<Superscript>+</Superscript>@C<Subscript>60</Subscript>

The Gibbs free energies of solvation (ΔG _s) and the electronic structures of endohedral metallofullerenes M⁺@C₆₀ (M⁺= Li⁺, K⁺) were calculated within the framework of the density functional theory and the polarizable continuum model. In water environment, the equilibrium position of K⁺ is at the center of the fullerene cavity whereas that of Li⁺ is shifted by 0.14 nm toward the fullerene cage. The Li⁺ cation is stabilized by interactions with both the fullerene and solvent. The equilibrium structures of both endohedral metallofullerenes are characterized by very close ΔG _s values. In particular, the calculated ΔG _s values for K⁺@C₆₀ are in the range from −124 to −149 kJ mol⁻¹ depending on the basis set and on the type of the density functional. Molecular dynamics simulations (TIP3P H₂O, OPLS force field, water sphere of radius 1.9 nm) showed that the radial distribution functions of water density around C₆₀ and M⁺@C₆₀ are very similar, whereas orientations of water dipoles around the endohedral metallofullerenes resemble the hydration pattern of isolated metal ions.     

Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Opposite effect of Li<Superscript>+</Superscript> codoping on the upconversion emissions of Er<Superscript>3+</Superscript>-doped TiO<Subscript>2</Subscript> powders

The Er³⁺-Li⁺ codoped TiO₂ powders have been prepared by the non-aqueous sol–gel method. The green and red upconversion emissions centered at about 526, 550 and 663 nm were observed by the ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions of Er³⁺, respectively. Li⁺ codoping has opposite effect on the upconversion emissions intensities for Er³⁺-doped TiO₂ at sintering temperatures of 1,073 and 1,273 K. At 1,073 K, the Er³⁺-doped TiO₂ phase transition from anatase to rutile was accelerated with increasing Li⁺ codoping concentration, leading to the increase of crystal field symmetry of Er³⁺, thus the upconversion emissions intensities decreased. At 1,273 K, Li⁺ codoping had no effect on the phase structure of Er³⁺-doped TiO₂ and only increased the Er–O bond length, it indicated that the upconversion emissions intensities greatly enhanced because of the decrease of crystal field symmetry of Er³⁺.     

Synthesis,DNA-binding and photocleavage studies of cobalt(III) complexes [Co(bpy)<Subscript>2</Subscript>(dpta)]<Superscript>3+</Superscript> and [Co(bpy)<Subscript>2</Subscript>(amtp)]<Superscript>3+</Superscript>

Two novel cobalt(III) mixed-polypyridyl complexes [Co(bpy)₂(dpta)]³⁺ and [Co(bpy)₂(amtp)]³⁺ (bpy = 2,2′-bipyridine, dpta = dipyrido-[3,2-a;2′,3′-c]-thien-[3,4-c]azine, amtp = 3-amino-1,2,4-triazino[5,6-f]-1,10-phenanthroline) have been synthesized and characterized. The interaction of Co^III complexes with calf thymus DNA was investigated by spectroscopic and viscosity measurements. Results suggest that the two complexes bind to DNA via an intercalative mode. Moreover, Co^III complexes have been found to promote the photocleavage of plasmid DNA pBR322 under irradiation at 365 nm. The mechanism studies reveal that hydroxyl radical (OH^•) is likely to be the reactive species responsible for the cleavage of plasmid DNA by [Co(bpy)₂(dpta)]³⁺ and superoxide anion radical (O ₂ ^•− ) acts as the key role in the cleavage reaction of plasmid DNA by [Co(bpy)₂(amtp)]³⁺.     

Rate constant of the recombination of CF<Stack><Subscript>3</Subscript><Superscript>•</Superscript></Stack> radicals in a gas (He,Ar, N<Subscript>2</Subscript>, or CF<Subscript>3</Subscript>I)

From recent rate constant data for the recombination reaction 2CF₃^• → C₂F₆ ($ k_{(CF_3 )_2 }^M $ k_{(CF_3 )_2 }^M ) in the high-pressure limit and from experimental data obtained at intermediate pressures of buffer gases M (M = He, Ar, N₂, CF₃I), analytical expressions for $ k_{(CF_3 )_2 }^M $ k_{(CF_3 )_2 }^M (in Lindemann’s formulation) are derived for the temperature range of 300–1300 K and intermediate pressures of the buffer gases.