Biodegradable microspheres containing poly(epsilon-caprolactone)-Pluronic block copolymers for temperature-responsive release of proteins

Temperature-responsive microspheres were fabricated for the purpose of releasing protein in responsive to surrounding temperature changes. Temperature-responsive polymer, Pluronic was synthesized into block copolymers of poly(epsilon-caprolactone)-Pluronic with two different chain lengths of poly(epsilon-caprolactone). Microspheres loaded with proteins were prepared by a W/O/W emulsion method. The surface morphology was examined by scanning electron microscopy, showing that microspheres with diblock copolymers had porous structures due to hydrophilicity of Pluronic blocks. After incubating the microsphere at 37 degrees C for 7 days, temperature-responsive protein release was monitored with alternating temperature changes between 20 and 37 degrees C. The protein release was attenuated when the microsphere was incubated at 20 degrees C but the release rate was recovered at 37 degrees C, confirming variable release rate according to the temperature changes. The variable release rate of protein was dependent on the length of poly(epsilon-caprolactone) blocks attached to Pluronic.     

Benzimidazole-5-sulfonamides as novel nonpeptide luteinizing hormone releasing hormone (LHRH) antagonists: minimization of mechanism-based CYP3A4 inhibition

Herein we report the development of novel, potent and non-peptide luteinizing hormone releasing hormone (LHRH) antagonists. The optimization towards derivatives free from mechanism-based CYP3A4 inhibition is described. The identification of a main metabolite guided us towards structural modifications of the benzyl moiety, which resulted in significant improvements of the CYP3A4 profile, while maintaining potent LHRH antagonist activity.     

Correlation of annual change of luteinizing hormone-releasing hormone (LH-RH) with gonadal development in amphioxus

The present study demonstrates for the first time by RIA that LH-RH is present in the heads as well as the bodies of the amphioxuses of both sexes. Gonadoliberin increases gradually during the course of gonadal development. At the time of gonadal maturity, LH-RH content reaches a maximum. The annual change of LH-RH correlates well with gonadal development and the gonadosomatic index (GSI). The reproductive season of the amphioxus covers about three months from May to July, and LH-RH content starts to increase in May (66.89 +/- 5.26 ng) and reaches the peak in June (158.57 +/- 3.17 ng), indicating that LH-RH is likely also to be involved in the reproductive activity of the chordate. This finding is of significance in understanding the evolutionary process of the reproductive endocrine in the vertebrate.     

Phospholipid coated poly(lactic acid) microspheres for the delivery of LHRH analogues

The aim of this work was to develop alternative peptide‐loaded microspheres using liposphere formulation—a lipid based microdispersion system. This formulation represents a new type of lipid or polymer‐based encapsulation system developed for parenteral and topical drug delivery of bioactive compounds. Our strategy was to utilize the liposphere formulation to improve the entrapment efficiency and release profile of triptorelin and leuprolide [luteinizing hormone–releasing hormone (LHRH) analogues] in vitro. Peptides (2% w/w) were loaded into lipospheres contained of polylactic acid (PLA) or poly(lactic‐co‐glycolic acid) (PLGA) with several types of phospholipids. The effects of polymer and phospholipid type and concentration, method of preparation and solvents on the liposphere characteristics, particle size, surface and bulk structure, drug diffusion rate, and erosion rate of the polymeric matrix were studied. The use of L ‐PLA (M_w = 2000) and hydrogenated soybean phosphatidylcholine (HSPC) with phospholipid–polymer ratio of 1 : 6 w/w, was the most efficient composition that formed lipospheres of particle size in the range of 10 µm with most of the phospholipid embedded on the particles surface. In a typical procedure, peptides were dissolved in N‐methyl‐2‐pyrrolidone (NMP), and dispersed in a solution of polymer and phospholipids in a mixture of NMP and chloroform with the use of 0.1% poly(vinyl alcohol) (PVA) as the emulsified aqueous medium. Uniform microspheres were prepared after solution was mixed at 2000 rpm at room temperature for 30 min. Using this formulation, the entrapment efficiency of LHRH analogues in lipospheres was up to 80%, and the peptides were released for more than 30 days. Copyright © 2002 John Wiley & Sons, Ltd.     

Injectable poly(ethylene glycol) hydrogels for sustained doxorubicin release

Water‐soluble poly(ethylene glycol) derivatives with multiple “clickable” mercapto groups or double bonds were facilely synthesized in a large scale by direct polycondensation of oligo(ethylene glycol) diol with mercaptosuccinic acid or maleic acid catalyzed by scandium trifluoromethanesulfonate under mild conditions. Injectable hydrogels containing doxorubicin hydrochloride (DOX · HCl) could be rapidly formed using these poly(ethylene glycol) derivatives as precursors via in situ thiol‐ene “click” reaction under physiological conditions without light, initiator, or metal catalyst. DOX · HCl could be sustained released from the hydrogels as a result of the hindrance of the three dimensional hydrogel network on the drug molecules, which makes this kind of DOX‐loaded hydrogels a promising candidate for localized tumor chemotherapy. Copyright © 2016 John Wiley & Sons, Ltd.     

Chitosan microspheres as a delivery system for nasal insufflation

The strain SmSA, identified as Serratia marcescens and known as a biosurfactant producer, was isolated from hydrocarbon contaminated soil from Veracruz, México. The interactions among the C/N, C/Mg and C/Fe ratios have not been examined for this microorganism. In this work was evaluated the effect of these nutrients at three levels using a mineral medium with glucose as the carbon source. A Box-Behnken experimental design was utilised to maximise biosurfactant production, which was assessed by oil spreading and surface tension tests. The treatment with C/N=5, C/Fe=26,000 and C/Mg=30 showed the best result since the surface tension was reduced to 30 mN m(-1). The multiple regression and response surface analyses indicated that the interaction between C/N and C/Mg had the utmost effect on the reduction of surface tension and biosurfactant production. The conditions of the best treatment were used to scale up biosurfactant production in a 3L bioreactor giving a yield of 4.1 gL(-1) of pure biosurfactant. It was found that the biosurfactant was mainly produced in the exponential phase and decreased the surface tension to 31 mN m(-1). The contact between the biosurfactant with heavy oil (15° API) increased its displacement from 9.3 to 18 cm.     

Rational design of hyper-glycosylated human luteinizing hormone analogs (a bioinformatics approach)

Glycoengineering is a recently used approach to extend serum half-life of valuable protein therapeutics. One aspect of glycoengineering is to introduce new N-glycosylation site (Asn-X-Thr/Ser, where X ≠ Pro) into desirable positions in the peptide backbone, resulting in the generation of hyper-glycosylated protein. In this study, human luteinizing hormone (LH) was considered for identification of the suitable positions for the addition of new N-linked glycosylation sites. A rational in silico approach was applied for prediction of structural and functional alterations caused by changes in amino acid sequence. As the first step, we explored the amino acid sequence of LH to find out desirable positions for introducing Asn or/and Thr to create new N-glycosylation sites. This exploration led to the identification of 38 potential N-glycan sites, and then the four acceptable ones were selected for further analysis. Three-dimensional (3D) structures of the selected analogs were generated and examined by the model evaluation methods. Finally, two analogs with one additional glycosylation site were suggested as the qualified analogs for hyper-glycosylation of the LH, which can be considered for further experimental investigations. Our computational strategy can reduce laborious and time-consuming experimental analyses of the analogs.     

High-performance liquid chromatography followed by radioimmunoassay for the determination of a luteinizing hormone-releasing hormone analogue, leuprorelin, and its metabolite

A sensitive method for the determination of leuprorelin (TAP-144), a luteinizing hormone-releasing hormone analogue, and its C-terminal metabolite, M-I, in serum and urine has been developed. Leuprorelin and M-I were extracted from serum or urine samples with Sep-Pak C18 cartridges, and separated completely by high-performance liquid chromatography and determined by radioimmunoassay using [125I]leuprorelin as the labelled antigen. The detection limit of the method was 0.05 ng/ml for leuprorelin and M-I, and the recovery of the compounds added to serum and urine was over 88% with a coefficient of variation (within-assay) of less than 5%. The method was applied to the determination of leuprorelin and M-I-like immunoreactivity in serum or urine after administration of once-a-month injectable microspheres of leuprorelin acetate (TAP-144-SR) to patients with prostate cancer.     

Structural study of PLGA [copoly (DL-lactic/glycolic acid)], a biodegradable polymer for parenteral sustained release preparations, by tandem mass spectrometry.

A copoly (DL-lactic/glycolic acid) (PLGA), with a weight-average molecular weight of about 8400, has been characterized using fast atom bombardment (FAB)-tandem mass spectrometry in order to determine the sequence. Because of the large molecular size, PLGA was partially hydrolyzed and the terminal hydroxyl groups in the resulting oligomer mixture acetylated as the indicator. The FAB spectrum of this sample showed a complex ion signal pattern containing monomer to octamer. Diagnostic product ions containing useful information for sequence determination were observed in collision-induced dissociation-MS/MS and MS/MS/MS of these oligomer ions. The results of analysis for dimers through pentamers showed that they have random sequences of lactic and glycolic acid, suggesting that the whole structure of PLGA also has a random sequence.     

Poly(2-hydroxyethyl acrylate) hydrogels containing hyper-branched poly(amidoamine) for sustained drug release

Hydrogels containing hyper-branched poly(amidoamine) (hb-PAMAM) microenvironments were suggested for the sustained release of ionizable drugs. For this purpose, a series of poly(2-hydroxyethyl acrylate) (PHEA) hydrogels containing hb-PAMAM (PHEA-hb-PAMAM) were prepared by copolymerization of 2-hydroxyethyl acrylate with acryl-terminated hb-PAMAM. The hb-PAMAM was synthesized by the Michael addition reaction of triacryloylhexahydro-1,3,5-triazine (TT) and piperzaine (PZ). By using nonionic Tegafur and ionizable salicylic acid (SA) as model drugs, the release mechanisms of drugs from PHEA-hb-PAMAM hydrogels were investigated. Compared with the release kinetic of Tegafur, the release rate of SA from the hydrogels was evidently slowed down. Moreover, the release rate of SA can be modulated by the addition of salt. This can be attributed to the ionic interaction of SA with hb-PAMAM microenvironments. By analyzing the release kinetics of SA from the hydrogels, it was found that the release of SA followed non-Fickian diffusion.     

Biodegradable poly(ethylene carbonate) nanoparticles as a promising drug delivery system with "stealth" potential

The goal of this study was to investigate the suitability of poly(ethylene carbonate) (PEC) nanoparticles as a novel drug delivery system, fulfilling the requirements for a long circulation time. Particles were obtained with a narrow size distribution and nearly neutral zeta potential. Adsorption studies with human plasma proteins revealed that PEC nanoparticles bind much less proteins in comparison to polystyrene (PS) nanoparticles. Cell experiments with fluorescently labeled PEC showed no uptake of the nanoparticles by macrophages. These novel PEC nanospheres with their unique surface properties are a promising candidate for long circulating drug delivery systems in vivo.     

Frontal polymerization as a new method for developing drug controlled release systems (DCRS) based on polyacrylamide

Stimuli-responsive polymers are macromolecular materials that undergo changes in response to small external stimuli in the environmental conditions. Among stimuli-responsive hydrogels are several polyacrylamides. Frontal polymerization is a fast, easy and inexpensive polymerization technique used for the synthesis of macromolecules.Aim of this work was the evaluation of the Frontal polymerization technique as new method for the preparation of controlled release dosage forms in which drug loading and polymer preparation occur together, as well as the possibility of obtaining more dosage units by a unique preparation. Hydrogels based on polyacrylamide containing diclofenac sodium salt were prepared using the Frontal polymerization and compared with similar systems obtained by the classic batch method. Polymers characterized by three different degree of cross-linking were prepared. The stability of the drug during the sample preparation was evaluated by IR analysis. The obtained samples were characterized in terms of drug content, morphology, in vitro drug release and swelling properties. Samples were studied also divided into disks. The results show that hydrogels based on polyacrylamide can be prepared by Frontal polymerization; these samples show similar properties to those obtained by batch polymerization. The drug is stable in the polymerization reaction conditions. Samples characterized by the lowest degree of cross-linking show drug loading values always higher than samples with the highest one regardless of the preparation method employed. The swelling ratio decreases as the degree of cross-linking increases. Loaded samples swell more than drug free ones. From a single preparation of hydrogel, three disks showing same drug content and in vitro release behaviour can be obtained and thus they can be used as three single dosage units.     

Particle design of three-component system for sustained release using a 4-fluid nozzle spray-drying technique

We prepared composite particles of acetaminophen (Act) with chitosan (Cht) and hydroxypropylmethylcellulose phthalate (HPMCP) as a carrier using a newly developed 4-fluid nozzle spray-dryer. Cht dissolves in acid solutions and forms a gel, but it is insoluble in alkaline solutions. On the other hand, HPMCP is insoluble in acid solutions, but it dissolves in alkaline solutions. Therefore, we tested a preparation of controlled release composite particles using the characteristics of these carriers. Act and Cht mixtures in prescribed ratios were dissolved in an acid solution. Composite particles of Act and HPMCP in prescribed ratios were dissolved in alkaline solutions. We evaluated the composite particles of the three components (Act, Cht, and HPMCP) by preparing solid dispersions using a 4-fluid nozzle spray-dryer. Observation of particle morphology by scanning electron microscopy (SEM) revealed that the particles from the spray-drying process had atomized to several microns and had all become spherical. We investigated the physical properties of the composite particles by powder X-ray diffraction, differential scanning calorimetry, and dissolution rate analysis to clarify the effects of crystallinity on the dissolution rate. Powder X-ray diffraction peaks and the heat of fusion of Act in the spray-dried samples decreased in proportion to the carrier content, indicating that the drug was amorphous. These results indicate that the Act-Cht-HPMCP system formed a solid dispersion. Furthermore, we investigated the interaction between the drug and the carrier using FT-IR analysis. FT-IR spectroscopy of the Act solid dispersions suggested that the Act carbonyl and Cht amino groups formed a hydrogen bond. On the other hand, interaction by hydrogen bond was observed between the carbonyl group of HPMCP with the amino group of Act. In the three-component Act-Cht-HPMCP system, the 4-fluid nozzle spray-dried preparation with a mixing ratio of 1 : 2.5 : 2.5 obtained sustained release preparation in all pH test solutions.     

Poly(2,3-diaminonaphthalene) microspheres as a novel quencher for fluorescence-enhanced nucleic acid detection

In this Communication, we report on the first preparation of conjugation polymer poly(2,3-diaminonaphthalene) (PDAN) microspheres via chemical oxidation polymerization of 2,3-diaminonaphthalene (DAN) monomers by ammonium persulfate (APS) at room temperature. We further demonstrate the use of PDAN microspheres as a novel quencher for fluorescence-enhanced nucleic acid detection.     

Hollow zeolite microspheres as a nest for enzymes: a new route to hybrid heterogeneous catalysts

In the field of heterogeneous catalysis, the successful integration of enzymes and inorganic catalysts could pave the way to multifunctional materials which are able to perform advanced cascade reactions. However, such combination is not straightforward, for example in the case of zeolite catalysts for which enzyme immobilization is restricted to the external surface. Herein, this challenge is overcome by developing a new kind of hybrid catalyst based on hollow zeolite microspheres obtained by the aerosol-assisted assembly of zeolite nanocrystals. The latter spheres possess open entry-ways for enzymes, which are then loaded and cross-linked to form cross-linked enzyme aggregates (CLEAs), securing their entrapment. This controlled design allows the combination of all the decisive features of the zeolite with a high enzyme loading. A chemo-enzymatic reaction is demonstrated, where the structured zeolite material is used both as a nest for the enzyme and as an efficient inorganic catalyst. Glucose oxidase (GOx) ensures the in situ production of H₂O₂ subsequently utilized by the TS-1 zeolite to catalyze the epoxidation of allylic alcohol toward glycidol. The strategy can also be used to entrap other enzymes or combination of enzymes, as demonstrated here with combi-CLEAs of horseradish peroxidase (HRP) and glucose oxidase. We anticipate that this strategy will open up new perspectives, leveraging on the spray-drying (aerosol) technique to shape microparticles from various nano-building blocks and on the entrapment of biological macromolecules to obtain new multifunctional hybrid microstructures.

A spray drying technique is used to prepare hollow zeolite microparticles into which an enzyme can be entrapped. Via this “Lego-like” strategy, we create hybrid heterogeneous catalysts that can run multistep chemo-enzymatic cascade reactions.     

Design and preparation of pulsatile release tablet as a new oral drug delivery system.

To achieve time-controlled or site specific delivery of a drug in the gastrointestinal tract, an orally applicable pulsatile drug release system with the dry-coated tablet form was developed. The system consisted of a less water permeable outer shell and a swellable core tablet; from such a system, the drug was expected to be rapidly released after a certain period of time on the basis of time-controlled disintegration mechanism. Various model disks of outer shell, consisting of hydrogenated castor oil and polyethyleneglycol 6000, were tested for their water penetration rate. The experimental results showed that water penetration proceeded obeying the boundary retreating mechanism, so that the lag time of the system could be controlled by changing either the thickness or the composition of the outer shell. The swelling force of various commercially available disintegrants was quantitatively compared, and it was found that carboxymethylcellulose calcium was the preferable disintegrant to be used for the core tablet. On the basis of the results of a series of fundamental studies, various pulsatile release tablets of isoniazide with different lag times were designed. In the in vitro dissolution test, typical pulsatile release was achieved for all the tablets prepared, and a good correlation was found between the observed lag time and the estimated lag time calculated from an empirical equation deduced from the thickness and polyethyleneglycol 6000 content of the outer shell.     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.