Nanoporous block copolymer micelle/micelle multilayer films with dual optical properties

We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with tunable optical properties. Protonated polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and anionic polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the opposite BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (M(w)) of the constituents. PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K) films prepared at pH 4 (for PS(7K)-b-P4VP(28K)) and pH 6 (for PS(2K)-b-PAA(8K)) are highly nanoporous and antireflective. In contrast, PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K) films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS(2K)-b-PAA(8K). Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS(36K)-b-P4VP(12K)/PS(16K)-b-PAA(4K) at pH 4/4) were also nanoporous. This is attributed to a decrease in interdigitation between the adjacent corona shells of the low M(w) BCMs, thus creating more void space between the micelles. Multilayer films with antireflective and photochromic properties were obtained by incorporating a water-insoluble photochromic dye (spiropyran) into the hydrophobic PS core of the BCMs assembled in the films. The optical properties of these films can be modulated by UV irradiation to selectively and reversibly control the transmission of light. Light transmission of higher than 99% was observed with accompanying photochromism in the (PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K)) multilayer films assembled at pH 4/6. Our approach highlights the potential to incorporate a range of materials, ranging from conventional hydrophilic materials with specific interactions to hydrophobic compounds, into the assembled BCMs to yield multifunctional nanoporous films.     

Self‐assembly of thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) micelles for drug delivery

Self‐assembled thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) (PAA‐b‐PNIPAM) micelles for entrapment and release of doxorubicin (DOX) was described. Block copolymer PAA‐b‐PNIPAM associated into core‐shell micelles in aqueous solution with collapsed PNIPAM block or protonated PAA block as the core on changing temperature or pH. Complexation of DOX with PAA‐b‐PNIPAM triggered by the electrostatic interaction and release of DOX from the complexes due to the changing of pH or temperature were studied. Complex micelles incorporated with DOX exhibited pH‐responsive and thermoresponsive drug release profile. The release of DOX from micelles was suppressed at pH 7.2 and accelerated at pH 4.0 due to the protonation of carboxyl groups. Furthermore, the cumulative release of DOX from complex micelles was enhanced around LCST ascribed to the structure deformation of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5028–5035, 2008     

Adsorption isotherms and dissipation of adsorbed poly(N-isopropylacrylamide) in its swelling and collapsed states

Poly(N-isopropylacrylamide) (PNIPAM) physisorbed on gold surfaces in aqueous solutions has been studied using a quartz crystal microbalance with dissipation monitoring (QCM-D). The adsorption isotherms of the polymer, that is, the adsorbed mass versus the concentration of PNIPAM in solution, show distinctly different behaviors at temperatures below and above a lower critical solution temperature (LCST). Below the LCST, PNIPAM forms a single compact layer in solutions with concentrations up to 100 ppm in weight; above the LCST, much thicker films of PNIPAM form in the same concentration range. Changes in the dissipation factor versus solvent concentration show a behavior similar to those in the isotherms. The difference in the adsorption behavior below and above the LCST can be qualitatively explained in terms of the conformation difference of the polymer in its swelling and collapsed states.     

基于星型杂臂环糊精聚合物的纳米胶束: 构筑及包合特性

通过胺化反应和原子转移自由基聚合(ATRP),合成了以β-环糊精为“核”,以1条聚乙二醇和2~4条聚N-异丙基丙烯酰胺为“臂”的双亲水性星型杂臂聚合物(MPEG-CD-PNIPAMx)。通过1H NMR,13C NMR和凝胶渗透色谱/多角度激光光散射联用(SEC/MALLS)对其结构进行了表征。对1H NMR峰面积积分计算得聚N-异丙基丙烯酰胺“臂”数为2~4。通过紫外-可见分光光度计测得该星型大分子的较低溶液临界温度(LCST)为37℃。MPEG-CD-PNIPAMx在其水溶液温度达到LCST以上时呈现两亲性,并通过疏水相互作用自组装成以聚N-异丙基丙烯酰胺为“核”,以β-环糊精及聚乙二醇为“壳”的纳米级胶束粒子。通过MPEG-CD-PNIPAMx及其胶束粒子在芘溶液中的荧光光谱,发现胶束粒子对疏水性客体小分子的包合可发生在处于壳层的β-环糊精的疏水性空腔和胶束粒子的疏水性内核。     

Polymer multilayer film formation studied by in situ ellipsometry and electrochemistry

Polyelectrolyte multilayer films adsorbed on gold surfaces were studied by combined ellipsometric and electrochemical methods. Multilayers were composed of “synthetic” (poly(4-styrenesulfonic acid) ammonium salt (PSS) and poly(allylamine hydrochloride) (PAH) (PSS/PAH)) and “semi-natural” (carboxymethyl cellulose (CMC) and chitosan (CHI) (CMC/CHI)) polyelectrolytes. It was found that only PSS/PAH Layer-by-Layer (LbL) assembled structures result in dense surface confined films that limit permeability of small molecules, such as ferri-/ferrocyanide. The PSS/PAH assemblies can be envisaged as films with pinholes, through which small molecules diffuse. During the LbL deposition process of these films a number of pinholes quickly decay. A representative pinhole diameter was found to be approximately 20 μm, which determines the diffusion of small molecules through LbL films, and yet remains constant when the film consists of a few LbL assembled polyelectrolyte bilayers. CMC/CHI LbL assemblies at gold electrode surfaces give very low density films, which do not limit the diffusion of ferri-/ferrocyanide between the surface of the electrode and the solution.     

Effect of structural isomerism and polymer end group on the pH-stability of hydrogen-bonded multilayers

Association of tannic acid (TA) with structurally isomeric poly(N-isopropylacrylamide) (PNIPAM) and poly(2-isopropyl-2-oxazoline) (PIPOX) has been examined at surfaces to understand the effect of different molecular arrangements in a polymer repeating unit of structural isomers on the construction and pH-stability of hydrogen-bonded multilayers. Films were fabricated using layer-by-layer (LbL) technique through hydrogen-bonding interactions primarily between carbonyl groups of neutral polymers and hydroxyl groups of TA molecules at pH 2. PIPOX and TA formed thinner and more stable films in the pH scale with a critical dissolution pH of 9 when compared to films of PNIPAM and TA with a critical pH of 8. The differences in the thickness and pH-stability were due to different conformational behavior of PNIPAM and PIPOX in water which affects the accessibility of carbonyl groups for participation in the hydrogen bonding and the number of binding sites between the polymer pairs. Addition of electrostatic interactions by introducing amino groups only at the PIPOX chain end shifted the critical dissolution pH to higher values and resulted in gradual dissolution of the films in a wide pH range of 9-12. Such films hold promise for use in biomedical field due to biocompatibility and lower critical solution temperature (LCST) behavior at near physiological temperature of PNIPAM and PIPOX together with the pH-response of the hydrogen-bonded films.     

Molecular design of outermost surface functionalized thermoresponsive polymeric micelles with biodegradable cores

We prepared well‐defined diblock copolymers of thermoresponsive poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) blocks and biodegradable poly(D ,L ‐lactide) blocks by combination of reversible addition‐fragmentation chain transfer radical (RAFT) polymerization and ring‐opening polymerization. α‐Hydroxyl, ω‐dithiobenzoate thermoresponsive polymers were synthesized by RAFT polymerization using hydroxyl RAFT agents. Biodegradable blocks were prepared by ring‐opening polymerization of D ,L ‐lactide initiated by α‐hydroxyl groups of thermoresponsive polymers, which inhibit the thermal decomposition of ω‐dithioester groups. Terminal dithiobenzoate (DTBz) groups of thermoresponsive blocks were easily reduced to thiol groups and reacted with maleimide (Mal). In aqueous media, diblock copolymer products formed surface‐functionalized thermoresponsive micelles. These polymeric micelles had a low critical micelle concentration of 22 μg/L. In thermoresponsive studies of the micelles, hydrophobic DTBz‐surface micelles demonstrated a significant shift in lower critical solution temperature (LCST) to a lower temperature of 30.7 °C than that for Mal‐surface micelles (40.0 °C). In addition, micellar LCST was controlled by changing bulk mixture ratios of respective heterogeneous end‐functional diblock copolymers. Micellar disruption at acidic condition (pH 5.0) was completed within 5 days due to hydrolytic degradation of PLA cores, regardless of showing a slow disruption rate at physiological condition. Furthermore, we successfully improved water‐solubility of hydrophobic drug, paclitaxel by incorporating into the micellar cores. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7127–7137, 2008     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

PNIPAM-b-聚碳酸酯温敏胶束的制备及用作药物控制释放载体的研究

以多孔硅球固定化猪胰脂肪酶(IPPL)为催化剂,温敏性HO-PNIPAM为大分子引发剂,5-甲基-5-烯丙氧羰基-三亚甲基碳酸酯(MAC)和5,5-二甲基三亚甲基碳酸酯(DTC)为共聚单体,通过开环聚合合成了不同结构比例的两亲性嵌段型共聚物P(MAC-co-DTC) -b-PNIPAM.该嵌段型共聚物在水中可自组装形成...     

End-grafted low-molecular-weight PNIPAM does not collapse above the LCST

The interfacial properties of end-grafted temperature-responsive poly(N-isopropylacryamide) (PNIPAM) were quantified by direct force measurements both above and below the lower critical solution temperature (LCST) of 32 degrees C. The forces were measured between identical, opposing PNIPAM films and between a PNIPAM film and a lipid membrane. At the grafting densities and molecular weights investigated, the polymer extension did not change significantly above the LCST, and the polymers did not adhere. Below the LCST, the force-distance profiles suggest a vertical phase separation, which results in a diluter outer layer and a dense surface proximal layer. At large separations, the force profiles agree qualitatively with simple polymer theory but deviate at small separations. Importantly, at these low grafting densities and molecular weights, the end-grafted PNIPAM does not collapse above the LCST. This finding has direct implications for triggering liposomal drug release with end-grafted PNIPAM, but it increases the temperature range where these short PNIPAM chains function as steric stabilizers.     

Characterization of layer-by-layer self-assembled multilayer films of diblock copolymer micelles

The in situ layer-by-layer (LbL) self-assembly of low Tg diblock copolymer micelles onto a flat silica substrate is reported. The copolymers used here were a cationic poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) (50qPDMA-PDEA; 50q refers to a mean degree of quaternization of 50 mol % for the PDMA block) and zwitterionic poly(methacrylic acid)-block-poly(2-(diethylamino)ethyl methacrylate) (PMAA-PDEA), which has anionic character at pH 9. Alternate deposition of micelles formed by these two copolymers onto a silica substrate at pH 9 was examined. The in situ LbL buildup of the copolymer micelle films was monitored using zeta potential measurements, optical reflectometry, and a quartz crystal microbalance with dissipation monitoring (QCM-D). For a six layer deposition, complete charge reversal was observed after the addition of each layer. The OR data indicated clearly an increase in adsorbed mass with each additional micelle layer and suggest that some interdiffusion of copolymer chains between layers and/or an increase in the film roughness, and hence in the effective surface area of the micellar multilayers, must take place as the film is built up. QCM-D data indicated that the self-assembled micellar multilayers on a flat silica substrate undergo structural changes over a prolonged period. This is attributed to longer-term interdiffusion of the copolymer chains between the outer two layers after the initial adsorption of each layer is complete. The QCM-D data further suggest that the outer adsorbed layers adopt a progressively more extended conformation, particularly for the higher numbered layers. The morphology of each successive layer was characterized using in situ soft-contact atomic force microscopy, and micelle-like surface aggregates are clearly observed within each layer of the complex film, suggesting the persistence of aggregate structures throughout the multilayer structure.     

Synthesis and self-assembly behavior of thermoresponsive triblock copolymer

Block copolymers comprising thermosensitive poly(N-isopropylacrylamide) (PNIPAM) and hydrophobic poly(n-butyl acrylate) (PBA) blocks, were synthesized using the reversible addition-fragmentation chain transfer polymerization (RAFT), their thermosensitive behavior was studied by ultraviolet spectrophotometer (UV) and dynamic light scattering (DLS). The lower critical solution temperature (LCST) was strongly correlated to the hydrophobic/hydrophilic ratio of the copolymers. Their micellization and self-assembly behavior in dilute aqueous solution were studied by surface tension (SFT), DLS and TEM. The resulting block copolymers reversibly formed or deformed micellar assemblies during their LCSTs. The critical micelle concentration (CMC) was controlled by the composition of PBA and PNIPAM, indicating the successful formation of the block copolymers.     

含环糊精的温度敏感性聚合物的合成及自组装

合成了侧基含环糊精的聚异丙基丙烯酰胺(PnipamCD), 该聚合物在水溶液中具有较高的最低临界溶解温度(LCST). 快速升温到溶液的LCST以上可形成球形胶束, 慢速升温到LCST以上可形成空心囊泡. 在PNIPAM的选择性溶剂中, PnipamCD形成棒状组装体.     

Characterizing the pH-responsive behavior of thin films of diblock copolymer micelles at the silica/aqueous solution interface

The pH-responsive behavior of cationic diblock poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) copolymer micelles adsorbed at the silica/aqueous solution interface has been characterized. The micellar morphology of this copolymer, initially adsorbed at pH 9, can be dramatically altered by lowering the solution pH. The original micelle-like morphology of the adsorbed copolymer chains at pH 9 completely disappears as the pH is decreased to 4, and a brush-like layer structure is produced. This change results from protonation of the copolymer chains: the subsequent electrostatic repulsions within the film drive the copolymer chains to expand into the aqueous phase. Returning the solution pH from 4 to 9 causes this brush-like layer to collapse, with atomic force microscopy images suggesting degradation of the film. Hence, the pH-responsive behavior of the copolymer film exhibits irreversible morphological changes. Measurements of the adsorbed/desorbed amounts of the copolymer film were conducted using both a quartz crystal microbalance with dissipation monitoring (QCM-D) and optical reflectometry (OR). After an initial rinse at both pH values, the OR adsorbed mass becomes almost constant during subsequent pH cycling, whereas the corresponding QCM-D adsorbed mass changes significantly but reversibly in response to the solution pH. Since the QCM-D measures a bound mass that moves in tandem with the surface, the discrepancy with the OR data is due to changes in the amount of bound water in the copolymer film as a result of the pH-induced changes in surface morphology. The larger effective mass observed at pH 4 suggests that the brush-like layer contains much more entrapped water than the micellar films at pH 9. The pH dependence of the contact angle of the adsorbed film is consistent with the changes observed using the other techniques, regardless of whether the solution pH is altered in situ or the aqueous solution is completely replaced. In fact, comparison of these two approaches provides direct evidence of the exposure of adsorbed micelle core blocks to the solution during pH cycling and the concomitant impact upon all the other measurements.     

N-异丙基丙烯酰胺/丙烯酸胆甾醇酯共聚物研究

合成和表征了N 异丙基丙烯酰胺 (NIPAM)与丙烯酸胆甾醇酯 (CHA)的共聚物 .利用表面张力和荧光探针法研究了共聚物水溶液的表面活性性能 ,确定了其临界胶束浓度 (CMC) .利用浊度法和荧光探针法测定了共聚物的最低临界溶液温度 (LCST) .研究发现 ,在聚N 异丙基丙烯酰胺 (PNIPAM)分子链中引入疏水结构单元CHA会使其LCST下降 ;且随着共聚物中CHA含量的增加 ,LCST下降幅度增加 .在PNIPAM链段中引入少量的CHA就会使其表现出明显的两亲性 ,共聚物在水中能形成有壳核结构的稳定胶束 .通过将疏水化合物胆甾醇作为模拟药物包埋在胶束的疏水核中的研究 ,证实所得的胶束能包埋疏水药物 ,且随着包埋胆甾醇含量的增加 ,胶束平均粒径增大 .     

Controlled aggregation behavior of thermoresponsive polymeric micelles by introducing hydrophilic segments as corona components

Poly[N‐isopropylacrylamide‐co‐N‐(3‐methoxypropyl)acrylamide]‐b‐poly(D,L‐lactide) (P(IPAAm‐co‐MPAAm)‐b‐PLA) as a thermoresponsive block copolymer and PMPAAm‐b‐PLA as a nonthermoresponsive block copolymer were co‐assembled into thermoresponsive polymeric micelles in water. In addition, PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA triblock copolymer was assembled to form thermoresponsive micelles with a hydrophilic layer on the outermost surface of the thermoresponsive corona. Using both micelles, we investigated the effects of introducing hydrophilic polymer segments on micellar aggregation behavior at temperatures above the lower critical solution temperature (LCST) of the thermoresponsive micelles. Despite the external hydrophilic PMPAAm layer on PMPAAm‐b‐P(IPAAm‐co‐MPAAm)‐b‐PLA micelles, aggregation following dehydration of the thermoresponsive segments was not significantly suppressed at temperatures above the LCST due to the instability of the core‐corona state. In contrast, intermicellar aggregation was successfully controlled by blending P(IPAAm‐co‐MPAAm) and PMPAAm in the thermoresponsive corona region, even above the LCST. In particular, PMPAAm chains longer than the P(IPAAm‐co‐MPAAm) chains could regulate the hydrodynamic diameter of micellar aggregates at temperatures above the LCST. The micelles showed enhanced drug release rates in response to temperature changes above the LCST without precipitating from solution. These results indicated that a side‐by‐side structure of hydrophilic/thermoresponsive chains in the corona region could effectively control the micellar aggregation state after a thermal phase transition. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1695–1704     

Synthesis and characterization of core–shell‐type polymeric micelles from diblock copolymers via reversible addition–fragmentation chain transfer

A method was developed to enable the formation of nanoparticles by reversible addition–fragmentation chain transfer polymerization. The thermoresponsive behavior of polymeric micelles was modified by means of micellar inner cores and an outer shell. Polymeric micelles comprising AB block copolymers of poly(N‐isopropylacrylamide) (PIPAAm) and poly(2‐hydroxyethylacrylate) (PHEA) or polystyrene (PSt) were prepared. PIPAAm‐b‐PHEA and PIPAAm‐b‐PSt block copolymers formed a core–shell micellar structure after the dialysis of the block copolymer solutions in organic solvents against water at 20 °C. Upon heating above the lower critical solution temperature (LCST), PIPAAm‐b‐PHEA micelles exhibited an abrupt increase in polarity and an abrupt decrease in rigidity sensed by pyrene. In contrast, PIPAAm‐b‐PSt micelles maintained constant values with lower polarity and higher rigidity than those of PIPAAm‐b‐PHEA micelles over the temperature range of 20–40 °C. Structural deformations produced by the change in the outer polymer shell with temperature cycles through the LCST were proposed for the PHEA core, which possessed a lower glass‐transition temperature (ca. 20 °C) than the LCST of the PIPAAm outer shell (ca. 32.5 °C), whereas the PSt core with a much higher glass‐transition temperature (ca. 100 °C) retained its structure. The nature of the hydrophobic segments composing the micelle inner core offered an important control point for thermoresponsive drug release and the drug activity of the thermoresponsive polymeric micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3312–3320, 2006     

Layer-by-layer assembly of salt-containing polyelectrolyte complexes for the fabrication of dewetting-induced porous coatings

The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbL-assembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs.     

Temperature responsive complex coacervate core micelles with a PEO and PNIPAAm corona

In aqueous solutions at room temperature, poly( N-methyl-2-vinyl pyridinium iodide)- block-poly(ethylene oxide), P2MVP 38- b-PEO 211 and poly(acrylic acid)- block-poly(isopropyl acrylamide), PAA 55- b-PNIPAAm 88 spontaneously coassemble into micelles, consisting of a mixed P2MVP/PAA polyelectrolyte core and a PEO/PNIPAAm corona. These so-called complex coacervate core micelles (C3Ms), also known as polyion complex (PIC) micelles, block ionomer complexes (BIC), and interpolyelectrolyte complexes (IPEC), respond to changes in solution pH and ionic strength as their micellization is electrostatically driven. Furthermore, the PNIPAAm segments ensure temperature responsiveness as they exhibit lower critical solution temperature (LCST) behavior. Light scattering, two-dimensional 1H NMR nuclear Overhauser effect spectrometry, and cryogenic transmission electron microscopy experiments were carried out to investigate micellar structure and solution behavior at 1 mM NaNO 3, T = 25, and 60 degrees C, that is, below and above the LCST of approximately 32 degrees C. At T = 25 degrees C, C3Ms were observed for 7 < pH < 12 and NaNO 3 concentrations below approximately 105 mM. The PEO and PNIPAAm chains appear to be (randomly) mixed within the micellar corona. At T = 60 degrees C, onion-like complexes are formed, consisting of a PNIPAAm inner core, a mixed P2MVP/PAA complex coacervate shell, and a PEO corona.     

Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide)

In this report, we employ surface-initiated atom transfer radical polymerization (SI-ATRP) to graft a thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), of controlled thickness from porous silicon (pSi) films to produce a stimulus-responsive inorganic-organic composite material. The optical properties of this material are studied using interferometric reflectance spectroscopy (IRS) above and below the lower critical solution temperature (LCST) of the PNIPAM graft polymer with regard to variation of pore sizes and thickness of the pSi layer (using discrete samples and pSi gradients) and also the thickness of the PNIPAM coatings. Our investigations of the composite's thermal switching properties show that pore size, pSi layer thickness, and PNIPAM coating thickness critically influence the material's thermoresponsiveness. This composite material has considerable potential for a range of applications including temperature sensors and feedback controlled drug release. Indeed, we demonstrate that modulation of the temperature around the LCST significantly alters the rate of release of the fluorescent anticancer drug camptothecin from the pSi-PNIPAM composite films.