Biophysical aspects of agar-gel supported bilayer lipid nembranes: a new method for forming and studying planar bilayer lipid membranes

Conventional bilayer lipid membranes (BLMs), formed by either the painting method or the Langmuir-Blodgett technique, lack the desired stability. This paper presents a simple method for forming long-lived BLMs on agar-gel supports. The supported BLM reported has a greatly improved mechanical stability and also has desirable dynamic properties. These self-assembled BLMs are of significant interest, in view of their similarity of biological membranes, their molecular dimension and their spontaneous formation.     

A needle-and-thread approach to bilayer transport: permeation of a molecular umbrella-oligonucleotide conjugate across a phospholipid membrane

A di-walled molecular umbrella, composed of two choloyl groups, one spermidine moiety, and a 5-thiol(2-nitrobenzoyl) "handle", was covalently attached to a 16-mer oligonucleotide (S-dT16) through a disulfide bond. Incubation of this conjugate (1) with vesicles made from 1-palmitoyl-2-oleyol-sn-glycero-3-phosphocholine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (95/5, mol/mol) (200 nm diameter, extrusion) that contained entrapped glutathione (GSH) at 37 degrees C resulted in the liberation of the oligonucleotide and the umbrella-bound 5-mercapto(2-nitrobenzoyl) moiety (USH) via thiolate-disulfide interchange. The appearance of USH, together with the absence of leakage of entrapped GSH and a vesicular capture of the oligonucleotide that matches the extent of USH formation, provides compelling evidence for delivery of S-dT16 into the aqueous compartment of these vesicles. In a sense, the molecular umbrella functions like a "needle" in providing a pathway for the oligonucleotide (the "thread") to cross the membrane.     

A diamagnetic Mossbauer probe method for studying a solid-gas interface and related catalytic processes

The results of recent studies involving the application of diamagnetic Mossbauer dopant cations for the investigation of heterogeneous catalytic reactions are described. Possibilities for using the information contained in Mossbauer spectra to clarify the nature of active catalytic centers are discussed. It is shown that, in some cases, the catalytic tests allow the correctness of the chemical interpretation of spectral parameters of the dopant atoms under study to be verified.     

Interaction of charged lipid vesicles with planar bilayer lipid membranes: detection by antibiotic membrane probes.

A technique has been developed for monitoring the interaction of charged phospholipid vesicles with planar bilayer lipid membranes (BLM) by use of the antibiotics Valinomycin, Nonactin, and Monazomycin as surface-charge probes. Anionic phosphatidylserine vesicles, when added to one aqueous compartment of a BLM, are shown to impart negative surface charge to zwitterionic phosphatidylcholine and phosphatidylethanolamine bilayers. The surface charge is distributed asymmetrically, mainly on the vesicular side of the BLM, and is not removed by exchange of the vesicular aqueous solution. Possible mechanisms for the vesicle-BLM interactions are discussed.     

Positron annihilation: a unique method for studying polymers

Positron annihilation is a unique technique for studying the local free volume of polymers. Employing the positron annihilation lifetime spectroscopy (PALS) the size and size distribution of subnanometer size holes which constitute the excess free volume may be studied. In combination with macroscopic volume data the fractional free volume and the number density of holes may be estimated. After presenting the principles of the method, some examples typically for the investigation of the free volume in polymers will be given. Moreover, the study of interdiffusion in demixed polymer blends and further applications are shortly reviewed     

A new microwave dielectric method for studying photoinitiated chain radical polymerization processes

Measurements of both real and imaginary parts of the dielectric constant at a fixed microwave frequency have been performed on n-butyl acrylate/poly(n-butyl acrylate) mixtures. The dielectric constant of the mixtures has been compared with that of neat n-butyl acrylate during UV photoinitiated polymerization. The values of the imaginary part of the dielectric constant thus obtained have allowed determination of the instantaneous monomer concentration and verified the kinetic equation for the photoinitiated polymerization process. The limits of validity of the method as well as its capability of providing detailed kinetic information are also discussed.     

High fidelity neuronal networks formed by plasma masking with a bilayer membrane: analysis of neurodegenerative and neuroprotective processes

Spatially defined neuronal networks have great potential to be used in a wide spectrum of neurobiology assays. We present an original technique for the precise and reproducible formation of neuronal networks. A PDMS membrane comprising through-holes aligned with interconnecting microchannels was used during oxygen plasma etching to dry mask a protein rejecting poly(ethylene glycol) (PEG) adlayer. Patterns were faithfully replicated to produce an oxidized interconnected array pattern which supported protein adsorption. Differentiated human SH-SY5Y neuron-like cells adhered to the array nodes with the micron-scale interconnecting tracks guiding neurite outgrowth to produce neuronal connections and establish a network. A 2.0 μm track width was optimal for high-level network formation and node compliance. These spatially standardized neuronal networks were used to analyse the dynamics of acrylamide-induced neurite degeneration and the protective effects of co-treatment with calpeptin or brain derived neurotrophic factor (BDNF).     

New differential permeation rate method for determination of membrane transport parameters of gases

A new method for determining the membrane transport parameters (diffusivity, permeability and solubility) of gases through nonporous polymeric membranes is described. The method employs a continuous permeation chamber containing a flat membrane. The most important feature of this method is that, instead of a step concentration change, a rectangular pulse or impulse is sent to the upstream side of the membrane. Consequently, no steady state is approached but a signal peak of typical form can be recorded. The permeability and the diffusivity can be estimated from the height and half-width of the peak, respectively. The method was applied to measure the permeability of hydrocarbons through a polyethylene membrane, the permeation rate being measured by a flame ionization detector. The method and the derived relations are valid for other detectors and gas—membrane combinations as well. The advantages of this novel method are that all the membrane transport parameters can be directly evaluated from data of the response peak, whilst approaching the steady state is not necessary and thus the measuring time can be shortened. Finally, the known and new differential permeation rate methods are compared by generalization of the relationship between the input and output (response) functions.     

Rhodopsin in a new model bilayer membrane

In search of a planar and uniform model membrane presenting a wide interaction-surface for the study of photobiological processes, we have succeeded in depositing lipid bilayer on a single face of a porous disc. Using a method that combines the Langmuir-Blodgett dipping and the touching procedures, a symmetrical or asymmetrical bilayer membrane has been obtained. The illumination of rhodopsin-containing membranes appears to increase the permeability to K⁺, Na⁺, and Ca²⁺ with a high selectivity for Ca²⁺. The bilayer adsorption on the porous disc is discussed and an attempt is made to explain the failure of the dipping method in our experimental conditions for preparing an artificial membrane. A comparative look at model membranes is also presented.     

Rapid activation of the melibiose permease MelB immobilized on a solid-supported membrane

Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane of 1 mm diameter in wall jet geometry. The flow is analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system are determined. The experimental data indicate that solution transport represents an intermediate situation between the plug flow and the Hagen-Poiseuille laminar flow regime. However, to a good approximation the rise of the surface concentration can be described by Hagen-Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design, solution exchange as fast as 2 ms was achieved at the surface of a solid-supported membrane. As an application of the technique, the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial ( Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This demonstrates that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k approximately 250 s (-1).     

Exceptional gas permeation selectivity of a glued Langmuir-Blodgett bilayer by pH control

The monolayer properties of 5,11,17,23,29,35-hexakis[(N,N,N-trimethylamonium)-N-methyl-37,38,39,40,41,42-hexakis-n-hexadecyloxy-calix[6]arene hexachloride (1) have been characterized over aqueous solutions of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) as a function of pH. At high pH values (e.g., pH 10), such monolayers show relatively low surface viscosities. At low pH (e.g., pH 4.4), these monolayers exhibit relatively high surface viscosities. The barrier properties of single Langmuir-Blodgett bilayers of 1, which have been ionically cross-linked (i.e., "glued together") with PAA were found to correlate with changes in surface viscosity. Thus, bilayers that were fabricated under low pH conditions exhibited high permeation barriers and high permeation selectivity with respect to He and N(2). Given the extreme thinness of these glued bilayers (ca. 6 nm), the optimized He/N(2) selectivity of ca. 1000 is extraordinary. These results, taken together, demonstrate the feasibility of fine tuning the surface viscosity of monolayers of 1, and also the barrier properties of corresponding glued bilayers, by adjusting the pH of an aqueous subphase that contains a weak polyacid.     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

The bilayer lipid membrane as a basis for a selective sensor for ammonia

The development of an electrochemical method for the selective sensing of ammonia gas, based on a modified bilayer lipid membrane, is described. Membrane selectivity for ammonium ion is achieved through incorporation of the antibiotic nonactin as ion-carrier. The detection limits compare favourably with those for conventional ammonia gas-sensing electrodes, but the selectivity is much superior. Theoretical evaluation of the potential sensitivity of the new gas-sensor with respect to design parameters is described.     

Proton transport into a tethered bilayer lipid membrane

Tethered bilayer lipid membranes (tBLMs) are increasingly used to study biological membranes, membrane proteins and a variety of related topics. A tBLM is formed by binding a lipid bilayer to a metal surface (usually gold) via a hydrophilic tether (usually an ethyleneoxy chain). In this report we present an electrochemical study on ubiquinone in a tBLM which has provided insights into the properties of this hydrophilic layer, which has a very limited capability of storing and releasing protons. It is concluded that the often observed decrease in tBLM resistance upon addition of ionophores (or protonophores) could be due to the penetration of ions (or protons) into the membrane rather than transport through the membrane.     

Analysis of membrane permeation from a deposited droplet

Asymptotically valid analyses are outlined for simulating membrane permeation from a shrinking deposited droplet. A previously published analysis for thick membranes is retraced to elucidate the source of its limitations. A thin membrane solution is also developed. While “thick” and “thin” are superficially defined relative to initial droplet size, the approximations introduced in each analysis are shown to depend more subtly upon droplet solubility in the membrane material.     

Analysis of membrane permeation from a deposited droplet

Asymptotically valid analyses are outlined for simulating membrane permeation from a shrinking deposited droplet. A previously published analysis for thick membranes is retraced to elucidate the source of its limitations. A thin membrane solution is also developed. While “thick” and “thin” are superficially defined relative to initial droplet size, the approximations introduced in each analysis are shown to depend more subtly upon droplet solubility in the membrane material.     

Calcium transport by sarcoplasmic reticulum Ca-ATPase can be investigated on a solid-supported membrane

Sarcoplasmic reticulum (SR) native vesicles incorporating Ca-ATPase are adsorbed on a solid-supported lipid membrane (SSM). Upon adsorption, the ion pumps are chemically activated by concentration jumps of ATP and the capacitive current transients generated by SR Ca-ATPase are measured under potentiostatic conditions. The Michaelis-Menten constant, K(M), for ATP is evaluated by varying the concentration of ATP in the activating solution. This preliminary result shows that ion transport by SR Ca-ATPase can be suitably investigated by a technique based on concentration jumps on an SSM.