Photoinitiated cationic polymerization with triarylsulfonium salts

Triarylsulfonium salts Ar₃S⁺MX with complex metal halide anions such as BF, AsF, PF, and SbF are a new class of highly efficient photoinitiators for cationic polymerization. In this article we describe several synthetic routes to the preparation of these compounds along with their physical and spectroscopic properties. Mechanistic studies have shown that when these compounds are irradiated at wavelengths of 190–365 nm carbon–sulfur bond cleavage occurs to form radical fragments. At the same time the strong Br??nsted acid HMX_n, which is the active initiator of cationic polymerization that takes place in subsequent “dark” steps, is also produced. A study of the parameters that affect the photolysis of triarylsulfonium salts is reported with a measurement of the absolute quantum yields. The cationic polymerizations of four typical monomers—styrene oxide, cyclohexene oxide, tetrahydrofuran, and 2-chloroethyl vinyl ether—with triarylsulfonium salt photoinitiators are described.     

Synthesis and photoactivity of novel 5‐arylthianthrenium salt cationic photoinitiators

5‐Arylthianthrenium salts are a class of efficient triarylsulfonium salt photoinitiators for cationic polymerization. These compounds were prepared by a simple, straightforward, versatile, and high yield route. The new photoinitiators were characterized by standard analytical and spectroscopic techniques, and their activity as cationic photoinitiators was compared with related triarylsulfonium salts of similar structures using Fourier transform real‐time infrared spectroscopy. Through the use of electron‐transfer photosensitizers, the response of these photoinitiators can be readily spectrally broadened into the long‐wavelength UV–visible regions of the spectrum. The results obtained suggest that 5‐arylthianthrenium salts are potential replacements for now available triarysulfonium salt photoinitiators in many applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3465–3480, 2002     

Living cationic polymerization of vinyl ethers and styrene derivatives: Design of initiating systems based on added salts with halogen anions

This paper overviews three living cationic polymerization systems (for styrene, p-methoxystyrene, and isobutyl vinyl ether) that are, in common, featured by: (i) specifically in nonpolar solvents, the use of the hydrogen halide/metal halide initiating systems (HX/MX_n; X: I, Br, Cl; MX_n: ZnX₂, SnCl₄), which generate a living growing carbocation stabilized by a nucleophilic counteranion (X⁻…MX_n); (ii) specifically in polar solvents, the use of externally added ammonium salts (nBu₄N⁺Y⁻; Y⁻: I⁻, Br⁻, Cl⁻), which permit the generation of living species from HX/MX_n by providing nucleophilic halogen anions Y⁻, either the same as or different from the halogen X⁻ in HX.     

Photoinitiated cationic polymerization by dialkyl-4-hydroxyphenylsulfonium salts

On irradiation with ultraviolet light, dialkyl-4-hydroxyphenylsulfonium salts undergo reversible photodissociation and in the process generate ylids and Brønsted acids. When the anions are nonnucleophilic in character, as, for example, BF₄^?, AsF₆^?, PF₆^?, and SbF₆^?, the strong acid which is produced is capable of initiating cationic polymerization. The polymerization of several monomers was carried out to demonstrate the general applicability of these new photoinitiators.     

The discovery and development of onium salt cationic photoinitiators

The story of the discovery and development of onium salt photoinitiators for cationic polymerization is chronicled. The chemistry of the synthesis of these compounds is outlined, and the mechanisms of their initiation are discussed briefly. Among the most useful of these types of photoinitiators are diaryliodonium and triarylsulfonium salts, which are used widely for photoinduced cationic crosslinking reactions. From the very beginning, onium salt photoinitiated cationic polymerizations have found use in a multitude of practical applications. Specifically discussed in this article are the use of onium salts in coatings, adhesives, printing inks, release coatings, stereolithography, holographic recording, photocurable composites, and microelectronic photoresists. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4241–4254, 1999     

Dye-sensitized photoinitiated cationic polymerization. The system: Perylene–triarylsulfonium salts

Perylene has been found to photosensitize the photolysis of triarylsulfonium salts at wavelengths from 390 to 475 nm. Using perylene in combination with various triarylsulfonium salt photoinitiators, the photoinduced cationic polymerizations of cyclohexene oxide and 2-chloroethyl vinyl ether have been demonstrated using light of these wavelengths.     

Novel dialkylaminoalkyl- and dialkylaminoalcoxi-benzophenones as photoinitiators of polymerization. I. Photochemical characteristics and radical efficiencies

The behavior of the nonconjugated aminated benzophenones—4-[2′-N,N-(diethylamino)ethoxy]benzophenone (E4), 2-[2′-N,N-(diethylamino)ethoxy]-4-methoxybenzophenone (E2), and 4-N,N-dimethylaminomethylbenzophenone (DM)—as photoinitiators of MMA polymerization has been studied and the results compared with those obtained with the conjugated aminobenzophenone 4-N,N-dimethylamino-4′-isopropyl-benzophenone (CU—MI). Photoreduction behavior of these compounds in various solvents in the presence and absence of MMA has been also examined. The order of the polymerization reaction with respect to monomer and initiator concentrations has been investigated; values of initiation quantum yield (Φ_i), K_p/K^1/2_t and efficiencies of the different radicals have also been determined. Similar polymerization rates (R_p) of methyl methacrylate (MMA) were found when E4 and CU-MI were used as photoinitiators under the same range of absorbed irradiation intensity. This fact results from a compensation between the higher rate of E4 radical production (n-π* transition type) and the greater reactivity of the radicals generated from CU-MI.     

Dithiadiazolium salts as initiators for the cationic ring-opening polymerization of tetrahydrofuran

Mono-, bis- and tris-(1,3,2,4-dithiadiazolium) salts [R-(CNSNS ⁺)_n]_n+[AsF^-₆]_n (R = aryl, n = 1, 2, 3) were found to initiate the cationic ring-opening polymerization of tetrahydrofuran (THF) at room temperature to give clear gels from which the pure polymer was precipitated. 1,3,2,4-Dithiadiazolium cations associated with the hard [AsF₆]^- anion thus constitute a new class of cationic polymerization initiators. The poly(THF) formed by initiation with 1,3,2,4-dithiadiazolium cation was characterized by gel permeation chromatography, infrared spectrophotometry, and ¹³C-NMR spectroscopy. Number-average molecular weights of 198 700 g mol^-1 (polydispersity 1.96) and 190 000 g mol^-1 (polydispersity 1.61) were obtained using [PhCNSNS ] [AsF₆] and [C₆H₃-1,3,5-(CNSNS )₃][AsF₆]₃, respectively, as initiators. The use of multifunctional dithiadiazolium salts as initiators suggests that they may be useful in the preparation of starburst and dendritic polymers. © 1992 John Wiley & Sons, Inc.     

Synthesis and Characterization of Bis(Isopropenylphenoxy)Alkanes and Bis(Vinylphenoxy)Alkanes: Two Classes of Highly Reactive,Photopolymerizable Monomers

Abstract

A novel and facile synthesis of difunctional, aromatic vinyl ether analogs is reported. These materials, which are conveniently prepared by the condensation of 4-acetoxystyrene or 4-isopropenylphenyl acetate with α, ω-dihaloalkanes in the presence of base, can be cationically polymerized using diaryliodonium or triarylsulfonium salts as photoinitiators to produce crosslinked polymers. Relative reactivities of the monomers toward cationic polymerization were studied using differential scanning photocalorimetry. The thermal stabilities of the polymers resulting from the photopolymerization of the difunctional, aromatic vinyl ether analogs were studied using thermogravimetric analysis.     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

Synthesis and study of iodonium borate salts as photoinitiators

Iodonium butyltriphenylborate salts (A I⁺ Ar′Ph₃B⁻ R), (Bu) were found to be more efficient than iodonium tetraphenylborate salts (RPh) when used as photoinitiators for the polymerization of acrylates. Relative photodecomposition rates were also different. It was found from a study of the photoreaction of iodonium borate salts with a model monomer, methyl methacrylate, that iodonium butyltriphenylborate salts simultaneously produce a butyl radical from the borate anion and an aryl radical from the iodonium cation upon irradiation. Both radicals initiate polymerization. Iodonium tetraphenylborate salts were found to release an aryl radical, but only from the iodonium cation. Iodonium borate salts exhibit strong absorption below 300 nm with a tail absorption above 400 nm. Thus, iodonium butyltriphenyl borate salts are efficient photoinitiators even when used with visible light. When a photosensitizer such as 5,7-diiodo-3-butoxy-6-fluorone is employed, iodonium butyltriphenylborate salts are rendered much more efficient for visible light photopolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1667–1677, 1998     

Novel cationically polymerizable propenyl and vinyl ethers derived from renewable sources

The preparation of several novel mono- and dipropenyl and divinyl ethers derived from renewable starting materials is described using simple, straightforward synthetic methods. Utilizing real-time infrared spectroscopy, the reactivity of the monomers in photoinitiated cationic polymerization was studied employing diaryliodonium and triarylsulfonium salts as photoinitiators. The monomers were shown to undergo very rapid cationic photopolymerization. © 1994 John Wiley & Sons, Inc.     

Effect of the Counterion on the Cationic Polymerization Rate of Ethylene Oxide by Trityl Salts

The cationic polymerization of ethylene oxide by trityl salts (BF₄ ^?, SbCl₆ ^?, AsF₆ ^?, and PF₆ ^? as counterions) in nitrobenzene at different temperatures has been studied. The kinetic analysis was carried out by use of an automatic manometer, and it showed that the polymerization rate constant depends neither on the counterion type nor on the initial initiator concentration. These facts allowed us to conclude that macrocations and macroion pairs have the same reactivity.     

Noncoordinating anions in carbocationic polymerization

The initiation and catalysis of isobutylene polymerization from several new metallocene and nonmetallocene initiator-catalysts that contain the noncoordinating anions (NCA), B(C₆F₅)₄⁻ and RB(C₆F₆)₃⁻, is reported. Application of these initiator-catalysts is extended to styrenics and vinyl ethers. The NCA does not contribute to termination and can be used in low concentrations compared with conventional Lewis acids. These qualities provide for isobutylene polymerizations that yield low M_n oligomers or high M_n polymer, dependent upon the initiator and polymerization conditions. Mechanistic aspects of initiation, transfer and termination as well as the participation of adventitious water are considered for each class of initiator-catalyst. The influence of the NCA on the stereoregularity of cationic styrene polymerization is also considered. NCAs do not cause the stereospecific carbocationic polymerization of styrene. We suggest that under conditions not conducive to carbocationic polymerization, NCA/metallocenes mediate the coordination polymerization of styrene. © 1997 John Wiley & Sons, Inc.     

Can halogen bond energy be reliably estimated from electron density properties at bond critical point? The case of the (A)nZ—Y•••X− (X,Y = F,Cl, Br) interactions

Relationships between the Y•••X bond critical point (BCP) properties or the Y•••X distance and the halogen bond interaction energy were analyzed in detail by theoretical methods for the series of structures [(A)_nZ—Y•••X]⁻ (X,Y = F, Cl, Br; totally 441 structures). No relationship was found for the whole set of structures or for the series [(A)_nZ—F•••X]⁻, [(A)_nZ—Cl•••X]⁻, and [(A)_nZ—Br•••X]⁻. The interaction energies may be roughly estimated from the BCP properties for the series [(A)_nZ—Y•••F]⁻, [(A)_nZ—Y•••Cl]⁻, and [(A)_nZ—Y•••Br]⁻ as well as for [(A)_nZ—Y•••X]⁻ (when (A)_nZ is variable, X and Y are constant) with the mean absolute deviation values 2.04-4.38 kcal/mol. The corresponding recommended relationships are provided and they are significantly different from the popular dependencies deduced previously for other types of noncovalent interactions. Tremendous effect of the computational method and basis set on the relationships under analysis was discovered. Computational results clearly indicate that, for practical purposes, the E_int(BCP property) dependencies should be established not simply for each global type of interactions (hydrogen bond, halogen bond, chalcogen bond, etc.) but for each combination of the first and second order atoms taking into account also the computational method and basis set.     

Redox cationic polymerization: The diaryliodonium salt/ascorbate redox couple

Strong Brønsted acids are produced on reduction of diaryliodonium salts containing anions of the type BF₄^?, AsF₆^?, PF₆^?, SbF₆^? by ascorbic acid and its derivatives in the presence of catalytic amounts of copper salts. The cationic polymerizations of cyclohexene oxide, tetrahydrofuran, and s-trioxane were studied using the diaryliodonium salt/ascorbate redox couple.     

Synthesis and study of a novel hybrid UV photoinitiator: p-benzoyldiphenyliodonium hexafluorophosphate (PhCOPhI+PhPF)

A novel hybrid photoinitiator, p-benzoyldiphenyliodonium hexafluorophosphate (PhCOPhI⁺PhPF⁻₆), was synthesized, characterized, and studied. It absorbs UV light not only below 300 nm, but above 300 nm as well. When exposed to UV light, it undergoes an asymmetrical photocleavage to produce cation-radicals and radicals which could induce cationic and radical polymerizations respectively. Compared with the simple iodonium salt PhI⁺PhPF⁻₆, and bimolecular sensitization system PhCOPh/PhI⁺PhPF⁻₆, the covalently bonded photosensitization system PhCOPhI⁺PhPF⁻₆ is much more efficient as a photoinitiator. Oxygen has a small negative effect on the cationic polymerization photoinitiated by PhCOPhI⁺PhPF⁻₆, while isopropanol has a small positive influence only in argon atmosphere. © 1996 John Wiley & Sons, Inc.     

Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Stack by Stack: From the Free Cyclopentadienylgermanium Cation Via Heterobimetallic Main-Group Sandwiches to Main-Group Sandwich Coordination Polymers

Heterobimetallic cationic sandwich complexes [M(μ-Cp)M′Cp]⁺ of group 13 (M=Ga, In) and group 14 (M′=Ge, Sn) elements have been prepared as [WCA]⁻ salts (WCA=Al(OR^F)₄; OR^F=OC(CF₃)₃). Their molecular structures include free apical gallium or indium atoms. The sandwich complexes were formed in the reactions of [M(HMB)]⁺[WCA]⁻ (HMB=C₆Me₆) with the free metallocenes [M′Cp₂]. Their structures are related to known stannocene and stannocenium salts; the unprecedented germanium analogues, namely the free germanocenium cation [GeCp]⁺ and the corresponding triple-decker complex cation [CpGe(μ-Cp)GeCp]⁺, are described herein. By variation of the reaction conditions, these sandwich complexes can be transformed into the group 13/14 mixed cationic coordination polymer [{In(HMB)(μ-SnCp₂)}_n][WCA]_n. This polymeric chain motif was also successfully replicated by the synthesis of complexes [{Ga/In(HMB)(μ-FeCp₂)}_n][WCA]_n containing FeCp₂ as a bridging ligand.     

Ion conductive poly(ethylene oxide-dimethyl siloxane) copolymers

A series of poly(ethylene oxide-dimethyl siloxane) copolymers, — [SiMe₂O(CH₂CH₂O)_n]_m — (n = 2, 3, 4, 5, 6.4, 8.7, 13.3), were synthesised by the reaction of polyethylene glycol with dimethyl dimethoxy/diethoxysilane. Corresponding ion-conductive polymers were prepared by complexing these copolymers with salts (sodium tetrafluoroborate or ammonium adipate). The highest conductivity of these systems at room temperature was 3 × 10⁻⁴ S cm⁻¹ and 6 × 10⁻⁵ S cm⁻¹, respectively. The glass transition temperature of these copolymers is reported and is seen to be dependent on the length of the ether units. The effects of siloxane content, salt concentration, and temperature on the conductivity are discussed. © 1996 John Wiley & Sons, Inc.