Effect of a π-donor on the radical bulk polymerization of methyl methacrylate

Bulk polymerizations of methyl methacrylate (MMA) at 60°C initiated with 2,2′-azoisobutyronitrile are influenced by the presence of an organic π-donor such as tetrathiafulvalene (TTF). Upon addition of TTF, the ratio of weight- to number-average molecular weights M̄_w/M̄_n are significantly reduced and the thermal stability of the poly(methyl methacrylate) samples is increased. Kinetic investigations indicate that TTF acts as a retarder on the polymerization mechanism.     

Highly heterotactic polymerization of methacrylates — Higher order stereoregulation and stereochemical significance

A combination of tert-butyllithium (t-BuLi) and bis(2,6-di-t-butylphenoxy)methylaluminium (MeAI(ODBP)₂) was found to be an efficient initiator for heterotactic living polymerization of certain alkyl methacrylates in toluene at low temperatures. The polymerization of methyl methacrylate (MMA) with t-BuLi/MeAI(ODBP)₂ (AI/Li=5 mol/mol) in toluene at −78°C gave heterotactic-rich poly(methyl methacrylate) (PMMA) with narrow molecular weight distributions (MWDs) (heterotactic triad fraction mr = 68%, ratio of weight- to number-average molecular weights M̄w/M̄n = 1.06-1.17). Other alkyl methacrylates also gave heterotactic polymers under the same conditions; in particular, ethyl and butyl methacrylates gave polymers with heterotactic triad fractions of 87%. The highest triad heterotacticity of 91.6% was obtained for the polymerization of ethyl methacrylate at −95°C. Some characteristic features of this stereospecific polymerization were discussed based on the polymerization results combined with other structural information of the polymer such as chain-end stereostructure and stereosequence distribution in the main chain.     

A new method for the polymerization of methyl methacrylate

Dialkyl iodomethylmalonates in the presence of tetrabutylammonium iodide initiate the polymerization of methyl methacrylate, but not of methyl acrylate or acrylonitrile. Typically, at 60°C in 1,3-dimethyltetrahydro-2-1H-pyrimidone (DMPU) as the solvent, poly(methyl methacrylate (PMMA)) is obtained in the number-average molecular weight range of 2 000 to 8 000, the molecular weight distribution being fairly narrow (ratio of weight- to number-average molecular weights M̄_w/M̄_n 1.2–1.3).     

Polymerization of Methyl Methacrylate Initiated with Organomanganate Reagents

Organomanganate reagents [R₃Mn]^–Li⁺ (R = Bu, Me) were found to polymerize methyl methacrylate in the presence of potassium tert‐butylate. A conversion of the tacticity of the resulting poly(methyl methacrylate)s from heterotactic (mr = 54%) to isotactic (mm = 58%) was observed upon changing the R group of the initiator from Bu to Me. The addition of triisobutylaluminium was found to efficiently control M̄_w and M̄_w/M̄_n of the resulting polymers.     

Effect of tetraalkylammonium salts on the tacticity of poly(methyl methacrylate), 1. Initiation by ethyl α-lithioisobutyrate

The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of ethyl α-lithioisobutyrate (α-LiEtIB)/quaternary ammonium salts (QAS) in toluene and tetrahydrofuran/toluene (vol. ratio 75/25) at −60°C. It was found that the tacticity of PMMA strongly depends on size and shape of QAS. A highly isotactic polymerization in toluene was observed, when using the system α-LiEtIB/trimethylhexadecylammonium bromide. The initiator system α-LiEtIB/tetrahexylammonium chloride produces polymers with a high (>50%) syndiotactic content and relatively low polydispersity. The influence of QAS on the mode of polymerization is due to specific salt effect resulting from the cation exchange reaction, from the participation of the bulky substituent in the primary solvation shell, and ionic aggregation between the growing anion, Q⁺ and LiX.     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

Effect of the mixture t - BuCl/SnCl4 on the cationic polymerization of isobutylene

The polymerizations of isobutylene initiated with the system tert-butyl chloride (t-BuCl)/SnCl₄ and carried out in CH₂Cl₂ at −20°C and −78°C were investigated. The results obtained demonstrate that the presence of t-BuCl in the polymerizing system gives rise to a PIB product with a distinctly bimodal MWD. The higher-molecular weight (HMW) PIB, M̄_n = 20000, I=M̄_w/M̄_n ∼ 2.5, is the result of existence of the protogenic initiation with residual water in the reaction system. The lower-molecular weight (LMW) PIB, M̄_n < 600, M̄_w/M̄_n ≤ 1.4, is the product of polymerization initiated presumably with a complex t-BuCl-SnCl₄-H₂O. To elucidate the reaction mechanism of the polymerization initiated with the complex, a series of similar isobutylene polymerizations using the initiation system 2,5-dichloro-2,5-dimethylhexane (DDH)/SnCl₄ was run and the oily LMW PIB samples were investigated by ¹H-NMR. A new polymerization mechanism describing the role of DDH and t-BuCl is suggested.     

Narrow-polydispersity polystyrene/poly[styrene-co-(butyl methacrylate)] block copolymers by an N-oxyl mediated free radical polymerization process

Polystyrene/poly[styrene-co-(butyl methacrylate)] block copolymers with controlled molecular weights and with polydispersities generally below M̄_w/M̄_n = 1,45 and partially as low as M̄_w/M̄_n = 1,19 were synthesized by a free radical bulk copolymerization using a 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)-capped polystyrene macroinitiator. The influence of the macroinitiator concentration on the block copolymerization was studied. The polymerization rates are independent of the macroinitiator concentration and are close to that of thermally self-initiated styrene/butyl methacrylate copolymerizations showing the important role of self-initiation for N-oxyl mediated free radical polymerizations.     

Highly stereospecific protonation of stereoregular living PMMA anions with several alcohols

Living and highly isotactic poly(methyl methacrylate) (PMMA) anion (M̄n = 2.5 × 10³) prepared with t-C₄H₉MgBr as an initiator was protonated with phenol in toluene at −78°C. The reaction was stereospecific toward meso addition, and the meso/racemo ratio at the chain-end of the resultant polymer was 89/11. Addition of 1,4-dioxane to the living isotactic PMMA anion in toluene at −78°C remarkably reduced the viscosity of the system, and protonation of the PMMA anion with phenol in the presence of 1,4-dioxane enhanced the meso-specificity to 94%. On the other hand, the protonation reaction of the living syndiotactic PMMA anion (M̄n = 2.5 × 10³), which was generated by t-C₄H₉Li/(n-C₄H₉)₃Al in toluene at −93°C, with t-butanol was found to be 97% racemo-specific. These highly stereospecific protonation reactions of the stereoregular PMMA anions were in contrast to the protonation of the anions with methanol or benzyl alcohol which was almost non-stereospecific.     

Tetraalkylammonium salts as additives in anionic polymerization of methyl methacrylate

The anionic polymerization of methyl methacrylate was carried out in the presence of t-BuOK/Quaternary ammonium salt (QAS) and α-lithio-ethylisobutyrate/QAS in toluene and THF. Seven QAS and one quaternary phosphonium salt of different size and shape were used as modifiers. With the aid of the model system alkali picrate/QAS, it was found that the interaction between the picrate salt and QAS in toluene does not proceed as a pure cation exchange reaction. Two types of adducts were distinguished: Initiator/QAS with a very long hydrocarbon chain (>C₁₂) promote isotactic placement, while the adducts t-BuOK/QAS with two or more bulky substituents produce a highly syndiotactic polymer with high conversion and comparatively low polydispersity in pure toluene.     

Reverse atom transfer radical polymerization of methyl acrylate using AIBN as the initiator under heterogeneous conditions

Reverse atom transfer radical polymerization of methyl acrylate in the presence of a conventional radical initiator (2,2′-azoisobutyronitrile, AIBN) in bulk was successfully implemented via a new polymerization procedure. The system first reacts at 65–70°C for ten hours, then polymerizes at 100°C. Various mole ratios of AIBN to Cu^IICl₂ were used in this work, all of which result in a well-controlled radical polymerization with high initiation efficiency and narrow molecular weight distribution, i.e., the polydispersity is as low as M̄_w/M̄_n = 1.36.     

Living radical polymerization of methyl methacrylate with a zerovalent nickel complex,Ni(PPh3)

A zerovalent nickel complex, Ni(PPh₃)₄, induced living radical polymerization of methyl methacrylate (MMA) in conjunction with an organic bromide as an initiator [R–Br: CCl₃Br, (CH₃)₂C(CO₂Et)Br, (CH₃)₂C(COPh)Br] in the presence of Al(Oi-Pr)₃ additive. The molecular weight distributions were narrow (M̄_w/M̄_n ∼ 1.2) throughout the reactions, and the number-average molecular weights (M̄_n) increased in direct proportion to monomer conversion. In contrast, the polymers obtained with CCl₄ in place of R–Br had broader MWDs (M̄_w/M̄_n > 2). The Al(Oi-Pr)₃ additive should be added for the smooth polymerizations of MMA to occur, similarly to those with a divalent nickel bromide, NiBr₂(PPh₃)₂. The Ni(PPh₃)₄-mediated living polymerization apparently proceeds via the activation of the C Br bond from the initiators R Br, assisted by the redox reaction of the complex between Ni(0) and Ni(I) species. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3003–3009, 1999     

A novel group transfer polymerization of 1-trimethylsiloxy-benzocyclobutene via hetero Diels-Alder reaction

A novel group transfer polymerization via hetero-Diels-Alder reaction is described. When 1-trimethylsiloxybenzocyclobutene ( 1 ) was treated with a catalytic amount of p-anisaldehyde (4-methoxybenzaldehyde) and TASF (tris(dimethylamino)sulfonium difluorotrimethylsilanide) at room temperature for 0.5 h, poly[1,2-phenylene-1-(trimethylsiloxy)ethylene] was obtained quantitatively. The number-average molecular weight of the polymer was M̄_n = 2000 and the molecular weight distribution was narrow (ratio of weight-to number-average molecular weights M̄_w/M̄_n = 1.18). Structural characteristics suggested a polymerization mechanism involving isomerization of 1 to o-quinodimethane and successive hetero-Diels-Alder reaction leading to poly[1,2-phenylene-1-trimethylsiloxy ethylene]. The living-like nature of the polymerization was supported by a monomer addition experiment in which the molecular weight increased according to the increase of the added monomer.     

A kinetic study of the polymerization of pure meta-divinylbenzene and pure para-divinylbenzene

The kinetics of the polymerization of pure meta-divinylbenzene (DVB) and pure para-divinylbenzene at 70°C have been studied in the presence of toluene and 2-ethylhexanoic acid. The apparent rate constant ratios (k_p/k_t)^1/2 for these systems have been calculated. meta-Divinylbenzene polymerizes at a higher rate than the para-isomer in both toluene and 2-EHA, and the polymerization rates of meta-DVB and para-DVB before the gel point were both higher in the presence of 2-EHA than in toluene. The monomer conversion at the visual gel point is higher for para-DVB than for meta-DVB. The gel point has also been determined indirectly by size exclusion chromatography, and these results are consistent with the gel times observed visually. The conversion of pendant vinyl groups during the polymerization has been determined by bromination. It is found that the homopolymers of poly(para-DVB) have a substantially higher content of pendant vinyl groups than poly(meta-DVB) both during and at the end of the polymerization. The molecular weight distribution (MWD) prior to gelation has been determined by size exclusion chromatography (SEC). Weight average (M̄_w); and number average (M̄_n) molecular weight prior to gelation and of the sol fractions after gelation have also been measured by SEC. There are larger fractions of high molecular weight polymers prior to gelation, when the polymerization was run in the presence of toluene, than in 2-EHA, mainly due to the differences in solvating power of the two diluents. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3345–3359, 1999     

Basic ionic liquid/FeCl3·6H2O as an efficient catalyst for AGET ATRP of methyl methacrylate

A basic ionic liquid, 1‐butyl‐3‐methyl imidazolium hydroxide ([Bmim]OH), was synthesized and used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of methyl methacrylate in bulk and solution, using FeCl₃ · 6H₂O as the catalyst, ethyl 2‐bromoisobutyrate as the initiator, vitamin C (Vc) as the reducing agent, and tetrabutylammonium bromide or tetra‐n‐butylphosphonium bromide as the ligand. Catalytic amount of [Bmim]OH could enhance the polymerization rate and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.3–1.4). The nature of controlled/“living” free radical polymerization in the presence of basic ionic liquid was further confirmed by chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ethylene polymerizations with novel tantalum(V) aminopyridinato complex/MAO systems

The use of two kinds of tantalum(V) aminopyridinato complexes, bis(2-benzylaminopyridinato)trichlorotantalum(V) and trichlorobis[2,6-di(phenylamino)pyridinato-N,N′]-tantalum(V), activated by methylaluminoxane was studied in polymerization of ethylene. The activities of these homogeneous catalyst systems are comparable to those of metallocenes. The weight-average molecular weights (M̄_w) of the produced polyethylenes are between 60 000 and 200 000 and M̄_w/M̄_n ≈ 2.     

Ring-opening polymerization of chloromethylthiirane with SO42−/TiO2/Nd3+ as initiator

A new type of solid superacid (SO₄²⁻/TiO₂/Nd³⁺) was used for the ring-opening polymerization of chloromethylthiirane (CMT). TiO₂ · H₂O immersed in a sulfuric acid solution containing Nd³⁺ ions and calcined at 600°C gave the solid superacid for initiating the polymerization of CMT. The effects of polymerization temperature and amount of the initiator on the CMT polymerization were studied. Poly(CMT) obtained has higher molecular weight (M̄_w = 52 000) than ever reported.     

Polymerization of ethene initiated with a mixture of siloxane-bridged mono- and dinuclear zirconocenes

In the polymerization of ethene cocatalyzed with modified methylaluminoxane, the catalyst activities of the siloxane-bridged dinuclear zirconocenes, tetramethyldisiloxanediylbis(cyclopentadienylindenylzirconium dichloride) ( 3 ) and hexamethyltrisiloxanediylbis(cyclopentadienylindenylzirconium dichloride) ( 4 ) were lower than that obtained with the siloxane-bridged mononuclear zirconocene, tetramethyldisiloxanediyldicyclopentadienyldimethylzirconium ( 1 ). On the other hand, weight-average molecular weight M̄_w and ratio of weight- to number-average molecular weights M̄_w/M̄_n of polyethene (PE) obtained with 3 or 4 were higher than those of PE obtained with 1. For a binary mixture of 1/3 or 1/4 , it was found that the obtained PE exhibits a bimodal molecular weight distribution for an appropriate composition of the mixed zirconocenes. M̄_w/M̄_n of PE could be adjusted by changing the relative concentrations of the two zirconocenes.     

General matrix formula for the weight-average molecular weights of crosslinked polymer systems

On the basis of the first-order Markovian statistics, we propose a general matrix formula for the weight-average molecular weight of crosslinked polymer systems, explicitly given by M̄_w = M̄_w,0 + WX₀ (I − X)⁻¹ S_f . This equation is valid for both step and chain-growth polymerizations, including those in a nonequilibrium state irrespective of the reactor types used. In the context of the present theory, the onset of gelation is simply stated as a point at which the largest eigenvalue of the matrix X reaches unity (i.e., det( I − X ) = 0). The present theory provides a unified point of view for various types of gelling systems. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2423–2433, 1998     

Living cationic polymerization of p-alkoxystyrenes by free ionic species

In contrast to the common view, living cationic polymerization of p-methoxy- and p-t-butoxystyrenes proceeded in polar solvents such as EtNO₂/CH₂Cl₂ mixtures, and involvement of free ionic growing species therein was examined. For example, the two alkoxystyrenes were polymerized with the isobutyl vinyl ether-HCl adduct/ZnCl₂ initiating system at −15°C in such polar solvents as CH₂Cl₂ or EtNO₂/CH₂Cl₂ [1/1 (v/v)], as well as toluene. The number average molecular weight (M̄_n) of the polymers increased in direct proportion to the monomer conversion, even after sequential monomer addition, and the molecular weight distribution (MWD) stayed very narrow throughout the reaction. In addition, the M̄_n agreed with the calculated values, assuming that one adduct molecule generates one living polymer chain. In these polar media the addition of a common ion salt retarded the polymerization, indicating that dissociated ionic species are involved in the propagating reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3694–3701, 1999