Reactions of p-Nitrophenyloxirane with Amines Containing Fragments with Bicyclic Skeleton

Reactions of p-nitrophenyloxirane with amines containing fragments with bicyclic skeleton of norbornene, norbornane, epoxynorbornane (stereoisomeric exo- and endo-5-aminomethylbicyclo[2.2.1]hept-2-enes, N-benzyl-endo-5-aminomethylbicyclo[2.2.1]hept-2-ene, endo-5-(2-aminoethyl)bicyclo[2.2.1]hept-2-ene, stereoisomeric exo- and endo-2-aminomethylbicyclo[2.2.1]heptanes, 2-(1-aminoethyl)bicyclo[2.2.1]heptane, exo-5-aminomethyl-exo-2,3-epoxybicyclo[2.2.1]heptane) were investigated. The aminolysis of p-nitrophenyloxirane occurred regioselectively according to Krasusky rule as was proved by ¹H and ¹³C NMR data. As shown by ¹H and ¹³C NMR spectroscopy the oxyalkylation product obtained from N-benzyl-endo-5-aminomethylbicyclo[2.2.1]hept-2-ene was composed of two diastereomers originating from the presence of a chiral nitrogen atom in the rear part of the rigid bicyclic skeleton. New products of amino groups transformation in the molecules of hydroxyamines were obtained by reaction with p-methylbenzoyl chloride and p-nitrophenylsulfonyl chloride. Regioselectivity of the attack of electrophilic reagents on the nitrogen in the hydroxyamines was confirmed by IR and ¹H NMR spectra of the products. The data on pharmacological activity tests of N-2-hydroxyethyl(p-nitrophenyl)-5-aminomethylbicyclo[2.2.1]hept-2-ene are reported.     

1H-NMR Spectra of Cyclohexa-1,4-dienes and Cyclohexenes Annellated to Bicyclo[2.2.1]hept-2-enes. The Inter-Ring Homoallylic H,H Coupling Constants as Stereochemical Probes

The 360-MHz-¹H-NMR spectra of cyclohexa-1,4-dienes and cyclohexenes annellated to bicyclo[2.2.1]hept-2-enes and 7-oxabicyclo[2.2.1]hept-2-enes show inter-ring homoallylic coupling constants between the bridgehead protons of the bicyclo[2.2.1]heptenes and the exo-protons of the allylic methylene groups (0.8 ± 0.15 Hz for bicyclo[2.2.1]hept-2-enes; 0.8–1.4 Hz for 7-oxabicyclo[2.2.1]hept-2-enes). Contrastingly, the corresponding coupling between the bridgehead protons and the endo-protons is absent. The observed values are compared with those calculated by the INDO and CNDO/2 methods and discussed in the light of the bicyclo[2.2.1]hept-2-ene bond π-anisotropy. Vicinal as well as intra-ring homoallylic coupling constants are consistent with a small puckering of the cyclohexa-1,4-diene rings toward the endo-face. The allylic exo-methylene protons are more deshielded than the endo-protons independent of the nature of the substituents, the nature of the bridges, and the degree of unsaturation of the annellated systems. These results constitute a probe for the configuration of cyclohexa-1,4-dienes and cyclohexenes annellated to these bicyclic skeletons.     

Structural analysis of three methyl N-phosphorylated 5,6-dihydroxy-2-azabicyclo[2.2.1]heptane-3-carboxylates

Both exo and endo isomers of (±)-methyl N-diphenylphosphoryl-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate and (±)-methyl N-diphenylphosphoryloxy-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate were dihydroxylated with OsO₄. The unexpected formation of (±)-methyl 5,6-dihydroxy-N-diphenylphosphoryl-2-azabicyclo[2.2.1]heptane-3-endo-carboxylate from (±)-methyl N-diphenylphosphoryloxy-2-azabicyclo[2.2.1]hept-5-ene-3-endo-carboxylate is discussed based on NMR analyses and experimental observations. The two N-diphenylphosphoryl dihydroxybicycles are analyzed in terms of their crystalline structure by X-ray crystallography.     

Heterogenous Oxidation of [2.2.1] Bridged Bicyclic Alkenes with KMnO4-CuSO4.5H2O: An Alternative Ozonolysis

Seven [2.2.1] bridged alkenes were cleaved to the corresponding dialdehyde products by neutral heterogenous oxidation with KMnO₄-CuSO₄.5H₂O. While endo, endo-dimethyl bicyclo[2.2.2]oct-5-ene-2,3-dicarboxylate, [2.2.2] bridged alkene, gave the corresponding α-hydroxy ketone, endo, endo-dimethyl bicyclo[3.2.2]non-8-ene-6,7-dicarboxylate afforded a diketone product.     

Regioselective Electrophilic Additions of Bicyclo[2.2.n]alk-2-enes Controlled by Remote Epoxide Functions

The electrophilic additions of 2-nitrobenzenesulfenyl chloride to (1RS,2SR,4RS)-spiro[bicyclo[2.2.1]hept-5-ene-2,2′-oxirane] ( 12 ) and (1RS,2SR,4RS)-spiro[bicyclo[2.2.2]oct-5-ene-2,2′-oxirane] ( 14 ) were not regioselective under condition of kinetic control. However, good regioselectivity was observed for the addition of 2-nitro-benzenesulfenyl chloride to (1RS,2RS,4RS)-spiro[bicyclo[2.2.1]hept-5-ene-2,2′-oxirane] ( 13 ), giving (1RS,2SR,4SR,5RS,6RS)-6-exo-(2-nitrophenylthio)spiro[bicyclo[2.2.1]heptane-2.2′-oxirane]-5-endo-yl chloride ( 24 ) and for the exo addition to (1RS,2RS.4RS)-spiro[bicyclo[2.2.2]oct05-ene-2,2′-oxirane] ( 15 ), giving preferntially (1RS,2SR,4SR,5RS,6 RS)-6-exo-(2-nitrophenylthio) spiro[bicyxlo[2.2.2]octane-2,2′-oxirane]-5-endo-yl chloride ( 30 ). The facial selectivity (electrophilic exo vs. endo attack on the bucyclic alkene) depended on the relative configuration of the spiroepoxide ring in the bicyclo[2.2.2]octenes 14 and 15 . The exo-epoxide 14 was attacked preferentially (6:1) on the endo face by sulfenyl whereas exo attack was preferred (7:2) in the case of the endo-epoxide 15 . No products resulting from transannular ring expansion of the spiro-epoxide moieties could be detected.     

New exo/endo selectivity observed in monohydrolysis of dialkyl bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylates

New monohydrolysis reactions of several exo or endo dimethyl or diethyl bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylates showed higher selectivity toward monohydrolyses of exo-carboalkoxy groups, although the reaction centers are located away from the norbornene rings.     

Synthesis of (+)-1,3:2,5-dianhydroviburnitol ((+)-(1R,2R,3S,5R,6S)-4,7-dioxatricyclo[3.2.1.03,6]octan-2-ol)

Epoxidation of (?)-(1R,2R,4R)-2-endo-cyano-7-oxabicyclo[2.2.1]hept-5-en-2-exo-yl acetate ((?)-5) followed by saponification afforded (+)-(1R,4R,5R,6R)-5,6-exo-epoxy-7-oxabicyclo[2.2.1]heptan-2-one ((+)-7). Reduction of (+)-7 with diisobutylaluminium hydride (DIBAH) gave (+)-1,3:2,5-dianhydroviburnitol ( = (+)-(1R,2R,3S,4R,6S)-4,7-dioxatricyclo[3.2.1.0^3,6]octan-2-ol; (+)-3). Hydride reductions of (±)-7 were less exo-face selective than reductions of bicyclo[2.2.1]heptan-2-one and its derivatives with NaBH₄, AlH₃, and LiAlH₄ probably because of smaller steric hindrance to endo-face hydride attack when C(5) and C(6) of the bicyclo-[2.2.1]heptan-2-one are part of an exo oxirane ring.     

Pd(II)-catalyzed vinylic polymerization of norbornene and copolymerization with norbornene and copolymerization with norbornene carboxylic acid esters

The vinylic polymerization of norbornene and its copolymerization with norbornene carboxylic acid methyl esters were investigated. Norbornene was polymerized by us using di-μ-chloro-bis-(6-methoxybicyclo[2.2.1]hept-2-ene-endo-5σ,2π)-palladium(II) as catalyst. The polymerization time can be decreased by a factor of 100000 by activation of the catalyst with methylaluminoxane (MAO). With this palladium catalyst activated by MAO, 140 t of norbornene can be polymerized per mol palladium per h. This catalyst system was much more active than [Pd(CH₃CN)₄](BF₄)₂ ( I ). The polymerization of norbornene by (6-methoxybicyclo[2.2.1]hept-2-ene-endo-5σ,2π)-palladium(II) tetrafluoroborate was also possible but it was not as fast as the polymerization by Pd catalysts activated with MAO. We were also able to obtain copolymers of norbornene and 5-norbornene-2-carboxylic acid methyl ester (exo/endo = 1/4 or 2/3) containing between 15 and 20 mol-% ester units. The copolymerization of norbornene and 2-methyl-5-norbornene-2-carboxylic acid methyl ester (exo/endo = 7/3) was faster than the copolymerization mentioned before. In contrast the homopolymerization of 2-methyl-5-norbornene-2-carboxylic acid methyl ester was 10 times slower than that of 5-norbornene-2-carboxylic acid methyl ester (exo/endo = 1/4).     

Cyclodimerization of 1-(Dimethoxyniethyl)-5,6-dimethylidene-7-oxa-bicyclo[2.2.1]hept-2-ene Induced by Nonacarbonyldiiron. Crystal Structure of (1RS, 2SR, 3RS, 4RS, 4aRS, 9aSR)- Tricarbonyl[C, 2,3, C-η-(1,4-epoxy-1,5-bis(dimethoxymethyl)-2,3-dimethylidene-1,2,3,4,4a,9,9a,10-octahydroanthracene)]iron

The transition-metal-carbonyl-induced cyclodimerization of 5,6-dimethylidene-7-oxabicyclo[2.2.1]hept-2-ene is strongly affected by substitution at C(1) While 5,6-dimethylidene-7-oxabicyclo[2.2.1]hept–2-ene-l-methanol ( 7 ) refused to undergo [4 + 2]-cyclodimerization in the presence of [Fe₂(CO)⁹] in MeOH, 1-(dimethoxymethyl)-5,6-di-methylidene-7-oxabicyclo[2.2.1]hept-2-ene ( 8 ) led to the formation of a 1.7:1 mixture of ‘trans’ ( 19, 21, 22 ) vs. ‘cis’ ( 20, 23, 24 ) products of cyclodimerization together with tricarbonyl[C, 5,6, C-η-(l-(dimethoxymethyl)-5,6-di-methylidenecyclohexa-1,3-diene)]iron ( 25 ) and tricarbonyl[C,3,4, C-η-(methyl 5-(dimethoxymethyl)-3,4-di-methylidenecyclohexa-1,5-diene-l-carboxylate)]iron ( 26 ). The structures of products 19 and of its exo ( 21 ) and endo ( 22 ) [Fe(CO)₃(1,3-diene)]complexes) and 20 (and of its exo ( 23 ) and endo (24) (Fe(CO)₃(1,3-diene)complexes) were confirmed by X-ray diffraction studies of crystalline (1RS, 2SR, 3RS, 4RS, 4aRS, 9aSR)-tricarbonyl[C, 2,3, C-η-(1,4-epoxy-1,5-bis(dimethoxymethyl])-2,3-dimethylidene-1,2,3,4,4a,9,9a,10-octahydroanthracene)iron ( 21 ). In the latter, the Fe(CO)₃(1,3-diene) moiety deviates significantly from the usual local C_s symmetry. Complex 21 corresponds to a ‘frozen equilibrium’ of rotamers with η-alkyl, η³-allyl bonding mode due to the acetal unit at the bridgehead centre C(1).     

Copper(I)- and Copper(II)-catalyzed Diels-Alder Additions of α-Substituted Acrylonitrile to Furan. The Synthesis of 7-Oxa-bicyclo[2.2.1]hept-5-en-2-one

The difficult Diels-Alder additions of α-acetoxy- and α-chloroacrylonitrile to furan can be run at 20–35° and atmospheric pressure in the presence of CuCl. Cu(BF₄) · 6 H₂O, Cu(OOCCH₃)₂ · H₂O or cupric tartrate · 3H₂O. Under kinetic control, the exo-carbonitrile adducts 2 and 8 , respectively, are favoured. Saponification of the 2endo-acetoxy-7-oxabicyclo[2.2.1]hept-5-ene-2exo-carbonitrile ( 2 ) furnished the 7-oxabicyclo[2.2.1]hept-5-en-2-one ( 4 ). Basic hydrolysis of the adducts ( 8 + 9 ) of α-chloroacrylonitrile to furan and its 5exo, 6exo-isopropylidenedioxy derivatives did not give the corresponding ketones, the carboxamides 14 + 15 and 16 + 17 , respectively, were isolated.     

Mass spectrometry in stereochemical problems. 6 — The case of mono and di-substituted norbornanes

The mass spectrometric behaviour of pairs of stereoisomeric mono- and di-substituted norbornanes, namely bicyclo[2.2.1]heptane-2-endo- and -exo-carboxylic acid, methyl bicyclo[2.2.1]heptane-2-endo- and -exo-carboxylate, 2-exo-acetamidobicyclo[2.2.1]heptane-2-endo- and 2-endo-acetamidobicyclo[2.2.1]heptane-2-exo-carboxylic acid and methyl 2-exo-acetamidobicyclo[2.2.1]heptane-2-endo- and 2-endo-acetamido-bicyclo[2.2.1]heptane-2-exo-carboxylate was studied in detail with particular emphasis on characterization of the stereoisomers. The fragmentation patterns, studied with the aid of mass-analysed ion kinetic energy spectrometry, were supported by semi-empirical MO–SFC calculations, performed using the AM1 method included in the AMPAC program.     

Synthesis and Stereostructure of 3-Amino-5- and -6-hydroxybicyclo[2.2.1]heptane-2-carboxylic Acid Diastereomers

All-endo-3-amino-5-hydroxybicyclo[2.2.1]heptane-2-carboxylic acid and two epimers of 3-amino-6-hydroxybicyclo[2.2.1]heptane-2-carboxylic acid were prepared via 1,3-oxazine or γ-lactone intermediates by the stereoselective functionalization of endo-3-aminobicyclo[2.2.1]hept-5-ene-2-carboxylic acid derivatives. Their structures were proved by IR and NMR spectroscopy, with the use of HMQC, HMBC, DEPT, and DIFFNOE techniques.     

Synthesis of methanethial s-oxide (sulfine) and alkanethial s,s-dioxides by fluorodesilylation. Stereochemistry of their cyclopentadiene diels-alder adducts

Fluorodesilylation of trimethylsilylmethanesulfinyl chloride 4 in the presence of cyclopentadiene gives 2-thiabicyclo[2.2.1]hept-5-ene endo-2-oxide,5; in a like manner 1-trimethylsilylalkanesulfonic anhydrides afford endo- and exo-3-alkyl-2-thiabicyclo[2.2.1]hept-5-ene 2,2-dioxides, with the endo isomer predominating. Sulfine and alkyl sulfenes are invoked.     

The Carbonyl Group as Homoconjugated Electron-Releasing Substituent. Regioselective electrophilic additions at bicyclo[2.2.1]hept-5-en-2-one,bicyclo[2.2.2]oct-5-en-2-one,and derivatives

In CHCl₃, CH₃CN, or AcOH, benzeneselenenyl chloride (PhSeCl), bromide (PhSeBr), and acetate (PhSeOAc), 2-nitrobenzenesulfenyl chloride (NO₂C₆H₄SCl), and 2,4-dinitrobenzenesulfenyl chloride ((NO₂)₂C₆H₃SCl) added to bicyclo[2.2.1]hept-5-en-2-one ( 5 ) in an. anti fashion with complete stereo- and regioselectivity, giving adducts 20–24 in which the chloride, bromide, or acetoxy substituent (X) occupies the endo position at C(6) and the Se- or S-substituent (E) the exo position at C(5), The addition 5 + (NO₂)₂C₆H₃SCl→ 24 was accompanied by the formation of (1RS, 2RS)-2-(2,4-dinitrophenylthio)cyclopent-3-ene-l-acetic acid ( 25 ). The latter was the major product in AcOH containing LiClO₄. The additions of PhSeCl and PhSeBr to bicyclo[2.2.2]oct-5-en-2-one ( 6 ) were less stereoselective (proportion of exo vs. endo mode of electrophilic attack was ca. 3:1) but highly regioselective gazing adducts 27/28 and 29/30 , respectively, the regioselectivity being the same as that of the electrophilic additions of 5 . The reaction of PhSeCl with a 4:1 mixture of 2-exo-chloro- and 2-endo-chlorobicyclo[2.2.1]hept-5-ene-2-carbonitriles ( 12 ) was slower than addition 5 + PhSeCl; it gave adducts 31/32 (4:1) in which the PhSe moiety occupies the exo position at C(6) and the Cl atom the endo position at C(5). The addition of PhSeCl to 2-chlorobicyclo[2.2.1]oct-5-ene-2-carbonitriles ( 13 ) was very slow and gave adducts with the same regioselectivity as 12 + PhSeCl, but opposite with that of reactions of the corresponding enones 5 and 6 . PhSeX (X = Cl, Br, OAc) added to 2-cyanobicyclo[2.2.1]hept-5-en-2-yl acetates ( 14 ) with the same regioselectivity as 12 + PhSeCl. The additions of PhSeCl, PhSeBr, NO₂C₆H₄SCl, and (NO₂)₂C₆H₃SCl to 2-(bicyclo[2.2.1]hept-5-en-2-ylidene)propanedinitrile ( 49 ) were not regioselective, showing that a dicyanomethylidene function is not like a carbonyl function when homoconjugated with a π system. The results are in agreement with predictions based on MO calculations suggesting that a carbonyl group homoconjugated with an electron-deficient centre can behave as an electron-donating, remote substituent because of favourable n(CO)?σC(1), C(2)?p(C(6) hyperconjugative interaction.     

Reactions of Bi-, Tri-, and tetracyclic amines with succinic anhydride

Succinic anhydride reacted with cage-like amines {bicyclo[2.2.1]hept-5-en-exo-and-endo-2-yl-methanamines, 2-(bicyclo[2.2.1]hept-5-en-endo-2-yl)ethanamine, exo-5,6-epoxybicyclo[2.2.1]heptan-exo-2-yl-methanamine, tetracyclo[6.2.1.1^3,6.0^2,7]dodec-9-en-endo-4-ylmethanamine, 1-(bicyclo[2.2.1]heptan-2-yl)ethanamine, and 4-azatricyclo[5.2.1.0^2,6]dec-8-ene} to give the corresponding amido acids having a cage-like fragment. The latter were converted into carboximides by the action of hexamethyldisilazane in boiling benzene in the presence of zinc(II) chloride and then into epoxy derivatives. The structure of the newly synthesized compounds was confirmed by IR and NMR spectroscopy.     

Stereochemical studies. 81. Saturated heterocycles. 69 . Preparation of methylene-bridged 3,1-benzoxazines, 3,1-benzoxazin-2-ones and 3,1-benzoxazine-2-thiones

3-exo-Aminobicyclo[2.2.1]hept-5-ene-2-exo-carboxylic acid and ethyl 3-endo-aminobicyclo[2.2.1]heptane-2-endo-carboxylate ( 6 ) were reduced with lithium aluminum hydride to the corresponding bicyclic aminoalcohols 3 and 4 . These and the saturated endo-endo and exo-exo N-methylaminoalcohols 16 and 22 , respectively, were converted to methylene-bridged tetrahydro- ( 11 ) and hexahydro-3,1-benzoxazin-2-ones 12, 17, 23 and 3,1-benzoxazin-2-thiones 13, 14, 18, 24 . The exo-exo 3 and endo-endo 4 aminoalcohols were cyclized by means of ethyl arylimidates to tricyclic dihydro-1,3-oxazines 7a-d, 8a-d . The structures were confirmed by ir, ¹H and ¹³C nmr spectroscopy.     

Synthesis and Stereostructure of 3-Amino-5- and -6-hydroxybicyclo[2.2.1]heptane-2-carboxylic Acid Diastereomers

Summary. All-endo-3-amino-5-hydroxybicyclo[2.2.1]heptane-2-carboxylic acid and two epimers of 3-amino-6-hydroxybicyclo[2.2.1]heptane-2-carboxylic acid were prepared via 1,3-oxazine or γ-lactone intermediates by the stereoselective functionalization of endo-3-aminobicyclo[2.2.1]hept-5-ene-2-carboxylic acid derivatives. Their structures were proved by IR and NMR spectroscopy, with the use of HMQC, HMBC, DEPT, and DIFFNOE techniques.     

Cage-like amines in the synthesis and oxidation of camphor-10-sulfonic acid amides

Reactions of bicyclo[2.2.1]hept-5-en-exo- and -endo-2-ylmethanamines, exo-5,6-epoxybicyclo-[2.2.1]hept-exo-2-ylmethanamine, 1-(bicyclo[2.2.1]hept-2-yl)ethanamine, and 1-(1-adamantyl)ethanamine with camphor-10-sulfonyl chloride in chloroform in the presence of triethylamine gave the corresponding sulfonamides having two cage-like fragments. Stereoisomeric N-(bicyclo[2.2.1]hept-5-en-2-ylmethyl)camphor-10-sulfonamides were oxidized with peroxyphthalic acid generated in situ from phthalic anhydride and 50% hydrogen peroxide. The exo stereoisomer was thus converted into the corresponding 5,6-epoxy derivative, while the endo isomer gave rise to 4-(7,7-dimethyl-2-oxobicyclo[2.2.1]hept-1-ylmethyl)-4-azatricyclo[4.2.1.0^3,7]-nonan-exo-2-ol (substituted azabrendane). The structure of the synthesized camphor-10-sulfonamides was confirmed by IR and ¹H and ¹³C NMR spectra with the use of homo- (COSY) and heteronuclear ¹H-¹³C correlation techniques (HMQC, HMBC). Heterocyclization of sulfonamides of the norbornene series was also simulated by quantum-chemical calculations at the PM3 and BHandHLYP/6-31G(d) levels of theory.     

Reaction of bicyclo[2.2.1]hepta-2,5-diene with the arenesulfenamide—phosphorus(v) oxohalide system: chemo-, regio-, and steroselectivity

The chemo-, regio- and stereoselectivities of electrophilic sulfenylation of bicyclo[2.2.1]hepta-2,5-diene with arenesulfenamides activated by phosphorus(v) oxohalides were studied. The ratio of the products of endo- to exo-attack of the diene by the electrophilic species depends on the solvent nature. The proportions of the products formed upon addition to one double bond and upon homoallylic participation of the second double bond depend on solvent polarity, the nature of the halogen, the substituents in the sulfenamide benzene ring, and on the reaction time. In addition, the formation of mixed adducts was proven for the reaction carried out in acetonitrile and the formation of disulfenylation products was found in the reaction with excess sulfenylating reagent. Isomerization of exo-3-arylthio-endo-2-halobicyclo[2.2.1]hept-5-enes to the products formed with homoallylic participation of the second double bond, exo-5-arylthio-endo-3-halotricyclo[2.2.1.0^2,6]heptanes, was shown to be possible.     

Reactivity of 5-<Emphasis Type="Italic">endo</Emphasis>-hydroxy-4-azatricyclo[5.2.1.0<Superscript>2,6</Superscript>]dec-8-en-3-ones and their isomerization initiated by acids and bases

Study of isomerization of 5-endo-hydroxy-4-azatricyclo[5.2.1.0^2,6]dec-8-en-3-ones under the action of Lewis acids (MgBr₂, AlCl₃), CF₃COOH, and NaH showed that the optimum catalyst of the process was trifluoroacetic acid. In reaction of 4-benzyl-5-endo-hydroxy-4-azatricyclo-[5.2.1.0^2,6]dec-8-en-3-one with anhydrous AlCl₃ in benzene was unexpectedly isolated N-benzyl-3-(diphenylmethyl)bicyclo[2.2.1]hept-5-ene-2-carboxamide. A convenient method was developed for the preparation of 5-exo-alkoxy-4-alkyl(aryl)-4-azatricyclo[5.2.1.0^2,6]dec- 8-en-3-ones.