聚醚树枝体－聚丙烯酸嵌段共聚物的水溶液自组装行为

应用UV－Vis、荧光、光物理探针、动态激光光散射和透射电镜(TEM)方法研究了聚醚树枝体与聚丙烯酸两亲嵌段共聚物(Dendr,PE-PAA)在水溶液中分子自组装行为。实验结果表明通过聚醚树枝体嵌段的疏水作用,易缔合形成聚集体,具有很低(10^-6～10^-7mol·L^-1)的临界缔合浓度(cac)。透过电镜观察到聚集体具有双层膜结构的球状、单室囊泡。临界缔合浓度(cac)以及聚集体的大小对枝状体的代数(Gi)及线性体的聚合度(n)具有明显的依赖关系。     

Amphiphilic cationic block copolymers via controlled free radical polymerization

N-oxyl terminated vinylbenzyl chloride macromonomers, available via controlled free radical polymerization, were used to synthesize AB-block copolymers of vinylbenzyl chloride and styrene with low polydispersity and different block lengths and block length ratios. The vinylbenzyl chloride blocks were quantitatively converted into cationic polyelectrolytes by reactions with tertiary amines. The micellization of the synthesized amphiphilic cationic block copolymers was investigated using different techniques such as static light scattering, ultracentrifugation and size exclusion chromatography.     

Adsorption and aggregation of cationic amphiphilic polyelectrolytes on silica

The adsorption of two cationic amphiphilic polyelectrolytes, which are copolymers of two charged monomers, triethyl(vinylbenzyl)ammonium chloride and dimethyldodecyl(vinylbenzyl)ammonium chloride (which is the amphiphilic one) with different contents of amphiphilic groups (40% (40DT) and 80% (80DT)), onto the hydrophilic silica-aqueous solution interface has been studied by in situ null ellipsometry and tapping mode atomic force microscopy (AFM). Adsorption isotherms for both polyelectrolytes were obtained at 25 degrees C and at different ionic strengths, and the adsorption kinetics was also investigated. At low ionic strength, thin adsorbed layers were observed for both polyelectrolytes. The adsorption increases with polymer concentration and reaches, in most cases, a plateau at a concentration below 50 ppm. For the 80DT polymer, at higher ionic strength, an association into aggregates occurs at concentrations at and above 50 ppm. The aggregates were observed directly by AFM at the surface, and by dynamic light scattering in the solution. The adsorption data for this case demonstrated multilayer formation, which correlates well with the increase in viscosity with the ionic strength observed for 80DT.     

Adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers at the silica-water interface

The adsorption of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) and poly(ethylene oxide)-b-poly(gamma-methyl-epsilon-caprolactone) copolymers in aqueous solution on silica and glass surfaces has been investigated by flow microcalorimetry, small-angle neutron scattering (SANS), surface forces, and complementary techniques. The studied copolymers consist of a poly(ethylene oxide) (PEO) block of M(n) = 5000 and a hydrophobic polyester block of poly(epsilon-caprolactone) (PCL) or poly(gamma-methyl-epsilon-caprolactone) (PMCL) of M(n) in the 950-2200 range. Compared to homoPEO, the adsorption of the copolymers is significantly increased by the connection of PEO to an aliphatic polyester block. According to calorimetric experiments, the copolymers interact with the surface mainly through the hydrophilic block. At low surface coverage, the PEO block interacts with the surface such that both PEO and PCL chains are exposed to the aqueous solution. At high surface coverage, a dense copolymer layer is observed with the PEO blocks oriented toward the solution. The structure of the copolymer layer has been analyzed by neutron scattering using the contrast matching technique and by tapping mode atomic force microscopy. The experimental observations agree with the coadsorption of micelles and free copolymer chains at the interface.     

Pathways of polymeric vesicle formation

Polymeric vesicle formation is dictated by the mutual diffusion of water into the bulk block copolymer and vice versa. The hydration of three poly(ethylene oxide)-co-poly(butylene oxide) copolymers with different molecular weights has been monitored both macroscopically (confocal laser scanning microscopy) and microscopically (small-angle X-ray scattering). Both methods have revealed that the amphiphilic block copolymers swell in water following two qualitatively different growth regimes. Initially, water and copolymer diffuse into each other following a subdiffusional growth as the result of a molecular-level arrangement of the amphiphilic membranes that comprise the swollen copolymer. After a critical time, which is exponential in polymer molecular weight, the amphiphilic membranes reach their equilibrium morphology and as a consequence the growth starts to follow Fickian diffusion. The complex hydration kinetics dictate the phases formed at the interface between the amphiphilic copolymer and water. Upon hydration of simple amphiphiles, the amphiphilic film swells and the concentration gradient at the interface with water gradually drops to zero. This strongly affects the complex driving forces that control vesicle formation. Indeed, to form vesicles, an energy barrier has to be overcome, and therefore a constant concentration gradient is required. We show, by enhancing the hydration kinetics via an ac field, how the interface concentration gradient is kept constant and the magnitude of this gradient dictates the final size of the vesicles.     

Supramolecular formation of triblock copolymers in polar/nonpolar solvents

Triblock copolymers could form supramolecules in either polar or nonpolar solvents at appropriate concentration and temperature ranges or in the presence of additives. The association properties and the structure of supramolecules of PEO-PPO-PEO and PPO-PEO-PPO (PEO and PPO refer to poly(oxyethylene) and poly(oxypropylene), respectively) triblock copolymers in xylene and/or water were investigated by using light scattering, small-angle neutron scattering, and small-angle X-ray scattering. The association process of aqueous solution or water-rich ternary systems was entropy driven and temperature played an important role. The additive, e.g., water in the oil-rich ternary system, played a very important role on the micellization of PEO-PPO-PEO, e.g., Pluronic L64, in xylene. The micelles had a core-shell structure and the micellar shell was rather heavily solvated. At high copolymer concentrations, large aggregates with a lamellar structure was formed and the amount of large aggregates increased with increasing copolymer concentration before gel formation.     

New biodegradable amphiphilic block copolymers of epsilon-caprolactone and delta-valerolactone catalyzed by novel aluminum metal complexes. II. Micellization and solution to gel transition

In our previous study [J. Yang, L. Jia, L. Yin, J. Yu, Z. Shi, Q. Fang, A. Cao, Macromol. Biosci. 2004, 4, 1092.], new biodegradable copolymers of diblock methoxy poly(ethylene glycol)-block-poly(epsilon-caprolactone) and methoxy poly(ethylene glycol)-block-poly(delta-valerolactone), and triblock poly(epsilon-caprolactone)-block-poly(ethylene glycol)-block-poly(epsilon-caprolactone) and poly(delta-valerolactone)-block-poly(ethylene glycol)-block-poly(delta-valero-lactone) bearing narrow molecular weight distributions and well-defined block architectures were reported to be prepared with our original aluminum metal complex templates. This work will continue to report new investigations on their water solubility, and reversible thermal responsive micellization and solution to gel transition in distilled water. Among the new synthesized copolymers (P1-P23), seven diblock or triblock samples (P3, P6, P7, P11, P12, P19, and P21) with higher hydrophilic building block populations were revealed to be water soluble under ambient temperature. By means of UV spectrophotometer attached with a thermostat, important parameters as critical micellization mass concentrations (CMCs) and critical micellization temperatures (CMTs) were characterized for these new amphiphile dilute aqueous solution with the aid of an lipophilic organic dye probe of 1,6-diphenyl-1,3,5-hexatriene (DPH). Furthermore, the critical gelation temperatures (CGTs) were simultaneously investigated for these water-soluble block copolymers via a tube tilting method. It was found that the CMC, CMT, and CGT were strongly affected by the population and nature of the hydrophobic building blocks, and a higher hydrophobicity of the new amphiphilic block copolymer finally led to lower CMC and CMT, and higher CGT. In addition, the salts of KBr and NaCl were found to play as a salt-out effect on the solution to gel transition for the diblock P6 and triblock P11, exhibiting an interesting tunable gelation temperature close to 35-42 degrees C. These results will pave new possibility for the synthesized block structural amphiphiles as potential biomaterials to be applied in vivo.     

Association behavior of fluorine-containing and non-fluorine-containing methacrylate-based amphiphilic diblock copolymer in aqueous media

Fluorine-containing amphiphilic block copolymers, poly(sodium methacrylate)-block-poly(nonafluorohexyl methacrylate) (NaMAm-b-NFHMAn) (m:n = 61:12, 72:33, 64:57), and the corresponding non-fluorine-containing amphiphilic block copolymer, poly(sodium methacrylate)-block-poly(hexyl methacrylate) (NaMAm-b-HMAn) (m:n = 64:10, 69:37, 67:50), were synthesized. Both polyNaMA-b-polyNFHMA and polyNaMA-b-polyHMA formed micelles above critical micelle concentrations, (cmc's), around 3 x 10(-5) to 1 x 10(-4) mol/L, while neither polymer decreased surface tension of aqueous solutions. The size and shape of the micelles were examined by dynamic light scattering, small-angle neutron scattering, and small-angle X-ray scattering. PolyNaMA-b-polyHMA appeared to form only spherical micelles, while polyNaMA-b-polyNFHMA with a long NFHMA segment formed both spherical and rodlike micelles. The micelles of fluorine-containing block copolymers were obviously larger than those of non-fluorine-containing block copolymers with the same chain length and the same hydrophilic/hydrophobic chain ratio. The fluorine-containing block copolymer selectively solubilized fluorinated dye into the water phase when a mixture of decafluorobiphenyl and 2,6-dimethylnaphthalene was added to the micelle solution.     

两亲性嵌段共聚物PS-b-PMAA的合成与胶束化行为研究

利用原子转移自由基聚合法(ATRP)得到了分子量可控、分子量分布接近1.1的聚苯乙烯-b-聚甲基丙烯酸叔丁酯(PS-b-PtBMA)嵌段共聚物, 进而在酸性条件下由水解反应得到了两亲性的聚苯乙烯-b-聚甲基丙烯酸 (PS-b-PMAA)嵌段共聚物．用GPC, FTIR和¹H-NMR等对产物的分子量和组成进行了表征．使PS-b-PMAA在选择性溶剂中进行自组装, 通过激光光散射和透射电子显微镜研究了影响其胶束化行为的因素与胶束形态, 并初步探讨了胶束形成的机理, 发现通过控制嵌段共聚物的链段长度之比可得到空心球形的高分子胶束．     

Self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers in aqueous solution

The associative behavior of monodisperse diblock copolymers consisting of a hydrophilic poly(ethylene oxide) block and a hydrophobic poly(epsilon-caprolactone) or poly(gamma-methyl-epsilon-caprolactone) block has been studied in aqueous solution. Copolymers have been directly dissolved in water. The solution properties have been studied by surface tension, in relation to mesoscopic analyses by NMR (self-diffusion coefficients), transmission electron microscopy, and small-angle neutron and X-ray scattering. The experimental results suggest that micellization occurs at low concentration (approximately 0.002 wt %) and results in a mixture of unimers and spherical micelles that exchange slowly. The radius of the micelles has been measured (ca. 11 nm), and the micellar substructure has been extracted from the fitting of the SANS data with two analytical models. The core radius and the aggregation number change with the hydrophobic block length according to scaling laws as reported in the scientific literature. The poly(ethylene oxide) blocks are in a moderately extended conformation in the corona, which corresponds to about 25% of the completely extended chain. No significant modification is observed when poly(gamma-methyl-epsilon-caprolactone) replaces poly(epsilon-caprolactone) in the diblocks.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Self-assembly of block copolymer micelles in an ionic liquid

Four amphiphilic poly((1,2-butadiene)-block-ethylene oxide) (PB-PEO) diblock copolymers were shown to aggregate strongly and form micelles in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]). The universal micellar structures (spherical micelle, wormlike micelle, and bilayered vesicle) were all accessed by varying the length of the corona block while holding the core block constant. The nanostructures of the PB-PEO micelles formed in an ionic liquid were directly visualized by cryogenic transmission electron microscopy (cryo-TEM). Detailed micelle structural information was extracted from both cryo-TEM and dynamic light scattering measurements, with excellent agreement between the two techniques. Compared to aqueous solutions of the same copolymers, [BMIM][PF(6)] solutions exhibit some distinct features, such as temperature-independent micellar morphologies between 25 and 100 degrees C. As in aqueous solutions, significant nonergodicity effects were also observed. This work demonstrates the flexibility of amphiphilic block copolymers for controlling nanostructure in an ionic liquid, with potential applications in many arenas.     

Stimuli‐responsive amphiphilic PDMAEMA‐b‐PLMA copolymers and their cationic and zwitterionic analogs

In this work, the synthesis and characterization of novel amphiphilic diblock copolymers of poly(2‐dimethylamino ethyl methacrylate)‐b‐poly(lauryl methacrylate), PDMAEMA‐b‐PLMA, using the reversible addition‐fragmentation chain transfer (RAFT) polymerization technique, are reported. The diblocks were successfully derivatized to cationic and zwitterionic block polyelectrolytes by quaternization and sulfobetainization of the PDMAEMA block, respectively. Furthermore, their molecular and physicochemical characterization was performed by using characterization techniques such as NMR and FTIR, size exclusion chromatography, light scattering techniques, and transmission electron microscopy. The structure of the diblock micelles, their behavior, and properties in aqueous solution were investigated under the effect of pH, temperature, and ionic strength, as PDMAEMA and its derivatives are stimuli‐responsive polymers and exhibit responses to variations of at least one of these physicochemical parameters. These new families of stimuli‐responsive block copolymers respond to changes of their environment giving interesting nanostructures, behavioral motifs, and properties, rendering them useful as nanocarriers for drug delivery and gene therapy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 598–610     

Synthesis,surface property,micellization and pH responsivity of fluorinated gradient copolymers

In this work, fluorinated nonamphiphilic gradient copolymers of tert‐butyl acrylate (tBA) and 2,2,3,3,4,4,4‐heptafluorobutyl methacrylate (HFBMA) [poly(tBA‐grad‐HFBMA)] were first synthesized by semibatch atom transfer radical copolymerization of tBA and HFBMA. Their hydrolysis at acidic conditions led to amphiphilic poly(acrylic acid‐grad‐HFBMA). The chemical compositions and structures of these copolymers were characterized by proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography. Their surface properties were evaluated with water contact angle measurement and x‐ray photoelectron spectroscopy. The micellization behaviors of amphiphilic copolymer were also studied by transmission electron microscopy and dynamic light scattering. The results showed that the fluorinated and amphiphilic gradient copolymers could self‐assemble in a dilute solution to form aggregates of morphologies. Furthermore, the effect of pH on the aggregates was investigated to verify that the resulting gradient copolymers were to some extent pH sensitive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

Non-surface activity and micellization of ionic amphiphilic diblock copolymers in water. Hydrophobic chain length dependence and salt effect on surface activity and the critical micelle concentration

We reported previously (Macromolecules 2003, 36, 5321; Langmuir, 2004, 20, 7412) that amphiphilic diblock copolymers having polyelectrolytes as a hydrophilic segment show almost no surface activity but form micelles in water. In this study, to further investigate this curious and novel phenomenon in surface and interface science, we synthesized another water-soluble ionic amphiphilic diblock copolymer poly(hydrogenated isoprene)-b-sodium poly(styrenesulfonate) PIp-h2-b-PSSNa by living anionic polymerization. Several diblock copolymers with different hydrophobic chain lengths were synthesized and the adsorption behavior at the air/water interface was investigated using surface tension measurement and X-ray reflectivity. A dye-solubilization experiment was carried out to detect the micelle formation. We found that the polymers used in this study also formed micelles above a certain polymer concentration (cmc) without adsorption at the air-water interface under a no-salt condition. Hence, we further confirmed that this phenomenon is universal for amphiphilic ionic block copolymer although it is hard to believe from current surface and interface science. For polymers with long hydrophobic chains (more than three times in length to hydrophilic chain), and at a high salt concentration, a slight adsorption of polymer was observed at the air-water interface. Long hydrophobic chain polymers showed behavior "normal" for low molecular weight ionic surfactants with increasing salt concentration. Hence, the origin of this curious phenomenon might be the macroionic nature of the hydrophilic part. Dynamic light scattering analysis revealed that the hydrodynamic radius of the block copolymer micelle was not largely affected by the addition of salt. The hydrophobic chain length-cmc relationship was found to be unusual; some kind of transition point was found. Furthermore, very interestingly, the cmc of the block copolymer did not decrease with the increase in salt concentration, which is in clear contrast to the fact that cmc of usual ionic small surfactants decreases with increasing salt concentration (Corrin-Harkins law). These behaviors are thought to be the special, but universal, characteristics of ionic amphiphilic diblock copolymers, and the key factor is thought to be a balance between the repulsive force from the water surface by the image charge effect and the hydrophobic adsorption.     

Evidence of overcharging in the complexation between oppositely charged polymers and surfactants

We report on the complexation between charged-neutral block copolymers and oppositely charged surfactants studied by small-angle neutron scattering. Two block copolymers/surfactant systems are investigated, poly(acrylicacid)-b-poly(acrylamide) with dodecyltrimethylammonium bromide and poly(trimethylammonium ethylacrylate methylsulfate)-b-poly(acrylamide) with sodium dodecyl sulfate. Two two systems are similar in terms of structure and molecular weight but have different electrostatic charges. The neutron-scattering data have been interpreted in terms of a model that assumes the formation of mixed polymer-surfactant aggregates, also called colloidal complexes. These complexes exhibit a core-shell microstructure, where the core is a dense coacervate microphase of micelles surrounded by neutral blocks. Here, we are taking advantage of the fact that the complexation results in finite-size aggregates to shed some light on the complexation mechanisms. In order to analyze quantitatively the neutron data, we develop two different approaches to derive the number of surfactant micelles per polymer in the mixed aggregates and the distributions of aggregation numbers. With these results, we show that the formation of the colloidal complex is in agreement with overcharging predictions. In both systems, the amount of polyelectrolytes needed to build the core-shell colloids always exceeds the number that would be necessary to compensate the charge of the micelles. For the two polymer-surfactant systems investigated, the overcharging ratios are 0.66+/-0.06 and 0.38+/-0.02.     

Polyisobutylene-block-poly(methacrylic acid) diblock copolymers: self-assembly in aqueous media

Ionic amphiphilic diblock copolymer polyisobutylene-block-poly(methacrylic acid) (PIBx-b-PMAAy), with various lengths of nonpolar (x=25-75) and polyelectrolyte (y=170-2600) blocks, spontaneously dissolve in aqueous media at pH>4, generating macromolecular assemblies, the aggregation number of which depends on external stimuli (pH and ionic strength). Spherical micellar morphology with a compact core formed by the PIB blocks and a swollen corona built up from the PMAA blocks was deduced by cryogenic transmission electron microscopy. The micelles were further characterized by means of dynamic and static light scattering as well as small-angle neutron scattering. The critical micellization concentration, estimated by means of fluorescence spectroscopy with the use of pyrene as a polarity probe, is decisively determined by the length of the PIB block and is insensitive to changes in the length of the PMAA block.     

Conductive properties of TiO2/bacterial cellulose hybrid fibres

In this article, we report the first micellization study of amphiphilic copolymers composed of bacterial medium chain length poly(3-hydroxyalkanoates) (mcl-PHAs). A series of diblock copolymers based on fixed poly(ethylene glycol) (PEG) block (5000 g mol(-1)) and a varying poly(3-hydroxyoctanoate-co-3-hydroxyhexanoate) (PHOHHx) segment (1500-7700 g mol(-1)) have been synthesized using "click" chemistry. These copolymers self-assembled to form micelles in aqueous media. The influence of PHOHHx block molar mass on the hydrodynamic size and on the critical micelle concentration (CMC) has been studied using dynamic light scattering and fluorescence spectroscopy, respectively. With increasing PHOHHx length, narrowly distributed micelles with diameters ranging from 44 to 90 nm were obtained, with extremely low CMC (up to 0.85 mg/L). Cryogenic transmission electron microscopy (Cryo-TEM) showed that micelles took on a spherical shape and exhibited narrow polydispersity. Finally, the colloidal stability of the micelles against physiological NaCl concentration has been demonstrated, suggesting they are promising candidates for drug delivery applications.     

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.