Synthesis and absorption/emission properties of novel poly(silylenearylenevinylene)s

Polymerization of p-(dimethylsilyl)phenylacetylene in toluene at 25 and 80 °C with RhI(PPh₃)₃ catalyst afforded highly regio- and stereoregular poly(dimethylsilylene-1,4-phenylenevinylene)s [cis- and trans-poly( 1a )s] containing 98% cis- and 99% trans-vinylene moieties, respectively. The trans-type polymers exhibited redshifts and hyperchromic effects in the ultraviolet–visible spectrum as compared with the cis-type counterparts. Photoirradiation of cis- and trans-poly( 1a )s gave cis-rich mixtures at equilibrium states. The trans and cis polymers exhibited different emission properties, for example—trans polymer, emissn λ_max = 400 nm, quantum yield: 3.4 × 10⁻³ and cis polymer, emissn λ_max = 380 nm, quantum yield: 1.5 × 10⁻³. Besides poly( 1a ), poly(dimethylsilylenearylenevinylene)s containing biphenylene and phenylenesilylenephenylene units [poly( 3 )] were prepared. The extent of conjugation in these polymers decreased in the orders of biphenylene > phenylene > phenylenesilylenephenylene as well as trans-vinylene > cis-vinylene. The quantum yield of the trans-rich polymer with biphenylene moiety was fairly large and 0.15. Polyaddition of 1,4-bis(dimethylsilyl)benzene and three types of diethynylarenes (4,4′-diethynylbiphenyl, 2,7-diethynylfluorene, and 2,6-diethynylnaphthalene) catalyzed by RhI(PPh₃)₃ provided novel regio- and stereoregular polymers [poly( 6 )]. These polymers displayed blue light emission with high quantum yields (4–81%). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3615–3624, 2003     

Synthese substituierter Cyclononatetraene

Synthesis of Substituted Cyclononatetraenes In the course of an exploration of possible synthetic pathways to nonafulvenes, a series of 1-substituted cyclononatetraenes (CNT) 4b–1 have been prepared in yields of about 60%. Their structures follow from spectroscopic data as well as from the quantitative valence isomerisation to 1-endo-substituted cis-3a, 7a-dihydroindenes 8 . Both all-cis-CNT⁻ 1 and cis,cis,cis,trans-CNT⁻ 2 have been used as nucleophiles. Whereas 2 is normally more nucleophilic than 1 , the yield of cyclononatetraenes 4 prepared with 2 may be reduced due to by-products such as 9 and 10 .     

Harnessing Plasticity in an Amine-Borane as a Piezoelectric and Pyroelectric Flexible Film

We demonstrate that trimethylamine borane can exhibit desirable piezoelectric and pyroelectric properties. The material was shown to be able operate as a flexible film for both thermal sensing, thermal energy conversion and mechanical sensing with high open circuit voltages (>10 V). A piezoelectric coefficient of d₃₃≈10–16 pC N⁻¹, and pyroelectric coefficient of p≈25.8 μC m⁻² K⁻¹ were achieved after poling, with high pyroelectric figure of merits for sensing and harvesting, along with a relative permittivity of 6.3.     

Characterization and evaluation of commercial poly (vinylidene fluoride)‐g‐sulfonatedPolystyrene as proton exchange membrane

The possibility of developing low‐cost commercial grafted and sulfonated Poly(vinylidene fluoride) (PVDF‐g‐PSSA) membranes as proton exchange membranes for fuel cell applications have been investigated. PVDF‐g‐PSSA membranes were systematically prepared and examined with the focus of understanding how the polymer microstructure (degree of grafting and sulfonation, ion‐exchange capacity, etc) affects their methanol permeability, water uptake, and proton conductivity. Fourier transform infrared spectroscopy was used to characterize the changes of the membrane's microstructure after grafting and sulfonation. The results showed that the PVDF‐g‐PSSA membranes exhibited good thermal stability and lower methanol permeability. The proton conductivity of PVDF‐g‐PSSA membranes was also measured by the electrochemical impedance spectroscopy method. It was found that the proton conductivity of PVDF‐g‐PSSA membranes depends on the degree of sulfonation. All the sulfonated membranes show high proton conductivity at 92°C, in the range of 27 to 235 mScm⁻¹, which is much higher than that of Nafion212 (102 mScm⁻¹ at 80°C). The results indicated that the PVDF‐g‐PSSA membranes are particularly promising membranes to be used as polymer electrolyte membranes due to their excellent stability, low methanol permeability, and high proton conductivity.     

Conformational analysis,barriers to internal rotation,ab initio calculations and vibrational assignment of fluoroacetone

The infrared (3500-20 cm⁻¹) and Raman (3200-10 cm⁻¹) spectra have been recorded for gaseous and solid fluoroacetone (1-fluoro-2-propanone), CH₂FC(O)CH₃. Additionally, the Raman spectrum of the liquid has been recorded and qualitative depolarization values have been obtained. These data have been interpreted on the basis that the molecule exists predominantly in the cis (fluorine atom oriented cis to the methyl group) conformation in the vapor but for the liquid a second conformer having a trans orientation (fluorine atom oriented trans to the methyl group) is present. From a study of the Raman spectrum of the liquid at variable temperatures the trans conformation has been determined to be more stable than the cis form by 416 ± 54 cm⁻¹ (1.19 ± 0.15 kcal mol⁻¹) and is the only conformation present in the spectrum of the annealed solid. The asymmetric torsional fundamental for the more stable cis conformer has been observed in the far infrared spectrum of the gas at 69.6 cm⁻¹ with six accompanying hot band transitions proceeding to lower frequency. The corresponding mode for the high energy trans conformer is extensively overlapped but is distinguishable at ∼65 cm⁻¹. From these data the asymmetric torsional potential function governing internal rotation about the CC bond has been determined and the potential coefficients are: V₁ = 675 ± 2, V₂ = 991 ± 5, V₃ = 74 ± 1 and V₄ = 54 ± 2 cm⁻¹. The cis to trans and trans to cis barriers are 1332 ± 5 and 731 ± 5 cm⁻¹, respectively, with an enthalpy difference of 601 ± 8 cm⁻¹ (1.72 ± 0.02 kcal mol⁻¹). From ab initio calculations at the 3-21G and 6-31G* basis set levels optimized geometries for both the cis and trans conformers have been obtained and the potential surface governing internal rotation of the asymmetric top determined. The observed vibrational frequencies with their assignments for both the cis and trans conformers are compared to those from the ab initio calculations. All of these results are compared to the corresponding quantities for some similar molecules.     

An improved method for the polymerization of ethynylferrocene. Conducting properties of doped polyethynylferrocene

The catalytic activity of the [Rh(cod)Cl]₂ complex (cod  cis, cis-cyclo-octa-1,5-diene) with respect to the polymerization of ethynylferrocene (EFc) was examined. A good yield (about 80%) of polyethynylferrocene (PEFc) was obtained in benzene by addition of sodium hydroxide as co-catalyst. PEFc was insoluble in most organic solvents. The conductivity (s̀) of the undoped polymer is about 10⁻¹¹ ohm⁻¹ cm⁻¹; upon doping PEFc with iodine in tetrahydrofuran the conductivity can be increased to 10-100 ohm⁻¹ cm⁻¹. The influence of other doping agents was also examined.     

Molecular engineering of pyroelectric polysiloxane Langmuir-Blodgett superlattices: synthesis,film preparation and pyroelectric properties

A wide range of linear and cyclic polysiloxanes substituted with side chains containing carboxylic acid groups have been synthesized and characterized in terms of their Langmuir/Langmuir-Blodgett (LB) film properties and their pyroelectric activity. The effects on these properties of varying the degree of side-group substitution, the length of aliphatic side groups, the incorporation of polar aromatic side groups and the deposition conditions utilized during the preparation of multilayer assemblies have been investigated. These materials form stable Langmuir layers at the air-water interface which can be transferred onto substrates such as glass and aluminium-coated glass. The alternate layer LB deposition technique, in which each polysiloxane layer is co-deposited in an alternating stacking sequence with monolayers of a monomeric aliphatic amine compound, has been used to fabricate macroscopically polar films which display a temperature-dependent electric polarization, the ‘pyroelectric effect’. Data are presented here for both linear and cyclic substituted polymer backbones showing that both systems provide useful insight into the pyroelectric behaviour of organic materials. Trends in the relationships between the pyroelectric activity and (1) the chemical structure of the materials and (2) the structure of the acid/amine superlattice have been identified and indicate that the optimum pyroelectric coefficient is observed for a linear copolysiloxane compound substituted with a polar aromatic pendant side group. Indeed, the pyroelectric coefficient measured for this material is ∼10μCm⁻² K⁻¹ which is currently the highest value reported for an LB assembly to our knowledge.     

Die Kinetik der thermischen Cyclisierung von 2,6-Dimethyl-1, cis-3,5-heptatrien in der Gasphase

The kinetics of the thermal cyclization of 2,6-dimethyl-1, cis-3, 5-heptatriene to 1, 5, 5-trimethyl-1, 3-cyclohexadiene have been measured in the gas phase for temperatures ranging between 150.4 and 231.2°C. The observed reaction rates satisfy first order kinetics for pressures ranging between 2.5 and 25 torr. The reaction is homogeneous, as demonstrated by the insensitivity of the calculated rate constants towards a 13-fold variation in the surface to volume ratio of the reaction vessels used. The least squares regression analysis of the observed rate constants yields (with standard errors) log k_cycl. (s⁻¹) = (10.50 ± 0.11) − (31.81 ± 0,24)/θ, where θ equals 4.58 × 10⁻³ T (°K). The trans isomer is stable under the reaction conditions used. The intramolecular reaction proceeds via a 6-center cyclic transition state, involving a loss in entropy of ∼ 13.8 cal/°-mole (based on the transition state formulation for unimolecular reactions, assuming a transmission coefficient of unity). When compared with estimated and with reported activation parameters for the cyclization of 1, cis-3,5-hexatriene, this amounts to an additional loss of ∼ 4.5 e.u., and an increase in E_a by ∼ 2 kcal/mole. This is attributed to the additional steric repulsions in the transition state, primarily owing to the methyl group in 6-position.     

Rate constants for the gas-phase reaction of ozone with 1,2-disubstituted alkenes

The gas-phase reaction of ozone with eight 1,2-disubstituted alkenes has been investigated at ambient temperature (T = 286–296 K) and p = 1 atm. of air. The reaction rate constants, in units of 10⁻¹⁸ cm³ molecule⁻¹s⁻¹, are 144 ± 17 for cis-3-hexene, 157 ± 25 for trans-3-hexene, 89.8 ± 9.7 for cis-4-octene, 131 ± 15 for trans-4-octene, 114 ± 13 for cis-5-decene, ≥ 130 for trans-5-decene, 38.3 ± 5.0 for trans-2.5-dimethyl-3-hexene, and 40.3 ± 6.7 for trans-2.2-dimethyl-3-hexene. Substituent effects on alkene reactivity are examined. Cis-1,2-disubstituted alkenes are less reactive than the corresponding trans isomers. The 1,2-disubstituted alkenes that bear bulky substituents (substitution at the 3-carbon) are ca. 3 times less reactive than the corresponding n-alkyl substituted compounds. The atmospheric persistence of 1,2-disubstituted alkenes is briefly discussed. © 1996 John Wiley & Sons, Inc.     

Photo-oxidation of polymers without light: Oxidation of polybutadiene and an ABS polyblend with singlet oxygen

In recent years much evidence has been accumulated to implicate electronically excited oxygen (¹Δ_g) molecules as the agent responsible in photosensitized oxidations for the formation of allylic hydroperoxides from olefins and of endoperoxides from 1,3-dienes. Little regarding the mechanistic aspects of the photo-oxidative degradation of polybutadiene (PBD) is known, however. To determine if electronically excited oxygen (¹Δ_g) molecules can oxidize PBD, the ABS polyblend and standard samples of PBD's containing high trans, high cis, and high vinyl content were treated in homogeneous solution at low temperature with chemically produced singlet oxygen in situ. The source of the singlet oxygen was the triphenylphosphite-ozone adduct. Studies by spectroscopy, elemental analysis, viscosity determinations, and gel measurements showed only the cis- and the trans-PBD were susceptible to oxidation; no chain scission was involved in the attack of cis- and trans-PBD by singlet oxygen; the oxidation of the cis PBD involved the initial formation of hydroperoxides which on thermal decomposition yielded gel. The trans-PBD was found to oxidize but apparently by a mechanism different from that of cis-PBD. Initial singlet oxygen attack of ABS proceeds by oxidation of the PBD portion of the polyblend. It was also observed that when only a small amount of the double bonds in the cis-PBD polymer had been oxidized to hydroperoxides, subsequent thermal treatment of this sample resulted in gross structural changes in the whole polymer.     

Preparation and characterization of PVDF‐based blend membranes as polymer electrolyte membranes in fuel cells: Study of factor affecting the proton conductivity behavior

There is a huge demand especially for polyvinylidene fluoride (PVDF) and its copolymers to provide high performance solid polymer electrolytes for use as an electrolyte in energy supply systems. In this regard, the blending approach was used to prepare PVDF‐based proton exchange membranes and focused on the study of factor affecting the ir proton conductivity behavior. Thus, a series of copolymers consisting of poly (methyl methacrylate) (PMMA), polyacrylonitrile (PAN), and poly(2‐acrylamido‐2‐methyl‐l‐propanesulfonic acid) (PAMPS) as sulfonated segments were synthesized and blended with PVDF matrix in order to create proton transport sites in PVDF matrix. It was found that addition of PMMA‐co‐PAMPS and PAN‐co‐PAMPS copolymers resulted in a significant increase in porosity, which favored the water uptake and proton transport at ambient temperature. Furthermore, crystallinity degree of the PVDF‐based blend membranes was increased by addition of the related copolymers, which is mainly attributed to formation of hydrogen bonding interaction between PVDF matrix and the synthesized copolymers, and led to a slight decrease in proton conductivity behavior of blend membranes. From impedance data, the proton conductivity of the PVDF/PMMA‐co‐PAMPS and PVDF/PAN‐co‐PAMPS blend membranes increases to 10 and 8.4 mS cm⁻¹ by adding only 50% of the related copolymer (at 25°C), respectively. Also, the blend membranes containing 30% sulfonated copolymers showed a power density as high as 34.30 and 30.10 mW cm⁻² at peak current density of 140 and 79.45 mA cm⁻² for the PVDF/PMMA‐co‐PAMPS and PVDF/PAN‐co‐PAMPS blend membranes, respectively. A reduction in the tensile strength was observed by the addition of amphiphilic copolymer, whereas the elongation at break of all blend membranes was raised.     

Ab initio MO and TST calculations for the rate constant of the HNO+NO2→HONO+NO reaction

Potential-energy surfaces for various channels of the HNO+NO₂ reaction have been studied at the G2M(RCC,MP2) level. The calculations show that direct hydrogen abstraction leading to the NO+cis-HONO products should be the most significant reaction mechanism. Based on TST calculations of the rate constant, this channel is predicted to have an activation energy of 6–7 kcal/mol and an A factor of ca. 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ at ambient temperature. Direct H-abstraction giving NO+trans-HONO has a high barrier on PES and the formation of trans-HONO would rather occur by the addition/1,3-H shift mechanism via the HN(O)NO₂ intermediate or by the secondary isomerization of cis-HONO. The formation of NO+HNO₂ can take place by direct hydrogen transfer with the barrier of ca. 3 kcal/mol higher than that for the NO+cis-HONO channel. The formation of HNO₂ by oxygen abstraction is predicted to be the least significant reaction channel. The rate constant calculated in the temperature range 300–5000 K for the lowest energy path producing NO+cis-HONO gave rise to © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 729–736, 1998     

Zur Kenntnis des Kohlenstoffringes. 81. Mitteilung [1]. Acetolyse des 3,3,8,8-Tetramethyl-cyclodecyl-p-toluolsulfonates

Acetolysis of 3,3,8,8-tetramethyl-cyclodecyl p-toluenesulfonate yields 3,3,8,8-tetramethyl-trans-cyclodecene-(1) ( 6 ), 4,4,9,9-tetramethyl-cis-cyclodecene-(1) ( 4 ), and 4,4,9,9-tetramethyl-trans-cyclodecene-(1) ( 5 ). In each case 12 to 13 per cent of the product involves transannular hydride shifts. The rate constant k₂₅ = 4,35 · 10⁻⁵ s⁻¹ is approximately the same as for cyclodecyl p-toluenesulfonate. The reaction is discussed in terms of conformational analysis.     

Photoinduced switching in self-assembled multilayers of azobenzene-containing ionene polycations and anionic polyelectrolytes

Ultrathin molecular assemblies of new ionene polysoaps bearing azobenzene units in the main chain and anionic polyelectrolytes have been prepared upon electrostatic layer-by-layer adsorption on charged substrates. Ionenes could be adsorbed in the trans- and cis-rich state of their azobenzene units. Use of cis-rich polymer was found to be advantageous because up to three times more material could be adsorbed per dipping cycle as from the solution of the trans polymer. Alternate irradiation with UV (<370 nm) and visible (>450 nm) light allowed to switch between the trans isomer and the cis-rich photostationary state. Photoconversion of ionenes in multilayers is lower than in solution, but higher than for multilayers of azobenzene bolaamphiphiles reported recently.     

Cationic polymerization of 1,3-pentadiene I. infrared, 1H-NMR and 13C-NMR investigations on the microstructure of poly(1,3-pentadiene) synthesized with cationic catalysts

This study deals with cationic polymerization of the cis- and trans-isomers of 1,3-pentadiene. The microstructure of the polymer chains is studied by ¹H-NMR, ¹³C-NMR and IR spectroscopies. It is shown that the trans-diene gives strictly trans-1,4 and trans-1,2 residual linear insaturations, whereas the cis-isomer yields also cis-1,4, cis-1,2 and 3,4-units whose overall content can reach 10 mol-%. According to the cyclization degree of the macromolecules, ranging from 30 to 70 mol-%, the number of trans-(1,2+1,4) units varies between 33 to 65 mol-% and that of trans-1,2 units between 4 and 20 mol-%. An analytical method is proposed to evaluate the average number of rings present in the polycyclic sequences. It is found that the cyclic fragments of the polymer chains consist of bi- or tri-cyclohexane fused rings containing α tetrasubstituted double bond.     

In-situ fabrication of barium titanate@polyvinyl pyrrolidone in polyvinylidene fluoride polymer nanocomposites for dielectric capacitor applications

We have demonstrated an in situ route to design barium titanate (BT)@polyvinyl pyrrolidone (PVP) nanoparticles (NPs) in PVP/polyvinylidene fluoride (PVDF) blends. Thus, the PVP simultaneously acted as a linker and a part of the polymer matrix. We have hydrothermally synthesized the tetragonal phase of BT NPs (~150 nm). The BT NPs content was varied from 0 to 15 vol%. The resulting polymer nanocomposites generated enormous interfaces because of homogeneously dispersed BT@PVP NPs. Furthermore, the PVP simultaneously tailored the interfacial properties surrounding the BT NPs and bulk of the polymer matrix. Therefore, we achieved an enhanced maximum polarization (P_max) and energy density (U_d) of 27.9 μC cm⁻² and 13.4 J cm⁻³ (2261 kV cm⁻¹), respectively, at 7.5 vol% BT NPs loadings. At the same time, PVP/PVDF blends showed P_max and U_d of only 3.9 μC cm⁻² and 4.6 J cm⁻³ (3369 kV cm⁻¹), respectively. This simple approach of in situ nanomaterials modification will lead to development of low-cost and time-efficient dielectric capacitors.     

Ring-opening polymerization of α,β-disubstituted oxiranes by α-methoxyphenylmethylium hexachloroantimonate

α-Methoxyphenylmethylium hexachloroantimonate was used as a novel initiator for the polymerization of α,β-disubstituted oxiranes such as cyclohexene oxide (CHO) and 2-butene oxide (trans and cis) (2-BO) at ?78°C with dichloromethane or dichloromethane-toluene mixtures as solvents. The CHO polymerization mixture became turbid and the polymer precipitated in dichloromethane. The CHO polymerization proceed quantitatively in dichloromethane–toluene mixtures. The molecular weight distribution of polyCHO obtained was bimodal regardless of the solvent used. The polymerization of trans-2-BO was heterogeneous in both dichloromethane and dichloromethane–toluene mixture. The polymerization mixtures of cis-2-BO were transparent but reached a limit yield which was less than the polymer yield of trans-2-BO. Furthermore, the microstructure of the poly2-BOs were analyzed by Vandenberg's method and the results confirmed Vandenberg's finding that inversion of configuration occurs in the propagation step.     

The infrared spectrum of bis(fluorosulfonyl)imide revisited: Attractive performances of the PBE0/6-31G** model

We report a systematic investigation of the far- and mid-infrared spectra of ionic liquids (ILs) containing the bis(fluorosulfonyl)imide (FSI) anion, both in the liquid state at room temperature and in solid phases at low temperatures. We extended to lower frequencies a previous study, and we observed four additional vibration bands below 500 cm⁻¹, attributable to FSI. Moreover, DFT calculations of vibration frequencies were performed using three combinations of theory and basis set: (1) B3LYP/6-31G**, (2) B3LYP/6-311 + G(3df) and (3) PBE0/6-31G**. Model 1, largely used in the previous literature concerning ILs, shows the poorest performances; model 2, which generally gives a good agreement with the experiments, misses the vibration frequencies by ∼40 cm⁻¹ in the range 650–900 cm⁻¹ where one finds the largest spectral differences between cis- and trans-FSI; model 3 gives the best agreement with the experiments and, moreover, is much less time consuming than model 2. The comparison with calculations suggests that the band centered around 1217 cm⁻¹ is a good marker of the occurrence of the cis-FSI conformer. Finally, the bands located around 730 and 750 cm⁻¹ are attributable to cis- and trans- conformer of FSI, respectively.     

Azobenzene‐bridged diradical janus nucleobases with photo‐converted magnetic properties between antiferromagnetic and ferromagnetic couplings

We computationally design a series of azobenzene (AB)‐bridged double radicalized nucleobases, a novel kind of diradical Janus‐type nucleobases, and explore their spin coupling characteristics. Calculations prove that such diradical Janus‐bases not only normally match with their complementary bases, but also exhibit well‐defined diradical character with photo‐convertible intramolecular magnetic couplings (antiferromagnetic vs. ferromagnetic). Combination of four radical nucleobases (rG, rA, rC, rT) and photoswitch AB can yield 10 diradical Janus‐bases with different magnetic characteristics in which AB functions a bridge to mediate the spin coupling between two radical bases. The trans‐form supports mild antiferromagnetic couplings with the spin coupling constants (J) ranging from −153.6 cm⁻¹ to −50.91 cm⁻¹ while the cis‐form has weak magnetic couplings with ferromagnetic (0.22–8.50 cm⁻¹) for most of them or antiferromagnetic (−0.77, −1.73, −3.30 cm⁻¹) properties for only three. Further structural examination and frontier molecular orbital analyses indicate that the extended π conjugation for better spin polarization provides an effective through‐π‐bond pathway to mediate the spin coupling in the trans conformation while nonplanarity of the cis conformation weakens the through‐bond coupling and causes a competitive through‐space pathway and as an overall result inhibits the spin coupling between two spin moieties. Meanwhile, we also find that the J values of the cis conformation vary with their angle between the radical base and its linked phenylene. Furthermore, the magnetic properties of the diradical Janus‐bases can be significantly increased by interacting with metal ions. They also maintain a good UV absorption characteristics and there is a clear redshift compared with AB. This work provides a promising strategy for the rational design of photo‐convertible Janus‐base magnets as the magnetism‐tunable DNA building blocks. © 2018 Wiley Periodicals, Inc.     

Origin of the color of π‐conjugated columnar polymers: Poly(p‐n‐octylthiophenyl)acetylene prepared using a [Rh(norbornadiene)Cl]2 catalyst

Highly stereospecific polymerization of a novel sulfur containing aromatic acetylenes, that is, (p‐n‐octylthiophenyl)acetylene (pOctSPA), was successfully performed using the Rh complex, [Rh(norbornadiene)Cl]₂‐TEA, catalyst in the presence of various solvents under mild conditions. The resulting polymers were characterized in detail by ¹H NMR, ESR, laser Raman, diffuse reflective UV‐Vis (DRUV‐Vis), and wide angle X‐ray diffraction methods. The data showed that the resulting polymers bear cis‐transoid form, which can induce the cis‐to‐trans isomerization when the cis polymers are subjected to pressure at room temperature under vacuum, breaking rotationally the cis C?C bonds in the main‐chain giving two kinds of π‐radicals, the so‐called cis radical and trans radical as the origin of a polymer magnet like a novel spin glass material. Further, the resulting cis poly(acetylene)s were found to have a helical main‐chain, which is packed in pseudohexagonal crystal called π‐conjugated columnar or nano π‐conjugated columnar as a novel color controllable material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2836–2850, 2005