Solid-state electrochemiluminescence sensor based on the Nafion/poly(sodium 4-styrene sulfonate) composite film

An effective electrochemiluminescence (ECL) sensor based on Nafion/poly(sodium 4-styrene sulfonate) (PSS) composite film-modified ITO electrode was developed. The Nafion/PSS/Ru composite film was characterized by atomic force microscopy, UV-vis absorbance spectroscopy and electrochemical experiments. The Nafion/PSS composite film could effectively immobilize tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) via ion-exchange and electrostatic interaction. The ECL behavior of Ru(bpy)₃²⁺ immobilized in Nafion/PSS composite film was investigated using tripropylamine (TPA) as an analyte. The detection limit (S/N = 3) for TPA at the Nafion/PSS/Ru composite-modified electrode was estimated to be 3.0 nM, which is 3 orders of magnitude lower than that obtained at the Nafion/Ru modified electrode. The Nafion/PSS/Ru composite film-modified indium tin oxide (ITO) electrode also exhibited good ECL stability. In addition, this kind of immobilization approach was simple, effective, and timesaving.     

“Signal-on” Electrogenerated Chemiluminescence Biosensing Method for the Determination of Matrix Metalloproteinase 2

A simple, selective and sensitive “signal-on” electrogenerated chemiluminescence (ECL) biosensing method was developed for matrix metalloproteinase 2 (MMP-2). Ru(bpy)₃²⁺, gold nanoparticles (AuNPs) and Nafion were modified onto glassy carbon electrode (GCE) to form Ru(bpy)₃²⁺/AuNPs/Nafion/GCE as sensitive ECL platform and then ferrocene (Fc) labeled peptide was assembled onto the modified electrode to form ECL biosensing platform. The ECL intensity increased when the ECL biosensing electrode reacted with MMP-2 because of MMP-2-induced cleavage of Fc labeled peptide. The ECL method was applied to determine MMP-2 with detection limit of 0.3 ng/mL and one-step recognition, which is promising for point-of-care test of protease.     

Fabrication of a New Electrochemiluminescent Sensing Interface Based on Zinc Oxide Nanorod

A new electrochemiluminescence (ECL) sensing interface was established based on the zinc oxide nanorod in this paper. Firstly, the zinc oxide (ZnO) nanorod was prepared on an indium tin oxide (ITO) electrode surface by the method of constant current cathodic electrodeposition, on which the Nafion film was then modified, and finally ruthenium(II) tris(bipyridine) (Ru(bpy)₃²⁺) was immobilized at the ZnO nanorod/Nafion composite‐modified electrode. The sensing interface shows well ECL behaviors and perfect stability after being constant temperature treatment at 80 °C. The composite electrode was characterized by EIS, SEM and XRD. The results showed that the good stability maybe related to the water content of Nafion film.     

Determination of Reduced Nicotinamide Adenine Dinucleotide Based on Immobilization of Tris(2,2′‐bipyridyl) Ruthenium(II) in Multiwall Carbon Nanotubes/Nafion Composite Membrane

Abstract

An electrochemiluminescence (ECL) method for reduced nicotinamide adenine dinucleotide (NADH) was proposed by immobilizing tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃ ²⁺) in multiwall carbon nanotubes (MWCNTs)/Nafion composite membrane that was formed on glassy carbon electrode surface. The electrochemical and ECL behaviors of the immobilized Ru(bpy)₃ ²⁺ were investigated. The cyclic votammogram of the modified electrode in pH 7.0 phosphate buffer solution showed a couple of redox peaks at +1190 and +1060 mV at 100 mV/s. The composite film had a more open structure and a large surface area allowing faster diffusion of Ru(bpy)₃ ²⁺. The presence of MWCNTs resulted in the improved ECL sensitivity and longer‐term stability of the modified electrode. The modified electrode showed a linear response to NADH in the concentration range of 1.0×10^?6 to 1.6×10^?5 M with a detection limit of 8.2×10^?7 M.     

Electrochemiluminescence from tris(2,2′-bipyridyl)ruthenium(II)-graphene-Nafion modified electrode

An electrochemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺-graphene-Nafion composite film was developed. The graphene sheet was produced by chemical conversion of graphite, and was characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman spectroscopy. The introduction of conductive graphene into Nafion not only greatly facilitates the electron transfer of Ru(bpy)₃²⁺, but also dramatically improves the long-term stability of the sensor by inhibiting the migration of Ru(bpy)₃²⁺ into the electrochemically inactive hydrophobic region of Nafion. The ECL sensor gives a good linear range over 1 × 10⁻⁷ to 1 × 10⁻⁴ M with a detection limit of 50 nM towards the determination of tripropylamine (TPA), comparable to that obtained by Nafion-CNT. The ECL sensor keeps over 80% and 85% activity towards 0.1 mM TPA after being stored in air and in 0.1 M pH 7.5 phosphate buffer solution (PBS) for a month, respectively. The long-term stability of the modified electrode is better than electrodes modified with Nafion, Nafion-silica, Nafion-titania, or sol-gel films containing Ru(bpy)₃²⁺. Furthermore, the ECL sensor was successfully applied to the selective and sensitive determination of oxalate in urine samples.     

Decay of Ru(BPY)3 3+ in thin nafion layers catalyzed by Co(II)

Catalytic oxidation of water by Ru(bpy)₃ ³⁺ in the presence of Co²⁺ ions, well known in homogeneous solution, has been investigated in thin Nafion layers. Nafion layers on ITO electrodes were equilibrated with Ru(bpy)₃ ²⁺. Ru(bpy)₃ ³⁺ was produced by electrochemical oxidation after which the electrode was transferred into the reaction cell containing buffered Co²⁺ solution. The build up of Ru(bpy)₃ ²⁺ absorbance at 454 nm was followed spectrophotometrically. The reaction rate is proportional to [Ru(III)], [Co²⁺] and [HPO₄ ^2-]. We found no evidence for a pH effect in the range 6–8, and no inhibition by Ru(II). A limiting rate of formation of Ru(II) is observed at high Co²⁺ or phosphate ion concentrations. At high local concentration of the Ru complex in the Nafion layer (~ 0.5 M), two Ru(II) formation processes are observed, their rates differ by one order, but other features (effects of [Ru(III)], [Ru(II)], [Co²⁺], phosphate and pH) remain unchanged. These results are in contrast with homogeneous solution where the rate of build up of Ru(II) has been previously reported to be proportional to [Ru(III)], [Co²⁺] and [OH^-]², and inversely proportional to [Ru(II)]. A mechanism is proposed which accounts for these observations.     

Determination of carbamates in nature water based on the enhancement of electrochemiluminescent of Ru(bpy)(3)(2+) at the multi-wall carbon nanotube-modified electrode

A multi-wall carbon nanotube (MWNT)/Nafion composite film-modified electrode was developed in this paper, and its chemical and electrochemiluminescent (ECL) behavior of tris(2,2′-bipyridyl)ruthenium (Ru(bpy)₃²⁺) on this electrode has been investigated in detail. It has been also found that some carbamates were able to enhance the ECL intensity of Ru(bpy)₃²⁺ greatly at this modified electrode. Based on which, a sensitive and simple method for determination of pirimicarb, methomyl, aldicarb and carbofuran were developed, and the proposed method has been applied to determine the carbamates in the nature water.     

Photoelectrocatalytic oxidation of GMP on an ITO electrode modified with clay/[Ru(phen)<Subscript>2</Subscript>(dC18bpy)]<Superscript>2+</Superscript> hybrid film

An indium tin oxide (ITO) electrode modified with monolayer clay/[Ru(phen)₂(dC18bpy)]²⁺ (phen=1,10-phenanthroline, dC18bpy = 4,4′-dioctadecyl-2,2′ bipyridyl) hybrid film has been fabricated by the Langmuir-Blodgett (LB) method. Atomic force microscopy revealed that the single-layered hybrid film of clay/[Ru(phen)₂(dC18bpy)]²⁺ (denoted as Clay-Ru) was closely packed at a surface pressure of 25 mN·m⁻¹ and had a thickness of 3.4±0.5 nm. Cyclic voltammograms showed that the redox current of Ru(II) complex decreased when incorporated into the clay film, suggesting that the clay layer acts as a barrier against electron transfer. When applied to oxidizing the mononucleotide of guanosine 5′-monophosphate (GMP), a large catalytic oxidative current was achieved on the Clay-Ru(II) modified ITO electrode at the external potential above 900 mV (vs. Ag|AgCl|KCl) and, more significantly, this response was further enhanced by light irradiation (λ>360 nm), in which the photocurrent is increased about 11 times in comparison with that of a bare ITO. Mechanism of the photoelectrocatalytic effect was proposed in terms of the reduction of the photoelectrochemically generated Ru(III) complex in the Clay-Ru film by GMP. Supported by the National Natural Science Foundation of China (Grant Nos. 20471043 and 20843007), Zhejiang Provincial Natural Science Foundation (Grant Nos. Y404118 and Y408177), the “151” Distinguished Person Foundation of Zheji-ang Province of China, Zhejiang Technology Project Foundation (Grant No. 2007C21134) and Wenzhou Technology Project Foundation (Grant No. N2004B040)     

A bis(2,2′-Bipyridine) (Dipyrido[3, 2-a:2′ 3′-c]Phenazine-N4N5) Ruthenium(II)-Based Electrochemiluminescence Biosensor for Evaluation of DNA Damage

The electrochemiluminescence of bis(2, 2′-bipyridine) (dipyrido[3, 2-a:2′ 3′-c]phenazine-N₄N₅) ruthenium(II) ([Ru(bpy)₂(dppz)]²⁺) was used to monitor deoxyribonucleic acid (DNA) charge transfer with tri-n-propylamine as a coreactant. This system was used to measure damage to DNA induced by perfluorooctanoic acid. Fifteen-base pairs of double-stranded DNA with a thiol group at the 5′ end position were covalently bonded to a gold electrode. An electrochemiluminescence sensor was then constructed by incubating the modified gold electrode in [Ru(bpy)₂(dppz)]²⁺ solution for 30 min. For comparison, single-stranded DNA, well-matched double-stranded DNA, and single base-mismatched double-stranded DNA were assembled on the gold surface. The results showed that the electrochemiluminescence behavior of the DNA sensors were unique. The electrochemiluminescence decreased when the [Ru(bpy)₂(dppz)]²⁺-DNA ECL sensor was incubated in a perfluorooctanoic acid solution. The damage to DNA caused by perfluorooctanoic acid was monitored using a combination of DNA charge transfer theory and the interaction between DNA and [Ru(bpy)₂(dppz)]²⁺. The detection limit for perfluorooctanoic acid was 1 × 10^?12 mol/L. [Ru(bpy)₂(dppz)]²⁺ was shown to be a sensitive electrochemiluminescence sensor for the determination of DNA damage.     

A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Solid-state electrochemiluminescence sensor through the electrodeposition of Ru(bpy)3/AuNPs/chitosan composite film onto electrode

Tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) has been successfully immobilized onto electrode through the electrodeposition of Ru(bpy)₃²⁺/AuNPs/chitosan composite film. In the experiments, chitosan solution was first mixed with Au nanoparticles (AuNPs) and Ru(bpy)₃²⁺. Then, during chronopotentiometry experiments in this mixed solution, a porous 3D network structured film containing Ru(bpy)₃²⁺, AuNPs and chitosan has been electrodeposited onto cathode due to the deposition of chitosan when pH value is over its pK_a (6.3). The applied current density is crucial to the film thickness and the amount of the entrapped Ru(bpy)₃²⁺. Additionally, these doping Ru(bpy)₃²⁺ in the composite film maintained their intrinsic electrochemical and electrochemiluminescence activities. Consequently, this Ru(bpy)₃²⁺/AuNPs/chitosan modified electrode has been used in ECL to detect tripropylamine, and the detection limit was 5 × 10⁻¹⁰ M.     

玻碳电极上Ru(bpy)32+的吸附及其电致化学发光的研究

通过电化学循环伏安法和电致化学发光方法, 研究了Ru(bpy)₃²⁺在玻碳电极上的吸附, 研究结果表明, Ru(bpy)₃²⁺的浓度和与玻碳材料接触的时间, 直接影响了Ru(bpy)₃²⁺在玻碳上的吸附. 还考察了吸附的 在玻碳电极上被氧化后脱附的情况.     

Effect of Enzyme and Cofactor Immobilization on the Response of Ethanol Oxidation in Zirconium Phosphate Modified Biosensors

Two different self‐contained ethanol amperometric biosensors incorporating layered [Ru(phend)₂bpy]²⁺‐intercalated zirconium phosphate (ZrP) as the mediator as well as yeast‐alcohol dehydrogenase (y‐ADH) and its cofactor nicotinamide adenine dinucleotide (NAD⁺) were constructed to improve upon a design previously reported where only this mediator was immobilized in the surface of a modified electrode. In the first biosensor, a [Ru(phend)₂bpy]²⁺‐intercalated ZrP modified carbon paste electrode (CPE) was improved by immobilizing in its surface both y‐ADH and NAD⁺ using quaternized Nafion membrane. In the second biosensor, a glassy carbon electrode was modified with [Ru(phend)₂bpy]²⁺‐intercalated ZrP, y‐ADH, and NAD⁺ using Nafion as the holding matrix. Calibration plots for ethanol sensing were constructed in the presence and absence of ZrP. In the absence of ZrP in the surface of the modified glassy carbon electrode, leaching of ADH was observed as detected by UV‐vis spectrophotometry. Ethanol sensing was also tested in the presence and absence of ascorbate to measure the selectivity of the sensor for ethanol. These two ethanol biosensors were compared to a previously reported one where the y‐ADH and the NAD⁺ were in solution, not immobilized.     

Tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence sensor based on carbon nantube dispersed in sol-gel-derived titania-Nafion composite films

A highly sensitive and stable tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) electrogenerated chemiluminescence (ECL) sensor was developed based on carbon nanotube (CNT) dispersed in mesoporous composite films of sol-gel titania and perfluorosulfonated ionomer (Nafion). Single-wall (SWCNT) and multi-wall carbon nanotubes (MWCNT) can be easily dispersed in the titania-Nafion composite solution. The hydrophobic CNT in the titania-Nafion composite films coated on a glassy carbon electrode certainly increased the amount of Ru(bpy)₃²⁺ immobilized in the ECL sensor by adsorption of Ru(bpy)₃²⁺ onto CNT surface, the electrocatalytic activity towards the oxidation of hydrophobic analytes, and the electronic conductivity of the composite films. Therefore, the present ECL sensor based on the CNT-titania-Nafion showed improved ECL sensitivity for tripropylamine (TPA) compared to the ECL sensors based on both titania-Nafion composite films without CNT and pure Nafion films. The present Ru(bpy)₃²⁺ ECL sensor based on the MWCNT-titania--Nafion composite gave a linear response (R² = 0.999) for TPA concentration from 50 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 10 nM while the ECL sensors based on titania-Nafion composite without MWCNT, pure Nafion films, and MWCNT-Nafion composite gave a detection limit of 0.1 μM, 1 μM, and 50 nM, respectively. The present ECL sensor showed outstanding long-term stability (no signal loss for 4 months).     

Spectral Properties of Ruthenium(II) Mixed-Ligands Complexes with 2,2'-Bipyridyl and Phosphines

Spectral-kinetic luminescence characteristics of the complexes cis-[Ru(bpy)(dppe)X2], cis- [Ru(bpy)2(PPh₃)X](BF₄) and cis-[Ru(bpy)₂X₂] [bpy = 2,2'-bipyridyl, dppe = 1,2-bis(diphenylphosphino)ethane, PPh₃ is triphenylphosphine, X = NO₂ ^- and CN^-] in the ethanol-methanol 4:1 mixtures and adsorbed on the oxide SiO₂ or porous polyacrylonitrile polymer surface were studied. Luminescence and luminescence exitation spectra were registered at 77 and 293 K in 230-750 nm range and the luminescence decay time was measured. Introduction of phosphine ligands to the ruthenium(II) bipyridyl complexes inner sphere leads to rise in singlet and triplet state energy at the charge transfer from Ru(II) to 2,2'-bipyridyl in the series [Ru(bpy)₂X₂] < Ru(bpy)₂(PPh₃)X](BF₄) < [Ru(bpy)(dppe)X₂]. The complex adsorption on SiO₂ or polyacrylonitrile surface affects noticeably the luminescence spectro-kinetic characteristics.     

Tris(2,2′‐bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Platinized Carbon Nanotube–Zirconia–Nafion Composite Films

Mesoporous films of platinized carbon nanotube–zirconia–Nafion composite have been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium (II) (Ru(bpy)₃²⁺) on an electrode surface to yield a solid‐state electrogenerated chemiluminescence (ECL) sensor. The composite films of Pt–CNT–zirconia–Nafion exhibit much larger pore diameter (3.55 nm) than that of Nafion (2.82 nm) and thus leading to much larger ECL response for tripropylamine (TPA) because of the fast diffusion of the analyte within the films. Due to the conducting and electrocatalytic features of CNTs and Pt nanoparticles, their incorporation into the zirconia–Nafion composite films resulted in the decreased electron transfer resistance within the films. The present ECL sensor based on the Pt–CNT–zirconia–Nafion gave a linear response (R²=0.999) for TPA concentration from 3.0 nM to 1.0 mM with a remarkable detection limit (S/N=3) of 1.0 nM, which is much lower compared to those obtained with the ECL sensors based on other types of sol‐gel ceramic–Nafion composite films such as silica–Nafion and titania–Nafion.     

Electrogenerated Chemiluminescence Determination of Dopamine and Epinephrine in the Presence of Ascorbic Acid at Carbon Nanotube/Nafion‐Ru(bpy)$\rm{ {_{3}^{2+}}}$ Composite Film Modified Glassy Carbon Electrode

Based on the inhibition effect of dopamine and epinephrine on Ru(bpy) ‐tripropylamine electrogenerated chemiluminescence system, the excellent properties of carbon nanotube, and the cation permselectivity of Nafion film, an electrogenerated chemiluminescence inhibition method for determination of dopamine and epinephrine in the presence of ascorbic acid at carbon nanotube/Nafion‐Ru(bpy) composite film modified glassy carbon electrode was described. The results showed that the proposed method was sensitive and selective for the determination of dopamine and epinephine. The linear calibration range was from 1.6×10^?9 M to 3.2×10^?5 M and 5×10^?8 M to 6×10^?5 M for dopamine and epinephrine, respectively. 200‐fold excess of ascorbic acid did not interfere with the determination of 1 μM dopamine and epinephrine.     

Polyelectrolyte-based electrochemiluminescence enhancement for Ru(bpy)3 loaded by SiO2 nanoparticle carrier and its high sensitive immunoassay

In this paper the strong electrochemiluminescence (ECL) nanoparticles have been prepared based on the anionic polyelectrolyte sodium polyacrylate (PAA)-ECL enhancement for Ru(bpy)₃²⁺, which were loaded by the carrier of SiO₂ nanoparticle. There were two kinds of Ru(bpy)₃²⁺ for the as-prepared nanoparticles, the doped one and the exchanged one. The former was loaded inside the ECL nanoparticles by doping, in a form of ion-pair macromolecules PAA–Ru(bpy)₃²⁺. The corresponding ECL was enhanced about 2 times owing to the doping increase of Ru(bpy)₃²⁺. The latter was loaded on the PAA-doped Nafion membrane by ion exchange. The corresponding ECL was enhanced about 3 times owing to the ion-exchanging increase of Ru(bpy)₃²⁺. At the same time, ECL intensity of the doped-inside Ru(bpy)₃²⁺ was further enhanced 13 times because polyelectrolyte PAA in the doped membrane could obviously enhance electron transfer between the doped Ru(bpy)₃²⁺ and the working electrode. Furthermore, based on hydrophobic regions of the doped membrane antibody labeling could be easily realized by the as-prepared nanoparticles and then a high sensitive ECL immunoassay for HBsAg was developed. The linear range was between 1.0 and 100 pg mL⁻¹ (R² = 0.9912). The detection limit could be as low as 0.11 pg mL⁻¹ (signal-to-noise ratio = 3).     

Spectrocyclic Voltammetry of Ruthenium Purple Electrodeposited on a WO3/Tris(2,2′-bipyridine)-ruthenium(II)/Polymer Hybrid Film

Summary: Electrochemical reactions of Ruthenium purple, Feequation/tex2gif-stack-1.gif[Ru^II(CN)₆]₃ (RP; Fe^III-Ru^II) were studied using a spectrocyclic voltammetry (SCV) technique. The SCV measurement for an RP film coated on an ITO electrode showed a reversible redox between RP and Ruthenium white (RW; Fe^II-Ru^II) at 0.14 V vs saturated calomel reference electrode (SCE). An RP film was electrodeposited on a hybrid film of tungsten trioxide (WO₃)/tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)₃]²⁺; bpy = 2,2′-bipyridine)/poly(sodium 4-styrenesulfonate) (PSS) (denoted as WRP film) from a colloidal solution containing 0.5 mM FeCl₃, 0.5 mM K₄[Ru(CN)₆] and 40 mM KCl using a potentiodynamic multi-sweep technique. In a cyclic voltammogram (CV) of a WRP/RP film, a redox response was observed at 0.61 V in addition to essential redox responses of WRP hybrid film (a [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ redox at 1.03 V and a H_xWO₃/WO₃ redox below 0.09 V), but a redox response of RW/RP was not observed at 0.14 V. The SCV measurement for the WRP/RP film suggested that the redox response at 0.61 V is attributed to a redox of [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ interacted electrostatically with RP. It also showed that RW is oxidized to RP via [Ru(bpy)₃]²⁺/[Ru(bpy)₃]³⁺ redox and RP is reversibly reduced to RW via H_xWO₃/WO₃ redox. This unique geared electrochemical reaction for the WRP/RP film leads to a hysteresis property of an RW/RP redox.     

Study on Electrochemiluminesce of Ru(bpy3)2+ Immobilized in a Titania Sol‐Gel Membrane

The immobilization of tris(2,2′‐bipyridyl)ruthenium(II), Ru(bpy)₃²⁺, at a glassy carbon electrode was achieved by entrapping the Ru(bpy)₃²⁺ in a vapor deposited titania sol‐gel membrane. The electrogenerated chemiluminescence (ECL) of the immobilized Ru(bpy)₃²⁺ was studied. The Ru(bpy)₃²⁺ modified electrode showed a fast ECL response to both oxalate and proline. The ECL intensity was linearly related to concentrations of oxalate and proline over the ranges from 20 to 700 μmol L^?1 and 20 to 600 μmol L^?1, respectively. The detection limits for oxalate and proline at 3σ were 5.0 μmol L^?1 and 4.0 μmol L^?1, respectively. This electrode possessed good precision and stability for oxalate and proline determinations. The electrogenerated chemiluminescence mechanism of proline system was discussed. This work provided a new way for the immobilization of Ru(bpy)₃²⁺ and the application of titania sol‐gel membrane in electrogenerated chemiluminescence.