Synthesis of acrylate and norbornene polymers with pendant 2,7-bis(diarylamino)fluorene hole-transport groups

New hole-transport monomers have been synthesized in which a 2,7-(diarylamino)fluorene hole-transport functionality is linked through the 9-position of the fluorene bridge to a polymerizable acrylate or norbornene group; these monomers have been polymerized under free-radical and ring-opening metathesis polymerization (ROMP) conditions, respectively. The norbornene monomer has also been copolymerized with a cinnamate-functionalized norbornene; this copolymer can be rendered insoluble through photo-crosslinking of the cinnamate groups under UV irradiation, thus permitting the use of the polymer in organic electronic devices based upon multiple polymer layers. The norbornene monomer has also been copolymerized with dicyclopentadiene to afford insoluble crosslinked films. Time-of-flight studies indicate that the norbornene polymer has a higher hole mobility than the analogous acrylate material, consistent with the predictions of the disorder formalism.     

Crystallinity in quasi-alternating cycloolefin copolymers: Overcoming brittleness

Cycloolefin copolymers (COCs, which are produced via ethylene/cycloolefin copolymerization) and cycloolefin polymers (COPs, which are synthesized by a rather complicated two-step process via ring-opening metathesis polymerization and subsequent hydrogenation) are commercialized materials used especially widely in optical applications. Although a COP can be used after processing into a film, films made from conventional COCs are too brittle. Optical-grade COCs and COPs are generally known as amorphous polymers. By contrast, here, a quasi-alternating ethylene/norbornene copolymer (norbornene content 56 mol%), prepared from a constrained-geometry Hf complex, shows some melting (T_m) signals in a broad temperature range (150–200°C) in the first heating scan of differential scanning calorimetry (DSC) when the samples are prepared by precipitation from a toluene solution. In the second heating scan, only glass transition (T_g) signals are observed at ~140°C with disappearance of T_m signals. The quasi-alternating ethylene/norbornene copolymer has better mechanical properties (greater elongation at break) than random congeners, which do not show any melting signal, though elongation at break is still inferior to that of the COP which shows the melting signal in the first heating scan of DSC. The enhanced mechanical properties of the quasi-alternating ethylene/norbornene copolymer and commercial-grade COP may be ascribed to semicrystallinity observed in the first heating scan.     

卟啉降冰片烯聚合物的合成、表征及性质研究

本文设计合成了卟啉的降冰片烯单体,采用Grubbs催化剂与长链烷基的降冰片烯单体开环易位聚合,直接得到了卟啉降冰片烯聚合物,通过紫外-可见吸收光谱、荧光光谱、电化学等手段研究了卟啉降冰片烯聚合物的性质,与小分子单体相比,所得卟啉高分子共聚物相当好地保持了卟啉应有的光物理、电化学等特性.     

Synthesis and characterization of norbornanediol isomers and their fluorinated analogues

[reaction: see text] Fluorinated norbornene monomers exhibit the requisite properties for inclusion in 157 nm photoresists, but traditional addition and radical polymerizations with these monomers have failed. Norbornanediols provide an alternate route to these materials via condensation polymerization, and methods have been developed for the efficient synthesis of the exo-2-syn-7- and endo-2-exo-3-dihydroxynorbornanes. Synthesis of the fluorinated analogues is complicated by steric and electronic effects; however, a high-yielding synthesis of endo-2-exo-3-dihydroxynorbornane bearing a 5-endo-[2,2-bis(trifluoromethyl)hydroxyethyl] substituent is reported.     

Evaluation of norbornene- beta-cyclodextrin-based monomers and oligomers as chiral selectors by means of nonaqueous capillary electrophoresis

Norbornen-5-yl carboxylic acid and norbornen-5-ylmethylsilyl ether-based beta-cyclodextrins (beta-CDs) containing up to three norbornene ester and up to five norbornene silyl ether units have been prepared from beta-CD and norbornen-5-carboxylic chloride and norbornen-5-ylmethyldichlorosilane, respectively. Oligomers (n = 2-4) were prepared therefrom using ring-opening metathesis polymerization (ROMP). Monomeric and oligomeric substituted beta-CDs were evaluated as chiral selectors in nonaqueous capillary zone electrophoresis using 35 mM sodium bicarbonate in N-methylformamide (NMF) as background electrolyte. Both monomeric and oligomeric norbornene ester- and norbornene silyl ether-type selectors showed good enantioresolution for dansylated (DNS-) amino acids using concentrations of the chiral selector of up to 4% w/v. A significant improvement in resolution was observed upon the introduction of up to five norbornene silyl ether units into a beta-CD molecule, whereas higher degrees of substitution with norbornen-5-yl-carboxyl groups lead to a reduction in enantioresolution of DNS-amino acids. Thus, pentakis(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD turned out to be superior to mono(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD in terms of enantioresolution. Moreover, norbornene silyl ether-type selectors were found to be more efficient than norbornene ester-type selectors. Finally, oligomeric selectors were found to possess superior or at least comparable enantioselectivity in the separation of DNS-amino acids compared to the parent monomers. A maximum in enantioresolution was obtained with oligo(pentakis(norbornen-5-ylmethylhydroxysiloxyl)beta-CD).     

Towards a universal polymer backbone: design and synthesis of polymeric scaffolds containing terminal hydrogen-bonding recognition motifs at each repeating unit

Polymers containing terminal hydrogen-bonding recognition motifs based on diaminotriazine and diaminopyridine groups in their side chains for the self-assembly of appropriate receptors have been prepared by ring-opening metathesis polymerization (ROMP) of norbornenes. A new synthetic method for the preparation of norbornene monomers based on pure alkyl spacers is introduced. These monomers show unprecedented high reactivity using ROMP. To suppress self-association of diaminotriazine-based polymers, polymerizations were run in presence of N-butylthymine. The butylthymine acts as a protecting group via self-assembly onto the hydrogen-bonding sites of the polymeric scaffold, thereby solubilizing the polymer. Diaminopyridine monomers do not require the presence of a protecting group due to their low propensity to dimerize. In addition, they exhibit a high affinity for hydrogen-bonded receptors on both monomeric and polymeric level. These polymers present our first building blocks towards the design and synthesis of a "universal polymer scaffold".     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Synthesis of amphiphilic homopolymers and their self‐assembly into acid‐responsive polymeric micelles

This contribution presents a strategy for preparing amphiphilic homopolymers as building blocks for self‐assembly into supramolecular nanostructures. The synthesis begins with norbornene monomers containing oligoethylene glycols on the side chains. Ring‐opening metathesis polymerization of the monomers and subsequent dihydroxylation afford water‐soluble dihydroxylated poly(norbornene)s (PNBs). Amphiphilic modifications of the hydrophilic PNBs can be achieved by reacting 1,2‐diols on the backbones with hydrophobic dodecanals to form acetal linkages. The self‐assembly of the resulting amphiphilic PNB homopolymers affords polymeric micelles whose morphologies can be tuned by breaking the acetal linkages under acidic conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3804–3808     

Ring opening metathesis polymerisations of norbornene and norbornadiene derivatives containing oxygen: a study on the regeneration of Grubbs catalyst

Ring opening metathesis polymerisation (ROMP) of norbornene and norbornadiene derivatives containing oxygen are investigated using Grubbs well-defined ruthenium initiator. A series of 7-alkoxy norbornadiene monomers (2b-d), containing alkoxy groups with decreasing steric hindrance in the 7-position have been prepared. The ROMP reactions of monomers showed that as the reaction proceeds the initiator is consumed first and then is partially regenerated at the expense of the propagating species. A small amount of another carbene species X, giving a broad signal at 17.44 ppm, is also formed which is extremely stable in solution. The species X is an active metathesis species and is able to perform ROMP on strained cyclic olefins. ROMP of monomers without alkoxy groups in the 7-position (3, 4a, 4b, 5a and 5b) and also monomers with alkoxy groups in the 5 and/or 6 positions of norbornene (6 and 7) have been performed under similar conditions. None of these systems exhibited regeneration of the initiator and no resonances due to species X can be seen in the ¹H NMR spectra. The results confirm that the presence of oxygen in the 7-position of the norbornadiene monomer plays an important role in the process of regeneration of the initiator. It is found that the steric bulk and the position of substituents of the monomer have a pronounced influence on the extent of regeneration of the initiator.     

Facile and purification free synthesis of peptides utilizing ROMPgel- and ROMPsphere-supported coupling reagents

5-Norbornene-2-carboxaldehyde and norbornadiene were respectively converted into norbornene derivatives functionalized with fluoroformamidinium hexafluorophosphate and 2-bromo-N-methylpyridinium tetrafluoroborate residues. Both these norbornene monomers were ring opening metathesis polymerized or graft copolymerized onto polystyrene cores to produce ROMPgel and ROMPsphere peptide-coupling reagents. These were used to prepare hindered amides, dipeptides and tripeptides with minimal purification in parallel arrays.     

Pd(II) -catalyzed addition polymerizations of strained polycyclic olefins

Cationic Pd(II) -complexes with weakly coordinating ligands were used for the olefin addition polymerization of strained polycyclic olefins. The cyclic structure of the monomers remained intact during the reaction which contrasts with products obtained from the olefin metathesis polymerization. The Pd(II) -catalyzed polymerizations showed the features of a “living” polymerization, when norbornene and selected exo-substituted norbornene derivatives were used as the monomers. Endo- and exo-dicyclopentadiene, exo-1,2-dihydrodicyclopentadiene, endo, exo-1,4,5,8-dimethano-1,2,3,4,4a,5,8,8a-octahydronaphthalene and endo, exo-1,4,5,8-dimethano-1,4,4,a,5,8,8a-hexahydronaphthalene were converted into the corresponding rigid polymers. The exo-substituted monomers were found to polymerize at a higher rate than the corresponding or similar endo-substituted monomers. The polymerization of norbornadiene and the subsequent thermal elimination of cyclopentadiene resulted in the formation of polyacetylene.     

Synthesis and characterization of side‐chain liquid crystalline polymers bearing cholesterol mesogen

A series of new norbornene carboxylic cholesteryl ester monomers with and without alkyl spacers, NBCh, and NBCh‐n , respectively, were synthesized. New side‐chain liquid crystalline homopolymers, PNBCh and PNBCh‐n , were cleanly prepared using NBCh and NBCh‐n , respectively, with Grubbs 2nd generation catalyst. Molecular and structural characterization of monomers and polymers were carried out by nuclear magnetic resonance, NMR, Fourier transform infrared, FT‐IR, spectroscopy, and gel permeation chromatography, GPC. The thermal and liquid crystalline properties of the homopolymers were investigated by differential scanning calorimetry, DSC, thermogravimetric analysis, TGA, and polarized optical microscopy, POM. Small angle and wide angle X‐ray studies of PNBCh‐n in powder and fiber states not only confirmed the formation of smectic A mesophases, but also established their morphologies. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2690–2701, 2009     

Living/controlled copolymerization of acrylates with nonactivated alkenes

The living/controlled copolymerization of methyl acrylate with 1‐alkenes and norbornene derivatives through several radical polymerization techniques has been achieved. These techniques include atom transfer radical polymerization, reversible addition–fragmentation transfer polymerization, nitroxide‐mediated polymerization, and degenerative transfer polymerization. These systems display many of the characteristics of a living polymerization process: the molecular weight increases linearly with the overall conversion, but the polydispersity remains low. Novel block copolymers have been synthesized through the sequential addition of monomers or chain extension. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6175–6192, 2004     

Polynorbornene with pentafluorophenyl imide side chain groups: Synthesis and sulfonation

The mixtures of exo‐endo‐monomers and isomerically pure endo‐monomers of N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide ( 2a ) and N‐phenyl‐norbornene‐5,6‐dicarboximide ( 2b ) were synthesized and polymerized via ring opening metathesis polymerization using bis(tricyclohexylphosphine) benzylidene ruthenium ( IV ) dichloride ( I ) and tricyclohexylphosphine [1,3‐bis(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene][benzylidene] ruthenium dichloride ( II ). Ring opening metathesis polymerization of mixtures of exo‐endo‐monomers ( 2a ) and ( 2b ) and pure endo‐ 2b gave the corresponding high molecular weights poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) ( 3a ) and poly(N‐phenyl‐norbornene‐5,6‐dicarboximide) ( 3b ). The isomerically pure endo‐ 2a did not polymerize by I in these conditions, since I is the least active catalyst and endo‐ 2a is the least active monomer because of the intramolecular complex formation between the Ru active center and the fluorine atom of ring‐opened endo‐ 2a on the one hand and steric hindrances caused by the pentafluorinated ring on the other. The quantitative hydrogenation of the polymer 3a , at room temperature and 115 bar, was achieved by a Wilkinson's catalyst. The new polynorbornene bearing highly fluorinated sulfonic acid groups (5) was obtained by the reaction of the hydrogenated poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) (4) with sodium 4‐hydroxybenzenesulfonate dihydrate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2925–2933, 2010     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Ethylene‐Norbornene Terpolymerization with 5‐Vinyl‐2‐norbornene Using Single‐Site Catalysts

The incorporation of 5‐vinyl‐2‐norbornene (VNB) into ethylene‐norbornene copolymer was investigated with catalysts [Ph₂C(Fluo)(Cp)]ZrCl₂ ( 1 ), rac‐[Et(Ind)₂]ZrCl₂ ( 2 ), and [Me₂Si(Me₄Cp)^tBuN]TiCl₂ ( 3 ) in the presence of MAO by terpolymerizing different amounts of 5‐vinyl‐2‐norbornene with constant amounts of ethylene and norbornene at 60°C. The highest cycloolefin incorporations and highest activity in terpolymerizations were achieved with 1 . The distribution of the monomers in the terpolymer chain was determined by NMR spectroscopy. As confirmed by XRD and DSC analysis, catalysts 1 and 3 produced amorphous terpolymer, whereas 2 yielded terpolymer with crystalline fragments of long ethylene sequences. When compared with poly‐(ethylene‐co‐norbornene), VNB increased both the glass transition temperatures and molar masses of terpolymers produced with the constrained geometry catalyst whereas decreased those for the metallocenes.     

Synthesis of soluble donor-acceptor double-cable polymers based on polythiophene and tetracyanoanthraquinodimethane (TCAQ)

[structure: see text] Novel suitably functionalized tetracyanoanthraquinodimethane (TCAQ) derivatives covalently linked to thiophene moieties have been synthesized. The thiophene-based monomers have been chemically polymerized and copolymerized to yield new and soluble donor-acceptor double-cable polymers. The absorption and emission data reveal that the optical properties can be finely tuned by modifying the ratio of monomers in the copolymerization process.     

Tuning the hemolytic and antibacterial activities of amphiphilic polynorbornene derivatives

Amphiphilic cationic polynorbornene derivatives, soluble in water, were prepared from modular norbornene monomers, with a wide range of molecular weights (M(n) = 1600-137 500 g/mol) and narrow polydispersities (PDI = 1.1-1.3). The antibacterial activity determined by growth inhibition assays and the hemolytic activity against human red blood cells were measured and compared to determine the selectivity of the polymers for bacterial over mammalian cells. The effects of monomer repeat unit hydrophobicity and polymer molecular weight on antibacterial and hemolytic activities were determined. The hydrophobicity of the repeat unit was observed to have dramatic effects on antibacterial and hemolytic activities. Lipid membrane disruption activities of the polymers was confirmed by measuring polymer-induced dye leakage from large unilamellar vesicles. By tuning the overall hydrophobicity of the polymer through random copolymerizations of modular norbornene derivatives, highly selective, nonhemolytic antibacterial activities were obtained. For appropriate monomer composition, selectivity against bacteria versus human red blood cells was determined to be over 100.     

Cis-selective ring-opening metathesis polymerization with ruthenium catalysts

Cis-selective ring-opening metathesis polymerization of several monocyclic alkenes as well as norbornene and oxanorbornene-type monomers using a C-H activated, ruthenium-based metathesis catalyst is reported. The cis content of the isolated polymers depended heavily on the monomer structure and temperature. A cis content as high as 96% could be obtained by lowering the temperature of the polymerization.     

Development and application of highly efficient ruthenium-based catalysts for the ring opening metathesis polymerization

Various bisallylic ruthenium(IV) complexes were synthesized and tested as catalysts for the ring opening metathesis polymerization (ROMP) of norbornene. In presence of cocatalysts such as silanes or certain diazoalkanes a significant increase of the catalytic activity could be observed. With these highly efficient systems the ROMP of diolefinic norbornene derivatives (dicyclopentadiene, 5-ethylidene-2-norbornene, norbornadiene) and monomers containing functional groups was achieved (e.g. alcohols, acids, esters, amides, imides, ketones, aldehydes, …).